summaryrefslogtreecommitdiff
path: root/drivers/usb
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb')
-rw-r--r--drivers/usb/class/cdc-acm.c14
-rw-r--r--drivers/usb/class/cdc-acm.h1
-rw-r--r--drivers/usb/core/hub.c8
-rw-r--r--drivers/usb/serial/cp210x.c1
-rw-r--r--drivers/usb/serial/ftdi_sio.c1
-rw-r--r--drivers/usb/serial/ftdi_sio_ids.h1
-rw-r--r--drivers/usb/serial/mxu11x0.c20
-rw-r--r--drivers/usb/serial/option.c18
-rw-r--r--drivers/usb/serial/visor.c11
9 files changed, 68 insertions, 7 deletions
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 26ca4f910cb0..fa4e23930614 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -428,7 +428,8 @@ static void acm_read_bulk_callback(struct urb *urb)
set_bit(rb->index, &acm->read_urbs_free);
dev_dbg(&acm->data->dev, "%s - non-zero urb status: %d\n",
__func__, status);
- return;
+ if ((status != -ENOENT) || (urb->actual_length == 0))
+ return;
}
usb_mark_last_busy(acm->dev);
@@ -1404,6 +1405,8 @@ made_compressed_probe:
usb_sndbulkpipe(usb_dev, epwrite->bEndpointAddress),
NULL, acm->writesize, acm_write_bulk, snd);
snd->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+ if (quirks & SEND_ZERO_PACKET)
+ snd->urb->transfer_flags |= URB_ZERO_PACKET;
snd->instance = acm;
}
@@ -1838,6 +1841,11 @@ static const struct usb_device_id acm_ids[] = {
},
#endif
+ /*Samsung phone in firmware update mode */
+ { USB_DEVICE(0x04e8, 0x685d),
+ .driver_info = IGNORE_DEVICE,
+ },
+
/* Exclude Infineon Flash Loader utility */
{ USB_DEVICE(0x058b, 0x0041),
.driver_info = IGNORE_DEVICE,
@@ -1861,6 +1869,10 @@ static const struct usb_device_id acm_ids[] = {
{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM,
USB_CDC_ACM_PROTO_AT_CDMA) },
+ { USB_DEVICE(0x1519, 0x0452), /* Intel 7260 modem */
+ .driver_info = SEND_ZERO_PACKET,
+ },
+
{ }
};
diff --git a/drivers/usb/class/cdc-acm.h b/drivers/usb/class/cdc-acm.h
index dd9af38e7cda..ccfaba9ab4e4 100644
--- a/drivers/usb/class/cdc-acm.h
+++ b/drivers/usb/class/cdc-acm.h
@@ -134,3 +134,4 @@ struct acm {
#define IGNORE_DEVICE BIT(5)
#define QUIRK_CONTROL_LINE_STATE BIT(6)
#define CLEAR_HALT_CONDITIONS BIT(7)
+#define SEND_ZERO_PACKET BIT(8)
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 51b436918f78..350dcd9af5d8 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -5401,7 +5401,6 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
}
bos = udev->bos;
- udev->bos = NULL;
for (i = 0; i < SET_CONFIG_TRIES; ++i) {
@@ -5494,8 +5493,11 @@ done:
usb_set_usb2_hardware_lpm(udev, 1);
usb_unlocked_enable_lpm(udev);
usb_enable_ltm(udev);
- usb_release_bos_descriptor(udev);
- udev->bos = bos;
+ /* release the new BOS descriptor allocated by hub_port_init() */
+ if (udev->bos != bos) {
+ usb_release_bos_descriptor(udev);
+ udev->bos = bos;
+ }
return 0;
re_enumerate:
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 9b90ad747d87..987813b8a7f9 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -99,6 +99,7 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x10C4, 0x81AC) }, /* MSD Dash Hawk */
{ USB_DEVICE(0x10C4, 0x81AD) }, /* INSYS USB Modem */
{ USB_DEVICE(0x10C4, 0x81C8) }, /* Lipowsky Industrie Elektronik GmbH, Baby-JTAG */
+ { USB_DEVICE(0x10C4, 0x81D7) }, /* IAI Corp. RCB-CV-USB USB to RS485 Adaptor */
{ USB_DEVICE(0x10C4, 0x81E2) }, /* Lipowsky Industrie Elektronik GmbH, Baby-LIN */
{ USB_DEVICE(0x10C4, 0x81E7) }, /* Aerocomm Radio */
{ USB_DEVICE(0x10C4, 0x81E8) }, /* Zephyr Bioharness */
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index a5a0376bbd48..8c660ae401d8 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -824,6 +824,7 @@ static const struct usb_device_id id_table_combined[] = {
{ USB_DEVICE(FTDI_VID, FTDI_TURTELIZER_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) },
+ { USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_SCU18) },
{ USB_DEVICE(FTDI_VID, FTDI_REU_TINY_PID) },
/* Papouch devices based on FTDI chip */
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index 67c6d4469730..a84df2513994 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -615,6 +615,7 @@
*/
#define RATOC_VENDOR_ID 0x0584
#define RATOC_PRODUCT_ID_USB60F 0xb020
+#define RATOC_PRODUCT_ID_SCU18 0xb03a
/*
* Infineon Technologies
diff --git a/drivers/usb/serial/mxu11x0.c b/drivers/usb/serial/mxu11x0.c
index e3c3f57c2d82..619607323bfd 100644
--- a/drivers/usb/serial/mxu11x0.c
+++ b/drivers/usb/serial/mxu11x0.c
@@ -368,6 +368,16 @@ static int mxu1_port_probe(struct usb_serial_port *port)
return 0;
}
+static int mxu1_port_remove(struct usb_serial_port *port)
+{
+ struct mxu1_port *mxport;
+
+ mxport = usb_get_serial_port_data(port);
+ kfree(mxport);
+
+ return 0;
+}
+
static int mxu1_startup(struct usb_serial *serial)
{
struct mxu1_device *mxdev;
@@ -427,6 +437,14 @@ err_free_mxdev:
return err;
}
+static void mxu1_release(struct usb_serial *serial)
+{
+ struct mxu1_device *mxdev;
+
+ mxdev = usb_get_serial_data(serial);
+ kfree(mxdev);
+}
+
static int mxu1_write_byte(struct usb_serial_port *port, u32 addr,
u8 mask, u8 byte)
{
@@ -957,7 +975,9 @@ static struct usb_serial_driver mxu11x0_device = {
.id_table = mxu1_idtable,
.num_ports = 1,
.port_probe = mxu1_port_probe,
+ .port_remove = mxu1_port_remove,
.attach = mxu1_startup,
+ .release = mxu1_release,
.open = mxu1_open,
.close = mxu1_close,
.ioctl = mxu1_ioctl,
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index f2280606b73c..db86e512e0fc 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -268,6 +268,8 @@ static void option_instat_callback(struct urb *urb);
#define TELIT_PRODUCT_CC864_SINGLE 0x1006
#define TELIT_PRODUCT_DE910_DUAL 0x1010
#define TELIT_PRODUCT_UE910_V2 0x1012
+#define TELIT_PRODUCT_LE922_USBCFG0 0x1042
+#define TELIT_PRODUCT_LE922_USBCFG3 0x1043
#define TELIT_PRODUCT_LE920 0x1200
#define TELIT_PRODUCT_LE910 0x1201
@@ -615,6 +617,16 @@ static const struct option_blacklist_info telit_le920_blacklist = {
.reserved = BIT(1) | BIT(5),
};
+static const struct option_blacklist_info telit_le922_blacklist_usbcfg0 = {
+ .sendsetup = BIT(2),
+ .reserved = BIT(0) | BIT(1) | BIT(3),
+};
+
+static const struct option_blacklist_info telit_le922_blacklist_usbcfg3 = {
+ .sendsetup = BIT(0),
+ .reserved = BIT(1) | BIT(2) | BIT(3),
+};
+
static const struct usb_device_id option_ids[] = {
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) },
@@ -1160,6 +1172,10 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_CC864_SINGLE) },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_DE910_DUAL) },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UE910_V2) },
+ { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG0),
+ .driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg0 },
+ { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG3),
+ .driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg3 },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910),
.driver_info = (kernel_ulong_t)&telit_le910_blacklist },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920),
@@ -1679,7 +1695,7 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_EU3_P) },
{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PH8),
.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
- { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AHXX) },
+ { USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AHXX, 0xff) },
{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PLXX),
.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDM) },
diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c
index 60afb39eb73c..337a0be89fcf 100644
--- a/drivers/usb/serial/visor.c
+++ b/drivers/usb/serial/visor.c
@@ -544,6 +544,11 @@ static int treo_attach(struct usb_serial *serial)
(serial->num_interrupt_in == 0))
return 0;
+ if (serial->num_bulk_in < 2 || serial->num_interrupt_in < 2) {
+ dev_err(&serial->interface->dev, "missing endpoints\n");
+ return -ENODEV;
+ }
+
/*
* It appears that Treos and Kyoceras want to use the
* 1st bulk in endpoint to communicate with the 2nd bulk out endpoint,
@@ -597,8 +602,10 @@ static int clie_5_attach(struct usb_serial *serial)
*/
/* some sanity check */
- if (serial->num_ports < 2)
- return -1;
+ if (serial->num_bulk_out < 2) {
+ dev_err(&serial->interface->dev, "missing bulk out endpoints\n");
+ return -ENODEV;
+ }
/* port 0 now uses the modified endpoint Address */
port = serial->port[0];
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-13 20:44:49 +0000