diff options
Diffstat (limited to 'drivers/tty/serial/fsl_lpuart.c')
| -rw-r--r-- | drivers/tty/serial/fsl_lpuart.c | 40 |
1 files changed, 23 insertions, 17 deletions
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c index f0252184291e..1c4d3f387138 100644 --- a/drivers/tty/serial/fsl_lpuart.c +++ b/drivers/tty/serial/fsl_lpuart.c @@ -1,12 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0+ /* * Freescale lpuart serial port driver * * Copyright 2012-2014 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. */ #if defined(CONFIG_SERIAL_FSL_LPUART_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) @@ -970,9 +966,9 @@ static void lpuart_dma_rx_complete(void *arg) lpuart_copy_rx_to_tty(sport); } -static void lpuart_timer_func(unsigned long data) +static void lpuart_timer_func(struct timer_list *t) { - struct lpuart_port *sport = (struct lpuart_port *)data; + struct lpuart_port *sport = from_timer(sport, t, lpuart_timer); lpuart_copy_rx_to_tty(sport); } @@ -1267,8 +1263,7 @@ static void lpuart32_setup_watermark(struct lpuart_port *sport) static void rx_dma_timer_init(struct lpuart_port *sport) { - setup_timer(&sport->lpuart_timer, lpuart_timer_func, - (unsigned long)sport); + timer_setup(&sport->lpuart_timer, lpuart_timer_func, 0); sport->lpuart_timer.expires = jiffies + sport->dma_rx_timeout; add_timer(&sport->lpuart_timer); } @@ -1632,12 +1627,11 @@ lpuart32_set_termios(struct uart_port *port, struct ktermios *termios, { struct lpuart_port *sport = container_of(port, struct lpuart_port, port); unsigned long flags; - unsigned long ctrl, old_ctrl, bd, modem; + unsigned long ctrl, old_ctrl, modem; unsigned int baud; unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8; ctrl = old_ctrl = lpuart32_read(&sport->port, UARTCTRL); - bd = lpuart32_read(&sport->port, UARTBAUD); modem = lpuart32_read(&sport->port, UARTMODIR); /* * only support CS8 and CS7, and for CS7 must enable PE. @@ -2212,6 +2206,24 @@ static int lpuart_probe(struct platform_device *pdev) if (ret) goto failed_attach_port; + of_get_rs485_mode(np, &sport->port.rs485); + + if (sport->port.rs485.flags & SER_RS485_RX_DURING_TX) { + dev_err(&pdev->dev, "driver doesn't support RX during TX\n"); + return -ENOSYS; + } + + if (sport->port.rs485.delay_rts_before_send || + sport->port.rs485.delay_rts_after_send) { + dev_err(&pdev->dev, "driver doesn't support RTS delays\n"); + return -ENOSYS; + } + + if (sport->port.rs485.flags & SER_RS485_ENABLED) { + sport->port.rs485.flags |= SER_RS485_RTS_ON_SEND; + writeb(UARTMODEM_TXRTSE, sport->port.membase + UARTMODEM); + } + sport->dma_tx_chan = dma_request_slave_channel(sport->port.dev, "tx"); if (!sport->dma_tx_chan) dev_info(sport->port.dev, "DMA tx channel request failed, " @@ -2222,12 +2234,6 @@ static int lpuart_probe(struct platform_device *pdev) dev_info(sport->port.dev, "DMA rx channel request failed, " "operating without rx DMA\n"); - if (of_property_read_bool(np, "linux,rs485-enabled-at-boot-time")) { - sport->port.rs485.flags |= SER_RS485_ENABLED; - sport->port.rs485.flags |= SER_RS485_RTS_ON_SEND; - writeb(UARTMODEM_TXRTSE, sport->port.membase + UARTMODEM); - } - return 0; failed_attach_port: |