diff options
Diffstat (limited to 'include/uapi')
-rw-r--r-- | include/uapi/linux/audit.h | 8 | ||||
-rw-r--r-- | include/uapi/linux/can.h | 6 | ||||
-rw-r--r-- | include/uapi/linux/can/bcm.h | 6 | ||||
-rw-r--r-- | include/uapi/linux/can/error.h | 6 | ||||
-rw-r--r-- | include/uapi/linux/can/gw.h | 6 | ||||
-rw-r--r-- | include/uapi/linux/can/netlink.h | 6 | ||||
-rw-r--r-- | include/uapi/linux/can/raw.h | 6 | ||||
-rw-r--r-- | include/uapi/linux/capability.h | 7 | ||||
-rw-r--r-- | include/uapi/linux/ethtool.h | 32 | ||||
-rw-r--r-- | include/uapi/linux/filter.h | 3 | ||||
-rw-r--r-- | include/uapi/linux/if_fddi.h | 90 | ||||
-rw-r--r-- | include/uapi/linux/if_link.h | 9 | ||||
-rw-r--r-- | include/uapi/linux/l2tp.h | 2 | ||||
-rw-r--r-- | include/uapi/linux/netfilter/nf_tables.h | 37 | ||||
-rw-r--r-- | include/uapi/linux/nl80211.h | 42 | ||||
-rw-r--r-- | include/uapi/linux/openvswitch.h | 4 | ||||
-rw-r--r-- | include/uapi/linux/tipc.h | 23 | ||||
-rw-r--r-- | include/uapi/linux/tipc_config.h | 10 | ||||
-rw-r--r-- | include/uapi/linux/udp.h | 2 |
19 files changed, 230 insertions, 75 deletions
diff --git a/include/uapi/linux/audit.h b/include/uapi/linux/audit.h index 1b1efddb91cd..b21ea454bd33 100644 --- a/include/uapi/linux/audit.h +++ b/include/uapi/linux/audit.h @@ -385,6 +385,14 @@ enum { */ #define AUDIT_MESSAGE_TEXT_MAX 8560 +/* Multicast Netlink socket groups (default up to 32) */ +enum audit_nlgrps { + AUDIT_NLGRP_NONE, /* Group 0 not used */ + AUDIT_NLGRP_READLOG, /* "best effort" read only socket */ + __AUDIT_NLGRP_MAX +}; +#define AUDIT_NLGRP_MAX (__AUDIT_NLGRP_MAX - 1) + struct audit_status { __u32 mask; /* Bit mask for valid entries */ __u32 enabled; /* 1 = enabled, 0 = disabled */ diff --git a/include/uapi/linux/can.h b/include/uapi/linux/can.h index 5d9d1d140718..41892f720057 100644 --- a/include/uapi/linux/can.h +++ b/include/uapi/linux/can.h @@ -42,8 +42,8 @@ * DAMAGE. */ -#ifndef CAN_H -#define CAN_H +#ifndef _UAPI_CAN_H +#define _UAPI_CAN_H #include <linux/types.h> #include <linux/socket.h> @@ -191,4 +191,4 @@ struct can_filter { #define CAN_INV_FILTER 0x20000000U /* to be set in can_filter.can_id */ -#endif /* CAN_H */ +#endif /* !_UAPI_CAN_H */ diff --git a/include/uapi/linux/can/bcm.h b/include/uapi/linux/can/bcm.h index 382251a1d214..89ddb9dc9bdf 100644 --- a/include/uapi/linux/can/bcm.h +++ b/include/uapi/linux/can/bcm.h @@ -41,8 +41,8 @@ * DAMAGE. */ -#ifndef CAN_BCM_H -#define CAN_BCM_H +#ifndef _UAPI_CAN_BCM_H +#define _UAPI_CAN_BCM_H #include <linux/types.h> #include <linux/can.h> @@ -95,4 +95,4 @@ enum { #define TX_RESET_MULTI_IDX 0x0200 #define RX_RTR_FRAME 0x0400 -#endif /* CAN_BCM_H */ +#endif /* !_UAPI_CAN_BCM_H */ diff --git a/include/uapi/linux/can/error.h b/include/uapi/linux/can/error.h index b63204545320..c247446ab25a 100644 --- a/include/uapi/linux/can/error.h +++ b/include/uapi/linux/can/error.h @@ -41,8 +41,8 @@ * DAMAGE. */ -#ifndef CAN_ERROR_H -#define CAN_ERROR_H +#ifndef _UAPI_CAN_ERROR_H +#define _UAPI_CAN_ERROR_H #define CAN_ERR_DLC 8 /* dlc for error message frames */ @@ -120,4 +120,4 @@ /* controller specific additional information / data[5..7] */ -#endif /* CAN_ERROR_H */ +#endif /* _UAPI_CAN_ERROR_H */ diff --git a/include/uapi/linux/can/gw.h b/include/uapi/linux/can/gw.h index 844c8964bdfe..3e6184cf2f6d 100644 --- a/include/uapi/linux/can/gw.h +++ b/include/uapi/linux/can/gw.h @@ -41,8 +41,8 @@ * DAMAGE. */ -#ifndef CAN_GW_H -#define CAN_GW_H +#ifndef _UAPI_CAN_GW_H +#define _UAPI_CAN_GW_H #include <linux/types.h> #include <linux/can.h> @@ -200,4 +200,4 @@ enum { * Beware of sending unpacked or aligned structs! */ -#endif +#endif /* !_UAPI_CAN_GW_H */ diff --git a/include/uapi/linux/can/netlink.h b/include/uapi/linux/can/netlink.h index 7e2e1863db16..813d11f54977 100644 --- a/include/uapi/linux/can/netlink.h +++ b/include/uapi/linux/can/netlink.h @@ -15,8 +15,8 @@ * GNU General Public License for more details. */ -#ifndef CAN_NETLINK_H -#define CAN_NETLINK_H +#ifndef _UAPI_CAN_NETLINK_H +#define _UAPI_CAN_NETLINK_H #include <linux/types.h> @@ -130,4 +130,4 @@ enum { #define IFLA_CAN_MAX (__IFLA_CAN_MAX - 1) -#endif /* CAN_NETLINK_H */ +#endif /* !_UAPI_CAN_NETLINK_H */ diff --git a/include/uapi/linux/can/raw.h b/include/uapi/linux/can/raw.h index c7d8c334e0ce..78ec76fd89a6 100644 --- a/include/uapi/linux/can/raw.h +++ b/include/uapi/linux/can/raw.h @@ -42,8 +42,8 @@ * DAMAGE. */ -#ifndef CAN_RAW_H -#define CAN_RAW_H +#ifndef _UAPI_CAN_RAW_H +#define _UAPI_CAN_RAW_H #include <linux/can.h> @@ -59,4 +59,4 @@ enum { CAN_RAW_FD_FRAMES, /* allow CAN FD frames (default:off) */ }; -#endif +#endif /* !_UAPI_CAN_RAW_H */ diff --git a/include/uapi/linux/capability.h b/include/uapi/linux/capability.h index 154dd6d3c8fe..12c37a197d24 100644 --- a/include/uapi/linux/capability.h +++ b/include/uapi/linux/capability.h @@ -347,7 +347,12 @@ struct vfs_cap_data { #define CAP_BLOCK_SUSPEND 36 -#define CAP_LAST_CAP CAP_BLOCK_SUSPEND +/* Allow reading the audit log via multicast netlink socket */ + +#define CAP_AUDIT_READ 37 + + +#define CAP_LAST_CAP CAP_AUDIT_READ #define cap_valid(x) ((x) >= 0 && (x) <= CAP_LAST_CAP) diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h index fd161e91b6d7..d47d31d6fa0e 100644 --- a/include/uapi/linux/ethtool.h +++ b/include/uapi/linux/ethtool.h @@ -847,6 +847,35 @@ struct ethtool_rxfh_indir { }; /** + * struct ethtool_rxfh - command to get/set RX flow hash indir or/and hash key. + * @cmd: Specific command number - %ETHTOOL_GRSSH or %ETHTOOL_SRSSH + * @rss_context: RSS context identifier. + * @indir_size: On entry, the array size of the user buffer, which may be zero. + * On return from %ETHTOOL_GRSSH, the array size of the hardware + * indirection table. + * @key_size: On entry, the array size of the user buffer in bytes, + * which may be zero. + * On return from %ETHTOOL_GRSSH, the size of the RSS hash key. + * @rsvd: Reserved for future extensions. + * @rss_config: RX ring/queue index for each hash value i.e., indirection table + * of size @indir_size followed by hash key of size @key_size. + * + * For %ETHTOOL_GRSSH, a @indir_size and key_size of zero means that only the + * size should be returned. For %ETHTOOL_SRSSH, a @indir_size of 0xDEADBEEF + * means that indir table setting is not requested and a @indir_size of zero + * means the indir table should be reset to default values. This last feature + * is not supported by the original implementations. + */ +struct ethtool_rxfh { + __u32 cmd; + __u32 rss_context; + __u32 indir_size; + __u32 key_size; + __u32 rsvd[2]; + __u32 rss_config[0]; +}; + +/** * struct ethtool_rx_ntuple_flow_spec - specification for RX flow filter * @flow_type: Type of match to perform, e.g. %TCP_V4_FLOW * @h_u: Flow field values to match (dependent on @flow_type) @@ -1118,6 +1147,9 @@ enum ethtool_sfeatures_retval_bits { #define ETHTOOL_GEEE 0x00000044 /* Get EEE settings */ #define ETHTOOL_SEEE 0x00000045 /* Set EEE settings */ +#define ETHTOOL_GRSSH 0x00000046 /* Get RX flow hash configuration */ +#define ETHTOOL_SRSSH 0x00000047 /* Set RX flow hash configuration */ + /* compatibility with older code */ #define SPARC_ETH_GSET ETHTOOL_GSET #define SPARC_ETH_SSET ETHTOOL_SSET diff --git a/include/uapi/linux/filter.h b/include/uapi/linux/filter.h index 8eb9ccaa5b48..253b4d42cf2b 100644 --- a/include/uapi/linux/filter.h +++ b/include/uapi/linux/filter.h @@ -130,7 +130,8 @@ struct sock_fprog { /* Required for SO_ATTACH_FILTER. */ #define SKF_AD_VLAN_TAG 44 #define SKF_AD_VLAN_TAG_PRESENT 48 #define SKF_AD_PAY_OFFSET 52 -#define SKF_AD_MAX 56 +#define SKF_AD_RANDOM 56 +#define SKF_AD_MAX 60 #define SKF_NET_OFF (-0x100000) #define SKF_LL_OFF (-0x200000) diff --git a/include/uapi/linux/if_fddi.h b/include/uapi/linux/if_fddi.h index 0d36909c3aef..1086cd9f6754 100644 --- a/include/uapi/linux/if_fddi.h +++ b/include/uapi/linux/if_fddi.h @@ -30,74 +30,76 @@ * Define max and min legal sizes. The frame sizes do not include * 4 byte FCS/CRC (frame check sequence). */ -#define FDDI_K_ALEN 6 /* Octets in one FDDI address */ -#define FDDI_K_8022_HLEN 16 /* Total octets in 802.2 header */ -#define FDDI_K_SNAP_HLEN 21 /* Total octets in 802.2 SNAP header */ -#define FDDI_K_8022_ZLEN 16 /* Min octets in 802.2 frame sans FCS */ -#define FDDI_K_SNAP_ZLEN 21 /* Min octets in 802.2 SNAP frame sans FCS */ +#define FDDI_K_ALEN 6 /* Octets in one FDDI address */ +#define FDDI_K_8022_HLEN 16 /* Total octets in 802.2 header */ +#define FDDI_K_SNAP_HLEN 21 /* Total octets in 802.2 SNAP header */ +#define FDDI_K_8022_ZLEN 16 /* Min octets in 802.2 frame sans + FCS */ +#define FDDI_K_SNAP_ZLEN 21 /* Min octets in 802.2 SNAP frame sans + FCS */ #define FDDI_K_8022_DLEN 4475 /* Max octets in 802.2 payload */ #define FDDI_K_SNAP_DLEN 4470 /* Max octets in 802.2 SNAP payload */ -#define FDDI_K_LLC_ZLEN 13 /* Min octets in LLC frame sans FCS */ +#define FDDI_K_LLC_ZLEN 13 /* Min octets in LLC frame sans FCS */ #define FDDI_K_LLC_LEN 4491 /* Max octets in LLC frame sans FCS */ +#define FDDI_K_OUI_LEN 3 /* Octets in OUI in 802.2 SNAP + header */ /* Define FDDI Frame Control (FC) Byte values */ -#define FDDI_FC_K_VOID 0x00 -#define FDDI_FC_K_NON_RESTRICTED_TOKEN 0x80 -#define FDDI_FC_K_RESTRICTED_TOKEN 0xC0 -#define FDDI_FC_K_SMT_MIN 0x41 -#define FDDI_FC_K_SMT_MAX 0x4F -#define FDDI_FC_K_MAC_MIN 0xC1 -#define FDDI_FC_K_MAC_MAX 0xCF -#define FDDI_FC_K_ASYNC_LLC_MIN 0x50 -#define FDDI_FC_K_ASYNC_LLC_DEF 0x54 -#define FDDI_FC_K_ASYNC_LLC_MAX 0x5F -#define FDDI_FC_K_SYNC_LLC_MIN 0xD0 -#define FDDI_FC_K_SYNC_LLC_MAX 0xD7 -#define FDDI_FC_K_IMPLEMENTOR_MIN 0x60 -#define FDDI_FC_K_IMPLEMENTOR_MAX 0x6F -#define FDDI_FC_K_RESERVED_MIN 0x70 -#define FDDI_FC_K_RESERVED_MAX 0x7F +#define FDDI_FC_K_VOID 0x00 +#define FDDI_FC_K_NON_RESTRICTED_TOKEN 0x80 +#define FDDI_FC_K_RESTRICTED_TOKEN 0xC0 +#define FDDI_FC_K_SMT_MIN 0x41 +#define FDDI_FC_K_SMT_MAX 0x4F +#define FDDI_FC_K_MAC_MIN 0xC1 +#define FDDI_FC_K_MAC_MAX 0xCF +#define FDDI_FC_K_ASYNC_LLC_MIN 0x50 +#define FDDI_FC_K_ASYNC_LLC_DEF 0x54 +#define FDDI_FC_K_ASYNC_LLC_MAX 0x5F +#define FDDI_FC_K_SYNC_LLC_MIN 0xD0 +#define FDDI_FC_K_SYNC_LLC_MAX 0xD7 +#define FDDI_FC_K_IMPLEMENTOR_MIN 0x60 +#define FDDI_FC_K_IMPLEMENTOR_MAX 0x6F +#define FDDI_FC_K_RESERVED_MIN 0x70 +#define FDDI_FC_K_RESERVED_MAX 0x7F /* Define LLC and SNAP constants */ -#define FDDI_EXTENDED_SAP 0xAA +#define FDDI_EXTENDED_SAP 0xAA #define FDDI_UI_CMD 0x03 /* Define 802.2 Type 1 header */ struct fddi_8022_1_hdr { - __u8 dsap; /* destination service access point */ - __u8 ssap; /* source service access point */ - __u8 ctrl; /* control byte #1 */ + __u8 dsap; /* destination service access point */ + __u8 ssap; /* source service access point */ + __u8 ctrl; /* control byte #1 */ } __attribute__((packed)); /* Define 802.2 Type 2 header */ struct fddi_8022_2_hdr { - __u8 dsap; /* destination service access point */ - __u8 ssap; /* source service access point */ - __u8 ctrl_1; /* control byte #1 */ - __u8 ctrl_2; /* control byte #2 */ + __u8 dsap; /* destination service access point */ + __u8 ssap; /* source service access point */ + __u8 ctrl_1; /* control byte #1 */ + __u8 ctrl_2; /* control byte #2 */ } __attribute__((packed)); /* Define 802.2 SNAP header */ -#define FDDI_K_OUI_LEN 3 struct fddi_snap_hdr { - __u8 dsap; /* always 0xAA */ - __u8 ssap; /* always 0xAA */ - __u8 ctrl; /* always 0x03 */ + __u8 dsap; /* always 0xAA */ + __u8 ssap; /* always 0xAA */ + __u8 ctrl; /* always 0x03 */ __u8 oui[FDDI_K_OUI_LEN]; /* organizational universal id */ - __be16 ethertype; /* packet type ID field */ + __be16 ethertype; /* packet type ID field */ } __attribute__((packed)); /* Define FDDI LLC frame header */ struct fddihdr { - __u8 fc; /* frame control */ - __u8 daddr[FDDI_K_ALEN]; /* destination address */ - __u8 saddr[FDDI_K_ALEN]; /* source address */ - union - { - struct fddi_8022_1_hdr llc_8022_1; - struct fddi_8022_2_hdr llc_8022_2; - struct fddi_snap_hdr llc_snap; - } hdr; + __u8 fc; /* frame control */ + __u8 daddr[FDDI_K_ALEN]; /* destination address */ + __u8 saddr[FDDI_K_ALEN]; /* source address */ + union { + struct fddi_8022_1_hdr llc_8022_1; + struct fddi_8022_2_hdr llc_8022_2; + struct fddi_snap_hdr llc_snap; + } hdr; } __attribute__((packed)); diff --git a/include/uapi/linux/if_link.h b/include/uapi/linux/if_link.h index 9a7f7ace6649..622e7910b8cc 100644 --- a/include/uapi/linux/if_link.h +++ b/include/uapi/linux/if_link.h @@ -399,9 +399,10 @@ enum { IFLA_VF_UNSPEC, IFLA_VF_MAC, /* Hardware queue specific attributes */ IFLA_VF_VLAN, - IFLA_VF_TX_RATE, /* TX Bandwidth Allocation */ + IFLA_VF_TX_RATE, /* Max TX Bandwidth Allocation */ IFLA_VF_SPOOFCHK, /* Spoof Checking on/off switch */ IFLA_VF_LINK_STATE, /* link state enable/disable/auto switch */ + IFLA_VF_RATE, /* Min and Max TX Bandwidth Allocation */ __IFLA_VF_MAX, }; @@ -423,6 +424,12 @@ struct ifla_vf_tx_rate { __u32 rate; /* Max TX bandwidth in Mbps, 0 disables throttling */ }; +struct ifla_vf_rate { + __u32 vf; + __u32 min_tx_rate; /* Min Bandwidth in Mbps */ + __u32 max_tx_rate; /* Max Bandwidth in Mbps */ +}; + struct ifla_vf_spoofchk { __u32 vf; __u32 setting; diff --git a/include/uapi/linux/l2tp.h b/include/uapi/linux/l2tp.h index 8adb68160327..21caa2631c20 100644 --- a/include/uapi/linux/l2tp.h +++ b/include/uapi/linux/l2tp.h @@ -124,6 +124,8 @@ enum { L2TP_ATTR_STATS, /* nested */ L2TP_ATTR_IP6_SADDR, /* struct in6_addr */ L2TP_ATTR_IP6_DADDR, /* struct in6_addr */ + L2TP_ATTR_UDP_ZERO_CSUM6_TX, /* u8 */ + L2TP_ATTR_UDP_ZERO_CSUM6_RX, /* u8 */ __L2TP_ATTR_MAX, }; diff --git a/include/uapi/linux/netfilter/nf_tables.h b/include/uapi/linux/netfilter/nf_tables.h index c88ccbfda5f1..2a88f645a5d8 100644 --- a/include/uapi/linux/netfilter/nf_tables.h +++ b/include/uapi/linux/netfilter/nf_tables.h @@ -212,6 +212,29 @@ enum nft_set_flags { }; /** + * enum nft_set_policies - set selection policy + * + * @NFT_SET_POL_PERFORMANCE: prefer high performance over low memory use + * @NFT_SET_POL_MEMORY: prefer low memory use over high performance + */ +enum nft_set_policies { + NFT_SET_POL_PERFORMANCE, + NFT_SET_POL_MEMORY, +}; + +/** + * enum nft_set_desc_attributes - set element description + * + * @NFTA_SET_DESC_SIZE: number of elements in set (NLA_U32) + */ +enum nft_set_desc_attributes { + NFTA_SET_DESC_UNSPEC, + NFTA_SET_DESC_SIZE, + __NFTA_SET_DESC_MAX +}; +#define NFTA_SET_DESC_MAX (__NFTA_SET_DESC_MAX - 1) + +/** * enum nft_set_attributes - nf_tables set netlink attributes * * @NFTA_SET_TABLE: table name (NLA_STRING) @@ -221,6 +244,9 @@ enum nft_set_flags { * @NFTA_SET_KEY_LEN: key data length (NLA_U32) * @NFTA_SET_DATA_TYPE: mapping data type (NLA_U32) * @NFTA_SET_DATA_LEN: mapping data length (NLA_U32) + * @NFTA_SET_POLICY: selection policy (NLA_U32) + * @NFTA_SET_DESC: set description (NLA_NESTED) + * @NFTA_SET_ID: uniquely identifies a set in a transaction (NLA_U32) */ enum nft_set_attributes { NFTA_SET_UNSPEC, @@ -231,6 +257,9 @@ enum nft_set_attributes { NFTA_SET_KEY_LEN, NFTA_SET_DATA_TYPE, NFTA_SET_DATA_LEN, + NFTA_SET_POLICY, + NFTA_SET_DESC, + NFTA_SET_ID, __NFTA_SET_MAX }; #define NFTA_SET_MAX (__NFTA_SET_MAX - 1) @@ -266,12 +295,14 @@ enum nft_set_elem_attributes { * @NFTA_SET_ELEM_LIST_TABLE: table of the set to be changed (NLA_STRING) * @NFTA_SET_ELEM_LIST_SET: name of the set to be changed (NLA_STRING) * @NFTA_SET_ELEM_LIST_ELEMENTS: list of set elements (NLA_NESTED: nft_set_elem_attributes) + * @NFTA_SET_ELEM_LIST_SET_ID: uniquely identifies a set in a transaction (NLA_U32) */ enum nft_set_elem_list_attributes { NFTA_SET_ELEM_LIST_UNSPEC, NFTA_SET_ELEM_LIST_TABLE, NFTA_SET_ELEM_LIST_SET, NFTA_SET_ELEM_LIST_ELEMENTS, + NFTA_SET_ELEM_LIST_SET_ID, __NFTA_SET_ELEM_LIST_MAX }; #define NFTA_SET_ELEM_LIST_MAX (__NFTA_SET_ELEM_LIST_MAX - 1) @@ -457,12 +488,14 @@ enum nft_cmp_attributes { * @NFTA_LOOKUP_SET: name of the set where to look for (NLA_STRING) * @NFTA_LOOKUP_SREG: source register of the data to look for (NLA_U32: nft_registers) * @NFTA_LOOKUP_DREG: destination register (NLA_U32: nft_registers) + * @NFTA_LOOKUP_SET_ID: uniquely identifies a set in a transaction (NLA_U32) */ enum nft_lookup_attributes { NFTA_LOOKUP_UNSPEC, NFTA_LOOKUP_SET, NFTA_LOOKUP_SREG, NFTA_LOOKUP_DREG, + NFTA_LOOKUP_SET_ID, __NFTA_LOOKUP_MAX }; #define NFTA_LOOKUP_MAX (__NFTA_LOOKUP_MAX - 1) @@ -536,6 +569,8 @@ enum nft_exthdr_attributes { * @NFT_META_SECMARK: packet secmark (skb->secmark) * @NFT_META_NFPROTO: netfilter protocol * @NFT_META_L4PROTO: layer 4 protocol number + * @NFT_META_BRI_IIFNAME: packet input bridge interface name + * @NFT_META_BRI_OIFNAME: packet output bridge interface name */ enum nft_meta_keys { NFT_META_LEN, @@ -555,6 +590,8 @@ enum nft_meta_keys { NFT_META_SECMARK, NFT_META_NFPROTO, NFT_META_L4PROTO, + NFT_META_BRI_IIFNAME, + NFT_META_BRI_OIFNAME, }; /** diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 194c1eab04d8..9922b9b828a2 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -1579,6 +1579,10 @@ enum nl80211_commands { * @NL80211_ATTR_TDLS_PEER_CAPABILITY: flags for TDLS peer capabilities, u32. * As specified in the &enum nl80211_tdls_peer_capability. * + * @NL80211_ATTR_IFACE_SOCKET_OWNER: flag attribute, if set during interface + * creation then the new interface will be owned by the netlink socket + * that created it and will be destroyed when the socket is closed + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -1914,6 +1918,8 @@ enum nl80211_attrs { NL80211_ATTR_TDLS_PEER_CAPABILITY, + NL80211_ATTR_IFACE_SOCKET_OWNER, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -2336,9 +2342,34 @@ enum nl80211_band_attr { * using this channel as the primary or any of the secondary channels * isn't possible * @NL80211_FREQUENCY_ATTR_DFS_CAC_TIME: DFS CAC time in milliseconds. + * @NL80211_FREQUENCY_ATTR_INDOOR_ONLY: Only indoor use is permitted on this + * channel. A channel that has the INDOOR_ONLY attribute can only be + * used when there is a clear assessment that the device is operating in + * an indoor surroundings, i.e., it is connected to AC power (and not + * through portable DC inverters) or is under the control of a master + * that is acting as an AP and is connected to AC power. + * @NL80211_FREQUENCY_ATTR_GO_CONCURRENT: GO operation is allowed on this + * channel if it's connected concurrently to a BSS on the same channel on + * the 2 GHz band or to a channel in the same UNII band (on the 5 GHz + * band), and IEEE80211_CHAN_RADAR is not set. Instantiating a GO on a + * channel that has the GO_CONCURRENT attribute set can be done when there + * is a clear assessment that the device is operating under the guidance of + * an authorized master, i.e., setting up a GO while the device is also + * connected to an AP with DFS and radar detection on the UNII band (it is + * up to user-space, i.e., wpa_supplicant to perform the required + * verifications) + * @NL80211_FREQUENCY_ATTR_NO_20MHZ: 20 MHz operation is not allowed + * on this channel in current regulatory domain. + * @NL80211_FREQUENCY_ATTR_NO_10MHZ: 10 MHz operation is not allowed + * on this channel in current regulatory domain. * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number * currently defined * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use + * + * See https://apps.fcc.gov/eas/comments/GetPublishedDocument.html?id=327&tn=528122 + * for more information on the FCC description of the relaxations allowed + * by NL80211_FREQUENCY_ATTR_INDOOR_ONLY and + * NL80211_FREQUENCY_ATTR_GO_CONCURRENT. */ enum nl80211_frequency_attr { __NL80211_FREQUENCY_ATTR_INVALID, @@ -2355,6 +2386,10 @@ enum nl80211_frequency_attr { NL80211_FREQUENCY_ATTR_NO_80MHZ, NL80211_FREQUENCY_ATTR_NO_160MHZ, NL80211_FREQUENCY_ATTR_DFS_CAC_TIME, + NL80211_FREQUENCY_ATTR_INDOOR_ONLY, + NL80211_FREQUENCY_ATTR_GO_CONCURRENT, + NL80211_FREQUENCY_ATTR_NO_20MHZ, + NL80211_FREQUENCY_ATTR_NO_10MHZ, /* keep last */ __NL80211_FREQUENCY_ATTR_AFTER_LAST, @@ -2573,10 +2608,13 @@ enum nl80211_dfs_regions { * present has been registered with the wireless core that * has listed NL80211_FEATURE_CELL_BASE_REG_HINTS as a * supported feature. + * @NL80211_USER_REG_HINT_INDOOR: a user sent an hint indicating that the + * platform is operating in an indoor environment. */ enum nl80211_user_reg_hint_type { NL80211_USER_REG_HINT_USER = 0, NL80211_USER_REG_HINT_CELL_BASE = 1, + NL80211_USER_REG_HINT_INDOOR = 2, }; /** @@ -3893,6 +3931,9 @@ enum nl80211_ap_sme_features { * interface. An active monitor interface behaves like a normal monitor * interface, but gets added to the driver. It ensures that incoming * unicast packets directed at the configured interface address get ACKed. + * @NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE: This driver supports dynamic + * channel bandwidth change (e.g., HT 20 <-> 40 MHz channel) during the + * lifetime of a BSS. */ enum nl80211_feature_flags { NL80211_FEATURE_SK_TX_STATUS = 1 << 0, @@ -3913,6 +3954,7 @@ enum nl80211_feature_flags { NL80211_FEATURE_FULL_AP_CLIENT_STATE = 1 << 15, NL80211_FEATURE_USERSPACE_MPM = 1 << 16, NL80211_FEATURE_ACTIVE_MONITOR = 1 << 17, + NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE = 1 << 18, }; /** diff --git a/include/uapi/linux/openvswitch.h b/include/uapi/linux/openvswitch.h index 970553cbbc8e..0b979ee4bfc0 100644 --- a/include/uapi/linux/openvswitch.h +++ b/include/uapi/linux/openvswitch.h @@ -395,7 +395,9 @@ struct ovs_key_nd { * @OVS_FLOW_ATTR_ACTIONS: Nested %OVS_ACTION_ATTR_* attributes specifying * the actions to take for packets that match the key. Always present in * notifications. Required for %OVS_FLOW_CMD_NEW requests, optional for - * %OVS_FLOW_CMD_SET requests. + * %OVS_FLOW_CMD_SET requests. An %OVS_FLOW_CMD_SET without + * %OVS_FLOW_ATTR_ACTIONS will not modify the actions. To clear the actions, + * an %OVS_FLOW_ATTR_ACTIONS without any nested attributes must be given. * @OVS_FLOW_ATTR_STATS: &struct ovs_flow_stats giving statistics for this * flow. Present in notifications if the stats would be nonzero. Ignored in * requests. diff --git a/include/uapi/linux/tipc.h b/include/uapi/linux/tipc.h index 852373d27dbb..6f71b9b41595 100644 --- a/include/uapi/linux/tipc.h +++ b/include/uapi/linux/tipc.h @@ -38,6 +38,7 @@ #define _LINUX_TIPC_H_ #include <linux/types.h> +#include <linux/sockios.h> /* * TIPC addressing primitives @@ -87,6 +88,7 @@ static inline unsigned int tipc_node(__u32 addr) #define TIPC_CFG_SRV 0 /* configuration service name type */ #define TIPC_TOP_SRV 1 /* topology service name type */ +#define TIPC_LINK_STATE 2 /* link state name type */ #define TIPC_RESERVED_TYPES 64 /* lowest user-publishable name type */ /* @@ -206,4 +208,25 @@ struct sockaddr_tipc { #define TIPC_NODE_RECVQ_DEPTH 131 /* Default: none (read only) */ #define TIPC_SOCK_RECVQ_DEPTH 132 /* Default: none (read only) */ +/* + * Maximum sizes of TIPC bearer-related names (including terminating NULL) + * The string formatting for each name element is: + * media: media + * interface: media:interface name + * link: Z.C.N:interface-Z.C.N:interface + * + */ + +#define TIPC_MAX_MEDIA_NAME 16 +#define TIPC_MAX_IF_NAME 16 +#define TIPC_MAX_BEARER_NAME 32 +#define TIPC_MAX_LINK_NAME 60 + +#define SIOCGETLINKNAME SIOCPROTOPRIVATE + +struct tipc_sioc_ln_req { + __u32 peer; + __u32 bearer_id; + char linkname[TIPC_MAX_LINK_NAME]; +}; #endif diff --git a/include/uapi/linux/tipc_config.h b/include/uapi/linux/tipc_config.h index 6b0bff09b3a7..41a76acbb305 100644 --- a/include/uapi/linux/tipc_config.h +++ b/include/uapi/linux/tipc_config.h @@ -39,6 +39,7 @@ #include <linux/types.h> #include <linux/string.h> +#include <linux/tipc.h> #include <asm/byteorder.h> #ifndef __KERNEL__ @@ -155,15 +156,6 @@ #define TIPC_TLV_PORT_REF 26 /* 32-bit port reference */ /* - * Maximum sizes of TIPC bearer-related names (including terminating NUL) - */ - -#define TIPC_MAX_MEDIA_NAME 16 /* format = media */ -#define TIPC_MAX_IF_NAME 16 /* format = interface */ -#define TIPC_MAX_BEARER_NAME 32 /* format = media:interface */ -#define TIPC_MAX_LINK_NAME 60 /* format = Z.C.N:interface-Z.C.N:interface */ - -/* * Link priority limits (min, default, max, media default) */ diff --git a/include/uapi/linux/udp.h b/include/uapi/linux/udp.h index e2bcfd75a30d..16574ea18f0c 100644 --- a/include/uapi/linux/udp.h +++ b/include/uapi/linux/udp.h @@ -29,6 +29,8 @@ struct udphdr { /* UDP socket options */ #define UDP_CORK 1 /* Never send partially complete segments */ #define UDP_ENCAP 100 /* Set the socket to accept encapsulated packets */ +#define UDP_NO_CHECK6_TX 101 /* Disable sending checksum for UDP6X */ +#define UDP_NO_CHECK6_RX 102 /* Disable accpeting checksum for UDP6 */ /* UDP encapsulation types */ #define UDP_ENCAP_ESPINUDP_NON_IKE 1 /* draft-ietf-ipsec-nat-t-ike-00/01 */ |