summaryrefslogtreecommitdiff
path: root/include
diff options
context:
space:
mode:
Diffstat (limited to 'include')
-rw-r--r--include/linux/nl80211.h35
-rw-r--r--include/net/cfg80211.h94
-rw-r--r--include/net/mac80211.h22
-rw-r--r--include/net/nfc/nci.h84
-rw-r--r--include/net/regulatory.h6
5 files changed, 131 insertions, 110 deletions
diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index f9261c253735..97bfebfcce90 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -1169,6 +1169,21 @@ enum nl80211_commands {
* @NL80211_ATTR_PROBE_RESP: Probe Response template data. Contains the entire
* probe-response frame. The DA field in the 802.11 header is zero-ed out,
* to be filled by the FW.
+ * @NL80211_ATTR_DISABLE_HT: Force HT capable interfaces to disable
+ * this feature. Currently, only supported in mac80211 drivers.
+ * @NL80211_ATTR_HT_CAPABILITY_MASK: Specify which bits of the
+ * ATTR_HT_CAPABILITY to which attention should be paid.
+ * Currently, only mac80211 NICs support this feature.
+ * The values that may be configured are:
+ * MCS rates, MAX-AMSDU, HT-20-40 and HT_CAP_SGI_40
+ * AMPDU density and AMPDU factor.
+ * All values are treated as suggestions and may be ignored
+ * by the driver as required. The actual values may be seen in
+ * the station debugfs ht_caps file.
+ *
+ * @NL80211_ATTR_DFS_REGION: region for regulatory rules which this country
+ * abides to when initiating radiation on DFS channels. A country maps
+ * to one DFS region.
*
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
@@ -1408,6 +1423,11 @@ enum nl80211_attrs {
NL80211_ATTR_PROBE_RESP,
+ NL80211_ATTR_DFS_REGION,
+
+ NL80211_ATTR_DISABLE_HT,
+ NL80211_ATTR_HT_CAPABILITY_MASK,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
@@ -1917,6 +1937,21 @@ enum nl80211_reg_rule_flags {
};
/**
+ * enum nl80211_dfs_regions - regulatory DFS regions
+ *
+ * @NL80211_DFS_UNSET: Country has no DFS master region specified
+ * @NL80211_DFS_FCC_: Country follows DFS master rules from FCC
+ * @NL80211_DFS_FCC_: Country follows DFS master rules from ETSI
+ * @NL80211_DFS_JP_: Country follows DFS master rules from JP/MKK/Telec
+ */
+enum nl80211_dfs_regions {
+ NL80211_DFS_UNSET = 0,
+ NL80211_DFS_FCC = 1,
+ NL80211_DFS_ETSI = 2,
+ NL80211_DFS_JP = 3,
+};
+
+/**
* enum nl80211_survey_info - survey information
*
* These attribute types are used with %NL80211_ATTR_SURVEY_INFO
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 8d7ba0961d3e..d5e18913f293 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -1044,6 +1044,15 @@ struct cfg80211_auth_request {
};
/**
+ * enum cfg80211_assoc_req_flags - Over-ride default behaviour in association.
+ *
+ * @ASSOC_REQ_DISABLE_HT: Disable HT (802.11n)
+ */
+enum cfg80211_assoc_req_flags {
+ ASSOC_REQ_DISABLE_HT = BIT(0),
+};
+
+/**
* struct cfg80211_assoc_request - (Re)Association request data
*
* This structure provides information needed to complete IEEE 802.11
@@ -1054,6 +1063,10 @@ struct cfg80211_auth_request {
* @use_mfp: Use management frame protection (IEEE 802.11w) in this association
* @crypto: crypto settings
* @prev_bssid: previous BSSID, if not %NULL use reassociate frame
+ * @flags: See &enum cfg80211_assoc_req_flags
+ * @ht_capa: HT Capabilities over-rides. Values set in ht_capa_mask
+ * will be used in ht_capa. Un-supported values will be ignored.
+ * @ht_capa_mask: The bits of ht_capa which are to be used.
*/
struct cfg80211_assoc_request {
struct cfg80211_bss *bss;
@@ -1061,6 +1074,9 @@ struct cfg80211_assoc_request {
size_t ie_len;
struct cfg80211_crypto_settings crypto;
bool use_mfp;
+ u32 flags;
+ struct ieee80211_ht_cap ht_capa;
+ struct ieee80211_ht_cap ht_capa_mask;
};
/**
@@ -1159,6 +1175,10 @@ struct cfg80211_ibss_params {
* @key_len: length of WEP key for shared key authentication
* @key_idx: index of WEP key for shared key authentication
* @key: WEP key for shared key authentication
+ * @flags: See &enum cfg80211_assoc_req_flags
+ * @ht_capa: HT Capabilities over-rides. Values set in ht_capa_mask
+ * will be used in ht_capa. Un-supported values will be ignored.
+ * @ht_capa_mask: The bits of ht_capa which are to be used.
*/
struct cfg80211_connect_params {
struct ieee80211_channel *channel;
@@ -1172,6 +1192,9 @@ struct cfg80211_connect_params {
struct cfg80211_crypto_settings crypto;
const u8 *key;
u8 key_len, key_idx;
+ u32 flags;
+ struct ieee80211_ht_cap ht_capa;
+ struct ieee80211_ht_cap ht_capa_mask;
};
/**
@@ -1700,6 +1723,8 @@ struct cfg80211_ops {
* cfg80211_report_obss_beacon().
* @WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD: When operating as an AP, the device
* responds to probe-requests in hardware.
+ * @WIPHY_FLAG_OFFCHAN_TX: Device supports direct off-channel TX.
+ * @WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL: Device supports remain-on-channel call.
*/
enum wiphy_flags {
WIPHY_FLAG_CUSTOM_REGULATORY = BIT(0),
@@ -1721,6 +1746,8 @@ enum wiphy_flags {
WIPHY_FLAG_HAVE_AP_SME = BIT(17),
WIPHY_FLAG_REPORTS_OBSS = BIT(18),
WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD = BIT(19),
+ WIPHY_FLAG_OFFCHAN_TX = BIT(20),
+ WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL = BIT(21),
};
/**
@@ -1934,6 +1961,8 @@ struct wiphy_wowlan_support {
* @wowlan: WoWLAN support information
*
* @ap_sme_capa: AP SME capabilities, flags from &enum nl80211_ap_sme_features.
+ * @ht_capa_mod_mask: Specify what ht_cap values can be over-ridden.
+ * If null, then none can be over-ridden.
*/
struct wiphy {
/* assign these fields before you register the wiphy */
@@ -2023,6 +2052,8 @@ struct wiphy {
/* dir in debugfs: ieee80211/<wiphyname> */
struct dentry *debugfsdir;
+ const struct ieee80211_ht_cap *ht_capa_mod_mask;
+
#ifdef CONFIG_NET_NS
/* the network namespace this phy lives in currently */
struct net *_net;
@@ -2387,69 +2418,6 @@ extern int ieee80211_radiotap_iterator_next(
extern const unsigned char rfc1042_header[6];
extern const unsigned char bridge_tunnel_header[6];
-/* Parsed Information Elements */
-struct ieee802_11_elems {
- u8 *ie_start;
- size_t total_len;
-
- /* pointers to IEs */
- u8 *ssid;
- u8 *supp_rates;
- u8 *fh_params;
- u8 *ds_params;
- u8 *cf_params;
- struct ieee80211_tim_ie *tim;
- u8 *ibss_params;
- u8 *challenge;
- u8 *wpa;
- u8 *rsn;
- u8 *erp_info;
- u8 *ext_supp_rates;
- u8 *wmm_info;
- u8 *wmm_param;
- struct ieee80211_ht_cap *ht_cap_elem;
- struct ieee80211_ht_info *ht_info_elem;
- struct ieee80211_meshconf_ie *mesh_config;
- u8 *mesh_id;
- u8 *peering;
- u8 *preq;
- u8 *prep;
- u8 *perr;
- struct ieee80211_rann_ie *rann;
- u8 *ch_switch_elem;
- u8 *country_elem;
- u8 *pwr_constr_elem;
- u8 *quiet_elem; /* first quite element */
- u8 *timeout_int;
-
- /* length of them, respectively */
- u8 ssid_len;
- u8 supp_rates_len;
- u8 fh_params_len;
- u8 ds_params_len;
- u8 cf_params_len;
- u8 tim_len;
- u8 ibss_params_len;
- u8 challenge_len;
- u8 wpa_len;
- u8 rsn_len;
- u8 erp_info_len;
- u8 ext_supp_rates_len;
- u8 wmm_info_len;
- u8 wmm_param_len;
- u8 mesh_id_len;
- u8 peering_len;
- u8 preq_len;
- u8 prep_len;
- u8 perr_len;
- u8 ch_switch_elem_len;
- u8 country_elem_len;
- u8 pwr_constr_elem_len;
- u8 quiet_elem_len;
- u8 num_of_quiet_elem; /* can be more the one */
- u8 timeout_int_len;
-};
-
/**
* ieee80211_get_hdrlen_from_skb - get header length from data
*
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 0756049ae76d..5b5c8a7e26d7 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -1760,11 +1760,21 @@ enum ieee80211_frame_release_type {
* skb contains the buffer starting from the IEEE 802.11 header.
* The low-level driver should send the frame out based on
* configuration in the TX control data. This handler should,
- * preferably, never fail and stop queues appropriately, more
- * importantly, however, it must never fail for A-MPDU-queues.
- * This function should return NETDEV_TX_OK except in very
- * limited cases.
- * Must be implemented and atomic.
+ * preferably, never fail and stop queues appropriately.
+ * This must be implemented if @tx_frags is not.
+ * Must be atomic.
+ *
+ * @tx_frags: Called to transmit multiple fragments of a single MSDU.
+ * This handler must consume all fragments, sending out some of
+ * them only is useless and it can't ask for some of them to be
+ * queued again. If the frame is not fragmented the queue has a
+ * single SKB only. To avoid issues with the networking stack
+ * when TX status is reported the frames should be removed from
+ * the skb queue.
+ * If this is used, the tx_info @vif and @sta pointers will be
+ * invalid -- you must not use them in that case.
+ * This must be implemented if @tx isn't.
+ * Must be atomic.
*
* @start: Called before the first netdevice attached to the hardware
* is enabled. This should turn on the hardware and must turn on
@@ -2101,6 +2111,8 @@ enum ieee80211_frame_release_type {
*/
struct ieee80211_ops {
void (*tx)(struct ieee80211_hw *hw, struct sk_buff *skb);
+ void (*tx_frags)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta, struct sk_buff_head *skbs);
int (*start)(struct ieee80211_hw *hw);
void (*stop)(struct ieee80211_hw *hw);
#ifdef CONFIG_PM
diff --git a/include/net/nfc/nci.h b/include/net/nfc/nci.h
index cdbe67139343..b61eb6c9df14 100644
--- a/include/net/nfc/nci.h
+++ b/include/net/nfc/nci.h
@@ -34,30 +34,30 @@
#define NCI_MAX_NUM_CONN 10
/* NCI Status Codes */
-#define NCI_STATUS_OK 0x00
-#define NCI_STATUS_REJECTED 0x01
-#define NCI_STATUS_RF_FRAME_CORRUPTED 0x02
-#define NCI_STATUS_FAILED 0x03
-#define NCI_STATUS_NOT_INITIALIZED 0x04
-#define NCI_STATUS_SYNTAX_ERROR 0x05
-#define NCI_STATUS_SEMANTIC_ERROR 0x06
-#define NCI_STATUS_UNKNOWN_GID 0x07
-#define NCI_STATUS_UNKNOWN_OID 0x08
-#define NCI_STATUS_INVALID_PARAM 0x09
-#define NCI_STATUS_MESSAGE_SIZE_EXCEEDED 0x0a
+#define NCI_STATUS_OK 0x00
+#define NCI_STATUS_REJECTED 0x01
+#define NCI_STATUS_RF_FRAME_CORRUPTED 0x02
+#define NCI_STATUS_FAILED 0x03
+#define NCI_STATUS_NOT_INITIALIZED 0x04
+#define NCI_STATUS_SYNTAX_ERROR 0x05
+#define NCI_STATUS_SEMANTIC_ERROR 0x06
+#define NCI_STATUS_UNKNOWN_GID 0x07
+#define NCI_STATUS_UNKNOWN_OID 0x08
+#define NCI_STATUS_INVALID_PARAM 0x09
+#define NCI_STATUS_MESSAGE_SIZE_EXCEEDED 0x0a
/* Discovery Specific Status Codes */
-#define NCI_STATUS_DISCOVERY_ALREADY_STARTED 0xa0
-#define NCI_STATUS_DISCOVERY_TARGET_ACTIVATION_FAILED 0xa1
-#define NCI_STATUS_DISCOVERY_TEAR_DOWN 0xa2
+#define NCI_STATUS_DISCOVERY_ALREADY_STARTED 0xa0
+#define NCI_STATUS_DISCOVERY_TARGET_ACTIVATION_FAILED 0xa1
+#define NCI_STATUS_DISCOVERY_TEAR_DOWN 0xa2
/* RF Interface Specific Status Codes */
-#define NCI_STATUS_RF_TRANSMISSION_ERROR 0xb0
-#define NCI_STATUS_RF_PROTOCOL_ERROR 0xb1
-#define NCI_STATUS_RF_TIMEOUT_ERROR 0xb2
+#define NCI_STATUS_RF_TRANSMISSION_ERROR 0xb0
+#define NCI_STATUS_RF_PROTOCOL_ERROR 0xb1
+#define NCI_STATUS_RF_TIMEOUT_ERROR 0xb2
/* NFCEE Interface Specific Status Codes */
-#define NCI_STATUS_MAX_ACTIVE_NFCEE_INTERFACES_REACHED 0xc0
-#define NCI_STATUS_NFCEE_INTERFACE_ACTIVATION_FAILED 0xc1
-#define NCI_STATUS_NFCEE_TRANSMISSION_ERROR 0xc2
-#define NCI_STATUS_NFCEE_PROTOCOL_ERROR 0xc3
+#define NCI_STATUS_MAX_ACTIVE_NFCEE_INTERFACES_REACHED 0xc0
+#define NCI_STATUS_NFCEE_INTERFACE_ACTIVATION_FAILED 0xc1
+#define NCI_STATUS_NFCEE_TRANSMISSION_ERROR 0xc2
+#define NCI_STATUS_NFCEE_PROTOCOL_ERROR 0xc3
#define NCI_STATUS_NFCEE_TIMEOUT_ERROR 0xc4
/* NCI RF Technology and Mode */
@@ -97,9 +97,9 @@
/* NCI RF Interfaces */
#define NCI_RF_INTERFACE_NFCEE_DIRECT 0x00
-#define NCI_RF_INTERFACE_FRAME 0x01
-#define NCI_RF_INTERFACE_ISO_DEP 0x02
-#define NCI_RF_INTERFACE_NFC_DEP 0x03
+#define NCI_RF_INTERFACE_FRAME 0x01
+#define NCI_RF_INTERFACE_ISO_DEP 0x02
+#define NCI_RF_INTERFACE_NFC_DEP 0x03
/* NCI Reset types */
#define NCI_RESET_TYPE_KEEP_CONFIG 0x00
@@ -118,22 +118,22 @@
/* NCI Discovery Types */
#define NCI_DISCOVERY_TYPE_POLL_A_PASSIVE 0x00
-#define NCI_DISCOVERY_TYPE_POLL_B_PASSIVE 0x01
-#define NCI_DISCOVERY_TYPE_POLL_F_PASSIVE 0x02
-#define NCI_DISCOVERY_TYPE_POLL_A_ACTIVE 0x03
-#define NCI_DISCOVERY_TYPE_POLL_F_ACTIVE 0x05
-#define NCI_DISCOVERY_TYPE_WAKEUP_A_ACTIVE 0x09
-#define NCI_DISCOVERY_TYPE_LISTEN_A_PASSIVE 0x80
-#define NCI_DISCOVERY_TYPE_LISTEN_B_PASSIVE 0x81
-#define NCI_DISCOVERY_TYPE_LISTEN_F_PASSIVE 0x82
-#define NCI_DISCOVERY_TYPE_LISTEN_A_ACTIVE 0x83
-#define NCI_DISCOVERY_TYPE_LISTEN_F_ACTIVE 0x85
+#define NCI_DISCOVERY_TYPE_POLL_B_PASSIVE 0x01
+#define NCI_DISCOVERY_TYPE_POLL_F_PASSIVE 0x02
+#define NCI_DISCOVERY_TYPE_POLL_A_ACTIVE 0x03
+#define NCI_DISCOVERY_TYPE_POLL_F_ACTIVE 0x05
+#define NCI_DISCOVERY_TYPE_WAKEUP_A_ACTIVE 0x09
+#define NCI_DISCOVERY_TYPE_LISTEN_A_PASSIVE 0x80
+#define NCI_DISCOVERY_TYPE_LISTEN_B_PASSIVE 0x81
+#define NCI_DISCOVERY_TYPE_LISTEN_F_PASSIVE 0x82
+#define NCI_DISCOVERY_TYPE_LISTEN_A_ACTIVE 0x83
+#define NCI_DISCOVERY_TYPE_LISTEN_F_ACTIVE 0x85
/* NCI Deactivation Type */
-#define NCI_DEACTIVATE_TYPE_IDLE_MODE 0x00
-#define NCI_DEACTIVATE_TYPE_SLEEP_MODE 0x01
-#define NCI_DEACTIVATE_TYPE_SLEEP_AF_MODE 0x02
-#define NCI_DEACTIVATE_TYPE_DISCOVERY 0x03
+#define NCI_DEACTIVATE_TYPE_IDLE_MODE 0x00
+#define NCI_DEACTIVATE_TYPE_SLEEP_MODE 0x01
+#define NCI_DEACTIVATE_TYPE_SLEEP_AF_MODE 0x02
+#define NCI_DEACTIVATE_TYPE_DISCOVERY 0x03
/* Message Type (MT) */
#define NCI_MT_DATA_PKT 0x00
@@ -165,10 +165,10 @@
#define nci_conn_id(hdr) (__u8)(((hdr)[0])&0x0f)
/* GID values */
-#define NCI_GID_CORE 0x0
-#define NCI_GID_RF_MGMT 0x1
-#define NCI_GID_NFCEE_MGMT 0x2
-#define NCI_GID_PROPRIETARY 0xf
+#define NCI_GID_CORE 0x0
+#define NCI_GID_RF_MGMT 0x1
+#define NCI_GID_NFCEE_MGMT 0x2
+#define NCI_GID_PROPRIETARY 0xf
/* ---- NCI Packet structures ---- */
#define NCI_CTRL_HDR_SIZE 3
diff --git a/include/net/regulatory.h b/include/net/regulatory.h
index eb7d3c2d4274..a5f79933e211 100644
--- a/include/net/regulatory.h
+++ b/include/net/regulatory.h
@@ -48,6 +48,10 @@ enum environment_cap {
* 99 - built by driver but a specific alpha2 cannot be determined
* 98 - result of an intersection between two regulatory domains
* 97 - regulatory domain has not yet been configured
+ * @dfs_region: If CRDA responded with a regulatory domain that requires
+ * DFS master operation on a known DFS region (NL80211_DFS_*),
+ * dfs_region represents that region. Drivers can use this and the
+ * @alpha2 to adjust their device's DFS parameters as required.
* @intersect: indicates whether the wireless core should intersect
* the requested regulatory domain with the presently set regulatory
* domain.
@@ -67,6 +71,7 @@ struct regulatory_request {
int wiphy_idx;
enum nl80211_reg_initiator initiator;
char alpha2[2];
+ u8 dfs_region;
bool intersect;
bool processed;
enum environment_cap country_ie_env;
@@ -93,6 +98,7 @@ struct ieee80211_reg_rule {
struct ieee80211_regdomain {
u32 n_reg_rules;
char alpha2[2];
+ u8 dfs_region;
struct ieee80211_reg_rule reg_rules[];
};
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-17 07:17:35 +0000