3 files changed, 0 insertions, 144 deletions
diff --git a/include/linux/platform_data/dma-atmel.h b/include/linux/platform_data/dma-atmel.h
deleted file mode 100644
index 069637e6004f..000000000000
--- a/include/linux/platform_data/dma-atmel.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Header file for the Atmel AHB DMA Controller driver
- *
- * Copyright (C) 2008 Atmel Corporation
- */
-#ifndef AT_HDMAC_H
-#define AT_HDMAC_H
-
-#include <linux/dmaengine.h>
-
-/**
- * struct at_dma_platform_data - Controller configuration parameters
- * @nr_channels: Number of channels supported by hardware (max 8)
- * @cap_mask: dma_capability flags supported by the platform
- */
-struct at_dma_platform_data {
-	unsigned int	nr_channels;
-	dma_cap_mask_t  cap_mask;
-};
-
-/**
- * struct at_dma_slave - Controller-specific information about a slave
- * @dma_dev: required DMA master device
- * @cfg: Platform-specific initializer for the CFG register
- */
-struct at_dma_slave {
-	struct device		*dma_dev;
-	u32			cfg;
-};
-
-
-/* Platform-configurable bits in CFG */
-#define ATC_PER_MSB(h)	((0x30U & (h)) >> 4)	/* Extract most significant bits of a handshaking identifier */
-
-#define	ATC_SRC_PER(h)		(0xFU & (h))	/* Channel src rq associated with periph handshaking ifc h */
-#define	ATC_DST_PER(h)		((0xFU & (h)) <<  4)	/* Channel dst rq associated with periph handshaking ifc h */
-#define	ATC_SRC_REP		(0x1 <<  8)	/* Source Replay Mod */
-#define	ATC_SRC_H2SEL		(0x1 <<  9)	/* Source Handshaking Mod */
-#define		ATC_SRC_H2SEL_SW	(0x0 <<  9)
-#define		ATC_SRC_H2SEL_HW	(0x1 <<  9)
-#define	ATC_SRC_PER_MSB(h)	(ATC_PER_MSB(h) << 10)	/* Channel src rq (most significant bits) */
-#define	ATC_DST_REP		(0x1 << 12)	/* Destination Replay Mod */
-#define	ATC_DST_H2SEL		(0x1 << 13)	/* Destination Handshaking Mod */
-#define		ATC_DST_H2SEL_SW	(0x0 << 13)
-#define		ATC_DST_H2SEL_HW	(0x1 << 13)
-#define	ATC_DST_PER_MSB(h)	(ATC_PER_MSB(h) << 14)	/* Channel dst rq (most significant bits) */
-#define	ATC_SOD			(0x1 << 16)	/* Stop On Done */
-#define	ATC_LOCK_IF		(0x1 << 20)	/* Interface Lock */
-#define	ATC_LOCK_B		(0x1 << 21)	/* AHB Bus Lock */
-#define	ATC_LOCK_IF_L		(0x1 << 22)	/* Master Interface Arbiter Lock */
-#define		ATC_LOCK_IF_L_CHUNK	(0x0 << 22)
-#define		ATC_LOCK_IF_L_BUFFER	(0x1 << 22)
-#define	ATC_AHB_PROT_MASK	(0x7 << 24)	/* AHB Protection */
-#define	ATC_FIFOCFG_MASK	(0x3 << 28)	/* FIFO Request Configuration */
-#define		ATC_FIFOCFG_LARGESTBURST	(0x0 << 28)
-#define		ATC_FIFOCFG_HALFFIFO		(0x1 << 28)
-#define		ATC_FIFOCFG_ENOUGHSPACE		(0x2 << 28)
-
-
-#endif /* AT_HDMAC_H */
diff --git a/include/linux/platform_data/dma-coh901318.h b/include/linux/platform_data/dma-coh901318.h
deleted file mode 100644
index 4cca529f8d56..000000000000
--- a/include/linux/platform_data/dma-coh901318.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Platform data for the COH901318 DMA controller
- * Copyright (C) 2007-2013 ST-Ericsson
- */
-
-#ifndef PLAT_COH901318_H
-#define PLAT_COH901318_H
-
-#ifdef CONFIG_COH901318
-
-/* We only support the U300 DMA channels */
-#define U300_DMA_MSL_TX_0		0
-#define U300_DMA_MSL_TX_1		1
-#define U300_DMA_MSL_TX_2		2
-#define U300_DMA_MSL_TX_3		3
-#define U300_DMA_MSL_TX_4		4
-#define U300_DMA_MSL_TX_5		5
-#define U300_DMA_MSL_TX_6		6
-#define U300_DMA_MSL_RX_0		7
-#define U300_DMA_MSL_RX_1		8
-#define U300_DMA_MSL_RX_2		9
-#define U300_DMA_MSL_RX_3		10
-#define U300_DMA_MSL_RX_4		11
-#define U300_DMA_MSL_RX_5		12
-#define U300_DMA_MSL_RX_6		13
-#define U300_DMA_MMCSD_RX_TX		14
-#define U300_DMA_MSPRO_TX		15
-#define U300_DMA_MSPRO_RX		16
-#define U300_DMA_UART0_TX		17
-#define U300_DMA_UART0_RX		18
-#define U300_DMA_APEX_TX		19
-#define U300_DMA_APEX_RX		20
-#define U300_DMA_PCM_I2S0_TX		21
-#define U300_DMA_PCM_I2S0_RX		22
-#define U300_DMA_PCM_I2S1_TX		23
-#define U300_DMA_PCM_I2S1_RX		24
-#define U300_DMA_XGAM_CDI		25
-#define U300_DMA_XGAM_PDI		26
-#define U300_DMA_SPI_TX			27
-#define U300_DMA_SPI_RX			28
-#define U300_DMA_GENERAL_PURPOSE_0	29
-#define U300_DMA_GENERAL_PURPOSE_1	30
-#define U300_DMA_GENERAL_PURPOSE_2	31
-#define U300_DMA_GENERAL_PURPOSE_3	32
-#define U300_DMA_GENERAL_PURPOSE_4	33
-#define U300_DMA_GENERAL_PURPOSE_5	34
-#define U300_DMA_GENERAL_PURPOSE_6	35
-#define U300_DMA_GENERAL_PURPOSE_7	36
-#define U300_DMA_GENERAL_PURPOSE_8	37
-#define U300_DMA_UART1_TX		38
-#define U300_DMA_UART1_RX		39
-
-#define U300_DMA_DEVICE_CHANNELS	32
-#define U300_DMA_CHANNELS		40
-
-/**
- * coh901318_filter_id() - DMA channel filter function
- * @chan: dma channel handle
- * @chan_id: id of dma channel to be filter out
- *
- * In dma_request_channel() it specifies what channel id to be requested
- */
-bool coh901318_filter_id(struct dma_chan *chan, void *chan_id);
-#else
-static inline bool coh901318_filter_id(struct dma_chan *chan, void *chan_id)
-{
-	return false;
-}
-#endif
-
-#endif /* PLAT_COH901318_H */
diff --git a/include/linux/platform_data/dma-imx-sdma.h b/include/linux/platform_data/dma-imx-sdma.h
index 30e676b36b24..725602d9df91 100644
--- a/include/linux/platform_data/dma-imx-sdma.h
+++ b/include/linux/platform_data/dma-imx-sdma.h
@@ -57,15 +57,4 @@ struct sdma_script_start_addrs {
 	/* End of v4 array */
 };
 
-/**
- * struct sdma_platform_data - platform specific data for SDMA engine
- *
- * @fw_name		The firmware name
- * @script_addrs	SDMA scripts addresses in SDMA ROM
- */
-struct sdma_platform_data {
-	char *fw_name;
-	struct sdma_script_start_addrs *script_addrs;
-};
-
 #endif /* __MACH_MXC_SDMA_H__ */