diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/net/cfg80211.h | 65 | ||||
| -rw-r--r-- | include/net/iw_handler.h | 22 | ||||
| -rw-r--r-- | include/net/mac80211.h | 150 | ||||
| -rw-r--r-- | include/uapi/linux/nl80211.h | 34 |
4 files changed, 244 insertions, 27 deletions
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index f977abec07f6..441306436569 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -215,6 +215,39 @@ enum ieee80211_rate_flags { }; /** + * enum ieee80211_bss_type - BSS type filter + * + * @IEEE80211_BSS_TYPE_ESS: Infrastructure BSS + * @IEEE80211_BSS_TYPE_PBSS: Personal BSS + * @IEEE80211_BSS_TYPE_IBSS: Independent BSS + * @IEEE80211_BSS_TYPE_MBSS: Mesh BSS + * @IEEE80211_BSS_TYPE_ANY: Wildcard value for matching any BSS type + */ +enum ieee80211_bss_type { + IEEE80211_BSS_TYPE_ESS, + IEEE80211_BSS_TYPE_PBSS, + IEEE80211_BSS_TYPE_IBSS, + IEEE80211_BSS_TYPE_MBSS, + IEEE80211_BSS_TYPE_ANY +}; + +/** + * enum ieee80211_privacy - BSS privacy filter + * + * @IEEE80211_PRIVACY_ON: privacy bit set + * @IEEE80211_PRIVACY_OFF: privacy bit clear + * @IEEE80211_PRIVACY_ANY: Wildcard value for matching any privacy setting + */ +enum ieee80211_privacy { + IEEE80211_PRIVACY_ON, + IEEE80211_PRIVACY_OFF, + IEEE80211_PRIVACY_ANY +}; + +#define IEEE80211_PRIVACY(x) \ + ((x) ? IEEE80211_PRIVACY_ON : IEEE80211_PRIVACY_OFF) + +/** * struct ieee80211_rate - bitrate definition * * This structure describes a bitrate that an 802.11 PHY can @@ -2423,6 +2456,7 @@ struct cfg80211_ops { struct wireless_dev * (*add_virtual_intf)(struct wiphy *wiphy, const char *name, + unsigned char name_assign_type, enum nl80211_iftype type, u32 *flags, struct vif_params *params); @@ -4010,14 +4044,16 @@ struct cfg80211_bss *cfg80211_get_bss(struct wiphy *wiphy, struct ieee80211_channel *channel, const u8 *bssid, const u8 *ssid, size_t ssid_len, - u16 capa_mask, u16 capa_val); + enum ieee80211_bss_type bss_type, + enum ieee80211_privacy); static inline struct cfg80211_bss * cfg80211_get_ibss(struct wiphy *wiphy, struct ieee80211_channel *channel, const u8 *ssid, size_t ssid_len) { return cfg80211_get_bss(wiphy, channel, NULL, ssid, ssid_len, - WLAN_CAPABILITY_IBSS, WLAN_CAPABILITY_IBSS); + IEEE80211_BSS_TYPE_IBSS, + IEEE80211_PRIVACY_ANY); } /** @@ -4258,6 +4294,7 @@ struct sk_buff *__cfg80211_alloc_reply_skb(struct wiphy *wiphy, int approxlen); struct sk_buff *__cfg80211_alloc_event_skb(struct wiphy *wiphy, + struct wireless_dev *wdev, enum nl80211_commands cmd, enum nl80211_attrs attr, int vendor_event_idx, @@ -4312,6 +4349,7 @@ int cfg80211_vendor_cmd_reply(struct sk_buff *skb); /** * cfg80211_vendor_event_alloc - allocate vendor-specific event skb * @wiphy: the wiphy + * @wdev: the wireless device * @event_idx: index of the vendor event in the wiphy's vendor_events * @approxlen: an upper bound of the length of the data that will * be put into the skb @@ -4320,16 +4358,20 @@ int cfg80211_vendor_cmd_reply(struct sk_buff *skb); * This function allocates and pre-fills an skb for an event on the * vendor-specific multicast group. * + * If wdev != NULL, both the ifindex and identifier of the specified + * wireless device are added to the event message before the vendor data + * attribute. + * * When done filling the skb, call cfg80211_vendor_event() with the * skb to send the event. * * Return: An allocated and pre-filled skb. %NULL if any errors happen. */ static inline struct sk_buff * -cfg80211_vendor_event_alloc(struct wiphy *wiphy, int approxlen, - int event_idx, gfp_t gfp) +cfg80211_vendor_event_alloc(struct wiphy *wiphy, struct wireless_dev *wdev, + int approxlen, int event_idx, gfp_t gfp) { - return __cfg80211_alloc_event_skb(wiphy, NL80211_CMD_VENDOR, + return __cfg80211_alloc_event_skb(wiphy, wdev, NL80211_CMD_VENDOR, NL80211_ATTR_VENDOR_DATA, event_idx, approxlen, gfp); } @@ -4430,7 +4472,7 @@ static inline int cfg80211_testmode_reply(struct sk_buff *skb) static inline struct sk_buff * cfg80211_testmode_alloc_event_skb(struct wiphy *wiphy, int approxlen, gfp_t gfp) { - return __cfg80211_alloc_event_skb(wiphy, NL80211_CMD_TESTMODE, + return __cfg80211_alloc_event_skb(wiphy, NULL, NL80211_CMD_TESTMODE, NL80211_ATTR_TESTDATA, -1, approxlen, gfp); } @@ -4860,6 +4902,17 @@ void cfg80211_ch_switch_started_notify(struct net_device *dev, bool ieee80211_operating_class_to_band(u8 operating_class, enum ieee80211_band *band); +/** + * ieee80211_chandef_to_operating_class - convert chandef to operation class + * + * @chandef: the chandef to convert + * @op_class: a pointer to the resulting operating class + * + * Returns %true if the conversion was successful, %false otherwise. + */ +bool ieee80211_chandef_to_operating_class(struct cfg80211_chan_def *chandef, + u8 *op_class); + /* * cfg80211_tdls_oper_request - request userspace to perform TDLS operation * @dev: the device on which the operation is requested diff --git a/include/net/iw_handler.h b/include/net/iw_handler.h index a830b01baba4..8f81bbbc38fc 100644 --- a/include/net/iw_handler.h +++ b/include/net/iw_handler.h @@ -519,6 +519,17 @@ iwe_stream_add_event(struct iw_request_info *info, char *stream, char *ends, return stream; } +static inline char * +iwe_stream_add_event_check(struct iw_request_info *info, char *stream, + char *ends, struct iw_event *iwe, int event_len) +{ + char *res = iwe_stream_add_event(info, stream, ends, iwe, event_len); + + if (res == stream) + return ERR_PTR(-E2BIG); + return res; +} + /*------------------------------------------------------------------*/ /* * Wrapper to add an short Wireless Event containing a pointer to a @@ -545,6 +556,17 @@ iwe_stream_add_point(struct iw_request_info *info, char *stream, char *ends, return stream; } +static inline char * +iwe_stream_add_point_check(struct iw_request_info *info, char *stream, + char *ends, struct iw_event *iwe, char *extra) +{ + char *res = iwe_stream_add_point(info, stream, ends, iwe, extra); + + if (res == stream) + return ERR_PTR(-E2BIG); + return res; +} + /*------------------------------------------------------------------*/ /* * Wrapper to add a value to a Wireless Event in a stream of events. diff --git a/include/net/mac80211.h b/include/net/mac80211.h index d52914b75331..201bc68e0cff 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -301,17 +301,86 @@ enum ieee80211_bss_change { #define IEEE80211_BSS_ARP_ADDR_LIST_LEN 4 /** - * enum ieee80211_rssi_event - RSSI threshold event - * An indicator for when RSSI goes below/above a certain threshold. - * @RSSI_EVENT_HIGH: AP's rssi crossed the high threshold set by the driver. - * @RSSI_EVENT_LOW: AP's rssi crossed the low threshold set by the driver. + * enum ieee80211_event_type - event to be notified to the low level driver + * @RSSI_EVENT: AP's rssi crossed the a threshold set by the driver. + * @MLME_EVENT: event related to MLME */ -enum ieee80211_rssi_event { +enum ieee80211_event_type { + RSSI_EVENT, + MLME_EVENT, +}; + +/** + * enum ieee80211_rssi_event_data - relevant when event type is %RSSI_EVENT + * @RSSI_EVENT_HIGH: AP's rssi went below the threshold set by the driver. + * @RSSI_EVENT_LOW: AP's rssi went above the threshold set by the driver. + */ +enum ieee80211_rssi_event_data { RSSI_EVENT_HIGH, RSSI_EVENT_LOW, }; /** + * enum ieee80211_rssi_event - data attached to an %RSSI_EVENT + * @data: See &enum ieee80211_rssi_event_data + */ +struct ieee80211_rssi_event { + enum ieee80211_rssi_event_data data; +}; + +/** + * enum ieee80211_mlme_event_data - relevant when event type is %MLME_EVENT + * @AUTH_EVENT: the MLME operation is authentication + * @ASSOC_EVENT: the MLME operation is association + * @DEAUTH_RX_EVENT: deauth received.. + * @DEAUTH_TX_EVENT: deauth sent. + */ +enum ieee80211_mlme_event_data { + AUTH_EVENT, + ASSOC_EVENT, + DEAUTH_RX_EVENT, + DEAUTH_TX_EVENT, +}; + +/** + * enum ieee80211_mlme_event_status - relevant when event type is %MLME_EVENT + * @MLME_SUCCESS: the MLME operation completed successfully. + * @MLME_DENIED: the MLME operation was denied by the peer. + * @MLME_TIMEOUT: the MLME operation timed out. + */ +enum ieee80211_mlme_event_status { + MLME_SUCCESS, + MLME_DENIED, + MLME_TIMEOUT, +}; + +/** + * enum ieee80211_mlme_event - data attached to an %MLME_EVENT + * @data: See &enum ieee80211_mlme_event_data + * @status: See &enum ieee80211_mlme_event_status + * @reason: the reason code if applicable + */ +struct ieee80211_mlme_event { + enum ieee80211_mlme_event_data data; + enum ieee80211_mlme_event_status status; + u16 reason; +}; + +/** + * struct ieee80211_event - event to be sent to the driver + * @type The event itself. See &enum ieee80211_event_type. + * @rssi: relevant if &type is %RSSI_EVENT + * @mlme: relevant if &type is %AUTH_EVENT + */ +struct ieee80211_event { + enum ieee80211_event_type type; + union { + struct ieee80211_rssi_event rssi; + struct ieee80211_mlme_event mlme; + } u; +}; + +/** * struct ieee80211_bss_conf - holds the BSS's changing parameters * * This structure keeps information about a BSS (and an association @@ -337,12 +406,15 @@ enum ieee80211_rssi_event { * HW flag %IEEE80211_HW_TIMING_BEACON_ONLY is set, then this can * only come from a beacon, but might not become valid until after * association when a beacon is received (which is notified with the - * %BSS_CHANGED_DTIM flag.) + * %BSS_CHANGED_DTIM flag.). See also sync_dtim_count important notice. * @sync_device_ts: the device timestamp corresponding to the sync_tsf, * the driver/device can use this to calculate synchronisation - * (see @sync_tsf) + * (see @sync_tsf). See also sync_dtim_count important notice. * @sync_dtim_count: Only valid when %IEEE80211_HW_TIMING_BEACON_ONLY * is requested, see @sync_tsf/@sync_device_ts. + * IMPORTANT: These three sync_* parameters would possibly be out of sync + * by the time the driver will use them. The synchronized view is currently + * guaranteed only in certain callbacks. * @beacon_int: beacon interval * @assoc_capability: capabilities taken from assoc resp * @basic_rates: bitmap of basic rates, each bit stands for an @@ -1279,6 +1351,19 @@ static inline bool ieee80211_vif_is_mesh(struct ieee80211_vif *vif) struct ieee80211_vif *wdev_to_ieee80211_vif(struct wireless_dev *wdev); /** + * ieee80211_vif_to_wdev - return a wdev struct from a vif + * @vif: the vif to get the wdev for + * + * This can be used by mac80211 drivers with direct cfg80211 APIs + * (like the vendor commands) that needs to get the wdev for a vif. + * + * Note that this function may return %NULL if the given wdev isn't + * associated with a vif that the driver knows about (e.g. monitor + * or AP_VLAN interfaces.) + */ +struct wireless_dev *ieee80211_vif_to_wdev(struct ieee80211_vif *vif); + +/** * enum ieee80211_key_flags - key flags * * These flags are used for communication about keys between the driver @@ -1472,7 +1557,8 @@ struct ieee80211_sta_rates { * @supp_rates: Bitmap of supported rates (per band) * @ht_cap: HT capabilities of this STA; restricted to our own capabilities * @vht_cap: VHT capabilities of this STA; restricted to our own capabilities - * @wme: indicates whether the STA supports QoS/WME. + * @wme: indicates whether the STA supports QoS/WME (if local devices does, + * otherwise always false) * @drv_priv: data area for driver use, will always be aligned to * sizeof(void *), size is determined in hw information. * @uapsd_queues: bitmap of queues configured for uapsd. Only valid @@ -1488,6 +1574,7 @@ struct ieee80211_sta_rates { * @tdls: indicates whether the STA is a TDLS peer * @tdls_initiator: indicates the STA is an initiator of the TDLS link. Only * valid if the STA is a TDLS peer in the first place. + * @mfp: indicates whether the STA uses management frame protection or not. */ struct ieee80211_sta { u32 supp_rates[IEEE80211_NUM_BANDS]; @@ -1504,6 +1591,7 @@ struct ieee80211_sta { struct ieee80211_sta_rates __rcu *rates; bool tdls; bool tdls_initiator; + bool mfp; /* must be last */ u8 drv_priv[0] __aligned(sizeof(void *)); @@ -2844,8 +2932,9 @@ enum ieee80211_reconfig_type { * @set_bitrate_mask: Set a mask of rates to be used for rate control selection * when transmitting a frame. Currently only legacy rates are handled. * The callback can sleep. - * @rssi_callback: Notify driver when the average RSSI goes above/below - * thresholds that were registered previously. The callback can sleep. + * @event_callback: Notify driver about any event in mac80211. See + * &enum ieee80211_event_type for the different types. + * The callback can sleep. * * @release_buffered_frames: Release buffered frames according to the given * parameters. In the case where the driver buffers some frames for @@ -3141,9 +3230,9 @@ struct ieee80211_ops { bool (*tx_frames_pending)(struct ieee80211_hw *hw); int (*set_bitrate_mask)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, const struct cfg80211_bitrate_mask *mask); - void (*rssi_callback)(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - enum ieee80211_rssi_event rssi_event); + void (*event_callback)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + const struct ieee80211_event *event); void (*allow_buffered_frames)(struct ieee80211_hw *hw, struct ieee80211_sta *sta, @@ -4343,13 +4432,33 @@ void ieee80211_sched_scan_stopped(struct ieee80211_hw *hw); * haven't been re-added to the driver yet. * @IEEE80211_IFACE_ITER_RESUME_ALL: During resume, iterate over all * interfaces, even if they haven't been re-added to the driver yet. + * @IEEE80211_IFACE_ITER_ACTIVE: Iterate only active interfaces (netdev is up). */ enum ieee80211_interface_iteration_flags { IEEE80211_IFACE_ITER_NORMAL = 0, IEEE80211_IFACE_ITER_RESUME_ALL = BIT(0), + IEEE80211_IFACE_ITER_ACTIVE = BIT(1), }; /** + * ieee80211_iterate_interfaces - iterate interfaces + * + * This function iterates over the interfaces associated with a given + * hardware and calls the callback for them. This includes active as well as + * inactive interfaces. This function allows the iterator function to sleep. + * Will iterate over a new interface during add_interface(). + * + * @hw: the hardware struct of which the interfaces should be iterated over + * @iter_flags: iteration flags, see &enum ieee80211_interface_iteration_flags + * @iterator: the iterator function to call + * @data: first argument of the iterator function + */ +void ieee80211_iterate_interfaces(struct ieee80211_hw *hw, u32 iter_flags, + void (*iterator)(void *data, u8 *mac, + struct ieee80211_vif *vif), + void *data); + +/** * ieee80211_iterate_active_interfaces - iterate active interfaces * * This function iterates over the interfaces associated with a given @@ -4364,11 +4473,16 @@ enum ieee80211_interface_iteration_flags { * @iterator: the iterator function to call * @data: first argument of the iterator function */ -void ieee80211_iterate_active_interfaces(struct ieee80211_hw *hw, - u32 iter_flags, - void (*iterator)(void *data, u8 *mac, - struct ieee80211_vif *vif), - void *data); +static inline void +ieee80211_iterate_active_interfaces(struct ieee80211_hw *hw, u32 iter_flags, + void (*iterator)(void *data, u8 *mac, + struct ieee80211_vif *vif), + void *data) +{ + ieee80211_iterate_interfaces(hw, + iter_flags | IEEE80211_IFACE_ITER_ACTIVE, + iterator, data); +} /** * ieee80211_iterate_active_interfaces_atomic - iterate active interfaces diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 68b294e83944..241220c43e86 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -25,6 +25,19 @@ * */ +/* + * This header file defines the userspace API to the wireless stack. Please + * be careful not to break things - i.e. don't move anything around or so + * unless you can demonstrate that it breaks neither API nor ABI. + * + * Additions to the API should be accompanied by actual implementations in + * an upstream driver, so that example implementations exist in case there + * are ever concerns about the precise semantics of the API or changes are + * needed, and to ensure that code for dead (no longer implemented) API + * can actually be identified and removed. + * Nonetheless, semantics should also be documented carefully in this file. + */ + #include <linux/types.h> #define NL80211_GENL_NAME "nl80211" @@ -1684,6 +1697,10 @@ enum nl80211_commands { * If set during scheduled scan start then the new scan req will be * owned by the netlink socket that created it and the scheduled scan will * be stopped when the socket is closed. + * If set during configuration of regulatory indoor operation then the + * regulatory indoor configuration would be owned by the netlink socket + * that configured the indoor setting, and the indoor operation would be + * cleared when the socket is closed. * * @NL80211_ATTR_TDLS_INITIATOR: flag attribute indicating the current end is * the TDLS link initiator. @@ -1737,8 +1754,12 @@ enum nl80211_commands { * should be contained in the result as the sum of the respective counters * over all channels. * - * @NL80211_ATTR_SCHED_SCAN_DELAY: delay before a scheduled scan (or a - * WoWLAN net-detect scan) is started, u32 in seconds. + * @NL80211_ATTR_SCHED_SCAN_DELAY: delay before the first cycle of a + * scheduled scan (or a WoWLAN net-detect scan) is started, u32 + * in seconds. + + * @NL80211_ATTR_REG_INDOOR: flag attribute, if set indicates that the device + * is operating in an indoor environment. * * @NUM_NL80211_ATTR: total number of nl80211_attrs available * @NL80211_ATTR_MAX: highest attribute number currently defined @@ -2107,6 +2128,8 @@ enum nl80211_attrs { NL80211_ATTR_SCHED_SCAN_DELAY, + NL80211_ATTR_REG_INDOOR, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -3092,7 +3115,8 @@ enum nl80211_mesh_power_mode { * * @NL80211_MESHCONF_PLINK_TIMEOUT: If no tx activity is seen from a STA we've * established peering with for longer than this time (in seconds), then - * remove it from the STA's list of peers. Default is 30 minutes. + * remove it from the STA's list of peers. You may set this to 0 to disable + * the removal of the STA. Default is 30 minutes. * * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use */ @@ -3694,6 +3718,8 @@ struct nl80211_pattern_support { * @NL80211_WOWLAN_TRIG_ANY: wake up on any activity, do not really put * the chip into a special state -- works best with chips that have * support for low-power operation already (flag) + * Note that this mode is incompatible with all of the others, if + * any others are even supported by the device. * @NL80211_WOWLAN_TRIG_DISCONNECT: wake up on disconnect, the way disconnect * is detected is implementation-specific (flag) * @NL80211_WOWLAN_TRIG_MAGIC_PKT: wake up on magic packet (6x 0xff, followed @@ -4327,11 +4353,13 @@ enum nl80211_feature_flags { /** * enum nl80211_ext_feature_index - bit index of extended features. + * @NL80211_EXT_FEATURE_VHT_IBSS: This driver supports IBSS with VHT datarates. * * @NUM_NL80211_EXT_FEATURES: number of extended features. * @MAX_NL80211_EXT_FEATURES: highest extended feature index. */ enum nl80211_ext_feature_index { + NL80211_EXT_FEATURE_VHT_IBSS, /* add new features before the definition below */ NUM_NL80211_EXT_FEATURES, |