3 files changed, 36 insertions, 0 deletions
diff --git a/include/asm-powerpc/commproc.h b/include/asm-powerpc/commproc.h
index 5dec32404fa2..0307c84a5c1d 100644
--- a/include/asm-powerpc/commproc.h
+++ b/include/asm-powerpc/commproc.h
@@ -19,6 +19,7 @@
 
 #include <asm/8xx_immap.h>
 #include <asm/ptrace.h>
+#include <asm/cpm.h>
 
 /* CPM Command register.
 */
@@ -54,6 +55,7 @@
 
 #define mk_cr_cmd(CH, CMD)	((CMD << 8) | (CH << 4))
 
+#ifndef CONFIG_PPC_CPM_NEW_BINDING
 /* The dual ported RAM is multi-functional.  Some areas can be (and are
  * being) used for microcode.  There is an area that can only be used
  * as data ram for buffer descriptors, which is all we use right now.
@@ -62,17 +64,27 @@
 #define CPM_DATAONLY_BASE	((uint)0x0800)
 #define CPM_DATAONLY_SIZE	((uint)0x0700)
 #define CPM_DP_NOSPACE		((uint)0x7fffffff)
+#endif
 
 /* Export the base address of the communication processor registers
  * and dual port ram.
  */
 extern cpm8xx_t __iomem *cpmp; /* Pointer to comm processor */
+
+#ifdef CONFIG_PPC_CPM_NEW_BINDING
+#define cpm_dpalloc cpm_muram_alloc
+#define cpm_dpfree cpm_muram_free
+#define cpm_dpram_addr cpm_muram_addr
+#define cpm_dpram_phys cpm_muram_dma
+#else
 extern unsigned long cpm_dpalloc(uint size, uint align);
 extern int cpm_dpfree(unsigned long offset);
 extern unsigned long cpm_dpalloc_fixed(unsigned long offset, uint size, uint align);
 extern void cpm_dpdump(void);
 extern void *cpm_dpram_addr(unsigned long offset);
 extern uint cpm_dpram_phys(u8* addr);
+#endif
+
 extern void cpm_setbrg(uint brg, uint rate);
 
 extern uint m8xx_cpm_hostalloc(uint size);
diff --git a/include/asm-powerpc/cpm.h b/include/asm-powerpc/cpm.h
new file mode 100644
index 000000000000..48df9f330e76
--- /dev/null
+++ b/include/asm-powerpc/cpm.h
@@ -0,0 +1,14 @@
+#ifndef __CPM_H
+#define __CPM_H
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+int cpm_muram_init(void);
+unsigned long cpm_muram_alloc(unsigned long size, unsigned long align);
+int cpm_muram_free(unsigned long offset);
+unsigned long cpm_muram_alloc_fixed(unsigned long offset, unsigned long size);
+void __iomem *cpm_muram_addr(unsigned long offset);
+dma_addr_t cpm_muram_dma(void __iomem *addr);
+
+#endif
diff --git a/include/asm-powerpc/cpm2.h b/include/asm-powerpc/cpm2.h
index d7b57ac55892..e698b1d09dcf 100644
--- a/include/asm-powerpc/cpm2.h
+++ b/include/asm-powerpc/cpm2.h
@@ -11,6 +11,7 @@
 #define __CPM2__
 
 #include <asm/immap_cpm2.h>
+#include <asm/cpm.h>
 
 /* CPM Command register.
 */
@@ -82,6 +83,7 @@
 #define mk_cr_cmd(PG, SBC, MCN, OP) \
 	((PG << 26) | (SBC << 21) | (MCN << 6) | OP)
 
+#ifndef CONFIG_PPC_CPM_NEW_BINDING
 /* Dual Port RAM addresses.  The first 16K is available for almost
  * any CPM use, so we put the BDs there.  The first 128 bytes are
  * used for SMC1 and SMC2 parameter RAM, so we start allocating
@@ -97,6 +99,7 @@
 #define CPM_DATAONLY_SIZE	((uint)(16 * 1024) - CPM_DATAONLY_BASE)
 #define CPM_FCC_SPECIAL_BASE	((uint)0x0000b000)
 #endif
+#endif
 
 /* The number of pages of host memory we allocate for CPM.  This is
  * done early in kernel initialization to get physically contiguous
@@ -109,11 +112,18 @@
  */
 extern cpm_cpm2_t __iomem *cpmp; /* Pointer to comm processor */
 
+#ifdef CONFIG_PPC_CPM_NEW_BINDING
+#define cpm_dpalloc cpm_muram_alloc
+#define cpm_dpfree cpm_muram_free
+#define cpm_dpram_addr cpm_muram_addr
+#else
 extern unsigned long cpm_dpalloc(uint size, uint align);
 extern int cpm_dpfree(unsigned long offset);
 extern unsigned long cpm_dpalloc_fixed(unsigned long offset, uint size, uint align);
 extern void cpm_dpdump(void);
 extern void *cpm_dpram_addr(unsigned long offset);
+#endif
+
 extern void cpm_setbrg(uint brg, uint rate);
 extern void cpm2_fastbrg(uint brg, uint rate, int div16);
 extern void cpm2_reset(void);