diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/drm/drm_atomic.h | 14 | ||||
| -rw-r--r-- | include/drm/drm_bridge.h | 26 | ||||
| -rw-r--r-- | include/drm/drm_connector.h | 30 | ||||
| -rw-r--r-- | include/drm/drm_crtc.h | 15 | ||||
| -rw-r--r-- | include/drm/drm_file.h | 7 | ||||
| -rw-r--r-- | include/drm/drm_mm.h | 34 | ||||
| -rw-r--r-- | include/drm/drm_mode_config.h | 28 | ||||
| -rw-r--r-- | include/drm/drm_modeset_helper_vtables.h | 11 | ||||
| -rw-r--r-- | include/drm/drm_panel.h | 1 | ||||
| -rw-r--r-- | include/drm/drm_plane.h | 9 | ||||
| -rw-r--r-- | include/drm/drm_prime.h | 6 | ||||
| -rw-r--r-- | include/drm/drm_writeback.h | 130 | ||||
| -rw-r--r-- | include/linux/dma-buf.h | 21 | ||||
| -rw-r--r-- | include/uapi/drm/drm.h | 9 | ||||
| -rw-r--r-- | include/uapi/drm/drm_fourcc.h | 59 | ||||
| -rw-r--r-- | include/uapi/drm/drm_mode.h | 8 |
16 files changed, 376 insertions, 32 deletions
diff --git a/include/drm/drm_atomic.h b/include/drm/drm_atomic.h index a57a8aa90ffb..da9d95a19580 100644 --- a/include/drm/drm_atomic.h +++ b/include/drm/drm_atomic.h @@ -160,6 +160,14 @@ struct __drm_crtcs_state { struct __drm_connnectors_state { struct drm_connector *ptr; struct drm_connector_state *state, *old_state, *new_state; + /** + * @out_fence_ptr: + * + * User-provided pointer which the kernel uses to return a sync_file + * file descriptor. Used by writeback connectors to signal completion of + * the writeback. + */ + s32 __user *out_fence_ptr; }; struct drm_private_obj; @@ -594,6 +602,9 @@ void drm_atomic_set_fence_for_plane(struct drm_plane_state *plane_state, int __must_check drm_atomic_set_crtc_for_connector(struct drm_connector_state *conn_state, struct drm_crtc *crtc); +int drm_atomic_set_writeback_fb_for_connector( + struct drm_connector_state *conn_state, + struct drm_framebuffer *fb); int __must_check drm_atomic_add_affected_connectors(struct drm_atomic_state *state, struct drm_crtc *crtc); @@ -601,9 +612,6 @@ int __must_check drm_atomic_add_affected_planes(struct drm_atomic_state *state, struct drm_crtc *crtc); -void -drm_atomic_clean_old_fb(struct drm_device *dev, unsigned plane_mask, int ret); - int __must_check drm_atomic_check_only(struct drm_atomic_state *state); int __must_check drm_atomic_commit(struct drm_atomic_state *state); int __must_check drm_atomic_nonblocking_commit(struct drm_atomic_state *state); diff --git a/include/drm/drm_bridge.h b/include/drm/drm_bridge.h index 3270fec46979..70131ab57e8f 100644 --- a/include/drm/drm_bridge.h +++ b/include/drm/drm_bridge.h @@ -97,7 +97,7 @@ struct drm_bridge_funcs { /** * @mode_fixup: * - * This callback is used to validate and adjust a mode. The paramater + * This callback is used to validate and adjust a mode. The parameter * mode is the display mode that should be fed to the next element in * the display chain, either the final &drm_connector or the next * &drm_bridge. The parameter adjusted_mode is the input mode the bridge @@ -178,6 +178,22 @@ struct drm_bridge_funcs { * then this would be &drm_encoder_helper_funcs.mode_set. The display * pipe (i.e. clocks and timing signals) is off when this function is * called. + * + * The adjusted_mode parameter is the mode output by the CRTC for the + * first bridge in the chain. It can be different from the mode + * parameter that contains the desired mode for the connector at the end + * of the bridges chain, for instance when the first bridge in the chain + * performs scaling. The adjusted mode is mostly useful for the first + * bridge in the chain and is likely irrelevant for the other bridges. + * + * For atomic drivers the adjusted_mode is the mode stored in + * &drm_crtc_state.adjusted_mode. + * + * NOTE: + * + * If a need arises to store and access modes adjusted for other + * locations than the connection between the CRTC and the first bridge, + * the DRM framework will have to be extended with DRM bridge states. */ void (*mode_set)(struct drm_bridge *bridge, struct drm_display_mode *mode, @@ -285,15 +301,15 @@ int drm_bridge_attach(struct drm_encoder *encoder, struct drm_bridge *bridge, struct drm_bridge *previous); bool drm_bridge_mode_fixup(struct drm_bridge *bridge, - const struct drm_display_mode *mode, - struct drm_display_mode *adjusted_mode); + const struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode); enum drm_mode_status drm_bridge_mode_valid(struct drm_bridge *bridge, const struct drm_display_mode *mode); void drm_bridge_disable(struct drm_bridge *bridge); void drm_bridge_post_disable(struct drm_bridge *bridge); void drm_bridge_mode_set(struct drm_bridge *bridge, - struct drm_display_mode *mode, - struct drm_display_mode *adjusted_mode); + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode); void drm_bridge_pre_enable(struct drm_bridge *bridge); void drm_bridge_enable(struct drm_bridge *bridge); diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h index 675cc3f8cf85..14ab58ade87f 100644 --- a/include/drm/drm_connector.h +++ b/include/drm/drm_connector.h @@ -419,6 +419,14 @@ struct drm_connector_state { enum hdmi_picture_aspect picture_aspect_ratio; /** + * @content_type: Connector property to control the + * HDMI infoframe content type setting. + * The %DRM_MODE_CONTENT_TYPE_\* values much + * match the values. + */ + unsigned int content_type; + + /** * @scaling_mode: Connector property to control the * upscaling, mostly used for built-in panels. */ @@ -429,6 +437,19 @@ struct drm_connector_state { * protection. This is most commonly used for HDCP. */ unsigned int content_protection; + + /** + * @writeback_job: Writeback job for writeback connectors + * + * Holds the framebuffer and out-fence for a writeback connector. As + * the writeback completion may be asynchronous to the normal commit + * cycle, the writeback job lifetime is managed separately from the + * normal atomic state by this object. + * + * See also: drm_writeback_queue_job() and + * drm_writeback_signal_completion() + */ + struct drm_writeback_job *writeback_job; }; /** @@ -608,6 +629,8 @@ struct drm_connector_funcs { * cleaned up by calling the @atomic_destroy_state hook in this * structure. * + * This callback is mandatory for atomic drivers. + * * Atomic drivers which don't subclass &struct drm_connector_state should use * drm_atomic_helper_connector_duplicate_state(). Drivers that subclass the * state structure to extend it with driver-private state should use @@ -634,6 +657,8 @@ struct drm_connector_funcs { * * Destroy a state duplicated with @atomic_duplicate_state and release * or unreference all resources it references + * + * This callback is mandatory for atomic drivers. */ void (*atomic_destroy_state)(struct drm_connector *connector, struct drm_connector_state *state); @@ -1089,11 +1114,16 @@ int drm_mode_create_tv_properties(struct drm_device *dev, unsigned int num_modes, const char * const modes[]); int drm_mode_create_scaling_mode_property(struct drm_device *dev); +int drm_connector_attach_content_type_property(struct drm_connector *dev); int drm_connector_attach_scaling_mode_property(struct drm_connector *connector, u32 scaling_mode_mask); int drm_connector_attach_content_protection_property( struct drm_connector *connector); int drm_mode_create_aspect_ratio_property(struct drm_device *dev); +int drm_mode_create_content_type_property(struct drm_device *dev); +void drm_hdmi_avi_infoframe_content_type(struct hdmi_avi_infoframe *frame, + const struct drm_connector_state *conn_state); + int drm_mode_create_suggested_offset_properties(struct drm_device *dev); int drm_mode_connector_set_path_property(struct drm_connector *connector, diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h index a2d81d2907a9..23eddbccab10 100644 --- a/include/drm/drm_crtc.h +++ b/include/drm/drm_crtc.h @@ -134,10 +134,13 @@ struct drm_crtc_state { * * Internal display timings which can be used by the driver to handle * differences between the mode requested by userspace in @mode and what - * is actually programmed into the hardware. It is purely driver - * implementation defined what exactly this adjusted mode means. Usually - * it is used to store the hardware display timings used between the - * CRTC and encoder blocks. + * is actually programmed into the hardware. + * + * For drivers using drm_bridge, this stores hardware display timings + * used between the CRTC and the first bridge. For other drivers, the + * meaning of the adjusted_mode field is purely driver implementation + * defined information, and will usually be used to store the hardware + * display timings used between the CRTC and encoder blocks. */ struct drm_display_mode adjusted_mode; @@ -503,6 +506,8 @@ struct drm_crtc_funcs { * cleaned up by calling the @atomic_destroy_state hook in this * structure. * + * This callback is mandatory for atomic drivers. + * * Atomic drivers which don't subclass &struct drm_crtc_state should use * drm_atomic_helper_crtc_duplicate_state(). Drivers that subclass the * state structure to extend it with driver-private state should use @@ -529,6 +534,8 @@ struct drm_crtc_funcs { * * Destroy a state duplicated with @atomic_duplicate_state and release * or unreference all resources it references + * + * This callback is mandatory for atomic drivers. */ void (*atomic_destroy_state)(struct drm_crtc *crtc, struct drm_crtc_state *state); diff --git a/include/drm/drm_file.h b/include/drm/drm_file.h index 027ac16da3d1..26485acc51d7 100644 --- a/include/drm/drm_file.h +++ b/include/drm/drm_file.h @@ -193,6 +193,13 @@ struct drm_file { unsigned aspect_ratio_allowed:1; /** + * @writeback_connectors: + * + * True if client understands writeback connectors + */ + unsigned writeback_connectors:1; + + /** * @is_master: * * This client is the creator of @master. Protected by struct diff --git a/include/drm/drm_mm.h b/include/drm/drm_mm.h index 101f566ae43d..2c3bbb43c7d1 100644 --- a/include/drm/drm_mm.h +++ b/include/drm/drm_mm.h @@ -109,6 +109,38 @@ enum drm_mm_insert_mode { * Allocates the node from the bottom of the found hole. */ DRM_MM_INSERT_EVICT, + + /** + * @DRM_MM_INSERT_ONCE: + * + * Only check the first hole for suitablity and report -ENOSPC + * immediately otherwise, rather than check every hole until a + * suitable one is found. Can only be used in conjunction with another + * search method such as DRM_MM_INSERT_HIGH or DRM_MM_INSERT_LOW. + */ + DRM_MM_INSERT_ONCE = BIT(31), + + /** + * @DRM_MM_INSERT_HIGHEST: + * + * Only check the highest hole (the hole with the largest address) and + * insert the node at the top of the hole or report -ENOSPC if + * unsuitable. + * + * Does not search all holes. + */ + DRM_MM_INSERT_HIGHEST = DRM_MM_INSERT_HIGH | DRM_MM_INSERT_ONCE, + + /** + * @DRM_MM_INSERT_LOWEST: + * + * Only check the lowest hole (the hole with the smallest address) and + * insert the node at the bottom of the hole or report -ENOSPC if + * unsuitable. + * + * Does not search all holes. + */ + DRM_MM_INSERT_LOWEST = DRM_MM_INSERT_LOW | DRM_MM_INSERT_ONCE, }; /** @@ -173,7 +205,7 @@ struct drm_mm { struct drm_mm_node head_node; /* Keep an interval_tree for fast lookup of drm_mm_nodes by address. */ struct rb_root_cached interval_tree; - struct rb_root holes_size; + struct rb_root_cached holes_size; struct rb_root holes_addr; unsigned long scan_active; diff --git a/include/drm/drm_mode_config.h b/include/drm/drm_mode_config.h index 33b3a96d66d0..f4a173c8d79c 100644 --- a/include/drm/drm_mode_config.h +++ b/include/drm/drm_mode_config.h @@ -727,6 +727,11 @@ struct drm_mode_config { */ struct drm_property *aspect_ratio_property; /** + * @content_type_property: Optional connector property to control the + * HDMI infoframe content type setting. + */ + struct drm_property *content_type_property; + /** * @degamma_lut_property: Optional CRTC property to set the LUT used to * convert the framebuffer's colors to linear gamma. */ @@ -779,6 +784,29 @@ struct drm_mode_config { */ struct drm_property *panel_orientation_property; + /** + * @writeback_fb_id_property: Property for writeback connectors, storing + * the ID of the output framebuffer. + * See also: drm_writeback_connector_init() + */ + struct drm_property *writeback_fb_id_property; + + /** + * @writeback_pixel_formats_property: Property for writeback connectors, + * storing an array of the supported pixel formats for the writeback + * engine (read-only). + * See also: drm_writeback_connector_init() + */ + struct drm_property *writeback_pixel_formats_property; + /** + * @writeback_out_fence_ptr_property: Property for writeback connectors, + * fd pointer representing the outgoing fences for a writeback + * connector. Userspace should provide a pointer to a value of type s32, + * and then cast that pointer to u64. + * See also: drm_writeback_connector_init() + */ + struct drm_property *writeback_out_fence_ptr_property; + /* dumb ioctl parameters */ uint32_t preferred_depth, prefer_shadow; diff --git a/include/drm/drm_modeset_helper_vtables.h b/include/drm/drm_modeset_helper_vtables.h index 35e2a3a79fc5..3b289773297c 100644 --- a/include/drm/drm_modeset_helper_vtables.h +++ b/include/drm/drm_modeset_helper_vtables.h @@ -974,6 +974,17 @@ struct drm_connector_helper_funcs { */ int (*atomic_check)(struct drm_connector *connector, struct drm_connector_state *state); + + /** + * @atomic_commit: + * + * This hook is to be used by drivers implementing writeback connectors + * that need a point when to commit the writeback job to the hardware. + * + * This callback is used by the atomic modeset helpers. + */ + void (*atomic_commit)(struct drm_connector *connector, + struct drm_writeback_job *writeback_job); }; /** diff --git a/include/drm/drm_panel.h b/include/drm/drm_panel.h index 14ac240a1f64..26a1b5fd8796 100644 --- a/include/drm/drm_panel.h +++ b/include/drm/drm_panel.h @@ -89,6 +89,7 @@ struct drm_panel { struct drm_device *drm; struct drm_connector *connector; struct device *dev; + struct device_link *link; const struct drm_panel_funcs *funcs; diff --git a/include/drm/drm_plane.h b/include/drm/drm_plane.h index 26fa50c2a50e..7d4d6c7f0afd 100644 --- a/include/drm/drm_plane.h +++ b/include/drm/drm_plane.h @@ -288,6 +288,8 @@ struct drm_plane_funcs { * cleaned up by calling the @atomic_destroy_state hook in this * structure. * + * This callback is mandatory for atomic drivers. + * * Atomic drivers which don't subclass &struct drm_plane_state should use * drm_atomic_helper_plane_duplicate_state(). Drivers that subclass the * state structure to extend it with driver-private state should use @@ -314,6 +316,8 @@ struct drm_plane_funcs { * * Destroy a state duplicated with @atomic_duplicate_state and release * or unreference all resources it references + * + * This callback is mandatory for atomic drivers. */ void (*atomic_destroy_state)(struct drm_plane *plane, struct drm_plane_state *state); @@ -431,7 +435,10 @@ struct drm_plane_funcs { * This optional hook is used for the DRM to determine if the given * format/modifier combination is valid for the plane. This allows the * DRM to generate the correct format bitmask (which formats apply to - * which modifier). + * which modifier), and to valdiate modifiers at atomic_check time. + * + * If not present, then any modifier in the plane's modifier + * list is allowed with any of the plane's formats. * * Returns: * diff --git a/include/drm/drm_prime.h b/include/drm/drm_prime.h index 4d5f5d6cf6a6..d716d653b096 100644 --- a/include/drm/drm_prime.h +++ b/include/drm/drm_prime.h @@ -82,7 +82,7 @@ int drm_gem_prime_fd_to_handle(struct drm_device *dev, struct dma_buf *drm_gem_dmabuf_export(struct drm_device *dev, struct dma_buf_export_info *exp_info); void drm_gem_dmabuf_release(struct dma_buf *dma_buf); -int drm_gem_map_attach(struct dma_buf *dma_buf, struct device *target_dev, +int drm_gem_map_attach(struct dma_buf *dma_buf, struct dma_buf_attachment *attach); void drm_gem_map_detach(struct dma_buf *dma_buf, struct dma_buf_attachment *attach); @@ -93,10 +93,6 @@ void drm_gem_unmap_dma_buf(struct dma_buf_attachment *attach, enum dma_data_direction dir); void *drm_gem_dmabuf_vmap(struct dma_buf *dma_buf); void drm_gem_dmabuf_vunmap(struct dma_buf *dma_buf, void *vaddr); -void *drm_gem_dmabuf_kmap_atomic(struct dma_buf *dma_buf, - unsigned long page_num); -void drm_gem_dmabuf_kunmap_atomic(struct dma_buf *dma_buf, - unsigned long page_num, void *addr); void *drm_gem_dmabuf_kmap(struct dma_buf *dma_buf, unsigned long page_num); void drm_gem_dmabuf_kunmap(struct dma_buf *dma_buf, unsigned long page_num, void *addr); diff --git a/include/drm/drm_writeback.h b/include/drm/drm_writeback.h new file mode 100644 index 000000000000..a10fe556dfd4 --- /dev/null +++ b/include/drm/drm_writeback.h @@ -0,0 +1,130 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * (C) COPYRIGHT 2016 ARM Limited. All rights reserved. + * Author: Brian Starkey <brian.starkey@arm.com> + * + * This program is free software and is provided to you under the terms of the + * GNU General Public License version 2 as published by the Free Software + * Foundation, and any use by you of this program is subject to the terms + * of such GNU licence. + */ + +#ifndef __DRM_WRITEBACK_H__ +#define __DRM_WRITEBACK_H__ +#include <drm/drm_connector.h> +#include <drm/drm_encoder.h> +#include <linux/workqueue.h> + +struct drm_writeback_connector { + struct drm_connector base; + + /** + * @encoder: Internal encoder used by the connector to fulfill + * the DRM framework requirements. The users of the + * @drm_writeback_connector control the behaviour of the @encoder + * by passing the @enc_funcs parameter to drm_writeback_connector_init() + * function. + */ + struct drm_encoder encoder; + + /** + * @pixel_formats_blob_ptr: + * + * DRM blob property data for the pixel formats list on writeback + * connectors + * See also drm_writeback_connector_init() + */ + struct drm_property_blob *pixel_formats_blob_ptr; + + /** @job_lock: Protects job_queue */ + spinlock_t job_lock; + + /** + * @job_queue: + * + * Holds a list of a connector's writeback jobs; the last item is the + * most recent. The first item may be either waiting for the hardware + * to begin writing, or currently being written. + * + * See also: drm_writeback_queue_job() and + * drm_writeback_signal_completion() + */ + struct list_head job_queue; + + /** + * @fence_context: + * + * timeline context used for fence operations. + */ + unsigned int fence_context; + /** + * @fence_lock: + * + * spinlock to protect the fences in the fence_context. + */ + spinlock_t fence_lock; + /** + * @fence_seqno: + * + * Seqno variable used as monotonic counter for the fences + * created on the connector's timeline. + */ + unsigned long fence_seqno; + /** + * @timeline_name: + * + * The name of the connector's fence timeline. + */ + char timeline_name[32]; +}; + +struct drm_writeback_job { + /** + * @cleanup_work: + * + * Used to allow drm_writeback_signal_completion to defer dropping the + * framebuffer reference to a workqueue + */ + struct work_struct cleanup_work; + + /** + * @list_entry: + * + * List item for the writeback connector's @job_queue + */ + struct list_head list_entry; + + /** + * @fb: + * + * Framebuffer to be written to by the writeback connector. Do not set + * directly, use drm_atomic_set_writeback_fb_for_connector() + */ + struct drm_framebuffer *fb; + + /** + * @out_fence: + * + * Fence which will signal once the writeback has completed + */ + struct dma_fence *out_fence; +}; + +int drm_writeback_connector_init(struct drm_device *dev, + struct drm_writeback_connector *wb_connector, + const struct drm_connector_funcs *con_funcs, + const struct drm_encoder_helper_funcs *enc_helper_funcs, + const u32 *formats, int n_formats); + +void drm_writeback_queue_job(struct drm_writeback_connector *wb_connector, + struct drm_writeback_job *job); + +void drm_writeback_cleanup_job(struct drm_writeback_job *job); + +void +drm_writeback_signal_completion(struct drm_writeback_connector *wb_connector, + int status); + +struct dma_fence * +drm_writeback_get_out_fence(struct drm_writeback_connector *wb_connector); +#endif diff --git a/include/linux/dma-buf.h b/include/linux/dma-buf.h index 085db2fee2d7..58725f890b5b 100644 --- a/include/linux/dma-buf.h +++ b/include/linux/dma-buf.h @@ -39,12 +39,12 @@ struct dma_buf_attachment; /** * struct dma_buf_ops - operations possible on struct dma_buf - * @map_atomic: maps a page from the buffer into kernel address + * @map_atomic: [optional] maps a page from the buffer into kernel address * space, users may not block until the subsequent unmap call. * This callback must not sleep. * @unmap_atomic: [optional] unmaps a atomically mapped page from the buffer. * This Callback must not sleep. - * @map: maps a page from the buffer into kernel address space. + * @map: [optional] maps a page from the buffer into kernel address space. * @unmap: [optional] unmaps a page from the buffer. * @vmap: [optional] creates a virtual mapping for the buffer into kernel * address space. Same restrictions as for vmap and friends apply. @@ -55,11 +55,11 @@ struct dma_buf_ops { * @attach: * * This is called from dma_buf_attach() to make sure that a given - * &device can access the provided &dma_buf. Exporters which support - * buffer objects in special locations like VRAM or device-specific - * carveout areas should check whether the buffer could be move to - * system memory (or directly accessed by the provided device), and - * otherwise need to fail the attach operation. + * &dma_buf_attachment.dev can access the provided &dma_buf. Exporters + * which support buffer objects in special locations like VRAM or + * device-specific carveout areas should check whether the buffer could + * be move to system memory (or directly accessed by the provided + * device), and otherwise need to fail the attach operation. * * The exporter should also in general check whether the current * allocation fullfills the DMA constraints of the new device. If this @@ -77,8 +77,7 @@ struct dma_buf_ops { * to signal that backing storage is already allocated and incompatible * with the requirements of requesting device. */ - int (*attach)(struct dma_buf *, struct device *, - struct dma_buf_attachment *); + int (*attach)(struct dma_buf *, struct dma_buf_attachment *); /** * @detach: @@ -206,8 +205,6 @@ struct dma_buf_ops { * to be restarted. */ int (*end_cpu_access)(struct dma_buf *, enum dma_data_direction); - void *(*map_atomic)(struct dma_buf *, unsigned long); - void (*unmap_atomic)(struct dma_buf *, unsigned long, void *); void *(*map)(struct dma_buf *, unsigned long); void (*unmap)(struct dma_buf *, unsigned long, void *); @@ -395,8 +392,6 @@ int dma_buf_begin_cpu_access(struct dma_buf *dma_buf, enum dma_data_direction dir); int dma_buf_end_cpu_access(struct dma_buf *dma_buf, enum dma_data_direction dir); -void *dma_buf_kmap_atomic(struct dma_buf *, unsigned long); -void dma_buf_kunmap_atomic(struct dma_buf *, unsigned long, void *); void *dma_buf_kmap(struct dma_buf *, unsigned long); void dma_buf_kunmap(struct dma_buf *, unsigned long, void *); diff --git a/include/uapi/drm/drm.h b/include/uapi/drm/drm.h index 9c660e1688ab..300f336633f2 100644 --- a/include/uapi/drm/drm.h +++ b/include/uapi/drm/drm.h @@ -687,6 +687,15 @@ struct drm_get_cap { */ #define DRM_CLIENT_CAP_ASPECT_RATIO 4 +/** + * DRM_CLIENT_CAP_WRITEBACK_CONNECTORS + * + * If set to 1, the DRM core will expose special connectors to be used for + * writing back to memory the scene setup in the commit. Depends on client + * also supporting DRM_CLIENT_CAP_ATOMIC + */ +#define DRM_CLIENT_CAP_WRITEBACK_CONNECTORS 5 + /** DRM_IOCTL_SET_CLIENT_CAP ioctl argument type */ struct drm_set_client_cap { __u64 capability; diff --git a/include/uapi/drm/drm_fourcc.h b/include/uapi/drm/drm_fourcc.h index e04613d30a13..64bf67abff7e 100644 --- a/include/uapi/drm/drm_fourcc.h +++ b/include/uapi/drm/drm_fourcc.h @@ -385,6 +385,23 @@ extern "C" { fourcc_mod_code(NVIDIA, 0x15) /* + * Some Broadcom modifiers take parameters, for example the number of + * vertical lines in the image. Reserve the lower 32 bits for modifier + * type, and the next 24 bits for parameters. Top 8 bits are the + * vendor code. + */ +#define __fourcc_mod_broadcom_param_shift 8 +#define __fourcc_mod_broadcom_param_bits 48 +#define fourcc_mod_broadcom_code(val, params) \ + fourcc_mod_code(BROADCOM, ((((__u64)params) << __fourcc_mod_broadcom_param_shift) | val)) +#define fourcc_mod_broadcom_param(m) \ + ((int)(((m) >> __fourcc_mod_broadcom_param_shift) & \ + ((1ULL << __fourcc_mod_broadcom_param_bits) - 1))) +#define fourcc_mod_broadcom_mod(m) \ + ((m) & ~(((1ULL << __fourcc_mod_broadcom_param_bits) - 1) << \ + __fourcc_mod_broadcom_param_shift)) + +/* * Broadcom VC4 "T" format * * This is the primary layout that the V3D GPU can texture from (it @@ -405,6 +422,48 @@ extern "C" { */ #define DRM_FORMAT_MOD_BROADCOM_VC4_T_TILED fourcc_mod_code(BROADCOM, 1) +/* + * Broadcom SAND format + * + * This is the native format that the H.264 codec block uses. For VC4 + * HVS, it is only valid for H.264 (NV12/21) and RGBA modes. + * + * The image can be considered to be split into columns, and the + * columns are placed consecutively into memory. The width of those + * columns can be either 32, 64, 128, or 256 pixels, but in practice + * only 128 pixel columns are used. + * + * The pitch between the start of each column is set to optimally + * switch between SDRAM banks. This is passed as the number of lines + * of column width in the modifier (we can't use the stride value due + * to various core checks that look at it , so you should set the + * stride to width*cpp). + * + * Note that the column height for this format modifier is the same + * for all of the planes, assuming that each column contains both Y + * and UV. Some SAND-using hardware stores UV in a separate tiled + * image from Y to reduce the column height, which is not supported + * with these modifiers. + */ + +#define DRM_FORMAT_MOD_BROADCOM_SAND32_COL_HEIGHT(v) \ + fourcc_mod_broadcom_code(2, v) +#define DRM_FORMAT_MOD_BROADCOM_SAND64_COL_HEIGHT(v) \ + fourcc_mod_broadcom_code(3, v) +#define DRM_FORMAT_MOD_BROADCOM_SAND128_COL_HEIGHT(v) \ + fourcc_mod_broadcom_code(4, v) +#define DRM_FORMAT_MOD_BROADCOM_SAND256_COL_HEIGHT(v) \ + fourcc_mod_broadcom_code(5, v) + +#define DRM_FORMAT_MOD_BROADCOM_SAND32 \ + DRM_FORMAT_MOD_BROADCOM_SAND32_COL_HEIGHT(0) +#define DRM_FORMAT_MOD_BROADCOM_SAND64 \ + DRM_FORMAT_MOD_BROADCOM_SAND64_COL_HEIGHT(0) +#define DRM_FORMAT_MOD_BROADCOM_SAND128 \ + DRM_FORMAT_MOD_BROADCOM_SAND128_COL_HEIGHT(0) +#define DRM_FORMAT_MOD_BROADCOM_SAND256 \ + DRM_FORMAT_MOD_BROADCOM_SAND256_COL_HEIGHT(0) + #if defined(__cplusplus) } #endif diff --git a/include/uapi/drm/drm_mode.h b/include/uapi/drm/drm_mode.h index 4b3a1bb58e68..8d67243952f4 100644 --- a/include/uapi/drm/drm_mode.h +++ b/include/uapi/drm/drm_mode.h @@ -96,6 +96,13 @@ extern "C" { #define DRM_MODE_PICTURE_ASPECT_64_27 3 #define DRM_MODE_PICTURE_ASPECT_256_135 4 +/* Content type options */ +#define DRM_MODE_CONTENT_TYPE_NO_DATA 0 +#define DRM_MODE_CONTENT_TYPE_GRAPHICS 1 +#define DRM_MODE_CONTENT_TYPE_PHOTO 2 +#define DRM_MODE_CONTENT_TYPE_CINEMA 3 +#define DRM_MODE_CONTENT_TYPE_GAME 4 + /* Aspect ratio flag bitmask (4 bits 22:19) */ #define DRM_MODE_FLAG_PIC_AR_MASK (0x0F<<19) #define DRM_MODE_FLAG_PIC_AR_NONE \ @@ -344,6 +351,7 @@ enum drm_mode_subconnector { #define DRM_MODE_CONNECTOR_VIRTUAL 15 #define DRM_MODE_CONNECTOR_DSI 16 #define DRM_MODE_CONNECTOR_DPI 17 +#define DRM_MODE_CONNECTOR_WRITEBACK 18 struct drm_mode_get_connector { |