diff options
Diffstat (limited to 'drivers')
47 files changed, 65 insertions, 65 deletions
diff --git a/drivers/acpi/acpi_memhotplug.c b/drivers/acpi/acpi_memhotplug.c index 63a17b55b39b..7a0f4aa4fa1e 100644 --- a/drivers/acpi/acpi_memhotplug.c +++ b/drivers/acpi/acpi_memhotplug.c @@ -20,7 +20,7 @@ * * * ACPI based HotPlug driver that supports Memory Hotplug - * This driver fields notifications from firmare for memory add + * This driver fields notifications from firmware for memory add * and remove operations and alerts the VM of the affected memory * ranges. */ diff --git a/drivers/acpi/executer/exprep.c b/drivers/acpi/executer/exprep.c index 5d438c32989d..a7dc87ecee37 100644 --- a/drivers/acpi/executer/exprep.c +++ b/drivers/acpi/executer/exprep.c @@ -404,7 +404,7 @@ acpi_ex_prep_common_field_object(union acpi_operand_object *obj_desc, * * RETURN: Status * - * DESCRIPTION: Construct an union acpi_operand_object of type def_field and + * DESCRIPTION: Construct a union acpi_operand_object of type def_field and * connect it to the parent Node. * ******************************************************************************/ diff --git a/drivers/acpi/executer/exresolv.c b/drivers/acpi/executer/exresolv.c index 89571b92a522..60e8c47128e9 100644 --- a/drivers/acpi/executer/exresolv.c +++ b/drivers/acpi/executer/exresolv.c @@ -146,7 +146,7 @@ acpi_ex_resolve_object_to_value(union acpi_operand_object **stack_ptr, stack_desc = *stack_ptr; - /* This is an union acpi_operand_object */ + /* This is a union acpi_operand_object */ switch (ACPI_GET_OBJECT_TYPE(stack_desc)) { case ACPI_TYPE_LOCAL_REFERENCE: diff --git a/drivers/acpi/executer/exstore.c b/drivers/acpi/executer/exstore.c index 3318df4cbd98..1c118ba78adb 100644 --- a/drivers/acpi/executer/exstore.c +++ b/drivers/acpi/executer/exstore.c @@ -274,7 +274,7 @@ acpi_ex_do_debug_object(union acpi_operand_object *source_desc, * * PARAMETERS: *source_desc - Value to be stored * *dest_desc - Where to store it. Must be an NS node - * or an union acpi_operand_object of type + * or a union acpi_operand_object of type * Reference; * walk_state - Current walk state * diff --git a/drivers/acpi/resources/rscreate.c b/drivers/acpi/resources/rscreate.c index c0bbfa2c4193..08b8d73e6ee5 100644 --- a/drivers/acpi/resources/rscreate.c +++ b/drivers/acpi/resources/rscreate.c @@ -124,7 +124,7 @@ acpi_rs_create_resource_list(union acpi_operand_object *aml_buffer, * * FUNCTION: acpi_rs_create_pci_routing_table * - * PARAMETERS: package_object - Pointer to an union acpi_operand_object + * PARAMETERS: package_object - Pointer to a union acpi_operand_object * package * output_buffer - Pointer to the user's buffer * diff --git a/drivers/acpi/utilities/utobject.c b/drivers/acpi/utilities/utobject.c index c354e7a42bcd..4bef3cfbaccb 100644 --- a/drivers/acpi/utilities/utobject.c +++ b/drivers/acpi/utilities/utobject.c @@ -297,7 +297,7 @@ union acpi_operand_object *acpi_ut_create_string_object(acpi_size string_size) * * RETURN: TRUE if object is valid, FALSE otherwise * - * DESCRIPTION: Validate a pointer to be an union acpi_operand_object + * DESCRIPTION: Validate a pointer to be a union acpi_operand_object * ******************************************************************************/ @@ -389,7 +389,7 @@ void acpi_ut_delete_object_desc(union acpi_operand_object *object) { ACPI_FUNCTION_TRACE_PTR(ut_delete_object_desc, object); - /* Object must be an union acpi_operand_object */ + /* Object must be a union acpi_operand_object */ if (ACPI_GET_DESCRIPTOR_TYPE(object) != ACPI_DESC_TYPE_OPERAND) { ACPI_ERROR((AE_INFO, diff --git a/drivers/base/Kconfig b/drivers/base/Kconfig index d8e8c49c0cbd..8f006f96ff53 100644 --- a/drivers/base/Kconfig +++ b/drivers/base/Kconfig @@ -54,7 +54,7 @@ config FIRMWARE_IN_KERNEL such firmware, and do not wish to use an initrd. This single option controls the inclusion of firmware for - every driver which uses request_firmare() and ships its + every driver which uses request_firmware() and ships its firmware in the kernel source tree, to avoid a proliferation of 'Include firmware for xxx device' options. diff --git a/drivers/char/epca.c b/drivers/char/epca.c index 39ad820b2350..af7c13ca9493 100644 --- a/drivers/char/epca.c +++ b/drivers/char/epca.c @@ -769,7 +769,7 @@ static int pc_open(struct tty_struct *tty, struct file *filp) /* Check status of board configured in system. */ /* - * I check to see if the epca_setup routine detected an user error. It + * I check to see if the epca_setup routine detected a user error. It * might be better to put this in pc_init, but for the moment it goes * here. */ diff --git a/drivers/cpufreq/Kconfig b/drivers/cpufreq/Kconfig index 5f076aef74fa..a8c8d9c19d74 100644 --- a/drivers/cpufreq/Kconfig +++ b/drivers/cpufreq/Kconfig @@ -83,7 +83,7 @@ config CPU_FREQ_DEFAULT_GOV_USERSPACE select CPU_FREQ_GOV_USERSPACE help Use the CPUFreq governor 'userspace' as default. This allows - you to set the CPU frequency manually or when an userspace + you to set the CPU frequency manually or when a userspace program shall be able to set the CPU dynamically without having to enable the userspace governor manually. @@ -138,7 +138,7 @@ config CPU_FREQ_GOV_USERSPACE tristate "'userspace' governor for userspace frequency scaling" help Enable this cpufreq governor when you either want to set the - CPU frequency manually or when an userspace program shall + CPU frequency manually or when a userspace program shall be able to set the CPU dynamically, like on LART <http://www.lartmaker.nl/>. diff --git a/drivers/hwmon/fschmd.c b/drivers/hwmon/fschmd.c index 967170368933..8b2d756595d9 100644 --- a/drivers/hwmon/fschmd.c +++ b/drivers/hwmon/fschmd.c @@ -75,7 +75,7 @@ static const u8 FSCHMD_REG_VOLT[3] = { 0x45, 0x42, 0x48 }; /* minimum pwm at which the fan is driven (pwm can by increased depending on the temp. Notice that for the scy some fans share there minimum speed. - Also notice that with the scy the sensor order is different then with the + Also notice that with the scy the sensor order is different than with the other chips, this order was in the 2.4 driver and kept for consistency. */ static const u8 FSCHMD_REG_FAN_MIN[5][6] = { { 0x55, 0x65 }, /* pos */ diff --git a/drivers/infiniband/hw/mlx4/cq.c b/drivers/infiniband/hw/mlx4/cq.c index a3c5af1d7ec0..de5263beab4a 100644 --- a/drivers/infiniband/hw/mlx4/cq.c +++ b/drivers/infiniband/hw/mlx4/cq.c @@ -367,7 +367,7 @@ int mlx4_ib_resize_cq(struct ib_cq *ibcq, int entries, struct ib_udata *udata) if (err) goto out; } else { - /* Can't be smaller then the number of outstanding CQEs */ + /* Can't be smaller than the number of outstanding CQEs */ outst_cqe = mlx4_ib_get_outstanding_cqes(cq); if (entries < outst_cqe + 1) { err = 0; diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c index f6e9f39a527b..c3c8b9bc40ae 100644 --- a/drivers/input/keyboard/atkbd.c +++ b/drivers/input/keyboard/atkbd.c @@ -65,7 +65,7 @@ MODULE_PARM_DESC(extra, "Enable extra LEDs and keys on IBM RapidAcces, EzKey and /* * Scancode to keycode tables. These are just the default setting, and - * are loadable via an userland utility. + * are loadable via a userland utility. */ static const unsigned short atkbd_set2_keycode[512] = { diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig index b52659620d50..173cf55c64d0 100644 --- a/drivers/macintosh/Kconfig +++ b/drivers/macintosh/Kconfig @@ -138,7 +138,7 @@ config PMAC_BACKLIGHT Say Y here to enable Macintosh specific extensions of the generic backlight code. With this enabled, the brightness keys on older PowerBooks will be enabled so you can change the screen brightness. - Newer models should use an userspace daemon like pbbuttonsd. + Newer models should use a userspace daemon like pbbuttonsd. config PMAC_BACKLIGHT_LEGACY bool "Provide legacy ioctl's on /dev/pmu for the backlight" diff --git a/drivers/message/i2o/i2o_scsi.c b/drivers/message/i2o/i2o_scsi.c index 1bcdbbb9e7d3..3d45817e6dcd 100644 --- a/drivers/message/i2o/i2o_scsi.c +++ b/drivers/message/i2o/i2o_scsi.c @@ -390,7 +390,7 @@ static int i2o_scsi_reply(struct i2o_controller *c, u32 m, * @i2o_dev: the I2O device which was added * * If a I2O device is added we catch the notification, because I2O classes - * other then SCSI peripheral will not be received through + * other than SCSI peripheral will not be received through * i2o_scsi_probe(). */ static void i2o_scsi_notify_device_add(struct i2o_device *i2o_dev) diff --git a/drivers/misc/ibmasm/event.c b/drivers/misc/ibmasm/event.c index fda6a4d3bf23..68a0a5b94795 100644 --- a/drivers/misc/ibmasm/event.c +++ b/drivers/misc/ibmasm/event.c @@ -50,7 +50,7 @@ static void wake_up_event_readers(struct service_processor *sp) * Store the event in the circular event buffer, wake up any sleeping * event readers. * There is no reader marker in the buffer, therefore readers are - * responsible for keeping up with the writer, or they will loose events. + * responsible for keeping up with the writer, or they will lose events. */ void ibmasm_receive_event(struct service_processor *sp, void *data, unsigned int data_size) { diff --git a/drivers/misc/phantom.c b/drivers/misc/phantom.c index abdebe347383..fa57b67593ae 100644 --- a/drivers/misc/phantom.c +++ b/drivers/misc/phantom.c @@ -6,7 +6,7 @@ * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * - * You need an userspace library to cooperate with this driver. It (and other + * You need a userspace library to cooperate with this driver. It (and other * info) may be obtained here: * http://www.fi.muni.cz/~xslaby/phantom.html * or alternatively, you might use OpenHaptics provided by Sensable. diff --git a/drivers/mtd/devices/pmc551.c b/drivers/mtd/devices/pmc551.c index d38bca64bb15..d2fd550f7e09 100644 --- a/drivers/mtd/devices/pmc551.c +++ b/drivers/mtd/devices/pmc551.c @@ -34,7 +34,7 @@ * aperture size, not the dram size, and the V370PDC supplies no * other method for memory size discovery. This problem is * mostly only relevant when compiled as a module, as the - * unloading of the module with an aperture size smaller then + * unloading of the module with an aperture size smaller than * the ram will cause the driver to detect the onboard memory * size to be equal to the aperture size when the module is * reloaded. Soooo, to help, the module supports an msize diff --git a/drivers/mtd/ubi/eba.c b/drivers/mtd/ubi/eba.c index 048a606cebde..25def348e5ba 100644 --- a/drivers/mtd/ubi/eba.c +++ b/drivers/mtd/ubi/eba.c @@ -717,7 +717,7 @@ write_error: * to the real data size, although the @buf buffer has to contain the * alignment. In all other cases, @len has to be aligned. * - * It is prohibited to write more then once to logical eraseblocks of static + * It is prohibited to write more than once to logical eraseblocks of static * volumes. This function returns zero in case of success and a negative error * code in case of failure. */ diff --git a/drivers/mtd/ubi/io.c b/drivers/mtd/ubi/io.c index a74118c05745..fe81039f2a7c 100644 --- a/drivers/mtd/ubi/io.c +++ b/drivers/mtd/ubi/io.c @@ -465,7 +465,7 @@ out: * This function synchronously erases physical eraseblock @pnum. If @torture * flag is not zero, the physical eraseblock is checked by means of writing * different patterns to it and reading them back. If the torturing is enabled, - * the physical eraseblock is erased more then once. + * the physical eraseblock is erased more than once. * * This function returns the number of erasures made in case of success, %-EIO * if the erasure failed or the torturing test failed, and other negative error diff --git a/drivers/mtd/ubi/scan.c b/drivers/mtd/ubi/scan.c index 41d47e1cf15c..ecde202a5a12 100644 --- a/drivers/mtd/ubi/scan.c +++ b/drivers/mtd/ubi/scan.c @@ -478,7 +478,7 @@ int ubi_scan_add_used(struct ubi_device *ubi, struct ubi_scan_info *si, return 0; } else { /* - * This logical eraseblock is older then the one found + * This logical eraseblock is older than the one found * previously. */ if (cmp_res & 4) diff --git a/drivers/mtd/ubi/ubi-media.h b/drivers/mtd/ubi/ubi-media.h index 2ad940409053..8419fdccc79c 100644 --- a/drivers/mtd/ubi/ubi-media.h +++ b/drivers/mtd/ubi/ubi-media.h @@ -135,7 +135,7 @@ enum { * The erase counter header takes 64 bytes and has a plenty of unused space for * future usage. The unused fields are zeroed. The @version field is used to * indicate the version of UBI implementation which is supposed to be able to - * work with this UBI image. If @version is greater then the current UBI + * work with this UBI image. If @version is greater than the current UBI * version, the image is rejected. This may be useful in future if something * is changed radically. This field is duplicated in the volume identifier * header. @@ -187,7 +187,7 @@ struct ubi_ec_hdr { * (sequence number) is used to distinguish between older and newer versions of * logical eraseblocks. * - * There are 2 situations when there may be more then one physical eraseblock + * There are 2 situations when there may be more than one physical eraseblock * corresponding to the same logical eraseblock, i.e., having the same @vol_id * and @lnum values in the volume identifier header. Suppose we have a logical * eraseblock L and it is mapped to the physical eraseblock P. diff --git a/drivers/mtd/ubi/vtbl.c b/drivers/mtd/ubi/vtbl.c index 333c8941552f..1afc61e7455d 100644 --- a/drivers/mtd/ubi/vtbl.c +++ b/drivers/mtd/ubi/vtbl.c @@ -577,7 +577,7 @@ static int init_volumes(struct ubi_device *ubi, const struct ubi_scan_info *si, if (vtbl[i].flags & UBI_VTBL_AUTORESIZE_FLG) { /* Auto re-size flag may be set only for one volume */ if (ubi->autoresize_vol_id != -1) { - ubi_err("more then one auto-resize volume (%d " + ubi_err("more than one auto-resize volume (%d " "and %d)", ubi->autoresize_vol_id, i); kfree(vol); return -EINVAL; diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c index 14901cb82c18..891534f8210d 100644 --- a/drivers/mtd/ubi/wl.c +++ b/drivers/mtd/ubi/wl.c @@ -128,7 +128,7 @@ * situation when the picked physical eraseblock is constantly erased after the * data is written to it. So, we have a constant which limits the highest erase * counter of the free physical eraseblock to pick. Namely, the WL sub-system - * does not pick eraseblocks with erase counter greater then the lowest erase + * does not pick eraseblocks with erase counter greater than the lowest erase * counter plus %WL_FREE_MAX_DIFF. */ #define WL_FREE_MAX_DIFF (2*UBI_WL_THRESHOLD) @@ -917,7 +917,7 @@ static int ensure_wear_leveling(struct ubi_device *ubi) /* * We schedule wear-leveling only if the difference between the * lowest erase counter of used physical eraseblocks and a high - * erase counter of free physical eraseblocks is greater then + * erase counter of free physical eraseblocks is greater than * %UBI_WL_THRESHOLD. */ e1 = rb_entry(rb_first(&ubi->used), struct ubi_wl_entry, u.rb); diff --git a/drivers/net/bnx2x_link.c b/drivers/net/bnx2x_link.c index 67de94f1f30e..fefa6ab13064 100644 --- a/drivers/net/bnx2x_link.c +++ b/drivers/net/bnx2x_link.c @@ -3359,7 +3359,7 @@ static u8 bnx2x_format_ver(u32 num, u8 *str, u16 len) u8 shift = 8*4; u8 digit; if (len < 10) { - /* Need more then 10chars for this format */ + /* Need more than 10chars for this format */ *str_ptr = '\0'; return -EINVAL; } diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c index d04eef53571e..e1a3fc1303ee 100644 --- a/drivers/net/e1000/e1000_hw.c +++ b/drivers/net/e1000/e1000_hw.c @@ -6758,7 +6758,7 @@ static s32 e1000_get_cable_length(struct e1000_hw *hw, u16 *min_length, * returns: - E1000_ERR_XXX * E1000_SUCCESS * - * For phy's older then IGP, this function simply reads the polarity bit in the + * For phy's older than IGP, this function simply reads the polarity bit in the * Phy Status register. For IGP phy's, this bit is valid only if link speed is * 10 Mbps. If the link speed is 100 Mbps there is no polarity so this bit will * return 0. If the link speed is 1000 Mbps the polarity status is in the @@ -6834,7 +6834,7 @@ static s32 e1000_check_polarity(struct e1000_hw *hw, * returns: - E1000_ERR_XXX * E1000_SUCCESS * - * For phy's older then IGP, this function reads the Downshift bit in the Phy + * For phy's older than IGP, this function reads the Downshift bit in the Phy * Specific Status register. For IGP phy's, it reads the Downgrade bit in the * Link Health register. In IGP this bit is latched high, so the driver must * read it immediately after link is established. diff --git a/drivers/net/slip.h b/drivers/net/slip.h index 853e0f6ec710..9ea5c11287d2 100644 --- a/drivers/net/slip.h +++ b/drivers/net/slip.h @@ -75,7 +75,7 @@ struct slip { unsigned long tx_errors; /* Planned stuff */ unsigned long rx_dropped; /* No memory for skb */ unsigned long tx_dropped; /* When MTU change */ - unsigned long rx_over_errors; /* Frame bigger then SLIP buf. */ + unsigned long rx_over_errors; /* Frame bigger than SLIP buf. */ #ifdef SL_INCLUDE_CSLIP unsigned long tx_compressed; unsigned long rx_compressed; diff --git a/drivers/net/tehuti.c b/drivers/net/tehuti.c index a10a83a11d9f..a7a4dc4d6313 100644 --- a/drivers/net/tehuti.c +++ b/drivers/net/tehuti.c @@ -1004,7 +1004,7 @@ static inline void bdx_rxdb_free_elem(struct rxdb *db, int n) * skb for rx. It assumes that Rx is desabled in HW * funcs are grouped for better cache usage * - * RxD fifo is smaller then RxF fifo by design. Upon high load, RxD will be + * RxD fifo is smaller than RxF fifo by design. Upon high load, RxD will be * filled and packets will be dropped by nic without getting into host or * cousing interrupt. Anyway, in that condition, host has no chance to proccess * all packets, but dropping in nic is cheaper, since it takes 0 cpu cycles @@ -1826,7 +1826,7 @@ static void bdx_tx_free(struct bdx_priv *priv) * * Pushes desc to TxD fifo and overlaps it if needed. * NOTE: this func does not check for available space. this is responsibility - * of the caller. Neither does it check that data size is smaller then + * of the caller. Neither does it check that data size is smaller than * fifo size. */ static void bdx_tx_push_desc(struct bdx_priv *priv, void *data, int size) diff --git a/drivers/net/tokenring/smctr.c b/drivers/net/tokenring/smctr.c index a011666342ff..50eb29ce3c87 100644 --- a/drivers/net/tokenring/smctr.c +++ b/drivers/net/tokenring/smctr.c @@ -3064,7 +3064,7 @@ static int smctr_load_node_addr(struct net_device *dev) * will consequently cause a timeout. * * NOTE 1: If the monitor_state is MS_BEACON_TEST_STATE, all transmit - * queues other then the one used for the lobe_media_test should be + * queues other than the one used for the lobe_media_test should be * disabled.!? * * NOTE 2: If the monitor_state is MS_BEACON_TEST_STATE and the receive_mask diff --git a/drivers/net/wireless/atmel.c b/drivers/net/wireless/atmel.c index 350157fcd080..4223672c4432 100644 --- a/drivers/net/wireless/atmel.c +++ b/drivers/net/wireless/atmel.c @@ -3836,7 +3836,7 @@ static int reset_atmel_card(struct net_device *dev) This routine is also responsible for initialising some hardware-specific fields in the atmel_private structure, including a copy of the firmware's hostinfo stucture - which is the route into the rest of the firmare datastructures. */ + which is the route into the rest of the firmware datastructures. */ struct atmel_private *priv = netdev_priv(dev); u8 configuration; diff --git a/drivers/net/wireless/ipw2x00/ipw2100.c b/drivers/net/wireless/ipw2x00/ipw2100.c index 1667065b86a7..823c2bf5e31e 100644 --- a/drivers/net/wireless/ipw2x00/ipw2100.c +++ b/drivers/net/wireless/ipw2x00/ipw2100.c @@ -1332,7 +1332,7 @@ static int ipw2100_power_cycle_adapter(struct ipw2100_priv *priv) IPW_AUX_HOST_RESET_REG_STOP_MASTER); /* Step 2. Wait for stop Master Assert - * (not more then 50us, otherwise ret error */ + * (not more than 50us, otherwise ret error */ i = 5; do { udelay(IPW_WAIT_RESET_MASTER_ASSERT_COMPLETE_DELAY); @@ -1830,7 +1830,7 @@ static void ipw2100_down(struct ipw2100_priv *priv) cancel_delayed_work(&priv->rf_kill); } - /* Kill the firmare hang check timer */ + /* Kill the firmware hang check timer */ if (!priv->stop_hang_check) { priv->stop_hang_check = 1; cancel_delayed_work(&priv->hang_check); diff --git a/drivers/net/wireless/rt2x00/rt2x00crypto.c b/drivers/net/wireless/rt2x00/rt2x00crypto.c index 37ad0d2fb64c..aee9cba13eb3 100644 --- a/drivers/net/wireless/rt2x00/rt2x00crypto.c +++ b/drivers/net/wireless/rt2x00/rt2x00crypto.c @@ -184,8 +184,8 @@ void rt2x00crypto_rx_insert_iv(struct sk_buff *skb, unsigned int align, * Make room for new data, note that we increase both * headsize and tailsize when required. The tailsize is * only needed when ICV data needs to be inserted and - * the padding is smaller then the ICV data. - * When alignment requirements is greater then the + * the padding is smaller than the ICV data. + * When alignment requirements is greater than the * ICV data we must trim the skb to the correct size * because we need to remove the extra bytes. */ diff --git a/drivers/net/wireless/strip.c b/drivers/net/wireless/strip.c index dd0de3a9ed4e..7015f2480550 100644 --- a/drivers/net/wireless/strip.c +++ b/drivers/net/wireless/strip.c @@ -236,7 +236,7 @@ struct strip { unsigned long tx_errors; /* Planned stuff */ unsigned long rx_dropped; /* No memory for skb */ unsigned long tx_dropped; /* When MTU change */ - unsigned long rx_over_errors; /* Frame bigger then STRIP buf. */ + unsigned long rx_over_errors; /* Frame bigger than STRIP buf. */ unsigned long pps_timer; /* Timer to determine pps */ unsigned long rx_pps_count; /* Counter to determine pps */ diff --git a/drivers/rtc/rtc-ds1511.c b/drivers/rtc/rtc-ds1511.c index 23a07fe15a2c..0b6b7730c716 100644 --- a/drivers/rtc/rtc-ds1511.c +++ b/drivers/rtc/rtc-ds1511.c @@ -630,7 +630,7 @@ ds1511_rtc_init(void) static void __exit ds1511_rtc_exit(void) { - return platform_driver_unregister(&ds1511_rtc_driver); + platform_driver_unregister(&ds1511_rtc_driver); } module_init(ds1511_rtc_init); diff --git a/drivers/rtc/rtc-stk17ta8.c b/drivers/rtc/rtc-stk17ta8.c index dc0b6224ad9b..7d1547b0070e 100644 --- a/drivers/rtc/rtc-stk17ta8.c +++ b/drivers/rtc/rtc-stk17ta8.c @@ -399,7 +399,7 @@ static __init int stk17ta8_init(void) static __exit void stk17ta8_exit(void) { - return platform_driver_unregister(&stk17ta8_rtc_driver); + platform_driver_unregister(&stk17ta8_rtc_driver); } module_init(stk17ta8_init); diff --git a/drivers/s390/block/dasd_eer.c b/drivers/s390/block/dasd_eer.c index 892e2878d61b..f8e05ce98621 100644 --- a/drivers/s390/block/dasd_eer.c +++ b/drivers/s390/block/dasd_eer.c @@ -535,8 +535,8 @@ static int dasd_eer_open(struct inode *inp, struct file *filp) eerb->buffer_page_count > INT_MAX / PAGE_SIZE) { kfree(eerb); MESSAGE(KERN_WARNING, "can't open device since module " - "parameter eer_pages is smaller then 1 or" - " bigger then %d", (int)(INT_MAX / PAGE_SIZE)); + "parameter eer_pages is smaller than 1 or" + " bigger than %d", (int)(INT_MAX / PAGE_SIZE)); unlock_kernel(); return -EINVAL; } diff --git a/drivers/s390/char/vmlogrdr.c b/drivers/s390/char/vmlogrdr.c index aabbeb909cc6..d8a2289fcb69 100644 --- a/drivers/s390/char/vmlogrdr.c +++ b/drivers/s390/char/vmlogrdr.c @@ -427,7 +427,7 @@ static int vmlogrdr_receive_data(struct vmlogrdr_priv_t *priv) buffer = priv->buffer + sizeof(int); } /* - * If the record is bigger then our buffer, we receive only + * If the record is bigger than our buffer, we receive only * a part of it. We can get the rest later. */ if (iucv_data_count > NET_BUFFER_SIZE) @@ -437,7 +437,7 @@ static int vmlogrdr_receive_data(struct vmlogrdr_priv_t *priv) 0, buffer, iucv_data_count, &priv->residual_length); spin_unlock_bh(&priv->priv_lock); - /* An rc of 5 indicates that the record was bigger then + /* An rc of 5 indicates that the record was bigger than * the buffer, which is OK for us. A 9 indicates that the * record was purged befor we could receive it. */ diff --git a/drivers/scsi/a100u2w.c b/drivers/scsi/a100u2w.c index 3c298c7253ee..964769f66eac 100644 --- a/drivers/scsi/a100u2w.c +++ b/drivers/scsi/a100u2w.c @@ -633,7 +633,7 @@ static int orc_device_reset(struct orc_host * host, struct scsi_cmnd *cmd, unsig return FAILED; } - /* Reset device is handled by the firmare, we fill in an SCB and + /* Reset device is handled by the firmware, we fill in an SCB and fire it at the controller, it does the rest */ scb->opcode = ORC_BUSDEVRST; scb->target = target; diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c index 8c64494444bf..311ed6dea726 100644 --- a/drivers/scsi/lpfc/lpfc_hbadisc.c +++ b/drivers/scsi/lpfc/lpfc_hbadisc.c @@ -1964,10 +1964,10 @@ lpfc_set_disctmo(struct lpfc_vport *vport) uint32_t tmo; if (vport->port_state == LPFC_LOCAL_CFG_LINK) { - /* For FAN, timeout should be greater then edtov */ + /* For FAN, timeout should be greater than edtov */ tmo = (((phba->fc_edtov + 999) / 1000) + 1); } else { - /* Normal discovery timeout should be > then ELS/CT timeout + /* Normal discovery timeout should be > than ELS/CT timeout * FC spec states we need 3 * ratov for CT requests */ tmo = ((phba->fc_ratov * 3) + 3); diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index 01dfdc8696f8..a36a120561e2 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -420,7 +420,7 @@ lpfc_sli_next_iocb_slot (struct lpfc_hba *phba, struct lpfc_sli_ring *pring) if (unlikely(pring->local_getidx >= max_cmd_idx)) { lpfc_printf_log(phba, KERN_ERR, LOG_SLI, "0315 Ring %d issue: portCmdGet %d " - "is bigger then cmd ring %d\n", + "is bigger than cmd ring %d\n", pring->ringno, pring->local_getidx, max_cmd_idx); @@ -1628,12 +1628,12 @@ lpfc_sli_rsp_pointers_error(struct lpfc_hba *phba, struct lpfc_sli_ring *pring) { struct lpfc_pgp *pgp = &phba->port_gp[pring->ringno]; /* - * Ring <ringno> handler: portRspPut <portRspPut> is bigger then + * Ring <ringno> handler: portRspPut <portRspPut> is bigger than * rsp ring <portRspMax> */ lpfc_printf_log(phba, KERN_ERR, LOG_SLI, "0312 Ring %d handler: portRspPut %d " - "is bigger then rsp ring %d\n", + "is bigger than rsp ring %d\n", pring->ringno, le32_to_cpu(pgp->rspPutInx), pring->numRiocb); @@ -2083,12 +2083,12 @@ lpfc_sli_handle_slow_ring_event(struct lpfc_hba *phba, portRspPut = le32_to_cpu(pgp->rspPutInx); if (portRspPut >= portRspMax) { /* - * Ring <ringno> handler: portRspPut <portRspPut> is bigger then + * Ring <ringno> handler: portRspPut <portRspPut> is bigger than * rsp ring <portRspMax> */ lpfc_printf_log(phba, KERN_ERR, LOG_SLI, "0303 Ring %d handler: portRspPut %d " - "is bigger then rsp ring %d\n", + "is bigger than rsp ring %d\n", pring->ringno, portRspPut, portRspMax); phba->link_state = LPFC_HBA_ERROR; diff --git a/drivers/scsi/megaraid.c b/drivers/scsi/megaraid.c index 7dc62deb4087..9fdcd60c5493 100644 --- a/drivers/scsi/megaraid.c +++ b/drivers/scsi/megaraid.c @@ -1967,8 +1967,8 @@ megaraid_abort_and_reset(adapter_t *adapter, Scsi_Cmnd *cmd, int aor) scb->state |= aor; /* - * Check if this command has firmare owenership. If - * yes, we cannot reset this command. Whenever, f/w + * Check if this command has firmware ownership. If + * yes, we cannot reset this command. Whenever f/w * completes this command, we will return appropriate * status from ISR. */ diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c index 8cb9240596ab..df09820e8916 100644 --- a/drivers/scsi/qla1280.c +++ b/drivers/scsi/qla1280.c @@ -128,7 +128,7 @@ - Integrate ql12160_set_target_parameters() with 1280 version - Make qla1280_setup() non static - Do not call qla1280_check_for_dead_scsi_bus() on every I/O request - sent to the card - this command pauses the firmare!!! + sent to the card - this command pauses the firmware!!! Rev 3.23.15 Beta March 19, 2002, Jes Sorensen - Clean up qla1280.h - remove obsolete QL_DEBUG_LEVEL_x definitions - Remove a pile of pointless and confusing (srb_t **) and @@ -659,7 +659,7 @@ static int qla1280_read_nvram(struct scsi_qla_host *ha) /* The firmware interface is, um, interesting, in that the * actual firmware image on the chip is little endian, thus, * the process of taking that image to the CPU would end up - * little endian. However, the firmare interface requires it + * little endian. However, the firmware interface requires it * to be read a word (two bytes) at a time. * * The net result of this would be that the word (and diff --git a/drivers/scsi/qla4xxx/ql4_mbx.c b/drivers/scsi/qla4xxx/ql4_mbx.c index c577d79bd7e8..051b0f5e8c8e 100644 --- a/drivers/scsi/qla4xxx/ql4_mbx.c +++ b/drivers/scsi/qla4xxx/ql4_mbx.c @@ -392,7 +392,7 @@ int qla4xxx_get_firmware_status(struct scsi_qla_host * ha) ha->iocb_hiwat -= IOCB_HIWAT_CUSHION; else dev_info(&ha->pdev->dev, "WARNING!!! You have less than %d " - "firmare IOCBs available (%d).\n", + "firmware IOCBs available (%d).\n", IOCB_HIWAT_CUSHION, ha->iocb_hiwat); return QLA_SUCCESS; diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c index 381838ebd460..d86ebea9350a 100644 --- a/drivers/scsi/scsi_error.c +++ b/drivers/scsi/scsi_error.c @@ -1650,7 +1650,7 @@ int scsi_error_handler(void *data) * We use TASK_INTERRUPTIBLE so that the thread is not * counted against the load average as a running process. * We never actually get interrupted because kthread_run - * disables singal delivery for the created thread. + * disables signal delivery for the created thread. */ set_current_state(TASK_INTERRUPTIBLE); while (!kthread_should_stop()) { diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index daa00567bc44..1889a63ebc22 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -3123,7 +3123,7 @@ static int __init serial8250_init(void) if (nr_uarts > UART_NR) nr_uarts = UART_NR; - printk(KERN_INFO "Serial: 8250/16550 driver" + printk(KERN_INFO "Serial: 8250/16550 driver, " "%d ports, IRQ sharing %sabled\n", nr_uarts, share_irqs ? "en" : "dis"); diff --git a/drivers/serial/crisv10.c b/drivers/serial/crisv10.c index 8b2c619a09f2..e642c22c80e2 100644 --- a/drivers/serial/crisv10.c +++ b/drivers/serial/crisv10.c @@ -1203,7 +1203,7 @@ static void e100_disable_txdma_channel(struct e100_serial *info) unsigned long flags; /* Disable output DMA channel for the serial port in question - * ( set to something other then serialX) + * ( set to something other than serialX) */ local_irq_save(flags); DFLOW(DEBUG_LOG(info->line, "disable_txdma_channel %i\n", info->line)); @@ -1266,7 +1266,7 @@ static void e100_disable_rxdma_channel(struct e100_serial *info) unsigned long flags; /* Disable input DMA channel for the serial port in question - * ( set to something other then serialX) + * ( set to something other than serialX) */ local_irq_save(flags); if (info->line == 0) { diff --git a/drivers/uwb/i1480/dfu/usb.c b/drivers/uwb/i1480/dfu/usb.c index 686795e97195..c7080d497311 100644 --- a/drivers/uwb/i1480/dfu/usb.c +++ b/drivers/uwb/i1480/dfu/usb.c @@ -387,7 +387,7 @@ int i1480_usb_probe(struct usb_interface *iface, const struct usb_device_id *id) goto error_create; } - /* setup the fops and upload the firmare */ + /* setup the fops and upload the firmware */ i1480->pre_fw_name = "i1480-pre-phy-0.0.bin"; i1480->mac_fw_name = "i1480-usb-0.0.bin"; i1480->mac_fw_name_deprecate = "ptc-0.0.bin"; diff --git a/drivers/video/console/vgacon.c b/drivers/video/console/vgacon.c index e6210725b9ab..d012edda6d11 100644 --- a/drivers/video/console/vgacon.c +++ b/drivers/video/console/vgacon.c @@ -1332,7 +1332,7 @@ static void vgacon_save_screen(struct vc_data *c) c->vc_y = screen_info.orig_y; } - /* We can't copy in more then the size of the video buffer, + /* We can't copy in more than the size of the video buffer, * or we'll be copying in VGA BIOS */ if (!vga_is_gfx) |