summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/ide/pci/scc_pata.c61
1 files changed, 20 insertions, 41 deletions
diff --git a/drivers/ide/pci/scc_pata.c b/drivers/ide/pci/scc_pata.c
index bf19ddfa6cda..eeb0a6d434aa 100644
--- a/drivers/ide/pci/scc_pata.c
+++ b/drivers/ide/pci/scc_pata.c
@@ -190,7 +190,7 @@ scc_ide_outsl(unsigned long port, void *addr, u32 count)
}
/**
- * scc_tuneproc - tune a drive PIO mode
+ * scc_tune_pio - tune a drive PIO mode
* @drive: drive to tune
* @mode_wanted: the target operating mode
*
@@ -198,7 +198,7 @@ scc_ide_outsl(unsigned long port, void *addr, u32 count)
* controller.
*/
-static void scc_tuneproc(ide_drive_t *drive, byte mode_wanted)
+static void scc_tune_pio(ide_drive_t *drive, const u8 pio)
{
ide_hwif_t *hwif = HWIF(drive);
struct scc_ports *ports = ide_get_hwifdata(hwif);
@@ -207,41 +207,25 @@ static void scc_tuneproc(ide_drive_t *drive, byte mode_wanted)
unsigned long piosht_port = ctl_base + 0x000;
unsigned long pioct_port = ctl_base + 0x004;
unsigned long reg;
- unsigned char speed = XFER_PIO_0;
int offset;
- mode_wanted = ide_get_best_pio_mode(drive, mode_wanted, 4);
- switch (mode_wanted) {
- case 4:
- speed = XFER_PIO_4;
- break;
- case 3:
- speed = XFER_PIO_3;
- break;
- case 2:
- speed = XFER_PIO_2;
- break;
- case 1:
- speed = XFER_PIO_1;
- break;
- case 0:
- default:
- speed = XFER_PIO_0;
- break;
- }
-
reg = in_be32((void __iomem *)cckctrl_port);
if (reg & CCKCTRL_ATACLKOEN) {
offset = 1; /* 133MHz */
} else {
offset = 0; /* 100MHz */
}
- reg = JCHSTtbl[offset][mode_wanted] << 16 | JCHHTtbl[offset][mode_wanted];
+ reg = JCHSTtbl[offset][pio] << 16 | JCHHTtbl[offset][pio];
out_be32((void __iomem *)piosht_port, reg);
- reg = JCHCTtbl[offset][mode_wanted];
+ reg = JCHCTtbl[offset][pio];
out_be32((void __iomem *)pioct_port, reg);
+}
- ide_config_drive_speed(drive, speed);
+static void scc_tuneproc(ide_drive_t *drive, u8 pio)
+{
+ pio = ide_get_best_pio_mode(drive, pio, 4);
+ scc_tune_pio(drive, pio);
+ ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
/**
@@ -280,26 +264,21 @@ static int scc_tune_chipset(ide_drive_t *drive, byte xferspeed)
switch (speed) {
case XFER_UDMA_6:
- idx = 6;
- break;
case XFER_UDMA_5:
- idx = 5;
- break;
case XFER_UDMA_4:
- idx = 4;
- break;
case XFER_UDMA_3:
- idx = 3;
- break;
case XFER_UDMA_2:
- idx = 2;
- break;
case XFER_UDMA_1:
- idx = 1;
- break;
case XFER_UDMA_0:
- idx = 0;
+ idx = speed - XFER_UDMA_0;
break;
+ case XFER_PIO_4:
+ case XFER_PIO_3:
+ case XFER_PIO_2:
+ case XFER_PIO_1:
+ case XFER_PIO_0:
+ scc_tune_pio(drive, speed - XFER_PIO_0);
+ return ide_config_drive_speed(drive, speed);
default:
return 1;
}
@@ -329,7 +308,7 @@ static int scc_tune_chipset(ide_drive_t *drive, byte xferspeed)
* required.
* If the drive isn't suitable for DMA or we hit other problems
* then we will drop down to PIO and set up PIO appropriately.
- * (return 1)
+ * (return -1)
*/
static int scc_config_drive_for_dma(ide_drive_t *drive)
@@ -338,7 +317,7 @@ static int scc_config_drive_for_dma(ide_drive_t *drive)
return 0;
if (ide_use_fast_pio(drive))
- scc_tuneproc(drive, 4);
+ scc_tuneproc(drive, 255);
return -1;
}