diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/iio/accel/mma8452.c | 495 | ||||
-rw-r--r-- | drivers/iio/accel/st_accel.h | 1 | ||||
-rw-r--r-- | drivers/iio/accel/st_accel_core.c | 86 | ||||
-rw-r--r-- | drivers/iio/accel/st_accel_i2c.c | 4 | ||||
-rw-r--r-- | drivers/iio/adc/twl4030-madc.c | 8 | ||||
-rw-r--r-- | drivers/iio/adc/vf610_adc.c | 146 | ||||
-rw-r--r-- | drivers/iio/buffer_cb.c | 2 | ||||
-rw-r--r-- | drivers/iio/common/st_sensors/st_sensors_core.c | 4 | ||||
-rw-r--r-- | drivers/iio/industrialio-buffer.c | 60 | ||||
-rw-r--r-- | drivers/iio/kfifo_buf.c | 2 | ||||
-rw-r--r-- | drivers/iio/light/stk3310.c | 2 | ||||
-rw-r--r-- | drivers/iio/magnetometer/mmc35240.c | 115 | ||||
-rw-r--r-- | drivers/staging/iio/accel/sca3000_ring.c | 2 | ||||
-rw-r--r-- | drivers/staging/iio/iio_dummy_evgen.c | 4 | ||||
-rw-r--r-- | drivers/staging/iio/iio_dummy_evgen.h | 2 | ||||
-rw-r--r-- | drivers/staging/iio/iio_simple_dummy.c | 21 | ||||
-rw-r--r-- | drivers/staging/iio/iio_simple_dummy.h | 8 | ||||
-rw-r--r-- | drivers/staging/iio/iio_simple_dummy_events.c | 4 |
18 files changed, 848 insertions, 118 deletions
diff --git a/drivers/iio/accel/mma8452.c b/drivers/iio/accel/mma8452.c index 877ce2954196..e8e2077c7244 100644 --- a/drivers/iio/accel/mma8452.c +++ b/drivers/iio/accel/mma8452.c @@ -9,7 +9,7 @@ * * 7-bit I2C slave address 0x1c/0x1d (pin selectable) * - * TODO: interrupt, thresholding, orientation / freefall events, autosleep + * TODO: orientation / freefall events, autosleep */ #include <linux/module.h> @@ -18,21 +18,40 @@ #include <linux/iio/sysfs.h> #include <linux/iio/trigger_consumer.h> #include <linux/iio/buffer.h> +#include <linux/iio/trigger.h> +#include <linux/iio/trigger_consumer.h> #include <linux/iio/triggered_buffer.h> +#include <linux/iio/events.h> #include <linux/delay.h> #define MMA8452_STATUS 0x00 #define MMA8452_OUT_X 0x01 /* MSB first, 12-bit */ #define MMA8452_OUT_Y 0x03 #define MMA8452_OUT_Z 0x05 +#define MMA8452_INT_SRC 0x0c #define MMA8452_WHO_AM_I 0x0d #define MMA8452_DATA_CFG 0x0e +#define MMA8452_HP_FILTER_CUTOFF 0x0f +#define MMA8452_HP_FILTER_CUTOFF_SEL_MASK (BIT(0) | BIT(1)) +#define MMA8452_TRANSIENT_CFG 0x1d +#define MMA8452_TRANSIENT_CFG_ELE BIT(4) +#define MMA8452_TRANSIENT_CFG_CHAN(chan) BIT(chan + 1) +#define MMA8452_TRANSIENT_CFG_HPF_BYP BIT(0) +#define MMA8452_TRANSIENT_SRC 0x1e +#define MMA8452_TRANSIENT_SRC_XTRANSE BIT(1) +#define MMA8452_TRANSIENT_SRC_YTRANSE BIT(3) +#define MMA8452_TRANSIENT_SRC_ZTRANSE BIT(5) +#define MMA8452_TRANSIENT_THS 0x1f +#define MMA8452_TRANSIENT_THS_MASK 0x7f +#define MMA8452_TRANSIENT_COUNT 0x20 #define MMA8452_OFF_X 0x2f #define MMA8452_OFF_Y 0x30 #define MMA8452_OFF_Z 0x31 #define MMA8452_CTRL_REG1 0x2a #define MMA8452_CTRL_REG2 0x2b #define MMA8452_CTRL_REG2_RST BIT(6) +#define MMA8452_CTRL_REG4 0x2d +#define MMA8452_CTRL_REG5 0x2e #define MMA8452_MAX_REG 0x31 @@ -47,6 +66,10 @@ #define MMA8452_DATA_CFG_FS_2G 0 #define MMA8452_DATA_CFG_FS_4G 1 #define MMA8452_DATA_CFG_FS_8G 2 +#define MMA8452_DATA_CFG_HPF_MASK BIT(4) + +#define MMA8452_INT_DRDY BIT(0) +#define MMA8452_INT_TRANS BIT(5) #define MMA8452_DEVICE_ID 0x2a @@ -109,6 +132,12 @@ static int mma8452_get_int_plus_micros_index(const int (*vals)[2], int n, return -EINVAL; } +static int mma8452_get_odr_index(struct mma8452_data *data) +{ + return (data->ctrl_reg1 & MMA8452_CTRL_DR_MASK) >> + MMA8452_CTRL_DR_SHIFT; +} + static const int mma8452_samp_freq[8][2] = { {800, 0}, {400, 0}, {200, 0}, {100, 0}, {50, 0}, {12, 500000}, {6, 250000}, {1, 560000} @@ -124,6 +153,30 @@ static const int mma8452_scales[3][2] = { {0, 9577}, {0, 19154}, {0, 38307} }; +/* Datasheet table 35 (step time vs sample frequency) */ +static const int mma8452_transient_time_step_us[8] = { + 1250, + 2500, + 5000, + 10000, + 20000, + 20000, + 20000, + 20000 +}; + +/* Datasheet table 18 (normal mode) */ +static const int mma8452_hp_filter_cutoff[8][4][2] = { + { {16, 0}, {8, 0}, {4, 0}, {2, 0} }, /* 800 Hz sample */ + { {16, 0}, {8, 0}, {4, 0}, {2, 0} }, /* 400 Hz sample */ + { {8, 0}, {4, 0}, {2, 0}, {1, 0} }, /* 200 Hz sample */ + { {4, 0}, {2, 0}, {1, 0}, {0, 500000} }, /* 100 Hz sample */ + { {2, 0}, {1, 0}, {0, 500000}, {0, 250000} }, /* 50 Hz sample */ + { {2, 0}, {1, 0}, {0, 500000}, {0, 250000} }, /* 12.5 Hz sample */ + { {2, 0}, {1, 0}, {0, 500000}, {0, 250000} }, /* 6.25 Hz sample */ + { {2, 0}, {1, 0}, {0, 500000}, {0, 250000} } /* 1.56 Hz sample */ +}; + static ssize_t mma8452_show_samp_freq_avail(struct device *dev, struct device_attribute *attr, char *buf) { @@ -138,9 +191,23 @@ static ssize_t mma8452_show_scale_avail(struct device *dev, ARRAY_SIZE(mma8452_scales)); } +static ssize_t mma8452_show_hp_cutoff_avail(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct mma8452_data *data = iio_priv(indio_dev); + int i = mma8452_get_odr_index(data); + + return mma8452_show_int_plus_micros(buf, mma8452_hp_filter_cutoff[i], + ARRAY_SIZE(mma8452_hp_filter_cutoff[0])); +} + static IIO_DEV_ATTR_SAMP_FREQ_AVAIL(mma8452_show_samp_freq_avail); static IIO_DEVICE_ATTR(in_accel_scale_available, S_IRUGO, mma8452_show_scale_avail, NULL, 0); +static IIO_DEVICE_ATTR(in_accel_filter_high_pass_3db_frequency_available, + S_IRUGO, mma8452_show_hp_cutoff_avail, NULL, 0); static int mma8452_get_samp_freq_index(struct mma8452_data *data, int val, int val2) @@ -156,6 +223,31 @@ static int mma8452_get_scale_index(struct mma8452_data *data, ARRAY_SIZE(mma8452_scales), val, val2); } +static int mma8452_get_hp_filter_index(struct mma8452_data *data, + int val, int val2) +{ + int i = mma8452_get_odr_index(data); + + return mma8452_get_int_plus_micros_index(mma8452_hp_filter_cutoff[i], + ARRAY_SIZE(mma8452_scales[0]), val, val2); +} + +static int mma8452_read_hp_filter(struct mma8452_data *data, int *hz, int *uHz) +{ + int i, ret; + + ret = i2c_smbus_read_byte_data(data->client, MMA8452_HP_FILTER_CUTOFF); + if (ret < 0) + return ret; + + i = mma8452_get_odr_index(data); + ret &= MMA8452_HP_FILTER_CUTOFF_SEL_MASK; + *hz = mma8452_hp_filter_cutoff[i][ret][0]; + *uHz = mma8452_hp_filter_cutoff[i][ret][1]; + + return 0; +} + static int mma8452_read_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, int *val, int *val2, long mask) @@ -183,8 +275,7 @@ static int mma8452_read_raw(struct iio_dev *indio_dev, *val2 = mma8452_scales[i][1]; return IIO_VAL_INT_PLUS_MICRO; case IIO_CHAN_INFO_SAMP_FREQ: - i = (data->ctrl_reg1 & MMA8452_CTRL_DR_MASK) >> - MMA8452_CTRL_DR_SHIFT; + i = mma8452_get_odr_index(data); *val = mma8452_samp_freq[i][0]; *val2 = mma8452_samp_freq[i][1]; return IIO_VAL_INT_PLUS_MICRO; @@ -195,6 +286,16 @@ static int mma8452_read_raw(struct iio_dev *indio_dev, return ret; *val = sign_extend32(ret, 7); return IIO_VAL_INT; + case IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY: + if (data->data_cfg & MMA8452_DATA_CFG_HPF_MASK) { + ret = mma8452_read_hp_filter(data, val, val2); + if (ret < 0) + return ret; + } else { + *val = 0; + *val2 = 0; + } + return IIO_VAL_INT_PLUS_MICRO; } return -EINVAL; } @@ -236,12 +337,31 @@ fail: return ret; } +static int mma8452_set_hp_filter_frequency(struct mma8452_data *data, + int val, int val2) +{ + int i, reg; + + i = mma8452_get_hp_filter_index(data, val, val2); + if (i < 0) + return -EINVAL; + + reg = i2c_smbus_read_byte_data(data->client, + MMA8452_HP_FILTER_CUTOFF); + if (reg < 0) + return reg; + reg &= ~MMA8452_HP_FILTER_CUTOFF_SEL_MASK; + reg |= i; + + return mma8452_change_config(data, MMA8452_HP_FILTER_CUTOFF, reg); +} + static int mma8452_write_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, int val, int val2, long mask) { struct mma8452_data *data = iio_priv(indio_dev); - int i; + int i, ret; if (iio_buffer_enabled(indio_dev)) return -EBUSY; @@ -269,11 +389,217 @@ static int mma8452_write_raw(struct iio_dev *indio_dev, return -EINVAL; return mma8452_change_config(data, MMA8452_OFF_X + chan->scan_index, val); + + case IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY: + if (val == 0 && val2 == 0) { + data->data_cfg &= ~MMA8452_DATA_CFG_HPF_MASK; + } else { + data->data_cfg |= MMA8452_DATA_CFG_HPF_MASK; + ret = mma8452_set_hp_filter_frequency(data, val, val2); + if (ret < 0) + return ret; + } + return mma8452_change_config(data, MMA8452_DATA_CFG, + data->data_cfg); + default: return -EINVAL; } } +static int mma8452_read_thresh(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + enum iio_event_type type, + enum iio_event_direction dir, + enum iio_event_info info, + int *val, int *val2) +{ + struct mma8452_data *data = iio_priv(indio_dev); + int ret, us; + + switch (info) { + case IIO_EV_INFO_VALUE: + ret = i2c_smbus_read_byte_data(data->client, + MMA8452_TRANSIENT_THS); + if (ret < 0) + return ret; + + *val = ret & MMA8452_TRANSIENT_THS_MASK; + return IIO_VAL_INT; + + case IIO_EV_INFO_PERIOD: + ret = i2c_smbus_read_byte_data(data->client, + MMA8452_TRANSIENT_COUNT); + if (ret < 0) + return ret; + + us = ret * mma8452_transient_time_step_us[ + mma8452_get_odr_index(data)]; + *val = us / USEC_PER_SEC; + *val2 = us % USEC_PER_SEC; + return IIO_VAL_INT_PLUS_MICRO; + + case IIO_EV_INFO_HIGH_PASS_FILTER_3DB: + ret = i2c_smbus_read_byte_data(data->client, + MMA8452_TRANSIENT_CFG); + if (ret < 0) + return ret; + + if (ret & MMA8452_TRANSIENT_CFG_HPF_BYP) { + *val = 0; + *val2 = 0; + } else { + ret = mma8452_read_hp_filter(data, val, val2); + if (ret < 0) + return ret; + } + return IIO_VAL_INT_PLUS_MICRO; + + default: + return -EINVAL; + } +} + +static int mma8452_write_thresh(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + enum iio_event_type type, + enum iio_event_direction dir, + enum iio_event_info info, + int val, int val2) +{ + struct mma8452_data *data = iio_priv(indio_dev); + int ret, reg, steps; + + switch (info) { + case IIO_EV_INFO_VALUE: + return mma8452_change_config(data, MMA8452_TRANSIENT_THS, + val & MMA8452_TRANSIENT_THS_MASK); + + case IIO_EV_INFO_PERIOD: + steps = (val * USEC_PER_SEC + val2) / + mma8452_transient_time_step_us[ + mma8452_get_odr_index(data)]; + + if (steps > 0xff) + return -EINVAL; + + return mma8452_change_config(data, MMA8452_TRANSIENT_COUNT, + steps); + case IIO_EV_INFO_HIGH_PASS_FILTER_3DB: + reg = i2c_smbus_read_byte_data(data->client, + MMA8452_TRANSIENT_CFG); + if (reg < 0) + return reg; + + if (val == 0 && val2 == 0) { + reg |= MMA8452_TRANSIENT_CFG_HPF_BYP; + } else { + reg &= ~MMA8452_TRANSIENT_CFG_HPF_BYP; + ret = mma8452_set_hp_filter_frequency(data, val, val2); + if (ret < 0) + return ret; + } + return mma8452_change_config(data, MMA8452_TRANSIENT_CFG, reg); + + default: + return -EINVAL; + } +} + +static int mma8452_read_event_config(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + enum iio_event_type type, + enum iio_event_direction dir) +{ + struct mma8452_data *data = iio_priv(indio_dev); + int ret; + + ret = i2c_smbus_read_byte_data(data->client, MMA8452_TRANSIENT_CFG); + if (ret < 0) + return ret; + + return ret & MMA8452_TRANSIENT_CFG_CHAN(chan->scan_index) ? 1 : 0; +} + +static int mma8452_write_event_config(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + enum iio_event_type type, + enum iio_event_direction dir, + int state) +{ + struct mma8452_data *data = iio_priv(indio_dev); + int val; + + val = i2c_smbus_read_byte_data(data->client, MMA8452_TRANSIENT_CFG); + if (val < 0) + return val; + + if (state) + val |= MMA8452_TRANSIENT_CFG_CHAN(chan->scan_index); + else + val &= ~MMA8452_TRANSIENT_CFG_CHAN(chan->scan_index); + + val |= MMA8452_TRANSIENT_CFG_ELE; + + return mma8452_change_config(data, MMA8452_TRANSIENT_CFG, val); +} + +static void mma8452_transient_interrupt(struct iio_dev *indio_dev) +{ + struct mma8452_data *data = iio_priv(indio_dev); + s64 ts = iio_get_time_ns(); + int src; + + src = i2c_smbus_read_byte_data(data->client, MMA8452_TRANSIENT_SRC); + if (src < 0) + return; + + if (src & MMA8452_TRANSIENT_SRC_XTRANSE) + iio_push_event(indio_dev, + IIO_MOD_EVENT_CODE(IIO_ACCEL, 0, IIO_MOD_X, + IIO_EV_TYPE_THRESH, + IIO_EV_DIR_RISING), + ts); + + if (src & MMA8452_TRANSIENT_SRC_YTRANSE) + iio_push_event(indio_dev, + IIO_MOD_EVENT_CODE(IIO_ACCEL, 0, IIO_MOD_Y, + IIO_EV_TYPE_THRESH, + IIO_EV_DIR_RISING), + ts); + + if (src & MMA8452_TRANSIENT_SRC_ZTRANSE) + iio_push_event(indio_dev, + IIO_MOD_EVENT_CODE(IIO_ACCEL, 0, IIO_MOD_Z, + IIO_EV_TYPE_THRESH, + IIO_EV_DIR_RISING), + ts); +} + +static irqreturn_t mma8452_interrupt(int irq, void *p) +{ + struct iio_dev *indio_dev = p; + struct mma8452_data *data = iio_priv(indio_dev); + int ret = IRQ_NONE; + int src; + + src = i2c_smbus_read_byte_data(data->client, MMA8452_INT_SRC); + if (src < 0) + return IRQ_NONE; + + if (src & MMA8452_INT_DRDY) { + iio_trigger_poll_chained(indio_dev->trig); + ret = IRQ_HANDLED; + } + + if (src & MMA8452_INT_TRANS) { + mma8452_transient_interrupt(indio_dev); + ret = IRQ_HANDLED; + } + + return ret; +} + static irqreturn_t mma8452_trigger_handler(int irq, void *p) { struct iio_poll_func *pf = p; @@ -316,6 +642,33 @@ static int mma8452_reg_access_dbg(struct iio_dev *indio_dev, return 0; } +static const struct iio_event_spec mma8452_transient_event[] = { + { + .type = IIO_EV_TYPE_THRESH, + .dir = IIO_EV_DIR_RISING, + .mask_separate = BIT(IIO_EV_INFO_ENABLE), + .mask_shared_by_type = BIT(IIO_EV_INFO_VALUE) | + BIT(IIO_EV_INFO_PERIOD) | + BIT(IIO_EV_INFO_HIGH_PASS_FILTER_3DB) + }, +}; + +/* + * Threshold is configured in fixed 8G/127 steps regardless of + * currently selected scale for measurement. + */ +static IIO_CONST_ATTR_NAMED(accel_transient_scale, in_accel_scale, "0.617742"); + +static struct attribute *mma8452_event_attributes[] = { + &iio_const_attr_accel_transient_scale.dev_attr.attr, + NULL, +}; + +static struct attribute_group mma8452_event_attribute_group = { + .attrs = mma8452_event_attributes, + .name = "events", +}; + #define MMA8452_CHANNEL(axis, idx) { \ .type = IIO_ACCEL, \ .modified = 1, \ @@ -323,7 +676,8 @@ static int mma8452_reg_access_dbg(struct iio_dev *indio_dev, .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ BIT(IIO_CHAN_INFO_CALIBBIAS), \ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \ - BIT(IIO_CHAN_INFO_SCALE), \ + BIT(IIO_CHAN_INFO_SCALE) | \ + BIT(IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY), \ .scan_index = idx, \ .scan_type = { \ .sign = 's', \ @@ -332,6 +686,8 @@ static int mma8452_reg_access_dbg(struct iio_dev *indio_dev, .shift = 4, \ .endianness = IIO_BE, \ }, \ + .event_spec = mma8452_transient_event, \ + .num_event_specs = ARRAY_SIZE(mma8452_transient_event), \ } static const struct iio_chan_spec mma8452_channels[] = { @@ -344,6 +700,7 @@ static const struct iio_chan_spec mma8452_channels[] = { static struct attribute *mma8452_attributes[] = { &iio_dev_attr_sampling_frequency_available.dev_attr.attr, &iio_dev_attr_in_accel_scale_available.dev_attr.attr, + &iio_dev_attr_in_accel_filter_high_pass_3db_frequency_available.dev_attr.attr, NULL }; @@ -355,12 +712,83 @@ static const struct iio_info mma8452_info = { .attrs = &mma8452_group, .read_raw = &mma8452_read_raw, .write_raw = &mma8452_write_raw, + .event_attrs = &mma8452_event_attribute_group, + .read_event_value = &mma8452_read_thresh, + .write_event_value = &mma8452_write_thresh, + .read_event_config = &mma8452_read_event_config, + .write_event_config = &mma8452_write_event_config, .debugfs_reg_access = &mma8452_reg_access_dbg, .driver_module = THIS_MODULE, }; static const unsigned long mma8452_scan_masks[] = {0x7, 0}; +static int mma8452_data_rdy_trigger_set_state(struct iio_trigger *trig, + bool state) +{ + struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig); + struct mma8452_data *data = iio_priv(indio_dev); + int reg; + + reg = i2c_smbus_read_byte_data(data->client, MMA8452_CTRL_REG4); + if (reg < 0) + return reg; + + if (state) + reg |= MMA8452_INT_DRDY; + else + reg &= ~MMA8452_INT_DRDY; + + return mma8452_change_config(data, MMA8452_CTRL_REG4, reg); +} + +static int mma8452_validate_device(struct iio_trigger *trig, + struct iio_dev *indio_dev) +{ + struct iio_dev *indio = iio_trigger_get_drvdata(trig); + + if (indio != indio_dev) + return -EINVAL; + + return 0; +} + +static const struct iio_trigger_ops mma8452_trigger_ops = { + .set_trigger_state = mma8452_data_rdy_trigger_set_state, + .validate_device = mma8452_validate_device, + .owner = THIS_MODULE, +}; + +static int mma8452_trigger_setup(struct iio_dev *indio_dev) +{ + struct mma8452_data *data = iio_priv(indio_dev); + struct iio_trigger *trig; + int ret; + + trig = devm_iio_trigger_alloc(&data->client->dev, "%s-dev%d", + indio_dev->name, + indio_dev->id); + if (!trig) + return -ENOMEM; + + trig->dev.parent = &data->client->dev; + trig->ops = &mma8452_trigger_ops; + iio_trigger_set_drvdata(trig, indio_dev); + + ret = iio_trigger_register(trig); + if (ret) + return ret; + + indio_dev->trig = trig; + return 0; +} + +static void mma8452_trigger_cleanup(struct iio_dev *indio_dev) +{ + if (indio_dev->trig) + iio_trigger_unregister(indio_dev->trig); +} + static int mma8452_reset(struct i2c_client *client) { int i; @@ -425,25 +853,77 @@ static int mma8452_probe(struct i2c_client *client, if (ret < 0) return ret; + /* + * By default set transient threshold to max to avoid events if + * enabling without configuring threshold. + */ + ret = i2c_smbus_write_byte_data(client, MMA8452_TRANSIENT_THS, + MMA8452_TRANSIENT_THS_MASK); + if (ret < 0) + return ret; + + if (client->irq) { + /* + * Although we enable the transient interrupt source once and + * for all here the transient event detection itself is not + * enabled until userspace asks for it by + * mma8452_write_event_config() + */ + int supported_interrupts = MMA8452_INT_DRDY | MMA8452_INT_TRANS; + int enabled_interrupts = MMA8452_INT_TRANS; + + /* Assume wired to INT1 pin */ + ret = i2c_smbus_write_byte_data(client, + MMA8452_CTRL_REG5, + supported_interrupts); + if (ret < 0) + return ret; + + ret = i2c_smbus_write_byte_data(client, + MMA8452_CTRL_REG4, + enabled_interrupts); + if (ret < 0) + return ret; + + ret = mma8452_trigger_setup(indio_dev); + if (ret < 0) + return ret; + } + data->ctrl_reg1 = MMA8452_CTRL_ACTIVE | (MMA8452_CTRL_DR_DEFAULT << MMA8452_CTRL_DR_SHIFT); ret = i2c_smbus_write_byte_data(client, MMA8452_CTRL_REG1, data->ctrl_reg1); if (ret < 0) - return ret; + goto trigger_cleanup; ret = iio_triggered_buffer_setup(indio_dev, NULL, mma8452_trigger_handler, NULL); if (ret < 0) - return ret; + goto trigger_cleanup; + + if (client->irq) { + ret = devm_request_threaded_irq(&client->dev, + client->irq, + NULL, mma8452_interrupt, + IRQF_TRIGGER_LOW | IRQF_ONESHOT, + client->name, indio_dev); + if (ret) + goto buffer_cleanup; + } ret = iio_device_register(indio_dev); if (ret < 0) goto buffer_cleanup; + return 0; buffer_cleanup: iio_triggered_buffer_cleanup(indio_dev); + +trigger_cleanup: + mma8452_trigger_cleanup(indio_dev); + return ret; } @@ -453,6 +933,7 @@ static int mma8452_remove(struct i2c_client *client) iio_device_unregister(indio_dev); iio_triggered_buffer_cleanup(indio_dev); + mma8452_trigger_cleanup(indio_dev); mma8452_standby(iio_priv(indio_dev)); return 0; diff --git a/drivers/iio/accel/st_accel.h b/drivers/iio/accel/st_accel.h index 7ee9724b1428..aa1001931d0c 100644 --- a/drivers/iio/accel/st_accel.h +++ b/drivers/iio/accel/st_accel.h @@ -20,6 +20,7 @@ #define LSM330D_ACCEL_DEV_NAME "lsm330d_accel" #define LSM330DL_ACCEL_DEV_NAME "lsm330dl_accel" #define LSM330DLC_ACCEL_DEV_NAME "lsm330dlc_accel" +#define LIS331DL_ACCEL_DEV_NAME "lis331dl_accel" #define LIS331DLH_ACCEL_DEV_NAME "lis331dlh" #define LSM303DL_ACCEL_DEV_NAME "lsm303dl_accel" #define LSM303DLH_ACCEL_DEV_NAME "lsm303dlh_accel" diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c index 211b13271c61..4002e6410444 100644 --- a/drivers/iio/accel/st_accel_core.c +++ b/drivers/iio/accel/st_accel_core.c @@ -153,6 +153,44 @@ #define ST_ACCEL_4_IG1_EN_MASK 0x08 #define ST_ACCEL_4_MULTIREAD_BIT true +/* CUSTOM VALUES FOR SENSOR 5 */ +#define ST_ACCEL_5_WAI_EXP 0x3b +#define ST_ACCEL_5_ODR_ADDR 0x20 +#define ST_ACCEL_5_ODR_MASK 0x80 +#define ST_ACCEL_5_ODR_AVL_100HZ_VAL 0x00 +#define ST_ACCEL_5_ODR_AVL_400HZ_VAL 0x01 +#define ST_ACCEL_5_PW_ADDR 0x20 +#define ST_ACCEL_5_PW_MASK 0x40 +#define ST_ACCEL_5_FS_ADDR 0x20 +#define ST_ACCEL_5_FS_MASK 0x20 +#define ST_ACCEL_5_FS_AVL_2_VAL 0X00 +#define ST_ACCEL_5_FS_AVL_8_VAL 0X01 +/* TODO: check these resulting gain settings, these are not in the datsheet */ +#define ST_ACCEL_5_FS_AVL_2_GAIN IIO_G_TO_M_S_2(18000) +#define ST_ACCEL_5_FS_AVL_8_GAIN IIO_G_TO_M_S_2(72000) +#define ST_ACCEL_5_DRDY_IRQ_ADDR 0x22 +#define ST_ACCEL_5_DRDY_IRQ_INT1_MASK 0x04 +#define ST_ACCEL_5_DRDY_IRQ_INT2_MASK 0x20 +#define ST_ACCEL_5_IG1_EN_ADDR 0x21 +#define ST_ACCEL_5_IG1_EN_MASK 0x08 +#define ST_ACCEL_5_MULTIREAD_BIT false + +static const struct iio_chan_spec st_accel_8bit_channels[] = { + ST_SENSORS_LSM_CHANNELS(IIO_ACCEL, + BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), + ST_SENSORS_SCAN_X, 1, IIO_MOD_X, 's', IIO_LE, 8, 8, + ST_ACCEL_DEFAULT_OUT_X_L_ADDR+1), + ST_SENSORS_LSM_CHANNELS(IIO_ACCEL, + BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), + ST_SENSORS_SCAN_Y, 1, IIO_MOD_Y, 's', IIO_LE, 8, 8, + ST_ACCEL_DEFAULT_OUT_Y_L_ADDR+1), + ST_SENSORS_LSM_CHANNELS(IIO_ACCEL, + BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), + ST_SENSORS_SCAN_Z, 1, IIO_MOD_Z, 's', IIO_LE, 8, 8, + ST_ACCEL_DEFAULT_OUT_Z_L_ADDR+1), + IIO_CHAN_SOFT_TIMESTAMP(3) +}; + static const struct iio_chan_spec st_accel_12bit_channels[] = { ST_SENSORS_LSM_CHANNELS(IIO_ACCEL, BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), @@ -454,6 +492,54 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = { .multi_read_bit = ST_ACCEL_4_MULTIREAD_BIT, .bootime = 2, /* guess */ }, + { + .wai = ST_ACCEL_5_WAI_EXP, + .sensors_supported = { + [0] = LIS331DL_ACCEL_DEV_NAME, + }, + .ch = (struct iio_chan_spec *)st_accel_8bit_channels, + .odr = { + .addr = ST_ACCEL_5_ODR_ADDR, + .mask = ST_ACCEL_5_ODR_MASK, + .odr_avl = { + { 100, ST_ACCEL_5_ODR_AVL_100HZ_VAL }, + { 400, ST_ACCEL_5_ODR_AVL_400HZ_VAL, }, + }, + }, + .pw = { + .addr = ST_ACCEL_5_PW_ADDR, + .mask = ST_ACCEL_5_PW_MASK, + .value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE, + .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE, + }, + .enable_axis = { + .addr = ST_SENSORS_DEFAULT_AXIS_ADDR, + .mask = ST_SENSORS_DEFAULT_AXIS_MASK, + }, + .fs = { + .addr = ST_ACCEL_5_FS_ADDR, + .mask = ST_ACCEL_5_FS_MASK, + .fs_avl = { + [0] = { + .num = ST_ACCEL_FS_AVL_2G, + .value = ST_ACCEL_5_FS_AVL_2_VAL, + .gain = ST_ACCEL_5_FS_AVL_2_GAIN, + }, + [1] = { + .num = ST_ACCEL_FS_AVL_8G, + .value = ST_ACCEL_5_FS_AVL_8_VAL, + .gain = ST_ACCEL_5_FS_AVL_8_GAIN, + }, + }, + }, + .drdy_irq = { + .addr = ST_ACCEL_5_DRDY_IRQ_ADDR, + .mask_int1 = ST_ACCEL_5_DRDY_IRQ_INT1_MASK, + .mask_int2 = ST_ACCEL_5_DRDY_IRQ_INT2_MASK, + }, + .multi_read_bit = ST_ACCEL_5_MULTIREAD_BIT, + .bootime = 2, /* guess */ + }, }; static int st_accel_read_raw(struct iio_dev *indio_dev, diff --git a/drivers/iio/accel/st_accel_i2c.c b/drivers/iio/accel/st_accel_i2c.c index 6b720c190b2d..d4ad72ca4a3d 100644 --- a/drivers/iio/accel/st_accel_i2c.c +++ b/drivers/iio/accel/st_accel_i2c.c @@ -49,6 +49,10 @@ static const struct of_device_id st_accel_of_match[] = { .data = LSM330DLC_ACCEL_DEV_NAME, }, { + .compatible = "st,lis331dl-accel", + .data = LIS331DL_ACCEL_DEV_NAME, + }, + { .compatible = "st,lis331dlh-accel", .data = LIS331DLH_ACCEL_DEV_NAME, }, diff --git a/drivers/iio/adc/twl4030-madc.c b/drivers/iio/adc/twl4030-madc.c index 94c5f05b4bc1..06f4792240f0 100644 --- a/drivers/iio/adc/twl4030-madc.c +++ b/drivers/iio/adc/twl4030-madc.c @@ -235,7 +235,7 @@ static int twl4030battery_temperature(int raw_volt) if (ret < 0) return ret; - curr = ((val & TWL4030_BCI_ITHEN) + 1) * 10; + curr = ((val & TWL4030_BCI_ITHSENS) + 1) * 10; /* Getting and calculating the thermistor resistance in ohms */ res = volt * 1000 / curr; /* calculating temperature */ @@ -662,10 +662,8 @@ EXPORT_SYMBOL_GPL(twl4030_get_madc_conversion); * * @madc: pointer to twl4030_madc_data struct * @chan: can be one of the two values: - * TWL4030_BCI_ITHEN - * Enables bias current for main battery type reading - * TWL4030_BCI_TYPEN - * Enables bias current for main battery temperature sensing + * 0 - Enables bias current for main battery type reading + * 1 - Enables bias current for main battery temperature sensing * @on: enable or disable chan. * * Function to enable or disable bias current for diff --git a/drivers/iio/adc/vf610_adc.c b/drivers/iio/adc/vf610_adc.c index 56292ae4538d..480f335a0f9f 100644 --- a/drivers/iio/adc/vf610_adc.c +++ b/drivers/iio/adc/vf610_adc.c @@ -118,15 +118,21 @@ enum average_sel { VF610_ADC_SAMPLE_32, }; +enum conversion_mode_sel { + VF610_ADC_CONV_NORMAL, + VF610_ADC_CONV_HIGH_SPEED, + VF610_ADC_CONV_LOW_POWER, +}; + struct vf610_adc_feature { enum clk_sel clk_sel; enum vol_ref vol_ref; + enum conversion_mode_sel conv_mode; int clk_div; int sample_rate; int res_mode; - bool lpm; bool calibration; bool ovwren; }; @@ -139,6 +145,8 @@ struct vf610_adc { u32 vref_uv; u32 value; struct regulator *vref; + + u32 max_adck_rate[3]; struct vf610_adc_feature adc_feature; u32 sample_freq_avail[5]; @@ -148,46 +156,22 @@ struct vf610_adc { static const u32 vf610_hw_avgs[] = { 1, 4, 8, 16, 32 }; -#define VF610_ADC_CHAN(_idx, _chan_type) { \ - .type = (_chan_type), \ - .indexed = 1, \ - .channel = (_idx), \ - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ - .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \ - BIT(IIO_CHAN_INFO_SAMP_FREQ), \ -} - -#define VF610_ADC_TEMPERATURE_CHAN(_idx, _chan_type) { \ - .type = (_chan_type), \ - .channel = (_idx), \ - .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), \ -} - -static const struct iio_chan_spec vf610_adc_iio_channels[] = { - VF610_ADC_CHAN(0, IIO_VOLTAGE), - VF610_ADC_CHAN(1, IIO_VOLTAGE), - VF610_ADC_CHAN(2, IIO_VOLTAGE), - VF610_ADC_CHAN(3, IIO_VOLTAGE), - VF610_ADC_CHAN(4, IIO_VOLTAGE), - VF610_ADC_CHAN(5, IIO_VOLTAGE), - VF610_ADC_CHAN(6, IIO_VOLTAGE), - VF610_ADC_CHAN(7, IIO_VOLTAGE), - VF610_ADC_CHAN(8, IIO_VOLTAGE), - VF610_ADC_CHAN(9, IIO_VOLTAGE), - VF610_ADC_CHAN(10, IIO_VOLTAGE), - VF610_ADC_CHAN(11, IIO_VOLTAGE), - VF610_ADC_CHAN(12, IIO_VOLTAGE), - VF610_ADC_CHAN(13, IIO_VOLTAGE), - VF610_ADC_CHAN(14, IIO_VOLTAGE), - VF610_ADC_CHAN(15, IIO_VOLTAGE), - VF610_ADC_TEMPERATURE_CHAN(26, IIO_TEMP), - /* sentinel */ -}; - static inline void vf610_adc_calculate_rates(struct vf610_adc *info) { + struct vf610_adc_feature *adc_feature = &info->adc_feature; unsigned long adck_rate, ipg_rate = clk_get_rate(info->clk); - int i; + int divisor, i; + + adck_rate = info->max_adck_rate[adc_feature->conv_mode]; + + if (adck_rate) { + /* calculate clk divider which is within specification */ + divisor = ipg_rate / adck_rate; + adc_feature->clk_div = 1 << fls(divisor + 1); + } else { + /* fall-back value using a safe divisor */ + adc_feature->clk_div = 8; + } /* * Calculate ADC sample frequencies @@ -219,10 +203,8 @@ static inline void vf610_adc_cfg_init(struct vf610_adc *info) adc_feature->res_mode = 12; adc_feature->sample_rate = 1; - adc_feature->lpm = true; - /* Use a save ADCK which is below 20MHz on all devices */ - adc_feature->clk_div = 8; + adc_feature->conv_mode = VF610_ADC_CONV_LOW_POWER; vf610_adc_calculate_rates(info); } @@ -304,10 +286,12 @@ static void vf610_adc_cfg_set(struct vf610_adc *info) cfg_data = readl(info->regs + VF610_REG_ADC_CFG); cfg_data &= ~VF610_ADC_ADLPC_EN; - if (adc_feature->lpm) + if (adc_feature->conv_mode == VF610_ADC_CONV_LOW_POWER) cfg_data |= VF610_ADC_ADLPC_EN; cfg_data &= ~VF610_ADC_ADHSC_EN; + if (adc_feature->conv_mode == VF610_ADC_CONV_HIGH_SPEED) + cfg_data |= VF610_ADC_ADHSC_EN; writel(cfg_data, info->regs + VF610_REG_ADC_CFG); } @@ -409,6 +393,81 @@ static void vf610_adc_hw_init(struct vf610_adc *info) vf610_adc_cfg_set(info); } +static int vf610_set_conversion_mode(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + unsigned int mode) +{ + struct vf610_adc *info = iio_priv(indio_dev); + + mutex_lock(&indio_dev->mlock); + info->adc_feature.conv_mode = mode; + vf610_adc_calculate_rates(info); + vf610_adc_hw_init(info); + mutex_unlock(&indio_dev->mlock); + + return 0; +} + +static int vf610_get_conversion_mode(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan) +{ + struct vf610_adc *info = iio_priv(indio_dev); + + return info->adc_feature.conv_mode; +} + +static const char * const vf610_conv_modes[] = { "normal", "high-speed", + "low-power" }; + +static const struct iio_enum vf610_conversion_mode = { + .items = vf610_conv_modes, + .num_items = ARRAY_SIZE(vf610_conv_modes), + .get = vf610_get_conversion_mode, + .set = vf610_set_conversion_mode, +}; + +static const struct iio_chan_spec_ext_info vf610_ext_info[] = { + IIO_ENUM("conversion_mode", IIO_SHARED_BY_DIR, &vf610_conversion_mode), + {}, +}; + +#define VF610_ADC_CHAN(_idx, _chan_type) { \ + .type = (_chan_type), \ + .indexed = 1, \ + .channel = (_idx), \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \ + BIT(IIO_CHAN_INFO_SAMP_FREQ), \ + .ext_info = vf610_ext_info, \ +} + +#define VF610_ADC_TEMPERATURE_CHAN(_idx, _chan_type) { \ + .type = (_chan_type), \ + .channel = (_idx), \ + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), \ +} + +static const struct iio_chan_spec vf610_adc_iio_channels[] = { + VF610_ADC_CHAN(0, IIO_VOLTAGE), + VF610_ADC_CHAN(1, IIO_VOLTAGE), + VF610_ADC_CHAN(2, IIO_VOLTAGE), + VF610_ADC_CHAN(3, IIO_VOLTAGE), + VF610_ADC_CHAN(4, IIO_VOLTAGE), + VF610_ADC_CHAN(5, IIO_VOLTAGE), + VF610_ADC_CHAN(6, IIO_VOLTAGE), + VF610_ADC_CHAN(7, IIO_VOLTAGE), + VF610_ADC_CHAN(8, IIO_VOLTAGE), + VF610_ADC_CHAN(9, IIO_VOLTAGE), + VF610_ADC_CHAN(10, IIO_VOLTAGE), + VF610_ADC_CHAN(11, IIO_VOLTAGE), + VF610_ADC_CHAN(12, IIO_VOLTAGE), + VF610_ADC_CHAN(13, IIO_VOLTAGE), + VF610_ADC_CHAN(14, IIO_VOLTAGE), + VF610_ADC_CHAN(15, IIO_VOLTAGE), + VF610_ADC_TEMPERATURE_CHAN(26, IIO_TEMP), + /* sentinel */ +}; + static int vf610_adc_read_data(struct vf610_adc *info) { int result; @@ -651,6 +710,9 @@ static int vf610_adc_probe(struct platform_device *pdev) info->vref_uv = regulator_get_voltage(info->vref); + of_property_read_u32_array(pdev->dev.of_node, "fsl,adck-max-frequency", + info->max_adck_rate, 3); + platform_set_drvdata(pdev, indio_dev); init_completion(&info->completion); diff --git a/drivers/iio/buffer_cb.c b/drivers/iio/buffer_cb.c index eb46e728aa2e..1648e6e5a848 100644 --- a/drivers/iio/buffer_cb.c +++ b/drivers/iio/buffer_cb.c @@ -33,6 +33,8 @@ static void iio_buffer_cb_release(struct iio_buffer *buffer) static const struct iio_buffer_access_funcs iio_cb_access = { .store_to = &iio_buffer_cb_store_to, .release = &iio_buffer_cb_release, + + .modes = INDIO_BUFFER_SOFTWARE | INDIO_BUFFER_TRIGGERED, }; struct iio_cb_buffer *iio_channel_get_all_cb(struct device *dev, diff --git a/drivers/iio/common/st_sensors/st_sensors_core.c b/drivers/iio/common/st_sensors/st_sensors_core.c index e1634d2b6ae8..8086cbcff87d 100644 --- a/drivers/iio/common/st_sensors/st_sensors_core.c +++ b/drivers/iio/common/st_sensors/st_sensors_core.c @@ -431,7 +431,9 @@ static int st_sensors_read_axis_data(struct iio_dev *indio_dev, if (err < 0) goto st_sensors_free_memory; - if (byte_for_channel == 2) + if (byte_for_channel == 1) + *data = (s8)*outdata; + else if (byte_for_channel == 2) *data = (s16)get_unaligned_le16(outdata); else if (byte_for_channel == 3) *data = (s32)st_sensors_get_unaligned_le24(outdata); diff --git a/drivers/iio/industrialio-buffer.c b/drivers/iio/industrialio-buffer.c index 11291259b7b9..6eee1b044c60 100644 --- a/drivers/iio/industrialio-buffer.c +++ b/drivers/iio/industrialio-buffer.c @@ -239,13 +239,19 @@ static ssize_t iio_scan_el_show(struct device *dev, /* Note NULL used as error indicator as it doesn't make sense. */ static const unsigned long *iio_scan_mask_match(const unsigned long *av_masks, unsigned int masklength, - const unsigned long *mask) + const unsigned long *mask, + bool strict) { if (bitmap_empty(mask, masklength)) return NULL; while (*av_masks) { - if (bitmap_subset(mask, av_masks, masklength)) - return av_masks; + if (strict) { + if (bitmap_equal(mask, av_masks, masklength)) + return av_masks; + } else { + if (bitmap_subset(mask, av_masks, masklength)) + return av_masks; + } av_masks += BITS_TO_LONGS(masklength); } return NULL; @@ -295,7 +301,7 @@ static int iio_scan_mask_set(struct iio_dev *indio_dev, if (indio_dev->available_scan_masks) { mask = iio_scan_mask_match(indio_dev->available_scan_masks, indio_dev->masklength, - trialmask); + trialmask, false); if (!mask) goto err_invalid_mask; } @@ -602,8 +608,10 @@ static int iio_verify_update(struct iio_dev *indio_dev, { unsigned long *compound_mask; const unsigned long *scan_mask; + bool strict_scanmask = false; struct iio_buffer *buffer; bool scan_timestamp; + unsigned int modes; memset(config, 0, sizeof(*config)); @@ -615,12 +623,30 @@ static int iio_verify_update(struct iio_dev *indio_dev, list_is_singular(&indio_dev->buffer_list)) return 0; + modes = indio_dev->modes; + + list_for_each_entry(buffer, &indio_dev->buffer_list, buffer_list) { + if (buffer == remove_buffer) + continue; + modes &= buffer->access->modes; + } + + if (insert_buffer) + modes &= insert_buffer->access->modes; + /* Definitely possible for devices to support both of these. */ - if ((indio_dev->modes & INDIO_BUFFER_TRIGGERED) && indio_dev->trig) { + if ((modes & INDIO_BUFFER_TRIGGERED) && indio_dev->trig) { config->mode = INDIO_BUFFER_TRIGGERED; - } else if (indio_dev->modes & INDIO_BUFFER_HARDWARE) { + } else if (modes & INDIO_BUFFER_HARDWARE) { + /* + * Keep things simple for now and only allow a single buffer to + * be connected in hardware mode. + */ + if (insert_buffer && !list_empty(&indio_dev->buffer_list)) + return -EINVAL; config->mode = INDIO_BUFFER_HARDWARE; - } else if (indio_dev->modes & INDIO_BUFFER_SOFTWARE) { + strict_scanmask = true; + } else if (modes & INDIO_BUFFER_SOFTWARE) { config->mode = INDIO_BUFFER_SOFTWARE; } else { /* Can only occur on first buffer */ @@ -654,7 +680,8 @@ static int iio_verify_update(struct iio_dev *indio_dev, if (indio_dev->available_scan_masks) { scan_mask = iio_scan_mask_match(indio_dev->available_scan_masks, indio_dev->masklength, - compound_mask); + compound_mask, + strict_scanmask); kfree(compound_mask); if (scan_mask == NULL) return -EINVAL; @@ -888,8 +915,6 @@ static ssize_t iio_buffer_store_enable(struct device *dev, ret = __iio_update_buffers(indio_dev, NULL, indio_dev->buffer); - if (ret < 0) - goto done; done: mutex_unlock(&indio_dev->mlock); return (ret < 0) ? ret : len; @@ -968,6 +993,15 @@ int iio_buffer_alloc_sysfs_and_mask(struct iio_dev *indio_dev) int ret, i, attrn, attrcount, attrcount_orig = 0; const struct iio_chan_spec *channels; + channels = indio_dev->channels; + if (channels) { + int ml = indio_dev->masklength; + + for (i = 0; i < indio_dev->num_channels; i++) + ml = max(ml, channels[i].scan_index + 1); + indio_dev->masklength = ml; + } + if (!buffer) return 0; @@ -1011,12 +1045,6 @@ int iio_buffer_alloc_sysfs_and_mask(struct iio_dev *indio_dev) if (channels[i].scan_index < 0) continue; - /* Establish necessary mask length */ - if (channels[i].scan_index > - (int)indio_dev->masklength - 1) - indio_dev->masklength - = channels[i].scan_index + 1; - ret = iio_buffer_add_channel_sysfs(indio_dev, &channels[i]); if (ret < 0) diff --git a/drivers/iio/kfifo_buf.c b/drivers/iio/kfifo_buf.c index 55c267bbfd2f..c5b999f0c519 100644 --- a/drivers/iio/kfifo_buf.c +++ b/drivers/iio/kfifo_buf.c @@ -136,6 +136,8 @@ static const struct iio_buffer_access_funcs kfifo_access_funcs = { .set_bytes_per_datum = &iio_set_bytes_per_datum_kfifo, .set_length = &iio_set_length_kfifo, .release = &iio_kfifo_buffer_release, + + .modes = INDIO_BUFFER_SOFTWARE | INDIO_BUFFER_TRIGGERED, }; struct iio_buffer *iio_kfifo_allocate(void) diff --git a/drivers/iio/light/stk3310.c b/drivers/iio/light/stk3310.c index e79b9d89b024..fee4297d7c8f 100644 --- a/drivers/iio/light/stk3310.c +++ b/drivers/iio/light/stk3310.c @@ -370,7 +370,7 @@ static int stk3310_write_raw(struct iio_dev *indio_dev, int val, int val2, long mask) { int ret; - unsigned int index; + int index; struct stk3310_data *data = iio_priv(indio_dev); switch (mask) { diff --git a/drivers/iio/magnetometer/mmc35240.c b/drivers/iio/magnetometer/mmc35240.c index aa6e25d3bfc3..7a2ea71c659a 100644 --- a/drivers/iio/magnetometer/mmc35240.c +++ b/drivers/iio/magnetometer/mmc35240.c @@ -58,6 +58,31 @@ #define MMC35240_WAIT_CHARGE_PUMP 50000 /* us */ #define MMC53240_WAIT_SET_RESET 1000 /* us */ +/* + * Memsic OTP process code piece is put here for reference: + * + * #define OTP_CONVERT(REG) ((float)((REG) >=32 ? (32 - (REG)) : (REG)) * 0.006 + * 1) For X axis, the COEFFICIENT is always 1. + * 2) For Y axis, the COEFFICIENT is as below: + * f_OTP_matrix[4] = OTP_CONVERT(((reg_data[1] & 0x03) << 4) | + * (reg_data[2] >> 4)) + 1.0; + * 3) For Z axis, the COEFFICIENT is as below: + * f_OTP_matrix[8] = (OTP_CONVERT(reg_data[3] & 0x3f) + 1) * 1.35; + * We implemented the OTP logic into driver. + */ + +/* scale = 1000 here for Y otp */ +#define MMC35240_OTP_CONVERT_Y(REG) (((REG) >= 32 ? (32 - (REG)) : (REG)) * 6) + +/* 0.6 * 1.35 = 0.81, scale 10000 for Z otp */ +#define MMC35240_OTP_CONVERT_Z(REG) (((REG) >= 32 ? (32 - (REG)) : (REG)) * 81) + +#define MMC35240_X_COEFF(x) (x) +#define MMC35240_Y_COEFF(y) (y + 1000) +#define MMC35240_Z_COEFF(z) (z + 13500) + +#define MMC35240_OTP_START_ADDR 0x1B + enum mmc35240_resolution { MMC35240_16_BITS_SLOW = 0, /* 100 Hz */ MMC35240_16_BITS_FAST, /* 200 Hz */ @@ -77,7 +102,7 @@ static const struct { } mmc35240_props_table[] = { /* 16 bits, 100Hz ODR */ { - {1024, 1024, 770}, + {1024, 1024, 1024}, 32768, }, /* 16 bits, 200Hz ODR */ @@ -102,6 +127,10 @@ struct mmc35240_data { struct mutex mutex; struct regmap *regmap; enum mmc35240_resolution res; + + /* OTP compensation */ + int axis_coef[3]; + int axis_scale[3]; }; static const int mmc35240_samp_freq[] = {100, 200, 333, 666}; @@ -113,8 +142,9 @@ static IIO_CONST_ATTR_SAMP_FREQ_AVAIL("100 200 333 666"); .modified = 1, \ .channel2 = IIO_MOD_ ## _axis, \ .address = AXIS_ ## _axis, \ - .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), \ - .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SAMP_FREQ), \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \ + BIT(IIO_CHAN_INFO_SCALE), \ } static const struct iio_chan_spec mmc35240_channels[] = { @@ -125,6 +155,7 @@ static const struct iio_chan_spec mmc35240_channels[] = { static struct attribute *mmc35240_attributes[] = { &iio_const_attr_sampling_frequency_available.dev_attr.attr, + NULL }; static const struct attribute_group mmc35240_attribute_group = { @@ -170,8 +201,9 @@ static int mmc35240_hw_set(struct mmc35240_data *data, bool set) static int mmc35240_init(struct mmc35240_data *data) { - int ret; + int ret, y_convert, z_convert; unsigned int reg_id; + u8 otp_data[6]; ret = regmap_read(data->regmap, MMC35240_REG_ID, ®_id); if (ret < 0) { @@ -195,9 +227,30 @@ static int mmc35240_init(struct mmc35240_data *data) return ret; /* set default sampling frequency */ - return regmap_update_bits(data->regmap, MMC35240_REG_CTRL1, - MMC35240_CTRL1_BW_MASK, - data->res << MMC35240_CTRL1_BW_SHIFT); + ret = regmap_update_bits(data->regmap, MMC35240_REG_CTRL1, + MMC35240_CTRL1_BW_MASK, + data->res << MMC35240_CTRL1_BW_SHIFT); + if (ret < 0) + return ret; + + ret = regmap_bulk_read(data->regmap, MMC35240_OTP_START_ADDR, + (u8 *)otp_data, sizeof(otp_data)); + if (ret < 0) + return ret; + + y_convert = MMC35240_OTP_CONVERT_Y(((otp_data[1] & 0x03) << 4) | + (otp_data[2] >> 4)); + z_convert = MMC35240_OTP_CONVERT_Z(otp_data[3] & 0x3f); + + data->axis_coef[0] = MMC35240_X_COEFF(1); + data->axis_coef[1] = MMC35240_Y_COEFF(y_convert); + data->axis_coef[2] = MMC35240_Z_COEFF(z_convert); + + data->axis_scale[0] = 1; + data->axis_scale[1] = 1000; + data->axis_scale[2] = 10000; + + return 0; } static int mmc35240_take_measurement(struct mmc35240_data *data) @@ -217,7 +270,8 @@ static int mmc35240_take_measurement(struct mmc35240_data *data) return ret; if (reg_status & MMC35240_STATUS_MEAS_DONE_BIT) break; - msleep(20); + /* minimum wait time to complete measurement is 10 ms */ + usleep_range(10000, 11000); } if (tries < 0) { @@ -240,9 +294,19 @@ static int mmc35240_read_measurement(struct mmc35240_data *data, __le16 buf[3]) 3 * sizeof(__le16)); } -static int mmc35240_raw_to_gauss(struct mmc35240_data *data, int index, - __le16 buf[], - int *val, int *val2) +/** + * mmc35240_raw_to_mgauss - convert raw readings to milli gauss. Also apply + compensation for output value. + * + * @data: device private data + * @index: axis index for which we want the conversion + * @buf: raw data to be converted, 2 bytes in little endian format + * @val: compensated output reading (unit is milli gauss) + * + * Returns: 0 in case of success, -EINVAL when @index is not valid + */ +static int mmc35240_raw_to_mgauss(struct mmc35240_data *data, int index, + __le16 buf[], int *val) { int raw_x, raw_y, raw_z; int sens_x, sens_y, sens_z; @@ -260,22 +324,22 @@ static int mmc35240_raw_to_gauss(struct mmc35240_data *data, int index, switch (index) { case AXIS_X: - *val = (raw_x - nfo) / sens_x; - *val2 = ((raw_x - nfo) % sens_x) * 1000000; + *val = (raw_x - nfo) * 1000 / sens_x; break; case AXIS_Y: - *val = (raw_y - nfo) / sens_y - (raw_z - nfo) / sens_z; - *val2 = (((raw_y - nfo) % sens_y - (raw_z - nfo) % sens_z)) - * 1000000; + *val = (raw_y - nfo) * 1000 / sens_y - + (raw_z - nfo) * 1000 / sens_z; break; case AXIS_Z: - *val = (raw_y - nfo) / sens_y + (raw_z - nfo) / sens_z; - *val2 = (((raw_y - nfo) % sens_y + (raw_z - nfo) % sens_z)) - * 1000000; + *val = (raw_y - nfo) * 1000 / sens_y + + (raw_z - nfo) * 1000 / sens_z; break; default: return -EINVAL; } + /* apply OTP compensation */ + *val = (*val) * data->axis_coef[index] / data->axis_scale[index]; + return 0; } @@ -289,16 +353,19 @@ static int mmc35240_read_raw(struct iio_dev *indio_dev, __le16 buf[3]; switch (mask) { - case IIO_CHAN_INFO_PROCESSED: + case IIO_CHAN_INFO_RAW: mutex_lock(&data->mutex); ret = mmc35240_read_measurement(data, buf); mutex_unlock(&data->mutex); if (ret < 0) return ret; - ret = mmc35240_raw_to_gauss(data, chan->address, - buf, val, val2); + ret = mmc35240_raw_to_mgauss(data, chan->address, buf, val); if (ret < 0) return ret; + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + *val = 0; + *val2 = 1000; return IIO_VAL_INT_PLUS_MICRO; case IIO_CHAN_INFO_SAMP_FREQ: mutex_lock(&data->mutex); @@ -308,7 +375,7 @@ static int mmc35240_read_raw(struct iio_dev *indio_dev, return ret; i = (reg & MMC35240_CTRL1_BW_MASK) >> MMC35240_CTRL1_BW_SHIFT; - if (i < 0 || i > ARRAY_SIZE(mmc35240_samp_freq)) + if (i < 0 || i >= ARRAY_SIZE(mmc35240_samp_freq)) return -EINVAL; *val = mmc35240_samp_freq[i]; @@ -490,7 +557,7 @@ static const struct acpi_device_id mmc35240_acpi_match[] = { MODULE_DEVICE_TABLE(acpi, mmc35240_acpi_match); static const struct i2c_device_id mmc35240_id[] = { - {"MMC35240", 0}, + {"mmc35240", 0}, {} }; MODULE_DEVICE_TABLE(i2c, mmc35240_id); diff --git a/drivers/staging/iio/accel/sca3000_ring.c b/drivers/staging/iio/accel/sca3000_ring.c index 8589eade1057..23685e74917e 100644 --- a/drivers/staging/iio/accel/sca3000_ring.c +++ b/drivers/staging/iio/accel/sca3000_ring.c @@ -258,6 +258,8 @@ static const struct iio_buffer_access_funcs sca3000_ring_access_funcs = { .read_first_n = &sca3000_read_first_n_hw_rb, .data_available = sca3000_ring_buf_data_available, .release = sca3000_ring_release, + + .modes = INDIO_BUFFER_HARDWARE, }; int sca3000_configure_ring(struct iio_dev *indio_dev) diff --git a/drivers/staging/iio/iio_dummy_evgen.c b/drivers/staging/iio/iio_dummy_evgen.c index 0c9c86d7b509..c54d5b5443a6 100644 --- a/drivers/staging/iio/iio_dummy_evgen.c +++ b/drivers/staging/iio/iio_dummy_evgen.c @@ -128,13 +128,11 @@ EXPORT_SYMBOL_GPL(iio_dummy_evgen_get_irq); * * Used by client driver instances to give the irqs back when they disconnect */ -int iio_dummy_evgen_release_irq(int irq) +void iio_dummy_evgen_release_irq(int irq) { mutex_lock(&iio_evgen->lock); iio_evgen->inuse[irq - iio_evgen->base] = false; mutex_unlock(&iio_evgen->lock); - - return 0; } EXPORT_SYMBOL_GPL(iio_dummy_evgen_release_irq); diff --git a/drivers/staging/iio/iio_dummy_evgen.h b/drivers/staging/iio/iio_dummy_evgen.h index 2ac293ab7c8f..d044b946e74a 100644 --- a/drivers/staging/iio/iio_dummy_evgen.h +++ b/drivers/staging/iio/iio_dummy_evgen.h @@ -8,6 +8,6 @@ struct iio_dummy_regs { struct iio_dummy_regs *iio_dummy_evgen_get_regs(int irq); int iio_dummy_evgen_get_irq(void); -int iio_dummy_evgen_release_irq(int irq); +void iio_dummy_evgen_release_irq(int irq); #endif /* _IIO_DUMMY_EVGEN_H_ */ diff --git a/drivers/staging/iio/iio_simple_dummy.c b/drivers/staging/iio/iio_simple_dummy.c index b47bf9fb64be..1629a8a6bf26 100644 --- a/drivers/staging/iio/iio_simple_dummy.c +++ b/drivers/staging/iio/iio_simple_dummy.c @@ -30,7 +30,7 @@ * dummy devices are registered. */ static unsigned instances = 1; -module_param(instances, int, 0); +module_param(instances, uint, 0); /* Pointer array used to fake bus elements */ static struct iio_dev **iio_dummy_devs; @@ -665,9 +665,8 @@ error_ret: * * Parameters follow those of iio_dummy_probe for buses. */ -static int iio_dummy_remove(int index) +static void iio_dummy_remove(int index) { - int ret; /* * Get a pointer to the device instance iio_dev structure * from the bus subsystem. E.g. @@ -685,15 +684,10 @@ static int iio_dummy_remove(int index) /* Buffered capture related cleanup */ iio_simple_dummy_unconfigure_buffer(indio_dev); - ret = iio_simple_dummy_events_unregister(indio_dev); - if (ret) - goto error_ret; + iio_simple_dummy_events_unregister(indio_dev); /* Free all structures */ iio_device_free(indio_dev); - -error_ret: - return ret; } /** @@ -722,9 +716,16 @@ static __init int iio_dummy_init(void) for (i = 0; i < instances; i++) { ret = iio_dummy_probe(i); if (ret < 0) - return ret; + goto error_remove_devs; } return 0; + +error_remove_devs: + while (i--) + iio_dummy_remove(i); + + kfree(iio_dummy_devs); + return ret; } module_init(iio_dummy_init); diff --git a/drivers/staging/iio/iio_simple_dummy.h b/drivers/staging/iio/iio_simple_dummy.h index d86ccb76eb6d..e877a99540ab 100644 --- a/drivers/staging/iio/iio_simple_dummy.h +++ b/drivers/staging/iio/iio_simple_dummy.h @@ -79,7 +79,7 @@ int iio_simple_dummy_write_event_value(struct iio_dev *indio_dev, int val2); int iio_simple_dummy_events_register(struct iio_dev *indio_dev); -int iio_simple_dummy_events_unregister(struct iio_dev *indio_dev); +void iio_simple_dummy_events_unregister(struct iio_dev *indio_dev); #else /* Stubs for when events are disabled at compile time */ @@ -89,11 +89,9 @@ iio_simple_dummy_events_register(struct iio_dev *indio_dev) return 0; }; -static inline int +static inline void iio_simple_dummy_events_unregister(struct iio_dev *indio_dev) -{ - return 0; -}; +{ }; #endif /* CONFIG_IIO_SIMPLE_DUMMY_EVENTS*/ diff --git a/drivers/staging/iio/iio_simple_dummy_events.c b/drivers/staging/iio/iio_simple_dummy_events.c index c32ef78d8e5f..ecc563cb6cb9 100644 --- a/drivers/staging/iio/iio_simple_dummy_events.c +++ b/drivers/staging/iio/iio_simple_dummy_events.c @@ -257,13 +257,11 @@ error_ret: * iio_simple_dummy_events_unregister() - tidy up interrupt handling on remove * @indio_dev: device instance data */ -int iio_simple_dummy_events_unregister(struct iio_dev *indio_dev) +void iio_simple_dummy_events_unregister(struct iio_dev *indio_dev) { struct iio_dummy_state *st = iio_priv(indio_dev); free_irq(st->event_irq, indio_dev); /* Not part of normal driver */ iio_dummy_evgen_release_irq(st->event_irq); - - return 0; } |