diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/asm-generic/ioctls.h | 8 | ||||
| -rw-r--r-- | include/asm-generic/termbits.h | 1 | ||||
| -rw-r--r-- | include/linux/console_struct.h | 4 | ||||
| -rw-r--r-- | include/linux/fb.h | 4 | ||||
| -rw-r--r-- | include/linux/istallion.h | 2 | ||||
| -rw-r--r-- | include/linux/serial.h | 9 | ||||
| -rw-r--r-- | include/linux/serial_8250.h | 5 | ||||
| -rw-r--r-- | include/linux/serial_core.h | 11 | ||||
| -rw-r--r-- | include/linux/serial_mfd.h | 47 | ||||
| -rw-r--r-- | include/linux/serial_reg.h | 16 | ||||
| -rw-r--r-- | include/linux/tty.h | 52 | ||||
| -rw-r--r-- | include/linux/vt_kern.h | 64 |
12 files changed, 202 insertions, 21 deletions
diff --git a/include/asm-generic/ioctls.h b/include/asm-generic/ioctls.h index a799e20a769e..8554cb6a81b9 100644 --- a/include/asm-generic/ioctls.h +++ b/include/asm-generic/ioctls.h @@ -69,6 +69,7 @@ #define TCSETX 0x5433 #define TCSETXF 0x5434 #define TCSETXW 0x5435 +#define TIOCSIG _IOW('T', 0x36, int) /* pty: generate signal */ #define FIONCLEX 0x5450 #define FIOCLEX 0x5451 @@ -87,12 +88,10 @@ #define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */ /* - * some architectures define FIOQSIZE as 0x545E, which is used for - * TIOCGHAYESESP on others + * Some arches already define FIOQSIZE due to a historical + * conflict with a Hayes modem-specific ioctl value. */ #ifndef FIOQSIZE -# define TIOCGHAYESESP 0x545E /* Get Hayes ESP configuration */ -# define TIOCSHAYESESP 0x545F /* Set Hayes ESP configuration */ # define FIOQSIZE 0x5460 #endif @@ -104,6 +103,7 @@ #define TIOCPKT_START 8 #define TIOCPKT_NOSTOP 16 #define TIOCPKT_DOSTOP 32 +#define TIOCPKT_IOCTL 64 #define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ diff --git a/include/asm-generic/termbits.h b/include/asm-generic/termbits.h index 1c9773d48cb0..232b4781aef3 100644 --- a/include/asm-generic/termbits.h +++ b/include/asm-generic/termbits.h @@ -178,6 +178,7 @@ struct ktermios { #define FLUSHO 0010000 #define PENDIN 0040000 #define IEXTEN 0100000 +#define EXTPROC 0200000 /* tcflow() and TCXONC use these */ #define TCOOFF 0 diff --git a/include/linux/console_struct.h b/include/linux/console_struct.h index 38fe59dc89ae..7f0c32908568 100644 --- a/include/linux/console_struct.h +++ b/include/linux/console_struct.h @@ -21,6 +21,8 @@ struct vt_struct; #define NPAR 16 struct vc_data { + struct tty_port port; /* Upper level data */ + unsigned short vc_num; /* Console number */ unsigned int vc_cols; /* [#] Console size */ unsigned int vc_rows; @@ -56,7 +58,6 @@ struct vc_data { /* VT terminal data */ unsigned int vc_state; /* Escape sequence parser state */ unsigned int vc_npar,vc_par[NPAR]; /* Parameters of current escape sequence */ - struct tty_struct *vc_tty; /* TTY we are attached to */ /* data for manual vt switching */ struct vt_mode vt_mode; struct pid *vt_pid; @@ -105,6 +106,7 @@ struct vc_data { struct vc_data **vc_display_fg; /* [!] Ptr to var holding fg console for this display */ unsigned long vc_uni_pagedir; unsigned long *vc_uni_pagedir_loc; /* [!] Location of uni_pagedir variable for this console */ + bool vc_panic_force_write; /* when oops/panic this VC can accept forced output/blanking */ /* additional information is in vt_kern.h */ }; diff --git a/include/linux/fb.h b/include/linux/fb.h index 0c5659c41b01..f0268deca658 100644 --- a/include/linux/fb.h +++ b/include/linux/fb.h @@ -825,6 +825,10 @@ struct fb_tile_ops { */ #define FBINFO_BE_MATH 0x100000 +/* report to the VT layer that this fb driver can accept forced console + output like oopses */ +#define FBINFO_CAN_FORCE_OUTPUT 0x200000 + struct fb_info { int node; int flags; diff --git a/include/linux/istallion.h b/include/linux/istallion.h index 7faca98c7d14..ad700a60c158 100644 --- a/include/linux/istallion.h +++ b/include/linux/istallion.h @@ -86,7 +86,7 @@ struct stlibrd { unsigned long magic; unsigned int brdnr; unsigned int brdtype; - unsigned int state; + unsigned long state; unsigned int nrpanels; unsigned int nrports; unsigned int nrdevs; diff --git a/include/linux/serial.h b/include/linux/serial.h index c8613c3ff9d3..1ebc694a6d52 100644 --- a/include/linux/serial.h +++ b/include/linux/serial.h @@ -77,7 +77,8 @@ struct serial_struct { #define PORT_16654 11 #define PORT_16850 12 #define PORT_RSA 13 /* RSA-DV II/S card */ -#define PORT_MAX 13 +#define PORT_U6_16550A 14 +#define PORT_MAX 14 #define SERIAL_IO_PORT 0 #define SERIAL_IO_HUB6 1 @@ -151,7 +152,7 @@ struct serial_uart_config { #define ASYNC_BUGGY_UART (1U << ASYNCB_BUGGY_UART) #define ASYNC_AUTOPROBE (1U << ASYNCB_AUTOPROBE) -#define ASYNC_FLAGS ((1U << ASYNCB_LAST_USER) - 1) +#define ASYNC_FLAGS ((1U << (ASYNCB_LAST_USER + 1)) - 1) #define ASYNC_USR_MASK (ASYNC_SPD_HI|ASYNC_SPD_VHI| \ ASYNC_CALLOUT_NOHUP|ASYNC_SPD_SHI|ASYNC_LOW_LATENCY) #define ASYNC_SPD_CUST (ASYNC_SPD_HI|ASYNC_SPD_VHI) @@ -210,8 +211,10 @@ struct serial_rs485 { #define SER_RS485_ENABLED (1 << 0) #define SER_RS485_RTS_ON_SEND (1 << 1) #define SER_RS485_RTS_AFTER_SEND (1 << 2) +#define SER_RS485_RTS_BEFORE_SEND (1 << 3) __u32 delay_rts_before_send; /* Milliseconds */ - __u32 padding[6]; /* Memory is cheap, new structs + __u32 delay_rts_after_send; /* Milliseconds */ + __u32 padding[5]; /* Memory is cheap, new structs are a royal PITA .. */ }; diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h index fb46aba11fb5..7638deaaba65 100644 --- a/include/linux/serial_8250.h +++ b/include/linux/serial_8250.h @@ -32,6 +32,9 @@ struct plat_serial8250_port { unsigned int type; /* If UPF_FIXED_TYPE */ unsigned int (*serial_in)(struct uart_port *, int); void (*serial_out)(struct uart_port *, int, int); + void (*set_termios)(struct uart_port *, + struct ktermios *new, + struct ktermios *old); }; /* @@ -71,5 +74,7 @@ extern int early_serial_setup(struct uart_port *port); extern int serial8250_find_port(struct uart_port *p); extern int serial8250_find_port_for_earlycon(void); extern int setup_early_serial8250_console(char *cmdline); +extern void serial8250_do_set_termios(struct uart_port *port, + struct ktermios *termios, struct ktermios *old); #endif diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index f10db6e5f3b5..8129ca2d57e3 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -186,6 +186,12 @@ #define PORT_ALTERA_JTAGUART 91 #define PORT_ALTERA_UART 92 +/* MAX3107 */ +#define PORT_MAX3107 94 + +/* High Speed UART for Medfield */ +#define PORT_MFD 95 + #ifdef __KERNEL__ #include <linux/compiler.h> @@ -220,7 +226,7 @@ struct uart_ops { void (*flush_buffer)(struct uart_port *); void (*set_termios)(struct uart_port *, struct ktermios *new, struct ktermios *old); - void (*set_ldisc)(struct uart_port *); + void (*set_ldisc)(struct uart_port *, int new); void (*pm)(struct uart_port *, unsigned int state, unsigned int oldstate); int (*set_wake)(struct uart_port *, unsigned int state); @@ -276,6 +282,9 @@ struct uart_port { unsigned char __iomem *membase; /* read/write[bwl] */ unsigned int (*serial_in)(struct uart_port *, int); void (*serial_out)(struct uart_port *, int, int); + void (*set_termios)(struct uart_port *, + struct ktermios *new, + struct ktermios *old); unsigned int irq; /* irq number */ unsigned long irqflags; /* irq flags */ unsigned int uartclk; /* base uart clock */ diff --git a/include/linux/serial_mfd.h b/include/linux/serial_mfd.h new file mode 100644 index 000000000000..2b071e0b034d --- /dev/null +++ b/include/linux/serial_mfd.h @@ -0,0 +1,47 @@ +#ifndef _SERIAL_MFD_H_ +#define _SERIAL_MFD_H_ + +/* HW register offset definition */ +#define UART_FOR 0x08 +#define UART_PS 0x0C +#define UART_MUL 0x0D +#define UART_DIV 0x0E + +#define HSU_GBL_IEN 0x0 +#define HSU_GBL_IST 0x4 + +#define HSU_GBL_INT_BIT_PORT0 0x0 +#define HSU_GBL_INT_BIT_PORT1 0x1 +#define HSU_GBL_INT_BIT_PORT2 0x2 +#define HSU_GBL_INT_BIT_IRI 0x3 +#define HSU_GBL_INT_BIT_HDLC 0x4 +#define HSU_GBL_INT_BIT_DMA 0x5 + +#define HSU_GBL_ISR 0x8 +#define HSU_GBL_DMASR 0x400 +#define HSU_GBL_DMAISR 0x404 + +#define HSU_PORT_REG_OFFSET 0x80 +#define HSU_PORT0_REG_OFFSET 0x80 +#define HSU_PORT1_REG_OFFSET 0x100 +#define HSU_PORT2_REG_OFFSET 0x180 +#define HSU_PORT_REG_LENGTH 0x80 + +#define HSU_DMA_CHANS_REG_OFFSET 0x500 +#define HSU_DMA_CHANS_REG_LENGTH 0x40 + +#define HSU_CH_SR 0x0 /* channel status reg */ +#define HSU_CH_CR 0x4 /* control reg */ +#define HSU_CH_DCR 0x8 /* descriptor control reg */ +#define HSU_CH_BSR 0x10 /* max fifo buffer size reg */ +#define HSU_CH_MOTSR 0x14 /* minimum ocp transfer size */ +#define HSU_CH_D0SAR 0x20 /* desc 0 start addr */ +#define HSU_CH_D0TSR 0x24 /* desc 0 transfer size */ +#define HSU_CH_D1SAR 0x28 +#define HSU_CH_D1TSR 0x2C +#define HSU_CH_D2SAR 0x30 +#define HSU_CH_D2TSR 0x34 +#define HSU_CH_D3SAR 0x38 +#define HSU_CH_D3TSR 0x3C + +#endif diff --git a/include/linux/serial_reg.h b/include/linux/serial_reg.h index cf9327c051ad..c7a0ce11cd47 100644 --- a/include/linux/serial_reg.h +++ b/include/linux/serial_reg.h @@ -221,8 +221,24 @@ #define UART_FCR_PXAR16 0x80 /* receive FIFO threshold = 16 */ #define UART_FCR_PXAR32 0xc0 /* receive FIFO threshold = 32 */ +/* + * Intel MID on-chip HSU (High Speed UART) defined bits + */ +#define UART_FCR_HSU_64_1B 0x00 /* receive FIFO treshold = 1 */ +#define UART_FCR_HSU_64_16B 0x40 /* receive FIFO treshold = 16 */ +#define UART_FCR_HSU_64_32B 0x80 /* receive FIFO treshold = 32 */ +#define UART_FCR_HSU_64_56B 0xc0 /* receive FIFO treshold = 56 */ + +#define UART_FCR_HSU_16_1B 0x00 /* receive FIFO treshold = 1 */ +#define UART_FCR_HSU_16_4B 0x40 /* receive FIFO treshold = 4 */ +#define UART_FCR_HSU_16_8B 0x80 /* receive FIFO treshold = 8 */ +#define UART_FCR_HSU_16_14B 0xc0 /* receive FIFO treshold = 14 */ +#define UART_FCR_HSU_64B_FIFO 0x20 /* chose 64 bytes FIFO */ +#define UART_FCR_HSU_16B_FIFO 0x00 /* chose 16 bytes FIFO */ +#define UART_FCR_HALF_EMPT_TXI 0x00 /* trigger TX_EMPT IRQ for half empty */ +#define UART_FCR_FULL_EMPT_TXI 0x08 /* trigger TX_EMPT IRQ for full empty */ /* * These register definitions are for the 16C950 diff --git a/include/linux/tty.h b/include/linux/tty.h index 7802a243ee13..1437da3ddc62 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -13,6 +13,7 @@ #include <linux/tty_driver.h> #include <linux/tty_ldisc.h> #include <linux/mutex.h> +#include <linux/smp_lock.h> #include <asm/system.h> @@ -179,6 +180,7 @@ struct tty_bufhead { #define L_FLUSHO(tty) _L_FLAG((tty), FLUSHO) #define L_PENDIN(tty) _L_FLAG((tty), PENDIN) #define L_IEXTEN(tty) _L_FLAG((tty), IEXTEN) +#define L_EXTPROC(tty) _L_FLAG((tty), EXTPROC) struct device; struct signal_struct; @@ -415,6 +417,7 @@ extern int is_ignored(int sig); extern int tty_signal(int sig, struct tty_struct *tty); extern void tty_hangup(struct tty_struct *tty); extern void tty_vhangup(struct tty_struct *tty); +extern void tty_vhangup_locked(struct tty_struct *tty); extern void tty_vhangup_self(void); extern void tty_unhangup(struct file *filp); extern int tty_hung_up_p(struct file *filp); @@ -575,5 +578,54 @@ extern int vt_ioctl(struct tty_struct *tty, struct file *file, extern long vt_compat_ioctl(struct tty_struct *tty, struct file * file, unsigned int cmd, unsigned long arg); +/* tty_mutex.c */ +/* functions for preparation of BKL removal */ +extern void __lockfunc tty_lock(void) __acquires(tty_lock); +extern void __lockfunc tty_unlock(void) __releases(tty_lock); +extern struct task_struct *__big_tty_mutex_owner; +#define tty_locked() (current == __big_tty_mutex_owner) + +/* + * wait_event_interruptible_tty -- wait for a condition with the tty lock held + * + * The condition we are waiting for might take a long time to + * become true, or might depend on another thread taking the + * BTM. In either case, we need to drop the BTM to guarantee + * forward progress. This is a leftover from the conversion + * from the BKL and should eventually get removed as the BTM + * falls out of use. + * + * Do not use in new code. + */ +#define wait_event_interruptible_tty(wq, condition) \ +({ \ + int __ret = 0; \ + if (!(condition)) { \ + __wait_event_interruptible_tty(wq, condition, __ret); \ + } \ + __ret; \ +}) + +#define __wait_event_interruptible_tty(wq, condition, ret) \ +do { \ + DEFINE_WAIT(__wait); \ + \ + for (;;) { \ + prepare_to_wait(&wq, &__wait, TASK_INTERRUPTIBLE); \ + if (condition) \ + break; \ + if (!signal_pending(current)) { \ + tty_unlock(); \ + schedule(); \ + tty_lock(); \ + continue; \ + } \ + ret = -ERESTARTSYS; \ + break; \ + } \ + finish_wait(&wq, &__wait); \ +} while (0) + + #endif /* __KERNEL__ */ #endif diff --git a/include/linux/vt_kern.h b/include/linux/vt_kern.h index 7f56db4a79f0..6625cc1ab758 100644 --- a/include/linux/vt_kern.h +++ b/include/linux/vt_kern.h @@ -76,17 +76,52 @@ int con_copy_unimap(struct vc_data *dst_vc, struct vc_data *src_vc); #define vc_translate(vc, c) ((vc)->vc_translate[(c) | \ ((vc)->vc_toggle_meta ? 0x80 : 0)]) #else -#define con_set_trans_old(arg) (0) -#define con_get_trans_old(arg) (-EINVAL) -#define con_set_trans_new(arg) (0) -#define con_get_trans_new(arg) (-EINVAL) -#define con_clear_unimap(vc, ui) (0) -#define con_set_unimap(vc, ct, list) (0) -#define con_set_default_unimap(vc) (0) -#define con_copy_unimap(d, s) (0) -#define con_get_unimap(vc, ct, uct, list) (-EINVAL) -#define con_free_unimap(vc) do { ; } while (0) -#define con_protect_unimap(vc, rdonly) do { ; } while (0) +static inline int con_set_trans_old(unsigned char __user *table) +{ + return 0; +} +static inline int con_get_trans_old(unsigned char __user *table) +{ + return -EINVAL; +} +static inline int con_set_trans_new(unsigned short __user *table) +{ + return 0; +} +static inline int con_get_trans_new(unsigned short __user *table) +{ + return -EINVAL; +} +static inline int con_clear_unimap(struct vc_data *vc, struct unimapinit *ui) +{ + return 0; +} +static inline +int con_set_unimap(struct vc_data *vc, ushort ct, struct unipair __user *list) +{ + return 0; +} +static inline +int con_get_unimap(struct vc_data *vc, ushort ct, ushort __user *uct, + struct unipair __user *list) +{ + return -EINVAL; +} +static inline int con_set_default_unimap(struct vc_data *vc) +{ + return 0; +} +static inline void con_free_unimap(struct vc_data *vc) +{ +} +static inline void con_protect_unimap(struct vc_data *vc, int rdonly) +{ +} +static inline +int con_copy_unimap(struct vc_data *dst_vc, struct vc_data *src_vc) +{ + return 0; +} #define vc_translate(vc, c) (c) #endif @@ -100,6 +135,13 @@ extern int unbind_con_driver(const struct consw *csw, int first, int last, int deflt); int vty_init(const struct file_operations *console_fops); +static inline bool vt_force_oops_output(struct vc_data *vc) +{ + if (oops_in_progress && vc->vc_panic_force_write) + return true; + return false; +} + /* * vc_screen.c shares this temporary buffer with the console write code so that * we can easily avoid touching user space while holding the console spinlock. |