summaryrefslogtreecommitdiff
path: root/include/linux/mfd
diff options
context:
space:
mode:
Diffstat (limited to 'include/linux/mfd')
-rw-r--r--include/linux/mfd/88pm80x.h1
-rw-r--r--include/linux/mfd/arizona/pdata.h6
-rw-r--r--include/linux/mfd/arizona/registers.h84
-rw-r--r--include/linux/mfd/axp20x.h24
-rw-r--r--include/linux/mfd/core.h10
-rw-r--r--include/linux/mfd/cros_ec.h1
-rw-r--r--include/linux/mfd/da9052/reg.h3
-rw-r--r--include/linux/mfd/da9150/core.h19
-rw-r--r--include/linux/mfd/intel_bxtwc.h69
-rw-r--r--include/linux/mfd/intel_soc_pmic.h2
-rw-r--r--include/linux/mfd/rtsx_pci.h6
-rw-r--r--include/linux/mfd/samsung/core.h4
-rw-r--r--include/linux/mfd/samsung/s2mps11.h1
-rw-r--r--include/linux/mfd/samsung/s2mps13.h1
-rw-r--r--include/linux/mfd/syscon/imx7-iomuxc-gpr.h47
-rw-r--r--include/linux/mfd/tps6105x.h10
16 files changed, 275 insertions, 13 deletions
diff --git a/include/linux/mfd/88pm80x.h b/include/linux/mfd/88pm80x.h
index 8fcad63fab55..d409ceb2231e 100644
--- a/include/linux/mfd/88pm80x.h
+++ b/include/linux/mfd/88pm80x.h
@@ -21,6 +21,7 @@ enum {
CHIP_INVALID = 0,
CHIP_PM800,
CHIP_PM805,
+ CHIP_PM860,
CHIP_MAX,
};
diff --git a/include/linux/mfd/arizona/pdata.h b/include/linux/mfd/arizona/pdata.h
index 1dc385850ba2..57b45caaea80 100644
--- a/include/linux/mfd/arizona/pdata.h
+++ b/include/linux/mfd/arizona/pdata.h
@@ -124,6 +124,9 @@ struct arizona_pdata {
/** Channel to use for headphone detection */
unsigned int hpdet_channel;
+ /** Use software comparison to determine mic presence */
+ bool micd_software_compare;
+
/** Extra debounce timeout used during initial mic detection (ms) */
unsigned int micd_detect_debounce;
@@ -181,6 +184,9 @@ struct arizona_pdata {
/** GPIO for primary IRQ (used for edge triggered emulation) */
int irq_gpio;
+
+ /** General purpose switch control */
+ unsigned int gpsw;
};
#endif
diff --git a/include/linux/mfd/arizona/registers.h b/include/linux/mfd/arizona/registers.h
index fdd70b3c7418..cd7e78eae006 100644
--- a/include/linux/mfd/arizona/registers.h
+++ b/include/linux/mfd/arizona/registers.h
@@ -242,6 +242,7 @@
#define ARIZONA_HP1_SHORT_CIRCUIT_CTRL 0x4A0
#define ARIZONA_HP2_SHORT_CIRCUIT_CTRL 0x4A1
#define ARIZONA_HP3_SHORT_CIRCUIT_CTRL 0x4A2
+#define ARIZONA_HP_TEST_CTRL_1 0x4A4
#define ARIZONA_SPK_CTRL_2 0x4B5
#define ARIZONA_SPK_CTRL_3 0x4B6
#define ARIZONA_DAC_COMP_1 0x4DC
@@ -1064,6 +1065,16 @@
#define ARIZONA_CLOCK_CONTROL 0xF00
#define ARIZONA_ANC_SRC 0xF01
#define ARIZONA_DSP_STATUS 0xF02
+#define ARIZONA_ANC_COEFF_START 0xF08
+#define ARIZONA_ANC_COEFF_END 0xF12
+#define ARIZONA_FCL_FILTER_CONTROL 0xF15
+#define ARIZONA_FCL_ADC_REFORMATTER_CONTROL 0xF17
+#define ARIZONA_FCL_COEFF_START 0xF18
+#define ARIZONA_FCL_COEFF_END 0xF69
+#define ARIZONA_FCR_FILTER_CONTROL 0xF70
+#define ARIZONA_FCR_ADC_REFORMATTER_CONTROL 0xF72
+#define ARIZONA_FCR_COEFF_START 0xF73
+#define ARIZONA_FCR_COEFF_END 0xFC4
#define ARIZONA_DSP1_CONTROL_1 0x1100
#define ARIZONA_DSP1_CLOCKING_1 0x1101
#define ARIZONA_DSP1_STATUS_1 0x1104
@@ -2359,9 +2370,9 @@
#define ARIZONA_ACCDET_SRC_MASK 0x2000 /* ACCDET_SRC */
#define ARIZONA_ACCDET_SRC_SHIFT 13 /* ACCDET_SRC */
#define ARIZONA_ACCDET_SRC_WIDTH 1 /* ACCDET_SRC */
-#define ARIZONA_ACCDET_MODE_MASK 0x0003 /* ACCDET_MODE - [1:0] */
-#define ARIZONA_ACCDET_MODE_SHIFT 0 /* ACCDET_MODE - [1:0] */
-#define ARIZONA_ACCDET_MODE_WIDTH 2 /* ACCDET_MODE - [1:0] */
+#define ARIZONA_ACCDET_MODE_MASK 0x0007 /* ACCDET_MODE - [2:0] */
+#define ARIZONA_ACCDET_MODE_SHIFT 0 /* ACCDET_MODE - [2:0] */
+#define ARIZONA_ACCDET_MODE_WIDTH 3 /* ACCDET_MODE - [2:0] */
/*
* R667 (0x29B) - Headphone Detect 1
@@ -3702,6 +3713,13 @@
#define ARIZONA_HP3_SC_ENA_WIDTH 1 /* HP3_SC_ENA */
/*
+ * R1188 (0x4A4) HP Test Ctrl 1
+ */
+#define ARIZONA_HP1_TST_CAP_SEL_MASK 0x0003 /* HP1_TST_CAP_SEL - [1:0] */
+#define ARIZONA_HP1_TST_CAP_SEL_SHIFT 0 /* HP1_TST_CAP_SEL - [1:0] */
+#define ARIZONA_HP1_TST_CAP_SEL_WIDTH 2 /* HP1_TST_CAP_SEL - [1:0] */
+
+/*
* R1244 (0x4DC) - DAC comp 1
*/
#define ARIZONA_OUT_COMP_COEFF_MASK 0xFFFF /* OUT_COMP_COEFF - [15:0] */
@@ -8043,6 +8061,66 @@
#define ARIZONA_ISRC3_NOTCH_ENA_WIDTH 1 /* ISRC3_NOTCH_ENA */
/*
+ * R3840 (0xF00) - Clock Control
+ */
+#define ARIZONA_EXT_NG_SEL_CLR 0x0080 /* EXT_NG_SEL_CLR */
+#define ARIZONA_EXT_NG_SEL_CLR_MASK 0x0080 /* EXT_NG_SEL_CLR */
+#define ARIZONA_EXT_NG_SEL_CLR_SHIFT 7 /* EXT_NG_SEL_CLR */
+#define ARIZONA_EXT_NG_SEL_CLR_WIDTH 1 /* EXT_NG_SEL_CLR */
+#define ARIZONA_EXT_NG_SEL_SET 0x0040 /* EXT_NG_SEL_SET */
+#define ARIZONA_EXT_NG_SEL_SET_MASK 0x0040 /* EXT_NG_SEL_SET */
+#define ARIZONA_EXT_NG_SEL_SET_SHIFT 6 /* EXT_NG_SEL_SET */
+#define ARIZONA_EXT_NG_SEL_SET_WIDTH 1 /* EXT_NG_SEL_SET */
+#define ARIZONA_CLK_R_ENA_CLR 0x0020 /* CLK_R_ENA_CLR */
+#define ARIZONA_CLK_R_ENA_CLR_MASK 0x0020 /* CLK_R_ENA_CLR */
+#define ARIZONA_CLK_R_ENA_CLR_SHIFT 5 /* CLK_R_ENA_CLR */
+#define ARIZONA_CLK_R_ENA_CLR_WIDTH 1 /* CLK_R_ENA_CLR */
+#define ARIZONA_CLK_R_ENA_SET 0x0010 /* CLK_R_ENA_SET */
+#define ARIZONA_CLK_R_ENA_SET_MASK 0x0010 /* CLK_R_ENA_SET */
+#define ARIZONA_CLK_R_ENA_SET_SHIFT 4 /* CLK_R_ENA_SET */
+#define ARIZONA_CLK_R_ENA_SET_WIDTH 1 /* CLK_R_ENA_SET */
+#define ARIZONA_CLK_NG_ENA_CLR 0x0008 /* CLK_NG_ENA_CLR */
+#define ARIZONA_CLK_NG_ENA_CLR_MASK 0x0008 /* CLK_NG_ENA_CLR */
+#define ARIZONA_CLK_NG_ENA_CLR_SHIFT 3 /* CLK_NG_ENA_CLR */
+#define ARIZONA_CLK_NG_ENA_CLR_WIDTH 1 /* CLK_NG_ENA_CLR */
+#define ARIZONA_CLK_NG_ENA_SET 0x0004 /* CLK_NG_ENA_SET */
+#define ARIZONA_CLK_NG_ENA_SET_MASK 0x0004 /* CLK_NG_ENA_SET */
+#define ARIZONA_CLK_NG_ENA_SET_SHIFT 2 /* CLK_NG_ENA_SET */
+#define ARIZONA_CLK_NG_ENA_SET_WIDTH 1 /* CLK_NG_ENA_SET */
+#define ARIZONA_CLK_L_ENA_CLR 0x0002 /* CLK_L_ENA_CLR */
+#define ARIZONA_CLK_L_ENA_CLR_MASK 0x0002 /* CLK_L_ENA_CLR */
+#define ARIZONA_CLK_L_ENA_CLR_SHIFT 1 /* CLK_L_ENA_CLR */
+#define ARIZONA_CLK_L_ENA_CLR_WIDTH 1 /* CLK_L_ENA_CLR */
+#define ARIZONA_CLK_L_ENA_SET 0x0001 /* CLK_L_ENA_SET */
+#define ARIZONA_CLK_L_ENA_SET_MASK 0x0001 /* CLK_L_ENA_SET */
+#define ARIZONA_CLK_L_ENA_SET_SHIFT 0 /* CLK_L_ENA_SET */
+#define ARIZONA_CLK_L_ENA_SET_WIDTH 1 /* CLK_L_ENA_SET */
+
+/*
+ * R3841 (0xF01) - ANC SRC
+ */
+#define ARIZONA_IN_RXANCR_SEL_MASK 0x0070 /* IN_RXANCR_SEL - [4:6] */
+#define ARIZONA_IN_RXANCR_SEL_SHIFT 4 /* IN_RXANCR_SEL - [4:6] */
+#define ARIZONA_IN_RXANCR_SEL_WIDTH 3 /* IN_RXANCR_SEL - [4:6] */
+#define ARIZONA_IN_RXANCL_SEL_MASK 0x0007 /* IN_RXANCL_SEL - [0:2] */
+#define ARIZONA_IN_RXANCL_SEL_SHIFT 0 /* IN_RXANCL_SEL - [0:2] */
+#define ARIZONA_IN_RXANCL_SEL_WIDTH 3 /* IN_RXANCL_SEL - [0:2] */
+
+/*
+ * R3863 (0xF17) - FCL ADC Reformatter Control
+ */
+#define ARIZONA_FCL_MIC_MODE_SEL 0x000C /* FCL_MIC_MODE_SEL - [2:3] */
+#define ARIZONA_FCL_MIC_MODE_SEL_SHIFT 2 /* FCL_MIC_MODE_SEL - [2:3] */
+#define ARIZONA_FCL_MIC_MODE_SEL_WIDTH 2 /* FCL_MIC_MODE_SEL - [2:3] */
+
+/*
+ * R3954 (0xF72) - FCR ADC Reformatter Control
+ */
+#define ARIZONA_FCR_MIC_MODE_SEL 0x000C /* FCR_MIC_MODE_SEL - [2:3] */
+#define ARIZONA_FCR_MIC_MODE_SEL_SHIFT 2 /* FCR_MIC_MODE_SEL - [2:3] */
+#define ARIZONA_FCR_MIC_MODE_SEL_WIDTH 2 /* FCR_MIC_MODE_SEL - [2:3] */
+
+/*
* R4352 (0x1100) - DSP1 Control 1
*/
#define ARIZONA_DSP1_RATE_MASK 0x7800 /* DSP1_RATE - [14:11] */
diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h
index cc8ad1e1a307..b24c771cebd5 100644
--- a/include/linux/mfd/axp20x.h
+++ b/include/linux/mfd/axp20x.h
@@ -11,6 +11,8 @@
#ifndef __LINUX_MFD_AXP20X_H
#define __LINUX_MFD_AXP20X_H
+#include <linux/regmap.h>
+
enum {
AXP152_ID = 0,
AXP202_ID,
@@ -438,4 +440,26 @@ struct axp288_extcon_pdata {
struct gpio_desc *gpio_mux_cntl;
};
+/* generic helper function for reading 9-16 bit wide regs */
+static inline int axp20x_read_variable_width(struct regmap *regmap,
+ unsigned int reg, unsigned int width)
+{
+ unsigned int reg_val, result;
+ int err;
+
+ err = regmap_read(regmap, reg, &reg_val);
+ if (err)
+ return err;
+
+ result = reg_val << (width - 8);
+
+ err = regmap_read(regmap, reg + 1, &reg_val);
+ if (err)
+ return err;
+
+ result |= reg_val;
+
+ return result;
+}
+
#endif /* __LINUX_MFD_AXP20X_H */
diff --git a/include/linux/mfd/core.h b/include/linux/mfd/core.h
index a76bc100bf97..27dac3ff18b9 100644
--- a/include/linux/mfd/core.h
+++ b/include/linux/mfd/core.h
@@ -18,6 +18,12 @@
struct irq_domain;
+/* Matches ACPI PNP id, either _HID or _CID, or ACPI _ADR */
+struct mfd_cell_acpi_match {
+ const char *pnpid;
+ const unsigned long long adr;
+};
+
/*
* This struct describes the MFD part ("cell").
* After registration the copy of this structure will become the platform data
@@ -44,8 +50,8 @@ struct mfd_cell {
*/
const char *of_compatible;
- /* Matches ACPI PNP id, either _HID or _CID */
- const char *acpi_pnpid;
+ /* Matches ACPI */
+ const struct mfd_cell_acpi_match *acpi_match;
/*
* These resources can be specified relative to the parent device.
diff --git a/include/linux/mfd/cros_ec.h b/include/linux/mfd/cros_ec.h
index da72671a42fa..494682ce4bf3 100644
--- a/include/linux/mfd/cros_ec.h
+++ b/include/linux/mfd/cros_ec.h
@@ -255,5 +255,6 @@ int cros_ec_query_all(struct cros_ec_device *ec_dev);
/* sysfs stuff */
extern struct attribute_group cros_ec_attr_group;
extern struct attribute_group cros_ec_lightbar_attr_group;
+extern struct attribute_group cros_ec_vbc_attr_group;
#endif /* __LINUX_MFD_CROS_EC_H */
diff --git a/include/linux/mfd/da9052/reg.h b/include/linux/mfd/da9052/reg.h
index c4dd3a8add21..5010f978725c 100644
--- a/include/linux/mfd/da9052/reg.h
+++ b/include/linux/mfd/da9052/reg.h
@@ -65,6 +65,9 @@
#define DA9052_GPIO_2_3_REG 22
#define DA9052_GPIO_4_5_REG 23
#define DA9052_GPIO_6_7_REG 24
+#define DA9052_GPIO_8_9_REG 25
+#define DA9052_GPIO_10_11_REG 26
+#define DA9052_GPIO_12_13_REG 27
#define DA9052_GPIO_14_15_REG 28
/* POWER SEQUENCER CONTROL REGISTERS */
diff --git a/include/linux/mfd/da9150/core.h b/include/linux/mfd/da9150/core.h
index 76e668933a77..1bf50caeb9fa 100644
--- a/include/linux/mfd/da9150/core.h
+++ b/include/linux/mfd/da9150/core.h
@@ -15,6 +15,7 @@
#define __DA9150_CORE_H
#include <linux/device.h>
+#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/regmap.h>
@@ -46,23 +47,39 @@
#define DA9150_IRQ_GPADC 19
#define DA9150_IRQ_WKUP 20
+/* I2C sub-device address */
+#define DA9150_QIF_I2C_ADDR_LSB 0x5
+
+struct da9150_fg_pdata {
+ u32 update_interval; /* msecs */
+ u8 warn_soc_lvl; /* % value */
+ u8 crit_soc_lvl; /* % value */
+};
+
struct da9150_pdata {
int irq_base;
+ struct da9150_fg_pdata *fg_pdata;
};
struct da9150 {
struct device *dev;
struct regmap *regmap;
+ struct i2c_client *core_qif;
+
struct regmap_irq_chip_data *regmap_irq_data;
int irq;
int irq_base;
};
-/* Device I/O */
+/* Device I/O - Query Interface for FG and standard register access */
+void da9150_read_qif(struct da9150 *da9150, u8 addr, int count, u8 *buf);
+void da9150_write_qif(struct da9150 *da9150, u8 addr, int count, const u8 *buf);
+
u8 da9150_reg_read(struct da9150 *da9150, u16 reg);
void da9150_reg_write(struct da9150 *da9150, u16 reg, u8 val);
void da9150_set_bits(struct da9150 *da9150, u16 reg, u8 mask, u8 val);
void da9150_bulk_read(struct da9150 *da9150, u16 reg, int count, u8 *buf);
void da9150_bulk_write(struct da9150 *da9150, u16 reg, int count, const u8 *buf);
+
#endif /* __DA9150_CORE_H */
diff --git a/include/linux/mfd/intel_bxtwc.h b/include/linux/mfd/intel_bxtwc.h
new file mode 100644
index 000000000000..1a0ee9d6efe9
--- /dev/null
+++ b/include/linux/mfd/intel_bxtwc.h
@@ -0,0 +1,69 @@
+/*
+ * intel_bxtwc.h - Header file for Intel Broxton Whiskey Cove PMIC
+ *
+ * Copyright (C) 2015 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/mfd/intel_soc_pmic.h>
+
+#ifndef __INTEL_BXTWC_H__
+#define __INTEL_BXTWC_H__
+
+/* BXT WC devices */
+#define BXTWC_DEVICE1_ADDR 0x4E
+#define BXTWC_DEVICE2_ADDR 0x4F
+#define BXTWC_DEVICE3_ADDR 0x5E
+
+/* device1 Registers */
+#define BXTWC_CHIPID 0x4E00
+#define BXTWC_CHIPVER 0x4E01
+
+#define BXTWC_SCHGRIRQ0_ADDR 0x5E1A
+#define BXTWC_CHGRCTRL0_ADDR 0x5E16
+#define BXTWC_CHGRCTRL1_ADDR 0x5E17
+#define BXTWC_CHGRCTRL2_ADDR 0x5E18
+#define BXTWC_CHGRSTATUS_ADDR 0x5E19
+#define BXTWC_THRMBATZONE_ADDR 0x4F22
+
+#define BXTWC_USBPATH_ADDR 0x5E19
+#define BXTWC_USBPHYCTRL_ADDR 0x5E07
+#define BXTWC_USBIDCTRL_ADDR 0x5E05
+#define BXTWC_USBIDEN_MASK 0x01
+#define BXTWC_USBIDSTAT_ADDR 0x00FF
+#define BXTWC_USBSRCDETSTATUS_ADDR 0x5E29
+
+#define BXTWC_DBGUSBBC1_ADDR 0x5FE0
+#define BXTWC_DBGUSBBC2_ADDR 0x5FE1
+#define BXTWC_DBGUSBBCSTAT_ADDR 0x5FE2
+
+#define BXTWC_WAKESRC_ADDR 0x4E22
+#define BXTWC_WAKESRC2_ADDR 0x4EE5
+#define BXTWC_CHRTTADDR_ADDR 0x5E22
+#define BXTWC_CHRTTDATA_ADDR 0x5E23
+
+#define BXTWC_STHRMIRQ0_ADDR 0x4F19
+#define WC_MTHRMIRQ1_ADDR 0x4E12
+#define WC_STHRMIRQ1_ADDR 0x4F1A
+#define WC_STHRMIRQ2_ADDR 0x4F1B
+
+#define BXTWC_THRMZN0H_ADDR 0x4F44
+#define BXTWC_THRMZN0L_ADDR 0x4F45
+#define BXTWC_THRMZN1H_ADDR 0x4F46
+#define BXTWC_THRMZN1L_ADDR 0x4F47
+#define BXTWC_THRMZN2H_ADDR 0x4F48
+#define BXTWC_THRMZN2L_ADDR 0x4F49
+#define BXTWC_THRMZN3H_ADDR 0x4F4A
+#define BXTWC_THRMZN3L_ADDR 0x4F4B
+#define BXTWC_THRMZN4H_ADDR 0x4F4C
+#define BXTWC_THRMZN4L_ADDR 0x4F4D
+
+#endif
diff --git a/include/linux/mfd/intel_soc_pmic.h b/include/linux/mfd/intel_soc_pmic.h
index abcbfcf32d10..cf619dbeace2 100644
--- a/include/linux/mfd/intel_soc_pmic.h
+++ b/include/linux/mfd/intel_soc_pmic.h
@@ -25,6 +25,8 @@ struct intel_soc_pmic {
int irq;
struct regmap *regmap;
struct regmap_irq_chip_data *irq_chip_data;
+ struct regmap_irq_chip_data *irq_chip_data_level2;
+ struct device *dev;
};
#endif /* __INTEL_SOC_PMIC_H__ */
diff --git a/include/linux/mfd/rtsx_pci.h b/include/linux/mfd/rtsx_pci.h
index ff843e7ca23d..7eb7cbac0a9a 100644
--- a/include/linux/mfd/rtsx_pci.h
+++ b/include/linux/mfd/rtsx_pci.h
@@ -589,6 +589,7 @@
#define FORCE_ASPM_NO_ASPM 0x00
#define PM_CLK_FORCE_CTL 0xFE58
#define FUNC_FORCE_CTL 0xFE59
+#define FUNC_FORCE_UPME_XMT_DBG 0x02
#define PERST_GLITCH_WIDTH 0xFE5C
#define CHANGE_LINK_STATE 0xFE5B
#define RESET_LOAD_REG 0xFE5E
@@ -712,6 +713,7 @@
#define PHY_RCR1 0x02
#define PHY_RCR1_ADP_TIME_4 0x0400
#define PHY_RCR1_VCO_COARSE 0x001F
+#define PHY_RCR1_INIT_27S 0x0A1F
#define PHY_SSCCR2 0x02
#define PHY_SSCCR2_PLL_NCODE 0x0A00
#define PHY_SSCCR2_TIME0 0x001C
@@ -724,6 +726,7 @@
#define PHY_RCR2_FREQSEL_12 0x0040
#define PHY_RCR2_CDR_SC_12P 0x0010
#define PHY_RCR2_CALIB_LATE 0x0002
+#define PHY_RCR2_INIT_27S 0xC152
#define PHY_SSCCR3 0x03
#define PHY_SSCCR3_STEP_IN 0x2740
#define PHY_SSCCR3_CHECK_DELAY 0x0008
@@ -800,12 +803,14 @@
#define PHY_ANA1A_RXT_BIST 0x0500
#define PHY_ANA1A_TXR_BIST 0x0040
#define PHY_ANA1A_REV 0x0006
+#define PHY_FLD0_INIT_27S 0x2546
#define PHY_FLD1 0x1B
#define PHY_FLD2 0x1C
#define PHY_FLD3 0x1D
#define PHY_FLD3_TIMER_4 0x0800
#define PHY_FLD3_TIMER_6 0x0020
#define PHY_FLD3_RXDELINK 0x0004
+#define PHY_FLD3_INIT_27S 0x0004
#define PHY_ANA1D 0x1D
#define PHY_ANA1D_DEBUG_ADDR 0x0004
#define _PHY_FLD0 0x1D
@@ -824,6 +829,7 @@
#define PHY_FLD4_BER_COUNT 0x00E0
#define PHY_FLD4_BER_TIMER 0x000A
#define PHY_FLD4_BER_CHK_EN 0x0001
+#define PHY_FLD4_INIT_27S 0x5C7F
#define PHY_DIG1E 0x1E
#define PHY_DIG1E_REV 0x4000
#define PHY_DIG1E_D0_X_D1 0x1000
diff --git a/include/linux/mfd/samsung/core.h b/include/linux/mfd/samsung/core.h
index 75115384f3fc..a06098639399 100644
--- a/include/linux/mfd/samsung/core.h
+++ b/include/linux/mfd/samsung/core.h
@@ -132,6 +132,10 @@ struct sec_platform_data {
int buck2_init;
int buck3_init;
int buck4_init;
+ /* Whether or not manually set PWRHOLD to low during shutdown. */
+ bool manual_poweroff;
+ /* Disable the WRSTBI (buck voltage warm reset) when probing? */
+ bool disable_wrstbi;
};
/**
diff --git a/include/linux/mfd/samsung/s2mps11.h b/include/linux/mfd/samsung/s2mps11.h
index 7981a9d77d3f..b288965e8101 100644
--- a/include/linux/mfd/samsung/s2mps11.h
+++ b/include/linux/mfd/samsung/s2mps11.h
@@ -179,6 +179,7 @@ enum s2mps11_regulators {
#define S2MPS11_BUCK_N_VOLTAGES (S2MPS11_BUCK_VSEL_MASK + 1)
#define S2MPS11_RAMP_DELAY 25000 /* uV/us */
+#define S2MPS11_CTRL1_PWRHOLD_MASK BIT(4)
#define S2MPS11_BUCK2_RAMP_SHIFT 6
#define S2MPS11_BUCK34_RAMP_SHIFT 4
diff --git a/include/linux/mfd/samsung/s2mps13.h b/include/linux/mfd/samsung/s2mps13.h
index b1fd675fa36f..239e977ba45d 100644
--- a/include/linux/mfd/samsung/s2mps13.h
+++ b/include/linux/mfd/samsung/s2mps13.h
@@ -184,5 +184,6 @@ enum s2mps13_regulators {
* Let's assume that default value will be set.
*/
#define S2MPS13_BUCK_RAMP_DELAY 12500
+#define S2MPS13_REG_WRSTBI_MASK BIT(5)
#endif /* __LINUX_MFD_S2MPS13_H */
diff --git a/include/linux/mfd/syscon/imx7-iomuxc-gpr.h b/include/linux/mfd/syscon/imx7-iomuxc-gpr.h
new file mode 100644
index 000000000000..4585d6105d68
--- /dev/null
+++ b/include/linux/mfd/syscon/imx7-iomuxc-gpr.h
@@ -0,0 +1,47 @@
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_IMX7_IOMUXC_GPR_H
+#define __LINUX_IMX7_IOMUXC_GPR_H
+
+#define IOMUXC_GPR0 0x00
+#define IOMUXC_GPR1 0x04
+#define IOMUXC_GPR2 0x08
+#define IOMUXC_GPR3 0x0c
+#define IOMUXC_GPR4 0x10
+#define IOMUXC_GPR5 0x14
+#define IOMUXC_GPR6 0x18
+#define IOMUXC_GPR7 0x1c
+#define IOMUXC_GPR8 0x20
+#define IOMUXC_GPR9 0x24
+#define IOMUXC_GPR10 0x28
+#define IOMUXC_GPR11 0x2c
+#define IOMUXC_GPR12 0x30
+#define IOMUXC_GPR13 0x34
+#define IOMUXC_GPR14 0x38
+#define IOMUXC_GPR15 0x3c
+#define IOMUXC_GPR16 0x40
+#define IOMUXC_GPR17 0x44
+#define IOMUXC_GPR18 0x48
+#define IOMUXC_GPR19 0x4c
+#define IOMUXC_GPR20 0x50
+#define IOMUXC_GPR21 0x54
+#define IOMUXC_GPR22 0x58
+
+/* For imx7d iomux gpr register field define */
+#define IMX7D_GPR1_IRQ_MASK (0x1 << 12)
+#define IMX7D_GPR1_ENET1_TX_CLK_SEL_MASK (0x1 << 13)
+#define IMX7D_GPR1_ENET2_TX_CLK_SEL_MASK (0x1 << 14)
+#define IMX7D_GPR1_ENET_TX_CLK_SEL_MASK (0x3 << 13)
+#define IMX7D_GPR1_ENET1_CLK_DIR_MASK (0x1 << 17)
+#define IMX7D_GPR1_ENET2_CLK_DIR_MASK (0x1 << 18)
+#define IMX7D_GPR1_ENET_CLK_DIR_MASK (0x3 << 17)
+
+#define IMX7D_GPR5_CSI_MUX_CONTROL_MIPI (0x1 << 4)
+
+#endif /* __LINUX_IMX7_IOMUXC_GPR_H */
diff --git a/include/linux/mfd/tps6105x.h b/include/linux/mfd/tps6105x.h
index 386743dd931c..8bc51180800a 100644
--- a/include/linux/mfd/tps6105x.h
+++ b/include/linux/mfd/tps6105x.h
@@ -10,6 +10,7 @@
#define MFD_TPS6105X_H
#include <linux/i2c.h>
+#include <linux/regmap.h>
#include <linux/regulator/machine.h>
/*
@@ -82,20 +83,15 @@ struct tps6105x_platform_data {
/**
* struct tps6105x - state holder for the TPS6105x drivers
- * @mutex: mutex to serialize I2C accesses
* @i2c_client: corresponding I2C client
* @regulator: regulator device if used in voltage mode
+ * @regmap: used for i2c communcation on accessing registers
*/
struct tps6105x {
struct tps6105x_platform_data *pdata;
- struct mutex lock;
struct i2c_client *client;
struct regulator_dev *regulator;
+ struct regmap *regmap;
};
-extern int tps6105x_set(struct tps6105x *tps6105x, u8 reg, u8 value);
-extern int tps6105x_get(struct tps6105x *tps6105x, u8 reg, u8 *buf);
-extern int tps6105x_mask_and_set(struct tps6105x *tps6105x, u8 reg,
- u8 bitmask, u8 bitvalues);
-
#endif
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-21 14:52:05 +0000