summaryrefslogtreecommitdiff
path: root/drivers/usb/serial
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/serial')
-rw-r--r--drivers/usb/serial/cypress_m8.c7
-rw-r--r--drivers/usb/serial/ftdi_sio.c391
-rw-r--r--drivers/usb/serial/ftdi_sio.h28
3 files changed, 420 insertions, 6 deletions
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index e0035c023120..ed51bc48eea6 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -378,7 +378,7 @@ static int cypress_serial_control(struct tty_struct *tty,
retval = -ENOTTY;
goto out;
}
- dev_dbg(dev, "%s - retreiving serial line settings\n", __func__);
+ dev_dbg(dev, "%s - retrieving serial line settings\n", __func__);
do {
retval = usb_control_msg(port->serial->dev,
usb_rcvctrlpipe(port->serial->dev, 0),
@@ -769,7 +769,7 @@ send:
usb_fill_int_urb(port->interrupt_out_urb, port->serial->dev,
usb_sndintpipe(port->serial->dev, port->interrupt_out_endpointAddress),
- port->interrupt_out_buffer, port->interrupt_out_size,
+ port->interrupt_out_buffer, actual_size,
cypress_write_int_callback, port, priv->write_urb_interval);
result = usb_submit_urb(port->interrupt_out_urb, GFP_ATOMIC);
if (result) {
@@ -863,7 +863,7 @@ static void cypress_set_termios(struct tty_struct *tty,
struct cypress_private *priv = usb_get_serial_port_data(port);
struct device *dev = &port->dev;
int data_bits, stop_bits, parity_type, parity_enable;
- unsigned cflag, iflag;
+ unsigned int cflag;
unsigned long flags;
__u8 oldlines;
int linechange = 0;
@@ -899,7 +899,6 @@ static void cypress_set_termios(struct tty_struct *tty,
tty->termios.c_cflag &= ~(CMSPAR|CRTSCTS);
cflag = tty->termios.c_cflag;
- iflag = tty->termios.c_iflag;
/* check if there are new settings */
if (old_termios) {
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index b5cef322826f..f1eb20acb3bb 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -39,6 +39,7 @@
#include <linux/uaccess.h>
#include <linux/usb.h>
#include <linux/serial.h>
+#include <linux/gpio/driver.h>
#include <linux/usb/serial.h>
#include "ftdi_sio.h"
#include "ftdi_sio_ids.h"
@@ -72,6 +73,15 @@ struct ftdi_private {
unsigned int latency; /* latency setting in use */
unsigned short max_packet_size;
struct mutex cfg_lock; /* Avoid mess by parallel calls of config ioctl() and change_speed() */
+#ifdef CONFIG_GPIOLIB
+ struct gpio_chip gc;
+ struct mutex gpio_lock; /* protects GPIO state */
+ bool gpio_registered; /* is the gpiochip in kernel registered */
+ bool gpio_used; /* true if the user requested a gpio */
+ u8 gpio_altfunc; /* which pins are in gpio mode */
+ u8 gpio_output; /* pin directions cache */
+ u8 gpio_value; /* pin value for outputs */
+#endif
};
/* struct ftdi_sio_quirk is used by devices requiring special attention. */
@@ -1766,6 +1776,375 @@ static void remove_sysfs_attrs(struct usb_serial_port *port)
}
+#ifdef CONFIG_GPIOLIB
+
+static int ftdi_set_bitmode(struct usb_serial_port *port, u8 mode)
+{
+ struct ftdi_private *priv = usb_get_serial_port_data(port);
+ struct usb_serial *serial = port->serial;
+ int result;
+ u16 val;
+
+ val = (mode << 8) | (priv->gpio_output << 4) | priv->gpio_value;
+ result = usb_control_msg(serial->dev,
+ usb_sndctrlpipe(serial->dev, 0),
+ FTDI_SIO_SET_BITMODE_REQUEST,
+ FTDI_SIO_SET_BITMODE_REQUEST_TYPE, val,
+ priv->interface, NULL, 0, WDR_TIMEOUT);
+ if (result < 0) {
+ dev_err(&serial->interface->dev,
+ "bitmode request failed for value 0x%04x: %d\n",
+ val, result);
+ }
+
+ return result;
+}
+
+static int ftdi_set_cbus_pins(struct usb_serial_port *port)
+{
+ return ftdi_set_bitmode(port, FTDI_SIO_BITMODE_CBUS);
+}
+
+static int ftdi_exit_cbus_mode(struct usb_serial_port *port)
+{
+ struct ftdi_private *priv = usb_get_serial_port_data(port);
+
+ priv->gpio_output = 0;
+ priv->gpio_value = 0;
+ return ftdi_set_bitmode(port, FTDI_SIO_BITMODE_RESET);
+}
+
+static int ftdi_gpio_request(struct gpio_chip *gc, unsigned int offset)
+{
+ struct usb_serial_port *port = gpiochip_get_data(gc);
+ struct ftdi_private *priv = usb_get_serial_port_data(port);
+ int result;
+
+ if (priv->gpio_altfunc & BIT(offset))
+ return -ENODEV;
+
+ mutex_lock(&priv->gpio_lock);
+ if (!priv->gpio_used) {
+ /* Set default pin states, as we cannot get them from device */
+ priv->gpio_output = 0x00;
+ priv->gpio_value = 0x00;
+ result = ftdi_set_cbus_pins(port);
+ if (result) {
+ mutex_unlock(&priv->gpio_lock);
+ return result;
+ }
+
+ priv->gpio_used = true;
+ }
+ mutex_unlock(&priv->gpio_lock);
+
+ return 0;
+}
+
+static int ftdi_read_cbus_pins(struct usb_serial_port *port)
+{
+ struct ftdi_private *priv = usb_get_serial_port_data(port);
+ struct usb_serial *serial = port->serial;
+ unsigned char *buf;
+ int result;
+
+ buf = kmalloc(1, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ result = usb_control_msg(serial->dev,
+ usb_rcvctrlpipe(serial->dev, 0),
+ FTDI_SIO_READ_PINS_REQUEST,
+ FTDI_SIO_READ_PINS_REQUEST_TYPE, 0,
+ priv->interface, buf, 1, WDR_TIMEOUT);
+ if (result < 1) {
+ if (result >= 0)
+ result = -EIO;
+ } else {
+ result = buf[0];
+ }
+
+ kfree(buf);
+
+ return result;
+}
+
+static int ftdi_gpio_get(struct gpio_chip *gc, unsigned int gpio)
+{
+ struct usb_serial_port *port = gpiochip_get_data(gc);
+ int result;
+
+ result = ftdi_read_cbus_pins(port);
+ if (result < 0)
+ return result;
+
+ return !!(result & BIT(gpio));
+}
+
+static void ftdi_gpio_set(struct gpio_chip *gc, unsigned int gpio, int value)
+{
+ struct usb_serial_port *port = gpiochip_get_data(gc);
+ struct ftdi_private *priv = usb_get_serial_port_data(port);
+
+ mutex_lock(&priv->gpio_lock);
+
+ if (value)
+ priv->gpio_value |= BIT(gpio);
+ else
+ priv->gpio_value &= ~BIT(gpio);
+
+ ftdi_set_cbus_pins(port);
+
+ mutex_unlock(&priv->gpio_lock);
+}
+
+static int ftdi_gpio_get_multiple(struct gpio_chip *gc, unsigned long *mask,
+ unsigned long *bits)
+{
+ struct usb_serial_port *port = gpiochip_get_data(gc);
+ int result;
+
+ result = ftdi_read_cbus_pins(port);
+ if (result < 0)
+ return result;
+
+ *bits = result & *mask;
+
+ return 0;
+}
+
+static void ftdi_gpio_set_multiple(struct gpio_chip *gc, unsigned long *mask,
+ unsigned long *bits)
+{
+ struct usb_serial_port *port = gpiochip_get_data(gc);
+ struct ftdi_private *priv = usb_get_serial_port_data(port);
+
+ mutex_lock(&priv->gpio_lock);
+
+ priv->gpio_value &= ~(*mask);
+ priv->gpio_value |= *bits & *mask;
+ ftdi_set_cbus_pins(port);
+
+ mutex_unlock(&priv->gpio_lock);
+}
+
+static int ftdi_gpio_direction_get(struct gpio_chip *gc, unsigned int gpio)
+{
+ struct usb_serial_port *port = gpiochip_get_data(gc);
+ struct ftdi_private *priv = usb_get_serial_port_data(port);
+
+ return !(priv->gpio_output & BIT(gpio));
+}
+
+static int ftdi_gpio_direction_input(struct gpio_chip *gc, unsigned int gpio)
+{
+ struct usb_serial_port *port = gpiochip_get_data(gc);
+ struct ftdi_private *priv = usb_get_serial_port_data(port);
+ int result;
+
+ mutex_lock(&priv->gpio_lock);
+
+ priv->gpio_output &= ~BIT(gpio);
+ result = ftdi_set_cbus_pins(port);
+
+ mutex_unlock(&priv->gpio_lock);
+
+ return result;
+}
+
+static int ftdi_gpio_direction_output(struct gpio_chip *gc, unsigned int gpio,
+ int value)
+{
+ struct usb_serial_port *port = gpiochip_get_data(gc);
+ struct ftdi_private *priv = usb_get_serial_port_data(port);
+ int result;
+
+ mutex_lock(&priv->gpio_lock);
+
+ priv->gpio_output |= BIT(gpio);
+ if (value)
+ priv->gpio_value |= BIT(gpio);
+ else
+ priv->gpio_value &= ~BIT(gpio);
+
+ result = ftdi_set_cbus_pins(port);
+
+ mutex_unlock(&priv->gpio_lock);
+
+ return result;
+}
+
+static int ftdi_read_eeprom(struct usb_serial *serial, void *dst, u16 addr,
+ u16 nbytes)
+{
+ int read = 0;
+
+ if (addr % 2 != 0)
+ return -EINVAL;
+ if (nbytes % 2 != 0)
+ return -EINVAL;
+
+ /* Read EEPROM two bytes at a time */
+ while (read < nbytes) {
+ int rv;
+
+ rv = usb_control_msg(serial->dev,
+ usb_rcvctrlpipe(serial->dev, 0),
+ FTDI_SIO_READ_EEPROM_REQUEST,
+ FTDI_SIO_READ_EEPROM_REQUEST_TYPE,
+ 0, (addr + read) / 2, dst + read, 2,
+ WDR_TIMEOUT);
+ if (rv < 2) {
+ if (rv >= 0)
+ return -EIO;
+ else
+ return rv;
+ }
+
+ read += rv;
+ }
+
+ return 0;
+}
+
+static int ftdi_gpio_init_ft232r(struct usb_serial_port *port)
+{
+ struct ftdi_private *priv = usb_get_serial_port_data(port);
+ u16 cbus_config;
+ u8 *buf;
+ int ret;
+ int i;
+
+ buf = kmalloc(2, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ ret = ftdi_read_eeprom(port->serial, buf, 0x14, 2);
+ if (ret < 0)
+ goto out_free;
+
+ cbus_config = le16_to_cpup((__le16 *)buf);
+ dev_dbg(&port->dev, "cbus_config = 0x%04x\n", cbus_config);
+
+ priv->gc.ngpio = 4;
+
+ priv->gpio_altfunc = 0xff;
+ for (i = 0; i < priv->gc.ngpio; ++i) {
+ if ((cbus_config & 0xf) == FTDI_FT232R_CBUS_MUX_GPIO)
+ priv->gpio_altfunc &= ~BIT(i);
+ cbus_config >>= 4;
+ }
+out_free:
+ kfree(buf);
+
+ return ret;
+}
+
+static int ftdi_gpio_init_ftx(struct usb_serial_port *port)
+{
+ struct ftdi_private *priv = usb_get_serial_port_data(port);
+ struct usb_serial *serial = port->serial;
+ const u16 cbus_cfg_addr = 0x1a;
+ const u16 cbus_cfg_size = 4;
+ u8 *cbus_cfg_buf;
+ int result;
+ u8 i;
+
+ cbus_cfg_buf = kmalloc(cbus_cfg_size, GFP_KERNEL);
+ if (!cbus_cfg_buf)
+ return -ENOMEM;
+
+ result = ftdi_read_eeprom(serial, cbus_cfg_buf,
+ cbus_cfg_addr, cbus_cfg_size);
+ if (result < 0)
+ goto out_free;
+
+ /* FIXME: FT234XD alone has 1 GPIO, but how to recognize this IC? */
+ priv->gc.ngpio = 4;
+
+ /* Determine which pins are configured for CBUS bitbanging */
+ priv->gpio_altfunc = 0xff;
+ for (i = 0; i < priv->gc.ngpio; ++i) {
+ if (cbus_cfg_buf[i] == FTDI_FTX_CBUS_MUX_GPIO)
+ priv->gpio_altfunc &= ~BIT(i);
+ }
+
+out_free:
+ kfree(cbus_cfg_buf);
+
+ return result;
+}
+
+static int ftdi_gpio_init(struct usb_serial_port *port)
+{
+ struct ftdi_private *priv = usb_get_serial_port_data(port);
+ struct usb_serial *serial = port->serial;
+ int result;
+
+ switch (priv->chip_type) {
+ case FT232RL:
+ result = ftdi_gpio_init_ft232r(port);
+ break;
+ case FTX:
+ result = ftdi_gpio_init_ftx(port);
+ break;
+ default:
+ return 0;
+ }
+
+ if (result < 0)
+ return result;
+
+ mutex_init(&priv->gpio_lock);
+
+ priv->gc.label = "ftdi-cbus";
+ priv->gc.request = ftdi_gpio_request;
+ priv->gc.get_direction = ftdi_gpio_direction_get;
+ priv->gc.direction_input = ftdi_gpio_direction_input;
+ priv->gc.direction_output = ftdi_gpio_direction_output;
+ priv->gc.get = ftdi_gpio_get;
+ priv->gc.set = ftdi_gpio_set;
+ priv->gc.get_multiple = ftdi_gpio_get_multiple;
+ priv->gc.set_multiple = ftdi_gpio_set_multiple;
+ priv->gc.owner = THIS_MODULE;
+ priv->gc.parent = &serial->interface->dev;
+ priv->gc.base = -1;
+ priv->gc.can_sleep = true;
+
+ result = gpiochip_add_data(&priv->gc, port);
+ if (!result)
+ priv->gpio_registered = true;
+
+ return result;
+}
+
+static void ftdi_gpio_remove(struct usb_serial_port *port)
+{
+ struct ftdi_private *priv = usb_get_serial_port_data(port);
+
+ if (priv->gpio_registered) {
+ gpiochip_remove(&priv->gc);
+ priv->gpio_registered = false;
+ }
+
+ if (priv->gpio_used) {
+ /* Exiting CBUS-mode does not reset pin states. */
+ ftdi_exit_cbus_mode(port);
+ priv->gpio_used = false;
+ }
+}
+
+#else
+
+static int ftdi_gpio_init(struct usb_serial_port *port)
+{
+ return 0;
+}
+
+static void ftdi_gpio_remove(struct usb_serial_port *port) { }
+
+#endif /* CONFIG_GPIOLIB */
+
/*
* ***************************************************************************
* FTDI driver specific functions
@@ -1794,7 +2173,7 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port)
{
struct ftdi_private *priv;
const struct ftdi_sio_quirk *quirk = usb_get_serial_data(port->serial);
-
+ int result;
priv = kzalloc(sizeof(struct ftdi_private), GFP_KERNEL);
if (!priv)
@@ -1813,6 +2192,14 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port)
priv->latency = 16;
write_latency_timer(port);
create_sysfs_attrs(port);
+
+ result = ftdi_gpio_init(port);
+ if (result < 0) {
+ dev_err(&port->serial->interface->dev,
+ "GPIO initialisation failed: %d\n",
+ result);
+ }
+
return 0;
}
@@ -1930,6 +2317,8 @@ static int ftdi_sio_port_remove(struct usb_serial_port *port)
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
+ ftdi_gpio_remove(port);
+
remove_sysfs_attrs(port);
kfree(priv);
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index dcd0b6e05baf..a79a1325b4d9 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -35,7 +35,10 @@
#define FTDI_SIO_SET_EVENT_CHAR 6 /* Set the event character */
#define FTDI_SIO_SET_ERROR_CHAR 7 /* Set the error character */
#define FTDI_SIO_SET_LATENCY_TIMER 9 /* Set the latency timer */
-#define FTDI_SIO_GET_LATENCY_TIMER 10 /* Get the latency timer */
+#define FTDI_SIO_GET_LATENCY_TIMER 0x0a /* Get the latency timer */
+#define FTDI_SIO_SET_BITMODE 0x0b /* Set bitbang mode */
+#define FTDI_SIO_READ_PINS 0x0c /* Read immediate value of pins */
+#define FTDI_SIO_READ_EEPROM 0x90 /* Read EEPROM */
/* Interface indices for FT2232, FT2232H and FT4232H devices */
#define INTERFACE_A 1
@@ -433,6 +436,29 @@ enum ftdi_sio_baudrate {
* 1 = active
*/
+/* FTDI_SIO_SET_BITMODE */
+#define FTDI_SIO_SET_BITMODE_REQUEST_TYPE 0x40
+#define FTDI_SIO_SET_BITMODE_REQUEST FTDI_SIO_SET_BITMODE
+
+/* Possible bitmodes for FTDI_SIO_SET_BITMODE_REQUEST */
+#define FTDI_SIO_BITMODE_RESET 0x00
+#define FTDI_SIO_BITMODE_CBUS 0x20
+
+/* FTDI_SIO_READ_PINS */
+#define FTDI_SIO_READ_PINS_REQUEST_TYPE 0xc0
+#define FTDI_SIO_READ_PINS_REQUEST FTDI_SIO_READ_PINS
+
+/*
+ * FTDI_SIO_READ_EEPROM
+ *
+ * EEPROM format found in FTDI AN_201, "FT-X MTP memory Configuration",
+ * http://www.ftdichip.com/Support/Documents/AppNotes/AN_201_FT-X%20MTP%20Memory%20Configuration.pdf
+ */
+#define FTDI_SIO_READ_EEPROM_REQUEST_TYPE 0xc0
+#define FTDI_SIO_READ_EEPROM_REQUEST FTDI_SIO_READ_EEPROM
+
+#define FTDI_FTX_CBUS_MUX_GPIO 0x8
+#define FTDI_FT232R_CBUS_MUX_GPIO 0xa
/* Descriptors returned by the device
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-27 21:31:15 +0000