diff options
Diffstat (limited to 'drivers')
4 files changed, 164 insertions, 1 deletions
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h index 7779036690cc..6797b1075874 100644 --- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h +++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h @@ -582,6 +582,19 @@ struct pch_gbe_hw_stats { }; /** + * struct pch_gbe_privdata - PCI Device ID driver data + * @phy_tx_clk_delay: Bool, configure the PHY TX delay in software + * @phy_disable_hibernate: Bool, disable PHY hibernation + * @platform_init: Platform initialization callback, called from + * probe, prior to PHY initialization. + */ +struct pch_gbe_privdata { + bool phy_tx_clk_delay; + bool phy_disable_hibernate; + int (*platform_init)(struct pci_dev *pdev); +}; + +/** * struct pch_gbe_adapter - board specific private data structure * @stats_lock: Spinlock structure for status * @ethtool_lock: Spinlock structure for ethtool @@ -604,6 +617,7 @@ struct pch_gbe_hw_stats { * @rx_buffer_len: Receive buffer length * @tx_queue_len: Transmit queue length * @have_msi: PCI MSI mode flag + * @pch_gbe_privdata: PCI Device ID driver_data */ struct pch_gbe_adapter { @@ -631,6 +645,7 @@ struct pch_gbe_adapter { int hwts_tx_en; int hwts_rx_en; struct pci_dev *ptp_pdev; + struct pch_gbe_privdata *pdata; }; #define pch_gbe_hw_to_adapter(hw) container_of(hw, struct pch_gbe_adapter, hw) diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c index ab1039a95bf9..e19f1be60d5e 100644 --- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c +++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c @@ -23,6 +23,7 @@ #include <linux/module.h> #include <linux/net_tstamp.h> #include <linux/ptp_classify.h> +#include <linux/gpio.h> #define DRV_VERSION "1.01" const char pch_driver_version[] = DRV_VERSION; @@ -111,6 +112,8 @@ const char pch_driver_version[] = DRV_VERSION; #define PTP_L4_MULTICAST_SA "01:00:5e:00:01:81" #define PTP_L2_MULTICAST_SA "01:1b:19:00:00:00" +#define MINNOW_PHY_RESET_GPIO 13 + static unsigned int copybreak __read_mostly = PCH_GBE_COPYBREAK_DEFAULT; static int pch_gbe_mdio_read(struct net_device *netdev, int addr, int reg); @@ -682,7 +685,7 @@ static int pch_gbe_init_phy(struct pch_gbe_adapter *adapter) } adapter->hw.phy.addr = adapter->mii.phy_id; netdev_dbg(netdev, "phy_addr = %d\n", adapter->mii.phy_id); - if (addr == 32) + if (addr == PCH_GBE_PHY_REGS_LEN) return -EAGAIN; /* Selected the phy and isolate the rest */ for (addr = 0; addr < PCH_GBE_PHY_REGS_LEN; addr++) { @@ -2635,6 +2638,9 @@ static int pch_gbe_probe(struct pci_dev *pdev, adapter->pdev = pdev; adapter->hw.back = adapter; adapter->hw.reg = pcim_iomap_table(pdev)[PCH_GBE_PCI_BAR]; + adapter->pdata = (struct pch_gbe_privdata *)pci_id->driver_data; + if (adapter->pdata && adapter->pdata->platform_init) + adapter->pdata->platform_init(pdev); adapter->ptp_pdev = pci_get_bus_and_slot(adapter->pdev->bus->number, PCI_DEVFN(12, 4)); @@ -2710,6 +2716,10 @@ static int pch_gbe_probe(struct pci_dev *pdev, dev_dbg(&pdev->dev, "PCH Network Connection\n"); + /* Disable hibernation on certain platforms */ + if (adapter->pdata && adapter->pdata->phy_disable_hibernate) + pch_gbe_phy_disable_hibernate(&adapter->hw); + device_set_wakeup_enable(&pdev->dev, 1); return 0; @@ -2720,9 +2730,48 @@ err_free_netdev: return ret; } +/* The AR803X PHY on the MinnowBoard requires a physical pin to be toggled to + * ensure it is awake for probe and init. Request the line and reset the PHY. + */ +static int pch_gbe_minnow_platform_init(struct pci_dev *pdev) +{ + unsigned long flags = GPIOF_DIR_OUT | GPIOF_INIT_HIGH | GPIOF_EXPORT; + unsigned gpio = MINNOW_PHY_RESET_GPIO; + int ret; + + ret = devm_gpio_request_one(&pdev->dev, gpio, flags, + "minnow_phy_reset"); + if (ret) { + dev_err(&pdev->dev, + "ERR: Can't request PHY reset GPIO line '%d'\n", gpio); + return ret; + } + + gpio_set_value(gpio, 0); + usleep_range(1250, 1500); + gpio_set_value(gpio, 1); + usleep_range(1250, 1500); + + return ret; +} + +static struct pch_gbe_privdata pch_gbe_minnow_privdata = { + .phy_tx_clk_delay = true, + .phy_disable_hibernate = true, + .platform_init = pch_gbe_minnow_platform_init, +}; + static DEFINE_PCI_DEVICE_TABLE(pch_gbe_pcidev_id) = { {.vendor = PCI_VENDOR_ID_INTEL, .device = PCI_DEVICE_ID_INTEL_IOH1_GBE, + .subvendor = PCI_VENDOR_ID_CIRCUITCO, + .subdevice = PCI_SUBSYSTEM_ID_CIRCUITCO_MINNOWBOARD, + .class = (PCI_CLASS_NETWORK_ETHERNET << 8), + .class_mask = (0xFFFF00), + .driver_data = (kernel_ulong_t)&pch_gbe_minnow_privdata + }, + {.vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_IOH1_GBE, .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, .class = (PCI_CLASS_NETWORK_ETHERNET << 8), diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.c index da079073a6c6..8b7ff75fc8e0 100644 --- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.c +++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.c @@ -74,6 +74,15 @@ #define MII_SR_100X_FD_CAPS 0x4000 /* 100X Full Duplex Capable */ #define MII_SR_100T4_CAPS 0x8000 /* 100T4 Capable */ +/* AR8031 PHY Debug Registers */ +#define PHY_AR803X_ID 0x00001374 +#define PHY_AR8031_DBG_OFF 0x1D +#define PHY_AR8031_DBG_DAT 0x1E +#define PHY_AR8031_SERDES 0x05 +#define PHY_AR8031_HIBERNATE 0x0B +#define PHY_AR8031_SERDES_TX_CLK_DLY 0x0100 /* TX clock delay of 2.0ns */ +#define PHY_AR8031_PS_HIB_EN 0x8000 /* Hibernate enable */ + /* Phy Id Register (word 2) */ #define PHY_REVISION_MASK 0x000F @@ -249,6 +258,51 @@ void pch_gbe_phy_set_rgmii(struct pch_gbe_hw *hw) } /** + * pch_gbe_phy_tx_clk_delay - Setup TX clock delay via the PHY + * @hw: Pointer to the HW structure + * Returns + * 0: Successful. + * -EINVAL: Invalid argument. + */ +static int pch_gbe_phy_tx_clk_delay(struct pch_gbe_hw *hw) +{ + /* The RGMII interface requires a ~2ns TX clock delay. This is typically + * done in layout with a longer trace or via PHY strapping, but can also + * be done via PHY configuration registers. + */ + struct pch_gbe_adapter *adapter = pch_gbe_hw_to_adapter(hw); + u16 mii_reg; + int ret = 0; + + switch (hw->phy.id) { + case PHY_AR803X_ID: + netdev_dbg(adapter->netdev, + "Configuring AR803X PHY for 2ns TX clock delay\n"); + pch_gbe_phy_read_reg_miic(hw, PHY_AR8031_DBG_OFF, &mii_reg); + ret = pch_gbe_phy_write_reg_miic(hw, PHY_AR8031_DBG_OFF, + PHY_AR8031_SERDES); + if (ret) + break; + + pch_gbe_phy_read_reg_miic(hw, PHY_AR8031_DBG_DAT, &mii_reg); + mii_reg |= PHY_AR8031_SERDES_TX_CLK_DLY; + ret = pch_gbe_phy_write_reg_miic(hw, PHY_AR8031_DBG_DAT, + mii_reg); + break; + default: + netdev_err(adapter->netdev, + "Unknown PHY (%x), could not set TX clock delay\n", + hw->phy.id); + return -EINVAL; + } + + if (ret) + netdev_err(adapter->netdev, + "Could not configure tx clock delay for PHY\n"); + return ret; +} + +/** * pch_gbe_phy_init_setting - PHY initial setting * @hw: Pointer to the HW structure */ @@ -277,4 +331,48 @@ void pch_gbe_phy_init_setting(struct pch_gbe_hw *hw) pch_gbe_phy_read_reg_miic(hw, PHY_PHYSP_CONTROL, &mii_reg); mii_reg |= PHYSP_CTRL_ASSERT_CRS_TX; pch_gbe_phy_write_reg_miic(hw, PHY_PHYSP_CONTROL, mii_reg); + + /* Setup a TX clock delay on certain platforms */ + if (adapter->pdata && adapter->pdata->phy_tx_clk_delay) + pch_gbe_phy_tx_clk_delay(hw); +} + +/** + * pch_gbe_phy_disable_hibernate - Disable the PHY low power state + * @hw: Pointer to the HW structure + * Returns + * 0: Successful. + * -EINVAL: Invalid argument. + */ +int pch_gbe_phy_disable_hibernate(struct pch_gbe_hw *hw) +{ + struct pch_gbe_adapter *adapter = pch_gbe_hw_to_adapter(hw); + u16 mii_reg; + int ret = 0; + + switch (hw->phy.id) { + case PHY_AR803X_ID: + netdev_dbg(adapter->netdev, + "Disabling hibernation for AR803X PHY\n"); + ret = pch_gbe_phy_write_reg_miic(hw, PHY_AR8031_DBG_OFF, + PHY_AR8031_HIBERNATE); + if (ret) + break; + + pch_gbe_phy_read_reg_miic(hw, PHY_AR8031_DBG_DAT, &mii_reg); + mii_reg &= ~PHY_AR8031_PS_HIB_EN; + ret = pch_gbe_phy_write_reg_miic(hw, PHY_AR8031_DBG_DAT, + mii_reg); + break; + default: + netdev_err(adapter->netdev, + "Unknown PHY (%x), could not disable hibernation\n", + hw->phy.id); + return -EINVAL; + } + + if (ret) + netdev_err(adapter->netdev, + "Could not disable PHY hibernation\n"); + return ret; } diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.h b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.h index 03264dc7b5ec..0cbe69206e04 100644 --- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.h +++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.h @@ -33,5 +33,6 @@ void pch_gbe_phy_power_up(struct pch_gbe_hw *hw); void pch_gbe_phy_power_down(struct pch_gbe_hw *hw); void pch_gbe_phy_set_rgmii(struct pch_gbe_hw *hw); void pch_gbe_phy_init_setting(struct pch_gbe_hw *hw); +int pch_gbe_phy_disable_hibernate(struct pch_gbe_hw *hw); #endif /* _PCH_GBE_PHY_H_ */ |