diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/block/smart1,2.h | 278 |
1 files changed, 0 insertions, 278 deletions
diff --git a/drivers/block/smart1,2.h b/drivers/block/smart1,2.h deleted file mode 100644 index e5565fbaeb30..000000000000 --- a/drivers/block/smart1,2.h +++ /dev/null @@ -1,278 +0,0 @@ -/* - * Disk Array driver for Compaq SMART2 Controllers - * Copyright 1998 Compaq Computer Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * Questions/Comments/Bugfixes to iss_storagedev@hp.com - * - * If you want to make changes, improve or add functionality to this - * driver, you'll probably need the Compaq Array Controller Interface - * Specificiation (Document number ECG086/1198) - */ - -/* - * This file contains the controller communication implementation for - * Compaq SMART-1 and SMART-2 controllers. To the best of my knowledge, - * this should support: - * - * PCI: - * SMART-2/P, SMART-2DH, SMART-2SL, SMART-221, SMART-3100ES, SMART-3200 - * Integerated SMART Array Controller, SMART-4200, SMART-4250ES - * - * EISA: - * SMART-2/E, SMART, IAES, IDA-2, IDA - */ - -/* - * Memory mapped FIFO interface (SMART 42xx cards) - */ -static void smart4_submit_command(ctlr_info_t *h, cmdlist_t *c) -{ - writel(c->busaddr, h->vaddr + S42XX_REQUEST_PORT_OFFSET); -} - -/* - * This card is the opposite of the other cards. - * 0 turns interrupts on... - * 0x08 turns them off... - */ -static void smart4_intr_mask(ctlr_info_t *h, unsigned long val) -{ - if (val) - { /* Turn interrupts on */ - writel(0, h->vaddr + S42XX_REPLY_INTR_MASK_OFFSET); - } else /* Turn them off */ - { - writel( S42XX_INTR_OFF, - h->vaddr + S42XX_REPLY_INTR_MASK_OFFSET); - } -} - -/* - * For older cards FIFO Full = 0. - * On this card 0 means there is room, anything else FIFO Full. - * - */ -static unsigned long smart4_fifo_full(ctlr_info_t *h) -{ - - return (!readl(h->vaddr + S42XX_REQUEST_PORT_OFFSET)); -} - -/* This type of controller returns -1 if the fifo is empty, - * Not 0 like the others. - * And we need to let it know we read a value out - */ -static unsigned long smart4_completed(ctlr_info_t *h) -{ - long register_value - = readl(h->vaddr + S42XX_REPLY_PORT_OFFSET); - - /* Fifo is empty */ - if( register_value == 0xffffffff) - return 0; - - /* Need to let it know we got the reply */ - /* We do this by writing a 0 to the port we just read from */ - writel(0, h->vaddr + S42XX_REPLY_PORT_OFFSET); - - return ((unsigned long) register_value); -} - - /* - * This hardware returns interrupt pending at a different place and - * it does not tell us if the fifo is empty, we will have check - * that by getting a 0 back from the command_completed call. - */ -static unsigned long smart4_intr_pending(ctlr_info_t *h) -{ - unsigned long register_value = - readl(h->vaddr + S42XX_INTR_STATUS); - - if( register_value & S42XX_INTR_PENDING) - return FIFO_NOT_EMPTY; - return 0 ; -} - -static struct access_method smart4_access = { - smart4_submit_command, - smart4_intr_mask, - smart4_fifo_full, - smart4_intr_pending, - smart4_completed, -}; - -/* - * Memory mapped FIFO interface (PCI SMART2 and SMART 3xxx cards) - */ -static void smart2_submit_command(ctlr_info_t *h, cmdlist_t *c) -{ - writel(c->busaddr, h->vaddr + COMMAND_FIFO); -} - -static void smart2_intr_mask(ctlr_info_t *h, unsigned long val) -{ - writel(val, h->vaddr + INTR_MASK); -} - -static unsigned long smart2_fifo_full(ctlr_info_t *h) -{ - return readl(h->vaddr + COMMAND_FIFO); -} - -static unsigned long smart2_completed(ctlr_info_t *h) -{ - return readl(h->vaddr + COMMAND_COMPLETE_FIFO); -} - -static unsigned long smart2_intr_pending(ctlr_info_t *h) -{ - return readl(h->vaddr + INTR_PENDING); -} - -static struct access_method smart2_access = { - smart2_submit_command, - smart2_intr_mask, - smart2_fifo_full, - smart2_intr_pending, - smart2_completed, -}; - -/* - * IO access for SMART-2/E cards - */ -static void smart2e_submit_command(ctlr_info_t *h, cmdlist_t *c) -{ - outl(c->busaddr, h->io_mem_addr + COMMAND_FIFO); -} - -static void smart2e_intr_mask(ctlr_info_t *h, unsigned long val) -{ - outl(val, h->io_mem_addr + INTR_MASK); -} - -static unsigned long smart2e_fifo_full(ctlr_info_t *h) -{ - return inl(h->io_mem_addr + COMMAND_FIFO); -} - -static unsigned long smart2e_completed(ctlr_info_t *h) -{ - return inl(h->io_mem_addr + COMMAND_COMPLETE_FIFO); -} - -static unsigned long smart2e_intr_pending(ctlr_info_t *h) -{ - return inl(h->io_mem_addr + INTR_PENDING); -} - -static struct access_method smart2e_access = { - smart2e_submit_command, - smart2e_intr_mask, - smart2e_fifo_full, - smart2e_intr_pending, - smart2e_completed, -}; - -/* - * IO access for older SMART-1 type cards - */ -#define SMART1_SYSTEM_MASK 0xC8E -#define SMART1_SYSTEM_DOORBELL 0xC8F -#define SMART1_LOCAL_MASK 0xC8C -#define SMART1_LOCAL_DOORBELL 0xC8D -#define SMART1_INTR_MASK 0xC89 -#define SMART1_LISTADDR 0xC90 -#define SMART1_LISTLEN 0xC94 -#define SMART1_TAG 0xC97 -#define SMART1_COMPLETE_ADDR 0xC98 -#define SMART1_LISTSTATUS 0xC9E - -#define CHANNEL_BUSY 0x01 -#define CHANNEL_CLEAR 0x02 - -static void smart1_submit_command(ctlr_info_t *h, cmdlist_t *c) -{ - /* - * This __u16 is actually a bunch of control flags on SMART - * and below. We want them all to be zero. - */ - c->hdr.size = 0; - - outb(CHANNEL_CLEAR, h->io_mem_addr + SMART1_SYSTEM_DOORBELL); - - outl(c->busaddr, h->io_mem_addr + SMART1_LISTADDR); - outw(c->size, h->io_mem_addr + SMART1_LISTLEN); - - outb(CHANNEL_BUSY, h->io_mem_addr + SMART1_LOCAL_DOORBELL); -} - -static void smart1_intr_mask(ctlr_info_t *h, unsigned long val) -{ - if (val == 1) { - outb(0xFD, h->io_mem_addr + SMART1_SYSTEM_DOORBELL); - outb(CHANNEL_BUSY, h->io_mem_addr + SMART1_LOCAL_DOORBELL); - outb(0x01, h->io_mem_addr + SMART1_INTR_MASK); - outb(0x01, h->io_mem_addr + SMART1_SYSTEM_MASK); - } else { - outb(0, h->io_mem_addr + 0xC8E); - } -} - -static unsigned long smart1_fifo_full(ctlr_info_t *h) -{ - unsigned char chan; - chan = inb(h->io_mem_addr + SMART1_SYSTEM_DOORBELL) & CHANNEL_CLEAR; - return chan; -} - -static unsigned long smart1_completed(ctlr_info_t *h) -{ - unsigned char status; - unsigned long cmd; - - if (inb(h->io_mem_addr + SMART1_SYSTEM_DOORBELL) & CHANNEL_BUSY) { - outb(CHANNEL_BUSY, h->io_mem_addr + SMART1_SYSTEM_DOORBELL); - - cmd = inl(h->io_mem_addr + SMART1_COMPLETE_ADDR); - status = inb(h->io_mem_addr + SMART1_LISTSTATUS); - - outb(CHANNEL_CLEAR, h->io_mem_addr + SMART1_LOCAL_DOORBELL); - - /* - * this is x86 (actually compaq x86) only, so it's ok - */ - if (cmd) ((cmdlist_t*)bus_to_virt(cmd))->req.hdr.rcode = status; - } else { - cmd = 0; - } - return cmd; -} - -static unsigned long smart1_intr_pending(ctlr_info_t *h) -{ - unsigned char chan; - chan = inb(h->io_mem_addr + SMART1_SYSTEM_DOORBELL) & CHANNEL_BUSY; - return chan; -} - -static struct access_method smart1_access = { - smart1_submit_command, - smart1_intr_mask, - smart1_fifo_full, - smart1_intr_pending, - smart1_completed, -}; |