diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/mtd/ubi/Kconfig | 2 | ||||
-rw-r--r-- | drivers/mtd/ubi/build.c | 60 | ||||
-rw-r--r-- | drivers/mtd/ubi/io.c | 6 | ||||
-rw-r--r-- | drivers/mtd/ubi/kapi.c | 6 | ||||
-rw-r--r-- | drivers/mtd/ubi/scan.c | 4 | ||||
-rw-r--r-- | drivers/mtd/ubi/ubi.h | 2 | ||||
-rw-r--r-- | drivers/mtd/ubi/vtbl.c | 4 | ||||
-rw-r--r-- | drivers/mtd/ubi/wl.c | 2 |
8 files changed, 35 insertions, 51 deletions
diff --git a/drivers/mtd/ubi/Kconfig b/drivers/mtd/ubi/Kconfig index 0a8c7ea764ae..f702a163d8df 100644 --- a/drivers/mtd/ubi/Kconfig +++ b/drivers/mtd/ubi/Kconfig @@ -27,7 +27,7 @@ config MTD_UBI_WL_THRESHOLD The default value should be OK for SLC NAND flashes, NOR flashes and other flashes which have eraseblock life-cycle 100000 or more. However, in case of MLC NAND flashes which typically have eraseblock - life-cycle less then 10000, the threshold should be lessened (e.g., + life-cycle less than 10000, the threshold should be lessened (e.g., to 128 or 256, although it does not have to be power of 2). config MTD_UBI_BEB_RESERVE diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c index 55c726dde942..13b05cb33b08 100644 --- a/drivers/mtd/ubi/build.c +++ b/drivers/mtd/ubi/build.c @@ -42,7 +42,6 @@ #include <linux/miscdevice.h> #include <linux/log2.h> #include <linux/kthread.h> -#include <linux/reboot.h> #include <linux/kernel.h> #include <linux/slab.h> #include "ubi.h" @@ -50,6 +49,12 @@ /* Maximum length of the 'mtd=' parameter */ #define MTD_PARAM_LEN_MAX 64 +#ifdef CONFIG_MTD_UBI_MODULE +#define ubi_is_module() 1 +#else +#define ubi_is_module() 0 +#endif + /** * struct mtd_dev_param - MTD device parameter description data structure. * @name: MTD character device node path, MTD device name, or MTD device number @@ -832,34 +837,6 @@ static int autoresize(struct ubi_device *ubi, int vol_id) } /** - * ubi_reboot_notifier - halt UBI transactions immediately prior to a reboot. - * @n: reboot notifier object - * @state: SYS_RESTART, SYS_HALT, or SYS_POWER_OFF - * @cmd: pointer to command string for RESTART2 - * - * This function stops the UBI background thread so that the flash device - * remains quiescent when Linux restarts the system. Any queued work will be - * discarded, but this function will block until do_work() finishes if an - * operation is already in progress. - * - * This function solves a real-life problem observed on NOR flashes when an - * PEB erase operation starts, then the system is rebooted before the erase is - * finishes, and the boot loader gets confused and dies. So we prefer to finish - * the ongoing operation before rebooting. - */ -static int ubi_reboot_notifier(struct notifier_block *n, unsigned long state, - void *cmd) -{ - struct ubi_device *ubi; - - ubi = container_of(n, struct ubi_device, reboot_notifier); - if (ubi->bgt_thread) - kthread_stop(ubi->bgt_thread); - ubi_sync(ubi->ubi_num); - return NOTIFY_DONE; -} - -/** * ubi_attach_mtd_dev - attach an MTD device. * @mtd: MTD device description object * @ubi_num: number to assign to the new UBI device @@ -1016,11 +993,6 @@ int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num, int vid_hdr_offset) wake_up_process(ubi->bgt_thread); spin_unlock(&ubi->wl_lock); - /* Flash device priority is 0 - UBI needs to shut down first */ - ubi->reboot_notifier.priority = 1; - ubi->reboot_notifier.notifier_call = ubi_reboot_notifier; - register_reboot_notifier(&ubi->reboot_notifier); - ubi_devices[ubi_num] = ubi; ubi_notify_all(ubi, UBI_VOLUME_ADDED, NULL); return ubi_num; @@ -1091,7 +1063,6 @@ int ubi_detach_mtd_dev(int ubi_num, int anyway) * Before freeing anything, we have to stop the background thread to * prevent it from doing anything on this device while we are freeing. */ - unregister_reboot_notifier(&ubi->reboot_notifier); if (ubi->bgt_thread) kthread_stop(ubi->bgt_thread); @@ -1241,9 +1212,24 @@ static int __init ubi_init(void) p->vid_hdr_offs); mutex_unlock(&ubi_devices_mutex); if (err < 0) { - put_mtd_device(mtd); ubi_err("cannot attach mtd%d", mtd->index); - goto out_detach; + put_mtd_device(mtd); + + /* + * Originally UBI stopped initializing on any error. + * However, later on it was found out that this + * behavior is not very good when UBI is compiled into + * the kernel and the MTD devices to attach are passed + * through the command line. Indeed, UBI failure + * stopped whole boot sequence. + * + * To fix this, we changed the behavior for the + * non-module case, but preserved the old behavior for + * the module case, just for compatibility. This is a + * little inconsistent, though. + */ + if (ubi_is_module()) + goto out_detach; } } diff --git a/drivers/mtd/ubi/io.c b/drivers/mtd/ubi/io.c index 533b1a4b9af1..4b979e34b159 100644 --- a/drivers/mtd/ubi/io.c +++ b/drivers/mtd/ubi/io.c @@ -64,9 +64,9 @@ * device, e.g., make @ubi->min_io_size = 512 in the example above? * * A: because when writing a sub-page, MTD still writes a full 2K page but the - * bytes which are no relevant to the sub-page are 0xFF. So, basically, writing - * 4x512 sub-pages is 4 times slower then writing one 2KiB NAND page. Thus, we - * prefer to use sub-pages only for EV and VID headers. + * bytes which are not relevant to the sub-page are 0xFF. So, basically, + * writing 4x512 sub-pages is 4 times slower than writing one 2KiB NAND page. + * Thus, we prefer to use sub-pages only for EC and VID headers. * * As it was noted above, the VID header may start at a non-aligned offset. * For example, in case of a 2KiB page NAND flash with a 512 bytes sub-page, diff --git a/drivers/mtd/ubi/kapi.c b/drivers/mtd/ubi/kapi.c index 17f287decc36..69fa4ef03c53 100644 --- a/drivers/mtd/ubi/kapi.c +++ b/drivers/mtd/ubi/kapi.c @@ -488,7 +488,7 @@ EXPORT_SYMBOL_GPL(ubi_leb_write); * * This function changes the contents of a logical eraseblock atomically. @buf * has to contain new logical eraseblock data, and @len - the length of the - * data, which has to be aligned. The length may be shorter then the logical + * data, which has to be aligned. The length may be shorter than the logical * eraseblock size, ant the logical eraseblock may be appended to more times * later on. This function guarantees that in case of an unclean reboot the old * contents is preserved. Returns zero in case of success and a negative error @@ -571,7 +571,7 @@ EXPORT_SYMBOL_GPL(ubi_leb_erase); * * This function un-maps logical eraseblock @lnum and schedules the * corresponding physical eraseblock for erasure, so that it will eventually be - * physically erased in background. This operation is much faster then the + * physically erased in background. This operation is much faster than the * erase operation. * * Unlike erase, the un-map operation does not guarantee that the logical @@ -590,7 +590,7 @@ EXPORT_SYMBOL_GPL(ubi_leb_erase); * * The main and obvious use-case of this function is when the contents of a * logical eraseblock has to be re-written. Then it is much more efficient to - * first un-map it, then write new data, rather then first erase it, then write + * first un-map it, then write new data, rather than first erase it, then write * new data. Note, once new data has been written to the logical eraseblock, * UBI guarantees that the old contents has gone forever. In other words, if an * unclean reboot happens after the logical eraseblock has been un-mapped and diff --git a/drivers/mtd/ubi/scan.c b/drivers/mtd/ubi/scan.c index dc5f688699da..aed19f33b8f3 100644 --- a/drivers/mtd/ubi/scan.c +++ b/drivers/mtd/ubi/scan.c @@ -231,7 +231,7 @@ static struct ubi_scan_volume *add_volume(struct ubi_scan_info *si, int vol_id, * case of success this function returns a positive value, in case of failure, a * negative error code is returned. The success return codes use the following * bits: - * o bit 0 is cleared: the first PEB (described by @seb) is newer then the + * o bit 0 is cleared: the first PEB (described by @seb) is newer than the * second PEB (described by @pnum and @vid_hdr); * o bit 0 is set: the second PEB is newer; * o bit 1 is cleared: no bit-flips were detected in the newer LEB; @@ -452,7 +452,7 @@ int ubi_scan_add_used(struct ubi_device *ubi, struct ubi_scan_info *si, if (cmp_res & 1) { /* - * This logical eraseblock is newer then the one + * This logical eraseblock is newer than the one * found earlier. */ err = validate_vid_hdr(vid_hdr, sv, pnum); diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h index 5176d4886518..a637f0283add 100644 --- a/drivers/mtd/ubi/ubi.h +++ b/drivers/mtd/ubi/ubi.h @@ -350,7 +350,6 @@ struct ubi_wl_entry; * @bgt_thread: background thread description object * @thread_enabled: if the background thread is enabled * @bgt_name: background thread name - * @reboot_notifier: notifier to terminate background thread before rebooting * * @flash_size: underlying MTD device size (in bytes) * @peb_count: count of physical eraseblocks on the MTD device @@ -436,7 +435,6 @@ struct ubi_device { struct task_struct *bgt_thread; int thread_enabled; char bgt_name[sizeof(UBI_BGT_NAME_PATTERN)+2]; - struct notifier_block reboot_notifier; /* I/O sub-system's stuff */ long long flash_size; diff --git a/drivers/mtd/ubi/vtbl.c b/drivers/mtd/ubi/vtbl.c index cd90ff3b76b1..14c10bed94ee 100644 --- a/drivers/mtd/ubi/vtbl.c +++ b/drivers/mtd/ubi/vtbl.c @@ -414,7 +414,7 @@ static struct ubi_vtbl_record *process_lvol(struct ubi_device *ubi, * 0 contains more recent information. * * So the plan is to first check LEB 0. Then - * a. if LEB 0 is OK, it must be containing the most resent data; then + * a. if LEB 0 is OK, it must be containing the most recent data; then * we compare it with LEB 1, and if they are different, we copy LEB * 0 to LEB 1; * b. if LEB 0 is corrupted, but LEB 1 has to be OK, and we copy LEB 1 @@ -848,7 +848,7 @@ int ubi_read_volume_table(struct ubi_device *ubi, struct ubi_scan_info *si) goto out_free; /* - * Get sure that the scanning information is consistent to the + * Make sure that the scanning information is consistent to the * information stored in the volume table. */ err = check_scanning_info(ubi, si); diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c index f64ddabd4ac8..ee7b1d8fbb92 100644 --- a/drivers/mtd/ubi/wl.c +++ b/drivers/mtd/ubi/wl.c @@ -350,7 +350,7 @@ static void prot_queue_add(struct ubi_device *ubi, struct ubi_wl_entry *e) * @max: highest possible erase counter * * This function looks for a wear leveling entry with erase counter closest to - * @max and less then @max. + * @max and less than @max. */ static struct ubi_wl_entry *find_wl_entry(struct rb_root *root, int max) { |