diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/net/wireless/ti/wl18xx/main.c | 36 | ||||
| -rw-r--r-- | drivers/net/wireless/ti/wl18xx/reg.h | 15 |
2 files changed, 49 insertions, 2 deletions
diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c index 9fa692d11025..ae85ae46c61b 100644 --- a/drivers/net/wireless/ti/wl18xx/main.c +++ b/drivers/net/wireless/ti/wl18xx/main.c @@ -594,8 +594,8 @@ static const struct wlcore_partition_set wl18xx_ptable[PART_TABLE_LEN] = { .mem3 = { .start = 0x00000000, .size = 0x00000000 }, }, [PART_PHY_INIT] = { - .mem = { .start = 0x80926000, - .size = sizeof(struct wl18xx_mac_and_phy_params) }, + .mem = { .start = WL18XX_PHY_INIT_MEM_ADDR, + .size = WL18XX_PHY_INIT_MEM_SIZE }, .reg = { .start = 0x00000000, .size = 0x00000000 }, .mem2 = { .start = 0x00000000, .size = 0x00000000 }, .mem3 = { .start = 0x00000000, .size = 0x00000000 }, @@ -799,6 +799,9 @@ static int wl18xx_pre_upload(struct wl1271 *wl) u32 tmp; int ret; + BUILD_BUG_ON(sizeof(struct wl18xx_mac_and_phy_params) > + WL18XX_PHY_INIT_MEM_SIZE); + ret = wlcore_set_partition(wl, &wl->ptable[PART_BOOT]); if (ret < 0) goto out; @@ -815,6 +818,35 @@ static int wl18xx_pre_upload(struct wl1271 *wl) wl1271_debug(DEBUG_BOOT, "chip id 0x%x", tmp); ret = wlcore_read32(wl, WL18XX_SCR_PAD2, &tmp); + if (ret < 0) + goto out; + + /* + * Workaround for FDSP code RAM corruption (needed for PG2.1 + * and newer; for older chips it's a NOP). Change FDSP clock + * settings so that it's muxed to the ATGP clock instead of + * its own clock. + */ + + ret = wlcore_set_partition(wl, &wl->ptable[PART_PHY_INIT]); + if (ret < 0) + goto out; + + /* disable FDSP clock */ + ret = wlcore_write32(wl, WL18XX_PHY_FPGA_SPARE_1, + MEM_FDSP_CLK_120_DISABLE); + if (ret < 0) + goto out; + + /* set ATPG clock toward FDSP Code RAM rather than its own clock */ + ret = wlcore_write32(wl, WL18XX_PHY_FPGA_SPARE_1, + MEM_FDSP_CODERAM_FUNC_CLK_SEL); + if (ret < 0) + goto out; + + /* re-enable FDSP clock */ + ret = wlcore_write32(wl, WL18XX_PHY_FPGA_SPARE_1, + MEM_FDSP_CLK_120_ENABLE); out: return ret; diff --git a/drivers/net/wireless/ti/wl18xx/reg.h b/drivers/net/wireless/ti/wl18xx/reg.h index 6306e04cd258..05dd8bad2746 100644 --- a/drivers/net/wireless/ti/wl18xx/reg.h +++ b/drivers/net/wireless/ti/wl18xx/reg.h @@ -38,6 +38,9 @@ #define WL18XX_REG_BOOT_PART_SIZE 0x00014578 #define WL18XX_PHY_INIT_MEM_ADDR 0x80926000 +#define WL18XX_PHY_END_MEM_ADDR 0x8093CA44 +#define WL18XX_PHY_INIT_MEM_SIZE \ + (WL18XX_PHY_END_MEM_ADDR - WL18XX_PHY_INIT_MEM_ADDR) #define WL18XX_SDIO_WSPI_BASE (WL18XX_REGISTERS_BASE) #define WL18XX_REG_CONFIG_BASE (WL18XX_REGISTERS_BASE + 0x02000) @@ -217,4 +220,16 @@ static const char * const rdl_names[] = { [RDL_4_SP] = "1897 MIMO", }; +/* FPGA_SPARE_1 register - used to change the PHY ATPG clock at boot time */ +#define WL18XX_PHY_FPGA_SPARE_1 0x8093CA40 + +/* command to disable FDSP clock */ +#define MEM_FDSP_CLK_120_DISABLE 0x80000000 + +/* command to set ATPG clock toward FDSP Code RAM rather than its own clock */ +#define MEM_FDSP_CODERAM_FUNC_CLK_SEL 0xC0000000 + +/* command to re-enable FDSP clock */ +#define MEM_FDSP_CLK_120_ENABLE 0x40000000 + #endif /* __REG_H__ */ |