summaryrefslogtreecommitdiff
path: root/drivers/thermal/imx_thermal.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/thermal/imx_thermal.c')
-rw-r--r--drivers/thermal/imx_thermal.c136
1 files changed, 107 insertions, 29 deletions
diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c
index 2c516f2eebed..5a1f1070b702 100644
--- a/drivers/thermal/imx_thermal.c
+++ b/drivers/thermal/imx_thermal.c
@@ -19,6 +19,7 @@
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of.h>
+#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/slab.h>
@@ -31,6 +32,11 @@
#define MISC0 0x0150
#define MISC0_REFTOP_SELBIASOFF (1 << 3)
+#define MISC1 0x0160
+#define MISC1_IRQ_TEMPHIGH (1 << 29)
+/* Below LOW and PANIC bits are only for TEMPMON_IMX6SX */
+#define MISC1_IRQ_TEMPLOW (1 << 28)
+#define MISC1_IRQ_TEMPPANIC (1 << 27)
#define TEMPSENSE0 0x0180
#define TEMPSENSE0_ALARM_VALUE_SHIFT 20
@@ -43,6 +49,12 @@
#define TEMPSENSE1 0x0190
#define TEMPSENSE1_MEASURE_FREQ 0xffff
+/* Below TEMPSENSE2 is only for TEMPMON_IMX6SX */
+#define TEMPSENSE2 0x0290
+#define TEMPSENSE2_LOW_VALUE_SHIFT 0
+#define TEMPSENSE2_LOW_VALUE_MASK 0xfff
+#define TEMPSENSE2_PANIC_VALUE_SHIFT 16
+#define TEMPSENSE2_PANIC_VALUE_MASK 0xfff0000
#define OCOTP_ANA1 0x04e0
@@ -66,6 +78,21 @@ enum imx_thermal_trip {
#define FACTOR1 15976
#define FACTOR2 4297157
+#define TEMPMON_IMX6Q 1
+#define TEMPMON_IMX6SX 2
+
+struct thermal_soc_data {
+ u32 version;
+};
+
+static struct thermal_soc_data thermal_imx6q_data = {
+ .version = TEMPMON_IMX6Q,
+};
+
+static struct thermal_soc_data thermal_imx6sx_data = {
+ .version = TEMPMON_IMX6SX,
+};
+
struct imx_thermal_data {
struct thermal_zone_device *tz;
struct thermal_cooling_device *cdev;
@@ -79,8 +106,21 @@ struct imx_thermal_data {
bool irq_enabled;
int irq;
struct clk *thermal_clk;
+ const struct thermal_soc_data *socdata;
};
+static void imx_set_panic_temp(struct imx_thermal_data *data,
+ signed long panic_temp)
+{
+ struct regmap *map = data->tempmon;
+ int critical_value;
+
+ critical_value = (data->c2 - panic_temp) / data->c1;
+ regmap_write(map, TEMPSENSE2 + REG_CLR, TEMPSENSE2_PANIC_VALUE_MASK);
+ regmap_write(map, TEMPSENSE2 + REG_SET, critical_value <<
+ TEMPSENSE2_PANIC_VALUE_SHIFT);
+}
+
static void imx_set_alarm_temp(struct imx_thermal_data *data,
signed long alarm_temp)
{
@@ -142,13 +182,17 @@ static int imx_get_temp(struct thermal_zone_device *tz, unsigned long *temp)
/* See imx_get_sensor_data() for formula derivation */
*temp = data->c2 - n_meas * data->c1;
- /* Update alarm value to next higher trip point */
- if (data->alarm_temp == data->temp_passive && *temp >= data->temp_passive)
- imx_set_alarm_temp(data, data->temp_critical);
- if (data->alarm_temp == data->temp_critical && *temp < data->temp_passive) {
- imx_set_alarm_temp(data, data->temp_passive);
- dev_dbg(&tz->device, "thermal alarm off: T < %lu\n",
- data->alarm_temp / 1000);
+ /* Update alarm value to next higher trip point for TEMPMON_IMX6Q */
+ if (data->socdata->version == TEMPMON_IMX6Q) {
+ if (data->alarm_temp == data->temp_passive &&
+ *temp >= data->temp_passive)
+ imx_set_alarm_temp(data, data->temp_critical);
+ if (data->alarm_temp == data->temp_critical &&
+ *temp < data->temp_passive) {
+ imx_set_alarm_temp(data, data->temp_passive);
+ dev_dbg(&tz->device, "thermal alarm off: T < %lu\n",
+ data->alarm_temp / 1000);
+ }
}
if (*temp != data->last_temp) {
@@ -398,14 +442,27 @@ static irqreturn_t imx_thermal_alarm_irq_thread(int irq, void *dev)
return IRQ_HANDLED;
}
+static const struct of_device_id of_imx_thermal_match[] = {
+ { .compatible = "fsl,imx6q-tempmon", .data = &thermal_imx6q_data, },
+ { .compatible = "fsl,imx6sx-tempmon", .data = &thermal_imx6sx_data, },
+ { /* end */ }
+};
+MODULE_DEVICE_TABLE(of, of_imx_thermal_match);
+
static int imx_thermal_probe(struct platform_device *pdev)
{
+ const struct of_device_id *of_id =
+ of_match_device(of_imx_thermal_match, &pdev->dev);
struct imx_thermal_data *data;
struct cpumask clip_cpus;
struct regmap *map;
int measure_freq;
int ret;
+ if (!cpufreq_get_current_driver()) {
+ dev_dbg(&pdev->dev, "no cpufreq driver!");
+ return -EPROBE_DEFER;
+ }
data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
@@ -418,6 +475,20 @@ static int imx_thermal_probe(struct platform_device *pdev)
}
data->tempmon = map;
+ data->socdata = of_id->data;
+
+ /* make sure the IRQ flag is clear before enabling irq on i.MX6SX */
+ if (data->socdata->version == TEMPMON_IMX6SX) {
+ regmap_write(map, MISC1 + REG_CLR, MISC1_IRQ_TEMPHIGH |
+ MISC1_IRQ_TEMPLOW | MISC1_IRQ_TEMPPANIC);
+ /*
+ * reset value of LOW ALARM is incorrect, set it to lowest
+ * value to avoid false trigger of low alarm.
+ */
+ regmap_write(map, TEMPSENSE2 + REG_SET,
+ TEMPSENSE2_LOW_VALUE_MASK);
+ }
+
data->irq = platform_get_irq(pdev, 0);
if (data->irq < 0)
return data->irq;
@@ -454,6 +525,30 @@ static int imx_thermal_probe(struct platform_device *pdev)
return ret;
}
+ data->thermal_clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(data->thermal_clk)) {
+ ret = PTR_ERR(data->thermal_clk);
+ if (ret != -EPROBE_DEFER)
+ dev_err(&pdev->dev,
+ "failed to get thermal clk: %d\n", ret);
+ cpufreq_cooling_unregister(data->cdev);
+ return ret;
+ }
+
+ /*
+ * Thermal sensor needs clk on to get correct value, normally
+ * we should enable its clk before taking measurement and disable
+ * clk after measurement is done, but if alarm function is enabled,
+ * hardware will auto measure the temperature periodically, so we
+ * need to keep the clk always on for alarm function.
+ */
+ ret = clk_prepare_enable(data->thermal_clk);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to enable thermal clk: %d\n", ret);
+ cpufreq_cooling_unregister(data->cdev);
+ return ret;
+ }
+
data->tz = thermal_zone_device_register("imx_thermal_zone",
IMX_TRIP_NUM,
BIT(IMX_TRIP_PASSIVE), data,
@@ -464,31 +559,20 @@ static int imx_thermal_probe(struct platform_device *pdev)
ret = PTR_ERR(data->tz);
dev_err(&pdev->dev,
"failed to register thermal zone device %d\n", ret);
+ clk_disable_unprepare(data->thermal_clk);
cpufreq_cooling_unregister(data->cdev);
return ret;
}
- data->thermal_clk = devm_clk_get(&pdev->dev, NULL);
- if (IS_ERR(data->thermal_clk)) {
- dev_warn(&pdev->dev, "failed to get thermal clk!\n");
- } else {
- /*
- * Thermal sensor needs clk on to get correct value, normally
- * we should enable its clk before taking measurement and disable
- * clk after measurement is done, but if alarm function is enabled,
- * hardware will auto measure the temperature periodically, so we
- * need to keep the clk always on for alarm function.
- */
- ret = clk_prepare_enable(data->thermal_clk);
- if (ret)
- dev_warn(&pdev->dev, "failed to enable thermal clk: %d\n", ret);
- }
-
/* Enable measurements at ~ 10 Hz */
regmap_write(map, TEMPSENSE1 + REG_CLR, TEMPSENSE1_MEASURE_FREQ);
measure_freq = DIV_ROUND_UP(32768, 10); /* 10 Hz */
regmap_write(map, TEMPSENSE1 + REG_SET, measure_freq);
imx_set_alarm_temp(data, data->temp_passive);
+
+ if (data->socdata->version == TEMPMON_IMX6SX)
+ imx_set_panic_temp(data, data->temp_critical);
+
regmap_write(map, TEMPSENSE0 + REG_CLR, TEMPSENSE0_POWER_DOWN);
regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_MEASURE_TEMP);
@@ -550,12 +634,6 @@ static int imx_thermal_resume(struct device *dev)
static SIMPLE_DEV_PM_OPS(imx_thermal_pm_ops,
imx_thermal_suspend, imx_thermal_resume);
-static const struct of_device_id of_imx_thermal_match[] = {
- { .compatible = "fsl,imx6q-tempmon", },
- { /* end */ }
-};
-MODULE_DEVICE_TABLE(of, of_imx_thermal_match);
-
static struct platform_driver imx_thermal = {
.driver = {
.name = "imx_thermal",