diff options
Diffstat (limited to 'include/linux/ieee80211.h')
| -rw-r--r-- | include/linux/ieee80211.h | 188 |
1 files changed, 146 insertions, 42 deletions
diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 2385119f8bb0..f0859cc73861 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -131,6 +131,8 @@ #define IEEE80211_MAX_MESH_ID_LEN 32 +#define IEEE80211_NUM_TIDS 16 + #define IEEE80211_QOS_CTL_LEN 2 /* 1d tag mask */ #define IEEE80211_QOS_CTL_TAG1D_MASK 0x0007 @@ -666,6 +668,21 @@ struct ieee80211_meshconf_ie { } __attribute__ ((packed)); /** + * enum mesh_config_capab_flags - Mesh Configuration IE capability field flags + * + * @IEEE80211_MESHCONF_CAPAB_ACCEPT_PLINKS: STA is willing to establish + * additional mesh peerings with other mesh STAs + * @IEEE80211_MESHCONF_CAPAB_FORWARDING: the STA forwards MSDUs + * @IEEE80211_MESHCONF_CAPAB_TBTT_ADJUSTING: TBTT adjustment procedure + * is ongoing + */ +enum mesh_config_capab_flags { + IEEE80211_MESHCONF_CAPAB_ACCEPT_PLINKS = 0x01, + IEEE80211_MESHCONF_CAPAB_FORWARDING = 0x08, + IEEE80211_MESHCONF_CAPAB_TBTT_ADJUSTING = 0x20, +}; + +/** * struct ieee80211_rann_ie * * This structure refers to "Root Announcement information element" @@ -905,6 +922,38 @@ struct ieee80211_tdls_data { } u; } __packed; +/* + * Peer-to-Peer IE attribute related definitions. + */ +/** + * enum ieee80211_p2p_attr_id - identifies type of peer-to-peer attribute. + */ +enum ieee80211_p2p_attr_id { + IEEE80211_P2P_ATTR_STATUS = 0, + IEEE80211_P2P_ATTR_MINOR_REASON, + IEEE80211_P2P_ATTR_CAPABILITY, + IEEE80211_P2P_ATTR_DEVICE_ID, + IEEE80211_P2P_ATTR_GO_INTENT, + IEEE80211_P2P_ATTR_GO_CONFIG_TIMEOUT, + IEEE80211_P2P_ATTR_LISTEN_CHANNEL, + IEEE80211_P2P_ATTR_GROUP_BSSID, + IEEE80211_P2P_ATTR_EXT_LISTEN_TIMING, + IEEE80211_P2P_ATTR_INTENDED_IFACE_ADDR, + IEEE80211_P2P_ATTR_MANAGABILITY, + IEEE80211_P2P_ATTR_CHANNEL_LIST, + IEEE80211_P2P_ATTR_ABSENCE_NOTICE, + IEEE80211_P2P_ATTR_DEVICE_INFO, + IEEE80211_P2P_ATTR_GROUP_INFO, + IEEE80211_P2P_ATTR_GROUP_ID, + IEEE80211_P2P_ATTR_INTERFACE, + IEEE80211_P2P_ATTR_OPER_CHANNEL, + IEEE80211_P2P_ATTR_INVITE_FLAGS, + /* 19 - 220: Reserved */ + IEEE80211_P2P_ATTR_VENDOR_SPECIFIC = 221, + + IEEE80211_P2P_ATTR_MAX +}; + /** * struct ieee80211_bar - HT Block Ack Request * @@ -1107,20 +1156,6 @@ struct ieee80211_ht_operation { #define WLAN_HT_SMPS_CONTROL_STATIC 1 #define WLAN_HT_SMPS_CONTROL_DYNAMIC 3 -#define VHT_MCS_SUPPORTED_SET_SIZE 8 - -struct ieee80211_vht_capabilities { - __le32 vht_capabilities_info; - u8 vht_supported_mcs_set[VHT_MCS_SUPPORTED_SET_SIZE]; -} __packed; - -struct ieee80211_vht_operation { - u8 vht_op_info_chwidth; - u8 vht_op_info_chan_center_freq_seg1_idx; - u8 vht_op_info_chan_center_freq_seg2_idx; - __le16 vht_basic_mcs_set; -} __packed; - /** * struct ieee80211_vht_mcs_info - VHT MCS information * @rx_mcs_map: RX MCS map 2 bits for each stream, total 8 streams @@ -1128,11 +1163,13 @@ struct ieee80211_vht_operation { * STA can receive. Rate expressed in units of 1 Mbps. * If this field is 0 this value should not be used to * consider the highest RX data rate supported. + * The top 3 bits of this field are reserved. * @tx_mcs_map: TX MCS map 2 bits for each stream, total 8 streams * @tx_highest: Indicates highest long GI VHT PPDU data rate * STA can transmit. Rate expressed in units of 1 Mbps. * If this field is 0 this value should not be used to * consider the highest TX data rate supported. + * The top 3 bits of this field are reserved. */ struct ieee80211_vht_mcs_info { __le16 rx_mcs_map; @@ -1141,38 +1178,107 @@ struct ieee80211_vht_mcs_info { __le16 tx_highest; } __packed; +/** + * enum ieee80211_vht_mcs_support - VHT MCS support definitions + * @IEEE80211_VHT_MCS_SUPPORT_0_7: MCSes 0-7 are supported for the + * number of streams + * @IEEE80211_VHT_MCS_SUPPORT_0_8: MCSes 0-8 are supported + * @IEEE80211_VHT_MCS_SUPPORT_0_9: MCSes 0-9 are supported + * @IEEE80211_VHT_MCS_NOT_SUPPORTED: This number of streams isn't supported + * + * These definitions are used in each 2-bit subfield of the @rx_mcs_map + * and @tx_mcs_map fields of &struct ieee80211_vht_mcs_info, which are + * both split into 8 subfields by number of streams. These values indicate + * which MCSes are supported for the number of streams the value appears + * for. + */ +enum ieee80211_vht_mcs_support { + IEEE80211_VHT_MCS_SUPPORT_0_7 = 0, + IEEE80211_VHT_MCS_SUPPORT_0_8 = 1, + IEEE80211_VHT_MCS_SUPPORT_0_9 = 2, + IEEE80211_VHT_MCS_NOT_SUPPORTED = 3, +}; + +/** + * struct ieee80211_vht_cap - VHT capabilities + * + * This structure is the "VHT capabilities element" as + * described in 802.11ac D3.0 8.4.2.160 + * @vht_cap_info: VHT capability info + * @supp_mcs: VHT MCS supported rates + */ +struct ieee80211_vht_cap { + __le32 vht_cap_info; + struct ieee80211_vht_mcs_info supp_mcs; +} __packed; + +/** + * enum ieee80211_vht_chanwidth - VHT channel width + * @IEEE80211_VHT_CHANWIDTH_USE_HT: use the HT operation IE to + * determine the channel width (20 or 40 MHz) + * @IEEE80211_VHT_CHANWIDTH_80MHZ: 80 MHz bandwidth + * @IEEE80211_VHT_CHANWIDTH_160MHZ: 160 MHz bandwidth + * @IEEE80211_VHT_CHANWIDTH_80P80MHZ: 80+80 MHz bandwidth + */ +enum ieee80211_vht_chanwidth { + IEEE80211_VHT_CHANWIDTH_USE_HT = 0, + IEEE80211_VHT_CHANWIDTH_80MHZ = 1, + IEEE80211_VHT_CHANWIDTH_160MHZ = 2, + IEEE80211_VHT_CHANWIDTH_80P80MHZ = 3, +}; + +/** + * struct ieee80211_vht_operation - VHT operation IE + * + * This structure is the "VHT operation element" as + * described in 802.11ac D3.0 8.4.2.161 + * @chan_width: Operating channel width + * @center_freq_seg1_idx: center freq segment 1 index + * @center_freq_seg2_idx: center freq segment 2 index + * @basic_mcs_set: VHT Basic MCS rate set + */ +struct ieee80211_vht_operation { + u8 chan_width; + u8 center_freq_seg1_idx; + u8 center_freq_seg2_idx; + __le16 basic_mcs_set; +} __packed; + + #define IEEE80211_VHT_MCS_ZERO_TO_SEVEN_SUPPORT 0 #define IEEE80211_VHT_MCS_ZERO_TO_EIGHT_SUPPORT 1 #define IEEE80211_VHT_MCS_ZERO_TO_NINE_SUPPORT 2 #define IEEE80211_VHT_MCS_NOT_SUPPORTED 3 /* 802.11ac VHT Capabilities */ -#define IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_3895 0x00000000 -#define IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_7991 0x00000001 -#define IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_11454 0x00000002 -#define IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ 0x00000004 -#define IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ 0x00000008 -#define IEEE80211_VHT_CAP_RXLDPC 0x00000010 -#define IEEE80211_VHT_CAP_SHORT_GI_80 0x00000020 -#define IEEE80211_VHT_CAP_SHORT_GI_160 0x00000040 -#define IEEE80211_VHT_CAP_TXSTBC 0x00000080 -#define IEEE80211_VHT_CAP_RXSTBC_1 0x00000100 -#define IEEE80211_VHT_CAP_RXSTBC_2 0x00000200 -#define IEEE80211_VHT_CAP_RXSTBC_3 0x00000300 -#define IEEE80211_VHT_CAP_RXSTBC_4 0x00000400 -#define IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE 0x00000800 -#define IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE 0x00001000 -#define IEEE80211_VHT_CAP_BEAMFORMER_ANTENNAS_MAX 0x00006000 -#define IEEE80211_VHT_CAP_SOUNDING_DIMENTION_MAX 0x00030000 -#define IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE 0x00080000 -#define IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE 0x00100000 -#define IEEE80211_VHT_CAP_VHT_TXOP_PS 0x00200000 -#define IEEE80211_VHT_CAP_HTC_VHT 0x00400000 -#define IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT 0x00800000 -#define IEEE80211_VHT_CAP_VHT_LINK_ADAPTATION_VHT_UNSOL_MFB 0x08000000 -#define IEEE80211_VHT_CAP_VHT_LINK_ADAPTATION_VHT_MRQ_MFB 0x0c000000 -#define IEEE80211_VHT_CAP_RX_ANTENNA_PATTERN 0x10000000 -#define IEEE80211_VHT_CAP_TX_ANTENNA_PATTERN 0x20000000 +#define IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_3895 0x00000000 +#define IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_7991 0x00000001 +#define IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_11454 0x00000002 +#define IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ 0x00000004 +#define IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ 0x00000008 +#define IEEE80211_VHT_CAP_RXLDPC 0x00000010 +#define IEEE80211_VHT_CAP_SHORT_GI_80 0x00000020 +#define IEEE80211_VHT_CAP_SHORT_GI_160 0x00000040 +#define IEEE80211_VHT_CAP_TXSTBC 0x00000080 +#define IEEE80211_VHT_CAP_RXSTBC_1 0x00000100 +#define IEEE80211_VHT_CAP_RXSTBC_2 0x00000200 +#define IEEE80211_VHT_CAP_RXSTBC_3 0x00000300 +#define IEEE80211_VHT_CAP_RXSTBC_4 0x00000400 +#define IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE 0x00000800 +#define IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE 0x00001000 +#define IEEE80211_VHT_CAP_BEAMFORMER_ANTENNAS_MAX 0x00006000 +#define IEEE80211_VHT_CAP_SOUNDING_DIMENTION_MAX 0x00030000 +#define IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE 0x00080000 +#define IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE 0x00100000 +#define IEEE80211_VHT_CAP_VHT_TXOP_PS 0x00200000 +#define IEEE80211_VHT_CAP_HTC_VHT 0x00400000 +#define IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_SHIFT 23 +#define IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK \ + (7 << IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_SHIFT) +#define IEEE80211_VHT_CAP_VHT_LINK_ADAPTATION_VHT_UNSOL_MFB 0x08000000 +#define IEEE80211_VHT_CAP_VHT_LINK_ADAPTATION_VHT_MRQ_MFB 0x0c000000 +#define IEEE80211_VHT_CAP_RX_ANTENNA_PATTERN 0x10000000 +#define IEEE80211_VHT_CAP_TX_ANTENNA_PATTERN 0x20000000 /* Authentication algorithms */ #define WLAN_AUTH_OPEN 0 @@ -1440,8 +1546,6 @@ enum ieee80211_eid { WLAN_EID_RSN = 48, WLAN_EID_MMIE = 76, - WLAN_EID_WPA = 221, - WLAN_EID_GENERIC = 221, WLAN_EID_VENDOR_SPECIFIC = 221, WLAN_EID_QOS_PARAMETER = 222, |