diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/linux/platform_data/dma-ep93xx.h | 93 | ||||
| -rw-r--r-- | include/linux/platform_data/keypad-ep93xx.h | 35 | ||||
| -rw-r--r-- | include/linux/platform_data/spi-ep93xx.h | 29 | ||||
| -rw-r--r-- | include/linux/platform_data/video-ep93xx.h | 56 |
4 files changed, 213 insertions, 0 deletions
diff --git a/include/linux/platform_data/dma-ep93xx.h b/include/linux/platform_data/dma-ep93xx.h new file mode 100644 index 000000000000..e82c642fa53c --- /dev/null +++ b/include/linux/platform_data/dma-ep93xx.h @@ -0,0 +1,93 @@ +#ifndef __ASM_ARCH_DMA_H +#define __ASM_ARCH_DMA_H + +#include <linux/types.h> +#include <linux/dmaengine.h> +#include <linux/dma-mapping.h> + +/* + * M2P channels. + * + * Note that these values are also directly used for setting the PPALLOC + * register. + */ +#define EP93XX_DMA_I2S1 0 +#define EP93XX_DMA_I2S2 1 +#define EP93XX_DMA_AAC1 2 +#define EP93XX_DMA_AAC2 3 +#define EP93XX_DMA_AAC3 4 +#define EP93XX_DMA_I2S3 5 +#define EP93XX_DMA_UART1 6 +#define EP93XX_DMA_UART2 7 +#define EP93XX_DMA_UART3 8 +#define EP93XX_DMA_IRDA 9 +/* M2M channels */ +#define EP93XX_DMA_SSP 10 +#define EP93XX_DMA_IDE 11 + +/** + * struct ep93xx_dma_data - configuration data for the EP93xx dmaengine + * @port: peripheral which is requesting the channel + * @direction: TX/RX channel + * @name: optional name for the channel, this is displayed in /proc/interrupts + * + * This information is passed as private channel parameter in a filter + * function. Note that this is only needed for slave/cyclic channels. For + * memcpy channels %NULL data should be passed. + */ +struct ep93xx_dma_data { + int port; + enum dma_transfer_direction direction; + const char *name; +}; + +/** + * struct ep93xx_dma_chan_data - platform specific data for a DMA channel + * @name: name of the channel, used for getting the right clock for the channel + * @base: mapped registers + * @irq: interrupt number used by this channel + */ +struct ep93xx_dma_chan_data { + const char *name; + void __iomem *base; + int irq; +}; + +/** + * struct ep93xx_dma_platform_data - platform data for the dmaengine driver + * @channels: array of channels which are passed to the driver + * @num_channels: number of channels in the array + * + * This structure is passed to the DMA engine driver via platform data. For + * M2P channels, contract is that even channels are for TX and odd for RX. + * There is no requirement for the M2M channels. + */ +struct ep93xx_dma_platform_data { + struct ep93xx_dma_chan_data *channels; + size_t num_channels; +}; + +static inline bool ep93xx_dma_chan_is_m2p(struct dma_chan *chan) +{ + return !strcmp(dev_name(chan->device->dev), "ep93xx-dma-m2p"); +} + +/** + * ep93xx_dma_chan_direction - returns direction the channel can be used + * @chan: channel + * + * This function can be used in filter functions to find out whether the + * channel supports given DMA direction. Only M2P channels have such + * limitation, for M2M channels the direction is configurable. + */ +static inline enum dma_transfer_direction +ep93xx_dma_chan_direction(struct dma_chan *chan) +{ + if (!ep93xx_dma_chan_is_m2p(chan)) + return DMA_NONE; + + /* even channels are for TX, odd for RX */ + return (chan->chan_id % 2 == 0) ? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM; +} + +#endif /* __ASM_ARCH_DMA_H */ diff --git a/include/linux/platform_data/keypad-ep93xx.h b/include/linux/platform_data/keypad-ep93xx.h new file mode 100644 index 000000000000..1e2f4e97f428 --- /dev/null +++ b/include/linux/platform_data/keypad-ep93xx.h @@ -0,0 +1,35 @@ +/* + * arch/arm/mach-ep93xx/include/mach/ep93xx_keypad.h + */ + +#ifndef __ASM_ARCH_EP93XX_KEYPAD_H +#define __ASM_ARCH_EP93XX_KEYPAD_H + +struct matrix_keymap_data; + +/* flags for the ep93xx_keypad driver */ +#define EP93XX_KEYPAD_DISABLE_3_KEY (1<<0) /* disable 3-key reset */ +#define EP93XX_KEYPAD_DIAG_MODE (1<<1) /* diagnostic mode */ +#define EP93XX_KEYPAD_BACK_DRIVE (1<<2) /* back driving mode */ +#define EP93XX_KEYPAD_TEST_MODE (1<<3) /* scan only column 0 */ +#define EP93XX_KEYPAD_KDIV (1<<4) /* 1/4 clock or 1/16 clock */ +#define EP93XX_KEYPAD_AUTOREPEAT (1<<5) /* enable key autorepeat */ + +/** + * struct ep93xx_keypad_platform_data - platform specific device structure + * @keymap_data: pointer to &matrix_keymap_data + * @debounce: debounce start count; terminal count is 0xff + * @prescale: row/column counter pre-scaler load value + * @flags: see above + */ +struct ep93xx_keypad_platform_data { + struct matrix_keymap_data *keymap_data; + unsigned int debounce; + unsigned int prescale; + unsigned int flags; +}; + +#define EP93XX_MATRIX_ROWS (8) +#define EP93XX_MATRIX_COLS (8) + +#endif /* __ASM_ARCH_EP93XX_KEYPAD_H */ diff --git a/include/linux/platform_data/spi-ep93xx.h b/include/linux/platform_data/spi-ep93xx.h new file mode 100644 index 000000000000..9bb63ac13f04 --- /dev/null +++ b/include/linux/platform_data/spi-ep93xx.h @@ -0,0 +1,29 @@ +#ifndef __ASM_MACH_EP93XX_SPI_H +#define __ASM_MACH_EP93XX_SPI_H + +struct spi_device; + +/** + * struct ep93xx_spi_info - EP93xx specific SPI descriptor + * @num_chipselect: number of chip selects on this board, must be + * at least one + * @use_dma: use DMA for the transfers + */ +struct ep93xx_spi_info { + int num_chipselect; + bool use_dma; +}; + +/** + * struct ep93xx_spi_chip_ops - operation callbacks for SPI slave device + * @setup: setup the chip select mechanism + * @cleanup: cleanup the chip select mechanism + * @cs_control: control the device chip select + */ +struct ep93xx_spi_chip_ops { + int (*setup)(struct spi_device *spi); + void (*cleanup)(struct spi_device *spi); + void (*cs_control)(struct spi_device *spi, int value); +}; + +#endif /* __ASM_MACH_EP93XX_SPI_H */ diff --git a/include/linux/platform_data/video-ep93xx.h b/include/linux/platform_data/video-ep93xx.h new file mode 100644 index 000000000000..d5ae11d7c453 --- /dev/null +++ b/include/linux/platform_data/video-ep93xx.h @@ -0,0 +1,56 @@ +/* + * arch/arm/mach-ep93xx/include/mach/fb.h + */ + +#ifndef __ASM_ARCH_EP93XXFB_H +#define __ASM_ARCH_EP93XXFB_H + +struct platform_device; +struct fb_videomode; +struct fb_info; + +#define EP93XXFB_USE_MODEDB 0 + +/* VideoAttributes flags */ +#define EP93XXFB_STATE_MACHINE_ENABLE (1 << 0) +#define EP93XXFB_PIXEL_CLOCK_ENABLE (1 << 1) +#define EP93XXFB_VSYNC_ENABLE (1 << 2) +#define EP93XXFB_PIXEL_DATA_ENABLE (1 << 3) +#define EP93XXFB_COMPOSITE_SYNC (1 << 4) +#define EP93XXFB_SYNC_VERT_HIGH (1 << 5) +#define EP93XXFB_SYNC_HORIZ_HIGH (1 << 6) +#define EP93XXFB_SYNC_BLANK_HIGH (1 << 7) +#define EP93XXFB_PCLK_FALLING (1 << 8) +#define EP93XXFB_ENABLE_AC (1 << 9) +#define EP93XXFB_ENABLE_LCD (1 << 10) +#define EP93XXFB_ENABLE_CCIR (1 << 12) +#define EP93XXFB_USE_PARALLEL_INTERFACE (1 << 13) +#define EP93XXFB_ENABLE_INTERRUPT (1 << 14) +#define EP93XXFB_USB_INTERLACE (1 << 16) +#define EP93XXFB_USE_EQUALIZATION (1 << 17) +#define EP93XXFB_USE_DOUBLE_HORZ (1 << 18) +#define EP93XXFB_USE_DOUBLE_VERT (1 << 19) +#define EP93XXFB_USE_BLANK_PIXEL (1 << 20) +#define EP93XXFB_USE_SDCSN0 (0 << 21) +#define EP93XXFB_USE_SDCSN1 (1 << 21) +#define EP93XXFB_USE_SDCSN2 (2 << 21) +#define EP93XXFB_USE_SDCSN3 (3 << 21) + +#define EP93XXFB_ENABLE (EP93XXFB_STATE_MACHINE_ENABLE | \ + EP93XXFB_PIXEL_CLOCK_ENABLE | \ + EP93XXFB_VSYNC_ENABLE | \ + EP93XXFB_PIXEL_DATA_ENABLE) + +struct ep93xxfb_mach_info { + unsigned int num_modes; + const struct fb_videomode *modes; + const struct fb_videomode *default_mode; + int bpp; + unsigned int flags; + + int (*setup)(struct platform_device *pdev); + void (*teardown)(struct platform_device *pdev); + void (*blank)(int blank_mode, struct fb_info *info); +}; + +#endif /* __ASM_ARCH_EP93XXFB_H */ |