diff options
Diffstat (limited to 'drivers/staging')
60 files changed, 237 insertions, 855 deletions
diff --git a/drivers/staging/batman-adv/hard-interface.c b/drivers/staging/batman-adv/hard-interface.c index baa8b05b9e8d..6e973a79aa25 100644 --- a/drivers/staging/batman-adv/hard-interface.c +++ b/drivers/staging/batman-adv/hard-interface.c @@ -30,7 +30,6 @@ #include "hash.h" #include <linux/if_arp.h> -#include <linux/netfilter_bridge.h> #define MIN(x, y) ((x) < (y) ? (x) : (y)) @@ -431,11 +430,6 @@ out: return NOTIFY_DONE; } -static int batman_skb_recv_finish(struct sk_buff *skb) -{ - return NF_ACCEPT; -} - /* receive a packet with the batman ethertype coming on a hard * interface */ int batman_skb_recv(struct sk_buff *skb, struct net_device *dev, @@ -456,13 +450,6 @@ int batman_skb_recv(struct sk_buff *skb, struct net_device *dev, if (atomic_read(&module_state) != MODULE_ACTIVE) goto err_free; - /* if netfilter/ebtables wants to block incoming batman - * packets then give them a chance to do so here */ - ret = NF_HOOK(PF_BRIDGE, NF_BR_LOCAL_IN, skb, dev, NULL, - batman_skb_recv_finish); - if (ret != 1) - goto err_out; - /* packet should hold at least type and version */ if (unlikely(skb_headlen(skb) < 2)) goto err_free; diff --git a/drivers/staging/batman-adv/send.c b/drivers/staging/batman-adv/send.c index 055edee7b4e4..da3c82e47bbd 100644 --- a/drivers/staging/batman-adv/send.c +++ b/drivers/staging/batman-adv/send.c @@ -29,7 +29,6 @@ #include "vis.h" #include "aggregation.h" -#include <linux/netfilter_bridge.h> static void send_outstanding_bcast_packet(struct work_struct *work); @@ -92,12 +91,9 @@ int send_skb_packet(struct sk_buff *skb, /* dev_queue_xmit() returns a negative result on error. However on * congestion and traffic shaping, it drops and returns NET_XMIT_DROP - * (which is > 0). This will not be treated as an error. - * Also, if netfilter/ebtables wants to block outgoing batman - * packets then giving them a chance to do so here */ + * (which is > 0). This will not be treated as an error. */ - return NF_HOOK(PF_BRIDGE, NF_BR_LOCAL_OUT, skb, NULL, skb->dev, - dev_queue_xmit); + return dev_queue_xmit(skb); send_skb_err: kfree_skb(skb); return NET_XMIT_DROP; diff --git a/drivers/staging/comedi/comedi_fops.c b/drivers/staging/comedi/comedi_fops.c index 14091313cebb..fecb89e8c663 100644 --- a/drivers/staging/comedi/comedi_fops.c +++ b/drivers/staging/comedi/comedi_fops.c @@ -1922,6 +1922,7 @@ const struct file_operations comedi_fops = { .mmap = comedi_mmap, .poll = comedi_poll, .fasync = comedi_fasync, + .llseek = noop_llseek, }; struct class *comedi_class; diff --git a/drivers/staging/comedi/drivers/cb_das16_cs.c b/drivers/staging/comedi/drivers/cb_das16_cs.c index f8ede1182ccc..0345b4caba73 100644 --- a/drivers/staging/comedi/drivers/cb_das16_cs.c +++ b/drivers/staging/comedi/drivers/cb_das16_cs.c @@ -37,7 +37,6 @@ Status: experimental #include <linux/delay.h> #include <linux/pci.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> @@ -692,10 +691,6 @@ static int das16cs_pcmcia_attach(struct pcmcia_device *link) local->link = link; link->priv = local; - /* Initialize the pcmcia_device structure */ - link->conf.Attributes = 0; - link->conf.IntType = INT_MEMORY_AND_IO; - cur_dev = link; das16cs_pcmcia_config(link); @@ -715,37 +710,12 @@ static void das16cs_pcmcia_detach(struct pcmcia_device *link) static int das16cs_pcmcia_config_loop(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, void *priv_data) { - if (cfg->index == 0) + if (p_dev->config_index == 0) return -EINVAL; - /* Do we need to allocate an interrupt? */ - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; - - /* IO window settings */ - p_dev->resource[0]->end = p_dev->resource[1]->end = 0; - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - p_dev->resource[0]->flags |= - pcmcia_io_cfg_data_width(io->flags); - p_dev->resource[0]->start = io->win[0].base; - p_dev->resource[0]->end = io->win[0].len; - if (io->nwin > 1) { - p_dev->resource[1]->flags = p_dev->resource[0]->flags; - p_dev->resource[1]->start = io->win[1].base; - p_dev->resource[1]->end = io->win[1].len; - } - /* This reserves IO space but doesn't actually enable it */ - return pcmcia_request_io(p_dev); - } - - return 0; + return pcmcia_request_io(p_dev); } static void das16cs_pcmcia_config(struct pcmcia_device *link) @@ -754,6 +724,9 @@ static void das16cs_pcmcia_config(struct pcmcia_device *link) dev_dbg(&link->dev, "das16cs_pcmcia_config\n"); + /* Do we need to allocate an interrupt? */ + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; + ret = pcmcia_loop_config(link, das16cs_pcmcia_config_loop, NULL); if (ret) { dev_warn(&link->dev, "no configuration found\n"); @@ -763,25 +736,10 @@ static void das16cs_pcmcia_config(struct pcmcia_device *link) if (!link->irq) goto failed; - /* - This actually configures the PCMCIA socket -- setting up - the I/O windows and the interrupt mapping, and putting the - card and host interface into "Memory and IO" mode. - */ - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; - /* Finally, report what we've done */ - dev_info(&link->dev, "index 0x%02x", link->conf.ConfigIndex); - if (link->conf.Attributes & CONF_ENABLE_IRQ) - printk(", irq %u", link->irq); - if (link->resource[0]) - printk(", io %pR", link->resource[0]); - if (link->resource[1]) - printk(", io %pR", link->resource[1]); - printk("\n"); - return; failed: @@ -832,9 +790,7 @@ struct pcmcia_driver das16cs_driver = { .resume = das16cs_pcmcia_resume, .id_table = das16cs_id_table, .owner = THIS_MODULE, - .drv = { - .name = "cb_das16_cs", - }, + .name = "cb_das16_cs", }; static int __init init_das16cs_pcmcia_cs(void) diff --git a/drivers/staging/comedi/drivers/das08_cs.c b/drivers/staging/comedi/drivers/das08_cs.c index c6aa52f8dcee..0b32a2df7768 100644 --- a/drivers/staging/comedi/drivers/das08_cs.c +++ b/drivers/staging/comedi/drivers/das08_cs.c @@ -48,7 +48,6 @@ Command support does not exist, but could be added for this board. #include "das08.h" /* pcmcia includes */ -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> @@ -115,40 +114,15 @@ static void das08_pcmcia_release(struct pcmcia_device *link); static int das08_pcmcia_suspend(struct pcmcia_device *p_dev); static int das08_pcmcia_resume(struct pcmcia_device *p_dev); -/* - The attach() and detach() entry points are used to create and destroy - "instances" of the driver, where each instance represents everything - needed to manage one actual PCMCIA card. -*/ - static int das08_pcmcia_attach(struct pcmcia_device *); static void das08_pcmcia_detach(struct pcmcia_device *); -/* - You'll also need to prototype all the functions that will actually - be used to talk to your device. See 'memory_cs' for a good example - of a fully self-sufficient driver; the other drivers rely more or - less on other parts of the kernel. -*/ - struct local_info_t { struct pcmcia_device *link; int stop; struct bus_operations *bus; }; -/*====================================================================== - - das08_pcmcia_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - - The dev_link structure is initialized, but we don't actually - configure the card at this point -- we wait until we receive a - card insertion event. - -======================================================================*/ - static int das08_pcmcia_attach(struct pcmcia_device *link) { struct local_info_t *local; @@ -162,16 +136,6 @@ static int das08_pcmcia_attach(struct pcmcia_device *link) local->link = link; link->priv = local; - /* - General socket configuration defaults can go here. In this - client, we assume very little, and rely on the CIS for almost - everything. In most clients, many details (i.e., number, sizes, - and attributes of IO windows) are fixed by the nature of the - device, and can be hard-wired here. - */ - link->conf.Attributes = 0; - link->conf.IntType = INT_MEMORY_AND_IO; - cur_dev = link; das08_pcmcia_config(link); @@ -179,15 +143,6 @@ static int das08_pcmcia_attach(struct pcmcia_device *link) return 0; } /* das08_pcmcia_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ - static void das08_pcmcia_detach(struct pcmcia_device *link) { @@ -203,47 +158,13 @@ static void das08_pcmcia_detach(struct pcmcia_device *link) static int das08_pcmcia_config_loop(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, void *priv_data) { - if (cfg->index == 0) - return -ENODEV; - - /* Do we need to allocate an interrupt? */ - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; - - /* IO window settings */ - p_dev->resource[0]->end = p_dev->resource[1]->end = 0; - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - p_dev->resource[0]->flags |= - pcmcia_io_cfg_data_width(io->flags); - p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->resource[0]->start = io->win[0].base; - p_dev->resource[0]->end = io->win[0].len; - if (io->nwin > 1) { - p_dev->resource[1]->flags = p_dev->resource[0]->flags; - p_dev->resource[1]->start = io->win[1].base; - p_dev->resource[1]->end = io->win[1].len; - } - /* This reserves IO space but doesn't actually enable it */ - return pcmcia_request_io(p_dev); - } - return 0; -} - - -/*====================================================================== - - das08_pcmcia_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - device available to the system. + if (p_dev->config_index == 0) + return -EINVAL; -======================================================================*/ + return pcmcia_request_io(p_dev); +} static void das08_pcmcia_config(struct pcmcia_device *link) { @@ -251,6 +172,8 @@ static void das08_pcmcia_config(struct pcmcia_device *link) dev_dbg(&link->dev, "das08_pcmcia_config\n"); + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; + ret = pcmcia_loop_config(link, das08_pcmcia_config_loop, NULL); if (ret) { dev_warn(&link->dev, "no configuration found\n"); @@ -260,25 +183,10 @@ static void das08_pcmcia_config(struct pcmcia_device *link) if (!link->irq) goto failed; - /* - This actually configures the PCMCIA socket -- setting up - the I/O windows and the interrupt mapping, and putting the - card and host interface into "Memory and IO" mode. - */ - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; - /* Finally, report what we've done */ - dev_info(&link->dev, "index 0x%02x", link->conf.ConfigIndex); - if (link->conf.Attributes & CONF_ENABLE_IRQ) - printk(", irq %u", link->irq); - if (link->resource[0]) - printk(", io %pR", link->resource[0]); - if (link->resource[1]) - printk(" & %pR", link->resource[1]); - printk("\n"); - return; failed: @@ -286,32 +194,12 @@ failed: } /* das08_pcmcia_config */ -/*====================================================================== - - After a card is removed, das08_pcmcia_release() will unregister the - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. - -======================================================================*/ - static void das08_pcmcia_release(struct pcmcia_device *link) { dev_dbg(&link->dev, "das08_pcmcia_release\n"); pcmcia_disable_device(link); } /* das08_pcmcia_release */ -/*====================================================================== - - The card status event handler. Mostly, this schedules other - stuff to run after an event is received. - - When a CARD_REMOVAL event is received, we immediately set a - private flag to block future accesses to this device. All the - functions that actually access the device should check this flag - to make sure the card is still present. - -======================================================================*/ - static int das08_pcmcia_suspend(struct pcmcia_device *link) { struct local_info_t *local = link->priv; @@ -349,9 +237,7 @@ struct pcmcia_driver das08_cs_driver = { .resume = das08_pcmcia_resume, .id_table = das08_cs_id_table, .owner = THIS_MODULE, - .drv = { - .name = "pcm-das08", - }, + .name = "pcm-das08", }; static int __init init_das08_pcmcia_cs(void) diff --git a/drivers/staging/comedi/drivers/ni_daq_700.c b/drivers/staging/comedi/drivers/ni_daq_700.c index cc15666e5cc1..6b7372eed90d 100644 --- a/drivers/staging/comedi/drivers/ni_daq_700.c +++ b/drivers/staging/comedi/drivers/ni_daq_700.c @@ -47,7 +47,6 @@ IRQ is assigned but not used. #include <linux/ioport.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> @@ -435,47 +434,20 @@ static int dio700_detach(struct comedi_device *dev) return 0; }; -/* PCMCIA crap -- watch your words, please! */ - static void dio700_config(struct pcmcia_device *link); static void dio700_release(struct pcmcia_device *link); static int dio700_cs_suspend(struct pcmcia_device *p_dev); static int dio700_cs_resume(struct pcmcia_device *p_dev); -/* - The attach() and detach() entry points are used to create and destroy - "instances" of the driver, where each instance represents everything - needed to manage one actual PCMCIA card. -*/ - static int dio700_cs_attach(struct pcmcia_device *); static void dio700_cs_detach(struct pcmcia_device *); -/* - You'll also need to prototype all the functions that will actually - be used to talk to your device. See 'memory_cs' for a good example - of a fully self-sufficient driver; the other drivers rely more or - less on other parts of the kernel. -*/ - struct local_info_t { struct pcmcia_device *link; int stop; struct bus_operations *bus; }; -/*====================================================================== - - dio700_cs_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - - The dev_link structure is initialized, but we don't actually - configure the card at this point -- we wait until we receive a - card insertion event. - -======================================================================*/ - static int dio700_cs_attach(struct pcmcia_device *link) { struct local_info_t *local; @@ -491,16 +463,6 @@ static int dio700_cs_attach(struct pcmcia_device *link) local->link = link; link->priv = local; - /* - General socket configuration defaults can go here. In this - client, we assume very little, and rely on the CIS for almost - everything. In most clients, many details (i.e., number, sizes, - and attributes of IO windows) are fixed by the nature of the - device, and can be hard-wired here. - */ - link->conf.Attributes = 0; - link->conf.IntType = INT_MEMORY_AND_IO; - pcmcia_cur_dev = link; dio700_config(link); @@ -508,15 +470,6 @@ static int dio700_cs_attach(struct pcmcia_device *link) return 0; } /* dio700_cs_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ - static void dio700_cs_detach(struct pcmcia_device *link) { @@ -532,65 +485,26 @@ static void dio700_cs_detach(struct pcmcia_device *link) } /* dio700_cs_detach */ -/*====================================================================== - - dio700_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - device available to the system. - -======================================================================*/ - static int dio700_pcmcia_config_loop(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, void *priv_data) { - if (cfg->index == 0) - return -ENODEV; - - /* Does this card need audio output? */ - if (cfg->flags & CISTPL_CFTABLE_AUDIO) { - p_dev->conf.Attributes |= CONF_ENABLE_SPKR; - p_dev->conf.Status = CCSR_AUDIO_ENA; - } - - /* Do we need to allocate an interrupt? */ - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; - - /* IO window settings */ - p_dev->resource[0]->end = p_dev->resource[1]->end = 0; - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - p_dev->resource[0]->flags |= - pcmcia_io_cfg_data_width(io->flags); - p_dev->resource[0]->start = io->win[0].base; - p_dev->resource[0]->end = io->win[0].len; - if (io->nwin > 1) { - p_dev->resource[1]->flags = p_dev->resource[0]->flags; - p_dev->resource[1]->start = io->win[1].base; - p_dev->resource[1]->end = io->win[1].len; - } - /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(p_dev) != 0) - return -ENODEV; - } + if (p_dev->config_index == 0) + return -EINVAL; - /* If we got this far, we're cool! */ - return 0; + return pcmcia_request_io(p_dev); } static void dio700_config(struct pcmcia_device *link) { - win_req_t req; int ret; printk(KERN_INFO "ni_daq_700: cs-config\n"); dev_dbg(&link->dev, "dio700_config\n"); + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_AUDIO | + CONF_AUTO_SET_IO; + ret = pcmcia_loop_config(link, dio700_pcmcia_config_loop, NULL); if (ret) { dev_warn(&link->dev, "no configuration found\n"); @@ -600,25 +514,10 @@ static void dio700_config(struct pcmcia_device *link) if (!link->irq) goto failed; - /* - This actually configures the PCMCIA socket -- setting up - the I/O windows and the interrupt mapping, and putting the - card and host interface into "Memory and IO" mode. - */ - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret != 0) goto failed; - /* Finally, report what we've done */ - dev_info(&link->dev, "index 0x%02x", link->conf.ConfigIndex); - if (link->conf.Attributes & CONF_ENABLE_IRQ) - printk(", irq %d", link->irq); - if (link->resource[0]) - printk(", io %pR", link->resource[0]); - if (link->resource[1]) - printk(" & %pR", link->resource[1]); - printk("\n"); - return; failed: @@ -634,18 +533,6 @@ static void dio700_release(struct pcmcia_device *link) pcmcia_disable_device(link); } /* dio700_release */ -/*====================================================================== - - The card status event handler. Mostly, this schedules other - stuff to run after an event is received. - - When a CARD_REMOVAL event is received, we immediately set a - private flag to block future accesses to this device. All the - functions that actually access the device should check this flag - to make sure the card is still present. - -======================================================================*/ - static int dio700_cs_suspend(struct pcmcia_device *link) { struct local_info_t *local = link->priv; @@ -685,9 +572,7 @@ struct pcmcia_driver dio700_cs_driver = { .resume = dio700_cs_resume, .id_table = dio700_cs_ids, .owner = THIS_MODULE, - .drv = { - .name = "ni_daq_700", - }, + .name = "ni_daq_700", }; static int __init init_dio700_cs(void) diff --git a/drivers/staging/comedi/drivers/ni_daq_dio24.c b/drivers/staging/comedi/drivers/ni_daq_dio24.c index 773ae2044e0e..c9c28584db67 100644 --- a/drivers/staging/comedi/drivers/ni_daq_dio24.c +++ b/drivers/staging/comedi/drivers/ni_daq_dio24.c @@ -48,7 +48,6 @@ the PCMCIA interface. #include "8255.h" -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> @@ -187,47 +186,20 @@ static int dio24_detach(struct comedi_device *dev) return 0; }; -/* PCMCIA crap -- watch your words! */ - static void dio24_config(struct pcmcia_device *link); static void dio24_release(struct pcmcia_device *link); static int dio24_cs_suspend(struct pcmcia_device *p_dev); static int dio24_cs_resume(struct pcmcia_device *p_dev); -/* - The attach() and detach() entry points are used to create and destroy - "instances" of the driver, where each instance represents everything - needed to manage one actual PCMCIA card. -*/ - static int dio24_cs_attach(struct pcmcia_device *); static void dio24_cs_detach(struct pcmcia_device *); -/* - You'll also need to prototype all the functions that will actually - be used to talk to your device. See 'memory_cs' for a good example - of a fully self-sufficient driver; the other drivers rely more or - less on other parts of the kernel. -*/ - struct local_info_t { struct pcmcia_device *link; int stop; struct bus_operations *bus; }; -/*====================================================================== - - dio24_cs_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - - The dev_link structure is initialized, but we don't actually - configure the card at this point -- we wait until we receive a - card insertion event. - -======================================================================*/ - static int dio24_cs_attach(struct pcmcia_device *link) { struct local_info_t *local; @@ -243,16 +215,6 @@ static int dio24_cs_attach(struct pcmcia_device *link) local->link = link; link->priv = local; - /* - General socket configuration defaults can go here. In this - client, we assume very little, and rely on the CIS for almost - everything. In most clients, many details (i.e., number, sizes, - and attributes of IO windows) are fixed by the nature of the - device, and can be hard-wired here. - */ - link->conf.Attributes = 0; - link->conf.IntType = INT_MEMORY_AND_IO; - pcmcia_cur_dev = link; dio24_config(link); @@ -260,15 +222,6 @@ static int dio24_cs_attach(struct pcmcia_device *link) return 0; } /* dio24_cs_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ - static void dio24_cs_detach(struct pcmcia_device *link) { @@ -284,54 +237,13 @@ static void dio24_cs_detach(struct pcmcia_device *link) } /* dio24_cs_detach */ -/*====================================================================== - - dio24_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - device available to the system. - -======================================================================*/ - static int dio24_pcmcia_config_loop(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, void *priv_data) { - if (cfg->index == 0) - return -ENODEV; - - /* Does this card need audio output? */ - if (cfg->flags & CISTPL_CFTABLE_AUDIO) { - p_dev->conf.Attributes |= CONF_ENABLE_SPKR; - p_dev->conf.Status = CCSR_AUDIO_ENA; - } - - /* Do we need to allocate an interrupt? */ - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; - - /* IO window settings */ - p_dev->resource[0]->end = p_dev->resource[1]->end = 0; - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - p_dev->resource[0]->flags |= - pcmcia_io_cfg_data_width(io->flags); - p_dev->resource[0]->start = io->win[0].base; - p_dev->resource[0]->end = io->win[0].len; - if (io->nwin > 1) { - p_dev->resource[1]->flags = p_dev->resource[0]->flags; - p_dev->resource[1]->start = io->win[1].base; - p_dev->resource[1]->end = io->win[1].len; - } - /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(p_dev) != 0) - return -ENODEV; - } + if (p_dev->config_index == 0) + return -EINVAL; - /* If we got this far, we're cool! */ - return 0; + return pcmcia_request_io(p_dev); } static void dio24_config(struct pcmcia_device *link) @@ -342,6 +254,9 @@ static void dio24_config(struct pcmcia_device *link) dev_dbg(&link->dev, "dio24_config\n"); + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_AUDIO | + CONF_AUTO_SET_IO; + ret = pcmcia_loop_config(link, dio24_pcmcia_config_loop, NULL); if (ret) { dev_warn(&link->dev, "no configuration found\n"); @@ -351,25 +266,10 @@ static void dio24_config(struct pcmcia_device *link) if (!link->irq) goto failed; - /* - This actually configures the PCMCIA socket -- setting up - the I/O windows and the interrupt mapping, and putting the - card and host interface into "Memory and IO" mode. - */ - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; - /* Finally, report what we've done */ - dev_info(&link->dev, "index 0x%02x", link->conf.ConfigIndex); - if (link->conf.Attributes & CONF_ENABLE_IRQ) - printk(", irq %d", link->irq); - if (link->resource[0]) - printk(" & %pR", link->resource[0]); - if (link->resource[1]) - printk(" & %pR", link->resource[1]); - printk("\n"); - return; failed: @@ -385,18 +285,6 @@ static void dio24_release(struct pcmcia_device *link) pcmcia_disable_device(link); } /* dio24_release */ -/*====================================================================== - - The card status event handler. Mostly, this schedules other - stuff to run after an event is received. - - When a CARD_REMOVAL event is received, we immediately set a - private flag to block future accesses to this device. All the - functions that actually access the device should check this flag - to make sure the card is still present. - -======================================================================*/ - static int dio24_cs_suspend(struct pcmcia_device *link) { struct local_info_t *local = link->priv; @@ -435,9 +323,7 @@ struct pcmcia_driver dio24_cs_driver = { .resume = dio24_cs_resume, .id_table = dio24_cs_ids, .owner = THIS_MODULE, - .drv = { - .name = "ni_daq_dio24", - }, + .name = "ni_daq_dio24", }; static int __init init_dio24_cs(void) diff --git a/drivers/staging/comedi/drivers/ni_labpc_cs.c b/drivers/staging/comedi/drivers/ni_labpc_cs.c index 68c4ecbd93ae..6facbc8bf776 100644 --- a/drivers/staging/comedi/drivers/ni_labpc_cs.c +++ b/drivers/staging/comedi/drivers/ni_labpc_cs.c @@ -71,7 +71,6 @@ NI manuals: #include "comedi_fc.h" #include "ni_labpc.h" -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> @@ -153,59 +152,20 @@ static int labpc_attach(struct comedi_device *dev, struct comedi_devconfig *it) return labpc_common_attach(dev, iobase, irq, 0); } -/*====================================================================*/ - -/* - The event() function is this driver's Card Services event handler. - It will be called by Card Services when an appropriate card status - event is received. The config() and release() entry points are - used to configure or release a socket, in response to card - insertion and ejection events. They are invoked from the dummy - event handler. - - Kernel version 2.6.16 upwards uses suspend() and resume() functions - instead of an event() function. -*/ - static void labpc_config(struct pcmcia_device *link); static void labpc_release(struct pcmcia_device *link); static int labpc_cs_suspend(struct pcmcia_device *p_dev); static int labpc_cs_resume(struct pcmcia_device *p_dev); -/* - The attach() and detach() entry points are used to create and destroy - "instances" of the driver, where each instance represents everything - needed to manage one actual PCMCIA card. -*/ - static int labpc_cs_attach(struct pcmcia_device *); static void labpc_cs_detach(struct pcmcia_device *); -/* - You'll also need to prototype all the functions that will actually - be used to talk to your device. See 'memory_cs' for a good example - of a fully self-sufficient driver; the other drivers rely more or - less on other parts of the kernel. -*/ - struct local_info_t { struct pcmcia_device *link; int stop; struct bus_operations *bus; }; -/*====================================================================== - - labpc_cs_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - - The dev_link structure is initialized, but we don't actually - configure the card at this point -- we wait until we receive a - card insertion event. - -======================================================================*/ - static int labpc_cs_attach(struct pcmcia_device *link) { struct local_info_t *local; @@ -219,16 +179,6 @@ static int labpc_cs_attach(struct pcmcia_device *link) local->link = link; link->priv = local; - /* - General socket configuration defaults can go here. In this - client, we assume very little, and rely on the CIS for almost - everything. In most clients, many details (i.e., number, sizes, - and attributes of IO windows) are fixed by the nature of the - device, and can be hard-wired here. - */ - link->conf.Attributes = 0; - link->conf.IntType = INT_MEMORY_AND_IO; - pcmcia_cur_dev = link; labpc_config(link); @@ -236,15 +186,6 @@ static int labpc_cs_attach(struct pcmcia_device *link) return 0; } /* labpc_cs_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ - static void labpc_cs_detach(struct pcmcia_device *link) { dev_dbg(&link->dev, "labpc_cs_detach\n"); @@ -263,54 +204,13 @@ static void labpc_cs_detach(struct pcmcia_device *link) } /* labpc_cs_detach */ -/*====================================================================== - - labpc_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - device available to the system. - -======================================================================*/ - static int labpc_pcmcia_config_loop(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, void *priv_data) { - if (cfg->index == 0) - return -ENODEV; - - /* Does this card need audio output? */ - if (cfg->flags & CISTPL_CFTABLE_AUDIO) { - p_dev->conf.Attributes |= CONF_ENABLE_SPKR; - p_dev->conf.Status = CCSR_AUDIO_ENA; - } - - /* Do we need to allocate an interrupt? */ - p_dev->conf.Attributes |= CONF_ENABLE_IRQ | CONF_ENABLE_PULSE_IRQ; - - /* IO window settings */ - p_dev->resource[0]->end = p_dev->resource[1]->end = 0; - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - p_dev->resource[0]->flags |= - pcmcia_io_cfg_data_width(io->flags); - p_dev->resource[0]->start = io->win[0].base; - p_dev->resource[0]->end = io->win[0].len; - if (io->nwin > 1) { - p_dev->resource[1]->flags = p_dev->resource[0]->flags; - p_dev->resource[1]->start = io->win[1].base; - p_dev->resource[1]->end = io->win[1].len; - } - /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(p_dev) != 0) - return -ENODEV; - } + if (p_dev->config_index == 0) + return -EINVAL; - /* If we got this far, we're cool! */ - return 0; + return pcmcia_request_io(p_dev); } @@ -320,6 +220,9 @@ static void labpc_config(struct pcmcia_device *link) dev_dbg(&link->dev, "labpc_config\n"); + link->config_flags |= CONF_ENABLE_IRQ | CONF_ENABLE_PULSE_IRQ | + CONF_AUTO_AUDIO | CONF_AUTO_SET_IO; + ret = pcmcia_loop_config(link, labpc_pcmcia_config_loop, NULL); if (ret) { dev_warn(&link->dev, "no configuration found\n"); @@ -329,25 +232,10 @@ static void labpc_config(struct pcmcia_device *link) if (!link->irq) goto failed; - /* - This actually configures the PCMCIA socket -- setting up - the I/O windows and the interrupt mapping, and putting the - card and host interface into "Memory and IO" mode. - */ - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; - /* Finally, report what we've done */ - dev_info(&link->dev, "index 0x%02x", link->conf.ConfigIndex); - if (link->conf.Attributes & CONF_ENABLE_IRQ) - printk(", irq %d", link->irq); - if (link->resource[0]) - printk(" & %pR", link->resource[0]); - if (link->resource[1]) - printk(" & %pR", link->resource[1]); - printk("\n"); - return; failed: @@ -362,18 +250,6 @@ static void labpc_release(struct pcmcia_device *link) pcmcia_disable_device(link); } /* labpc_release */ -/*====================================================================== - - The card status event handler. Mostly, this schedules other - stuff to run after an event is received. - - When a CARD_REMOVAL event is received, we immediately set a - private flag to block future accesses to this device. All the - functions that actually access the device should check this flag - to make sure the card is still present. - -======================================================================*/ - static int labpc_cs_suspend(struct pcmcia_device *link) { struct local_info_t *local = link->priv; @@ -391,8 +267,6 @@ static int labpc_cs_resume(struct pcmcia_device *link) return 0; } /* labpc_cs_resume */ -/*====================================================================*/ - static struct pcmcia_device_id labpc_cs_ids[] = { /* N.B. These IDs should match those in labpc_cs_boards (ni_labpc.c) */ PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0103), /* daqcard-1200 */ @@ -411,9 +285,7 @@ struct pcmcia_driver labpc_cs_driver = { .resume = labpc_cs_resume, .id_table = labpc_cs_ids, .owner = THIS_MODULE, - .drv = { - .name = "daqcard-1200", - }, + .name = "daqcard-1200", }; static int __init init_labpc_cs(void) diff --git a/drivers/staging/comedi/drivers/ni_mio_cs.c b/drivers/staging/comedi/drivers/ni_mio_cs.c index 1f2426352eb5..49563273f605 100644 --- a/drivers/staging/comedi/drivers/ni_mio_cs.c +++ b/drivers/staging/comedi/drivers/ni_mio_cs.c @@ -48,7 +48,6 @@ See the notes in the ni_atmio.o driver. #include "ni_stc.h" #include "8255.h" -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> @@ -263,11 +262,6 @@ static struct pcmcia_device *cur_dev = NULL; static int cs_attach(struct pcmcia_device *link) { - link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16; - link->resource[0]->end = 16; - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; - cur_dev = link; mio_cs_config(link); @@ -301,16 +295,12 @@ static int mio_cs_resume(struct pcmcia_device *link) } -static int mio_pcmcia_config_loop(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int mio_pcmcia_config_loop(struct pcmcia_device *p_dev, void *priv_data) { int base, ret; - p_dev->resource[0]->end = cfg->io.win[0].len; - p_dev->io_lines = cfg->io.flags & CISTPL_IO_LINES_MASK; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_16; for (base = 0x000; base < 0x400; base += 0x20) { p_dev->resource[0]->start = base; @@ -327,6 +317,7 @@ static void mio_cs_config(struct pcmcia_device *link) int ret; DPRINTK("mio_cs_config(link=%p)\n", link); + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; ret = pcmcia_loop_config(link, mio_pcmcia_config_loop, NULL); if (ret) { @@ -337,7 +328,7 @@ static void mio_cs_config(struct pcmcia_device *link) if (!link->irq) dev_info(&link->dev, "no IRQ available\n"); - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); } static int mio_cs_attach(struct comedi_device *dev, struct comedi_devconfig *it) @@ -446,9 +437,7 @@ struct pcmcia_driver ni_mio_cs_driver = { .resume = &mio_cs_resume, .id_table = ni_mio_cs_ids, .owner = THIS_MODULE, - .drv = { - .name = "ni_mio_cs", - }, + .name = "ni_mio_cs", }; int init_module(void) diff --git a/drivers/staging/comedi/drivers/quatech_daqp_cs.c b/drivers/staging/comedi/drivers/quatech_daqp_cs.c index bf489d7f4990..ebba9bb47777 100644 --- a/drivers/staging/comedi/drivers/quatech_daqp_cs.c +++ b/drivers/staging/comedi/drivers/quatech_daqp_cs.c @@ -50,7 +50,6 @@ Devices: [Quatech] DAQP-208 (daqp), DAQP-308 #include "../comedidev.h" #include <linux/semaphore.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> @@ -969,43 +968,14 @@ static int daqp_detach(struct comedi_device *dev) ======================================================================*/ -/* - The event() function is this driver's Card Services event handler. - It will be called by Card Services when an appropriate card status - event is received. The config() and release() entry points are - used to configure or release a socket, in response to card - insertion and ejection events. - - Kernel version 2.6.16 upwards uses suspend() and resume() functions - instead of an event() function. -*/ - static void daqp_cs_config(struct pcmcia_device *link); static void daqp_cs_release(struct pcmcia_device *link); static int daqp_cs_suspend(struct pcmcia_device *p_dev); static int daqp_cs_resume(struct pcmcia_device *p_dev); -/* - The attach() and detach() entry points are used to create and destroy - "instances" of the driver, where each instance represents everything - needed to manage one actual PCMCIA card. -*/ - static int daqp_cs_attach(struct pcmcia_device *); static void daqp_cs_detach(struct pcmcia_device *); -/*====================================================================== - - daqp_cs_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - - The dev_link structure is initialized, but we don't actually - configure the card at this point -- we wait until we receive a - card insertion event. - -======================================================================*/ - static int daqp_cs_attach(struct pcmcia_device *link) { struct local_info_t *local; @@ -1031,30 +1001,11 @@ static int daqp_cs_attach(struct pcmcia_device *link) local->link = link; link->priv = local; - /* - General socket configuration defaults can go here. In this - client, we assume very little, and rely on the CIS for almost - everything. In most clients, many details (i.e., number, sizes, - and attributes of IO windows) are fixed by the nature of the - device, and can be hard-wired here. - */ - link->conf.Attributes = 0; - link->conf.IntType = INT_MEMORY_AND_IO; - daqp_cs_config(link); return 0; } /* daqp_cs_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ - static void daqp_cs_detach(struct pcmcia_device *link) { struct local_info_t *dev = link->priv; @@ -1070,45 +1021,11 @@ static void daqp_cs_detach(struct pcmcia_device *link) } /* daqp_cs_detach */ -/*====================================================================== - - daqp_cs_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - device available to the system. - -======================================================================*/ - - -static int daqp_pcmcia_config_loop(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int daqp_pcmcia_config_loop(struct pcmcia_device *p_dev, void *priv_data) { - if (cfg->index == 0) - return -ENODEV; + if (p_dev->config_index == 0) + return -EINVAL; - /* Do we need to allocate an interrupt? */ - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; - - /* IO window settings */ - p_dev->resource[0]->end = p_dev->resource[1]->end = 0; - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - p_dev->resource[0]->flags |= - pcmcia_io_cfg_data_width(io->flags); - p_dev->resource[0]->start = io->win[0].base; - p_dev->resource[0]->end = io->win[0].len; - if (io->nwin > 1) { - p_dev->resource[1]->flags = p_dev->resource[0]->flags; - p_dev->resource[1]->start = io->win[1].base; - p_dev->resource[1]->end = io->win[1].len; - } - } - - /* This reserves IO space but doesn't actually enable it */ return pcmcia_request_io(p_dev); } @@ -1118,6 +1035,8 @@ static void daqp_cs_config(struct pcmcia_device *link) dev_dbg(&link->dev, "daqp_cs_config\n"); + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; + ret = pcmcia_loop_config(link, daqp_pcmcia_config_loop, NULL); if (ret) { dev_warn(&link->dev, "no configuration found\n"); @@ -1128,25 +1047,10 @@ static void daqp_cs_config(struct pcmcia_device *link) if (ret) goto failed; - /* - This actually configures the PCMCIA socket -- setting up - the I/O windows and the interrupt mapping, and putting the - card and host interface into "Memory and IO" mode. - */ - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; - /* Finally, report what we've done */ - dev_info(&link->dev, "index 0x%02x", link->conf.ConfigIndex); - if (link->conf.Attributes & CONF_ENABLE_IRQ) - printk(", irq %u", link->irq); - if (link->resource[0]) - printk(" & %pR", link->resource[0]); - if (link->resource[1]) - printk(" & %pR", link->resource[1]); - printk("\n"); - return; failed: @@ -1161,18 +1065,6 @@ static void daqp_cs_release(struct pcmcia_device *link) pcmcia_disable_device(link); } /* daqp_cs_release */ -/*====================================================================== - - The card status event handler. Mostly, this schedules other - stuff to run after an event is received. - - When a CARD_REMOVAL event is received, we immediately set a - private flag to block future accesses to this device. All the - functions that actually access the device should check this flag - to make sure the card is still present. - -======================================================================*/ - static int daqp_cs_suspend(struct pcmcia_device *link) { struct local_info_t *local = link->priv; @@ -1212,9 +1104,7 @@ static struct pcmcia_driver daqp_cs_driver = { .resume = daqp_cs_resume, .id_table = daqp_cs_id_table, .owner = THIS_MODULE, - .drv = { - .name = "quatech_daqp_cs", - }, + .name = "quatech_daqp_cs", }; int __init init_module(void) diff --git a/drivers/staging/crystalhd/crystalhd_lnx.c b/drivers/staging/crystalhd/crystalhd_lnx.c index fbb80f09a3d9..af258991fe7f 100644 --- a/drivers/staging/crystalhd/crystalhd_lnx.c +++ b/drivers/staging/crystalhd/crystalhd_lnx.c @@ -351,6 +351,7 @@ static const struct file_operations chd_dec_fops = { .unlocked_ioctl = chd_dec_ioctl, .open = chd_dec_open, .release = chd_dec_close, + .llseek = noop_llseek, }; static int __devinit chd_dec_init_chdev(struct crystalhd_adp *adp) diff --git a/drivers/staging/cx25821/Kconfig b/drivers/staging/cx25821/Kconfig index df7756a95fad..813cb355ac01 100644 --- a/drivers/staging/cx25821/Kconfig +++ b/drivers/staging/cx25821/Kconfig @@ -1,6 +1,7 @@ config VIDEO_CX25821 tristate "Conexant cx25821 support" depends on DVB_CORE && VIDEO_DEV && PCI && I2C && INPUT + depends on BKL # please fix select I2C_ALGOBIT select VIDEO_BTCX select VIDEO_TVEEPROM diff --git a/drivers/staging/dream/camera/msm_camera.c b/drivers/staging/dream/camera/msm_camera.c index 81bd71fd816e..de4ab61efd4b 100644 --- a/drivers/staging/dream/camera/msm_camera.c +++ b/drivers/staging/dream/camera/msm_camera.c @@ -1941,6 +1941,7 @@ static const struct file_operations msm_fops_config = { .open = msm_open, .unlocked_ioctl = msm_ioctl_config, .release = msm_release_config, + .llseek = no_llseek, }; static const struct file_operations msm_fops_control = { @@ -1948,6 +1949,7 @@ static const struct file_operations msm_fops_control = { .open = msm_open_control, .unlocked_ioctl = msm_ioctl_control, .release = msm_release_control, + .llseek = no_llseek, }; static const struct file_operations msm_fops_frame = { @@ -1956,6 +1958,7 @@ static const struct file_operations msm_fops_frame = { .unlocked_ioctl = msm_ioctl_frame, .release = msm_release_frame, .poll = msm_poll_frame, + .llseek = no_llseek, }; static int msm_setup_cdev(struct msm_device *msm, diff --git a/drivers/staging/dream/pmem.c b/drivers/staging/dream/pmem.c index 7d6bbadd7fc7..3640d1f2376d 100644 --- a/drivers/staging/dream/pmem.c +++ b/drivers/staging/dream/pmem.c @@ -180,6 +180,7 @@ const struct file_operations pmem_fops = { .mmap = pmem_mmap, .open = pmem_open, .unlocked_ioctl = pmem_ioctl, + .llseek = noop_llseek, }; static int get_id(struct file *file) @@ -1204,6 +1205,7 @@ static ssize_t debug_read(struct file *file, char __user *buf, size_t count, static struct file_operations debug_fops = { .read = debug_read, .open = debug_open, + .llseek = default_llseek, }; #endif diff --git a/drivers/staging/dream/qdsp5/adsp_driver.c b/drivers/staging/dream/qdsp5/adsp_driver.c index 8197765aae1e..28a6f8da9477 100644 --- a/drivers/staging/dream/qdsp5/adsp_driver.c +++ b/drivers/staging/dream/qdsp5/adsp_driver.c @@ -582,6 +582,7 @@ static struct file_operations adsp_fops = { .open = adsp_open, .unlocked_ioctl = adsp_ioctl, .release = adsp_release, + .llseek = no_llseek, }; static void adsp_create(struct adsp_device *adev, const char *name, diff --git a/drivers/staging/dream/qdsp5/audio_aac.c b/drivers/staging/dream/qdsp5/audio_aac.c index a373f3522384..45f4c78ab6e7 100644 --- a/drivers/staging/dream/qdsp5/audio_aac.c +++ b/drivers/staging/dream/qdsp5/audio_aac.c @@ -1030,6 +1030,7 @@ static struct file_operations audio_aac_fops = { .read = audio_read, .write = audio_write, .unlocked_ioctl = audio_ioctl, + .llseek = noop_llseek, }; struct miscdevice audio_aac_misc = { diff --git a/drivers/staging/dream/qdsp5/audio_amrnb.c b/drivers/staging/dream/qdsp5/audio_amrnb.c index 07b79d5836e5..402bbc13281a 100644 --- a/drivers/staging/dream/qdsp5/audio_amrnb.c +++ b/drivers/staging/dream/qdsp5/audio_amrnb.c @@ -841,6 +841,7 @@ static struct file_operations audio_amrnb_fops = { .read = audamrnb_read, .write = audamrnb_write, .unlocked_ioctl = audamrnb_ioctl, + .llseek = noop_llseek, }; struct miscdevice audio_amrnb_misc = { diff --git a/drivers/staging/dream/qdsp5/audio_evrc.c b/drivers/staging/dream/qdsp5/audio_evrc.c index ad989ee87690..24a892647370 100644 --- a/drivers/staging/dream/qdsp5/audio_evrc.c +++ b/drivers/staging/dream/qdsp5/audio_evrc.c @@ -813,6 +813,7 @@ static struct file_operations audio_evrc_fops = { .read = audevrc_read, .write = audevrc_write, .unlocked_ioctl = audevrc_ioctl, + .llseek = noop_llseek, }; struct miscdevice audio_evrc_misc = { diff --git a/drivers/staging/dream/qdsp5/audio_in.c b/drivers/staging/dream/qdsp5/audio_in.c index 6ae48e72d145..b51fa096074e 100644 --- a/drivers/staging/dream/qdsp5/audio_in.c +++ b/drivers/staging/dream/qdsp5/audio_in.c @@ -921,12 +921,14 @@ static struct file_operations audio_fops = { .read = audio_in_read, .write = audio_in_write, .unlocked_ioctl = audio_in_ioctl, + .llseek = noop_llseek, }; static struct file_operations audpre_fops = { .owner = THIS_MODULE, .open = audpre_open, .unlocked_ioctl = audpre_ioctl, + .llseek = noop_llseek, }; struct miscdevice audio_in_misc = { diff --git a/drivers/staging/dream/qdsp5/audio_mp3.c b/drivers/staging/dream/qdsp5/audio_mp3.c index 530e1f35eed3..409a19ce6039 100644 --- a/drivers/staging/dream/qdsp5/audio_mp3.c +++ b/drivers/staging/dream/qdsp5/audio_mp3.c @@ -948,6 +948,7 @@ static struct file_operations audio_mp3_fops = { .read = audio_read, .write = audio_write, .unlocked_ioctl = audio_ioctl, + .llseek = noop_llseek, }; struct miscdevice audio_mp3_misc = { diff --git a/drivers/staging/dream/qdsp5/audio_out.c b/drivers/staging/dream/qdsp5/audio_out.c index 76d7fa5667d5..d20e89541567 100644 --- a/drivers/staging/dream/qdsp5/audio_out.c +++ b/drivers/staging/dream/qdsp5/audio_out.c @@ -807,12 +807,14 @@ static struct file_operations audio_fops = { .read = audio_read, .write = audio_write, .unlocked_ioctl = audio_ioctl, + .llseek = noop_llseek, }; static struct file_operations audpp_fops = { .owner = THIS_MODULE, .open = audpp_open, .unlocked_ioctl = audpp_ioctl, + .llseek = noop_llseek, }; struct miscdevice audio_misc = { diff --git a/drivers/staging/dream/qdsp5/audio_qcelp.c b/drivers/staging/dream/qdsp5/audio_qcelp.c index effa96f34fdc..911bab416b85 100644 --- a/drivers/staging/dream/qdsp5/audio_qcelp.c +++ b/drivers/staging/dream/qdsp5/audio_qcelp.c @@ -824,6 +824,7 @@ static struct file_operations audio_qcelp_fops = { .read = audqcelp_read, .write = audqcelp_write, .unlocked_ioctl = audqcelp_ioctl, + .llseek = noop_llseek, }; struct miscdevice audio_qcelp_misc = { diff --git a/drivers/staging/dream/qdsp5/evlog.h b/drivers/staging/dream/qdsp5/evlog.h index 922ce670a32a..e5ab86b9dd7c 100644 --- a/drivers/staging/dream/qdsp5/evlog.h +++ b/drivers/staging/dream/qdsp5/evlog.h @@ -123,6 +123,7 @@ static int ev_log_open(struct inode *inode, struct file *file) static const struct file_operations ev_log_ops = { .read = ev_log_read, .open = ev_log_open, + .llseek = default_llseek, }; static int ev_log_init(struct ev_log *log) diff --git a/drivers/staging/dream/qdsp5/snd.c b/drivers/staging/dream/qdsp5/snd.c index 037d7ffb7e67..e0f2f7bca29e 100644 --- a/drivers/staging/dream/qdsp5/snd.c +++ b/drivers/staging/dream/qdsp5/snd.c @@ -247,6 +247,7 @@ static struct file_operations snd_fops = { .open = snd_open, .release = snd_release, .unlocked_ioctl = snd_ioctl, + .llseek = noop_llseek, }; struct miscdevice snd_misc = { diff --git a/drivers/staging/easycap/Kconfig b/drivers/staging/easycap/Kconfig index bd96f39f2735..9d5fe4ddc30a 100644 --- a/drivers/staging/easycap/Kconfig +++ b/drivers/staging/easycap/Kconfig @@ -1,6 +1,7 @@ config EASYCAP tristate "EasyCAP USB ID 05e1:0408 support" depends on USB && VIDEO_DEV + depends on BKL # please fix ---help--- This is an integrated audio/video driver for EasyCAP cards with diff --git a/drivers/staging/frontier/alphatrack.c b/drivers/staging/frontier/alphatrack.c index 4e52105e6070..689099b57fd2 100644 --- a/drivers/staging/frontier/alphatrack.c +++ b/drivers/staging/frontier/alphatrack.c @@ -641,6 +641,7 @@ static const struct file_operations usb_alphatrack_fops = { .open = usb_alphatrack_open, .release = usb_alphatrack_release, .poll = usb_alphatrack_poll, + .llseek = no_llseek, }; /* diff --git a/drivers/staging/frontier/tranzport.c b/drivers/staging/frontier/tranzport.c index eed74f0fe0b6..3d12c1737edc 100644 --- a/drivers/staging/frontier/tranzport.c +++ b/drivers/staging/frontier/tranzport.c @@ -767,6 +767,7 @@ static const struct file_operations usb_tranzport_fops = { .open = usb_tranzport_open, .release = usb_tranzport_release, .poll = usb_tranzport_poll, + .llseek = no_llseek, }; /* diff --git a/drivers/staging/go7007/Kconfig b/drivers/staging/go7007/Kconfig index e47f683a323e..75fa46805527 100644 --- a/drivers/staging/go7007/Kconfig +++ b/drivers/staging/go7007/Kconfig @@ -1,6 +1,7 @@ config VIDEO_GO7007 tristate "WIS GO7007 MPEG encoder support" depends on VIDEO_DEV && PCI && I2C && INPUT + depends on BKL # please fix depends on SND select VIDEOBUF_DMA_SG select VIDEO_IR diff --git a/drivers/staging/hv/blkvsc_drv.c b/drivers/staging/hv/blkvsc_drv.c index ff1d24720f11..8284297b30e9 100644 --- a/drivers/staging/hv/blkvsc_drv.c +++ b/drivers/staging/hv/blkvsc_drv.c @@ -25,7 +25,7 @@ #include <linux/major.h> #include <linux/delay.h> #include <linux/hdreg.h> -#include <linux/smp_lock.h> +#include <linux/mutex.h> #include <linux/slab.h> #include <scsi/scsi.h> #include <scsi/scsi_cmnd.h> @@ -124,6 +124,7 @@ struct blkvsc_driver_context { }; /* Static decl */ +static DEFINE_MUTEX(blkvsc_mutex); static int blkvsc_probe(struct device *dev); static int blkvsc_remove(struct device *device); static void blkvsc_shutdown(struct device *device); @@ -1309,7 +1310,7 @@ static int blkvsc_open(struct block_device *bdev, fmode_t mode) DPRINT_DBG(BLKVSC_DRV, "- users %d disk %s\n", blkdev->users, blkdev->gd->disk_name); - lock_kernel(); + mutex_lock(&blkvsc_mutex); spin_lock(&blkdev->lock); if (!blkdev->users && blkdev->device_type == DVD_TYPE) { @@ -1321,7 +1322,7 @@ static int blkvsc_open(struct block_device *bdev, fmode_t mode) blkdev->users++; spin_unlock(&blkdev->lock); - unlock_kernel(); + mutex_unlock(&blkvsc_mutex); return 0; } @@ -1332,7 +1333,7 @@ static int blkvsc_release(struct gendisk *disk, fmode_t mode) DPRINT_DBG(BLKVSC_DRV, "- users %d disk %s\n", blkdev->users, blkdev->gd->disk_name); - lock_kernel(); + mutex_lock(&blkvsc_mutex); spin_lock(&blkdev->lock); if (blkdev->users == 1) { spin_unlock(&blkdev->lock); @@ -1343,7 +1344,7 @@ static int blkvsc_release(struct gendisk *disk, fmode_t mode) blkdev->users--; spin_unlock(&blkdev->lock); - unlock_kernel(); + mutex_unlock(&blkvsc_mutex); return 0; } diff --git a/drivers/staging/hv/netvsc_drv.c b/drivers/staging/hv/netvsc_drv.c index 56e11575c977..64a01147ecae 100644 --- a/drivers/staging/hv/netvsc_drv.c +++ b/drivers/staging/hv/netvsc_drv.c @@ -327,6 +327,9 @@ static const struct net_device_ops device_ops = { .ndo_stop = netvsc_close, .ndo_start_xmit = netvsc_start_xmit, .ndo_set_multicast_list = netvsc_set_multicast_list, + .ndo_change_mtu = eth_change_mtu, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_mac_address = eth_mac_addr, }; static int netvsc_probe(struct device *device) diff --git a/drivers/staging/hv/ring_buffer.c b/drivers/staging/hv/ring_buffer.c index 17bc7626f70a..d78c569ac94a 100644 --- a/drivers/staging/hv/ring_buffer.c +++ b/drivers/staging/hv/ring_buffer.c @@ -193,8 +193,7 @@ Description: static inline u64 GetRingBufferIndices(struct hv_ring_buffer_info *RingInfo) { - return ((u64)RingInfo->RingBuffer->WriteIndex << 32) - || RingInfo->RingBuffer->ReadIndex; + return (u64)RingInfo->RingBuffer->WriteIndex << 32; } diff --git a/drivers/staging/hv/storvsc_api.h b/drivers/staging/hv/storvsc_api.h index 0063bde9a4b2..8505a1c5f9ee 100644 --- a/drivers/staging/hv/storvsc_api.h +++ b/drivers/staging/hv/storvsc_api.h @@ -28,10 +28,10 @@ #include "vmbus_api.h" /* Defines */ -#define STORVSC_RING_BUFFER_SIZE (10*PAGE_SIZE) +#define STORVSC_RING_BUFFER_SIZE (20*PAGE_SIZE) #define BLKVSC_RING_BUFFER_SIZE (20*PAGE_SIZE) -#define STORVSC_MAX_IO_REQUESTS 64 +#define STORVSC_MAX_IO_REQUESTS 128 /* * In Hyper-V, each port/path/target maps to 1 scsi host adapter. In diff --git a/drivers/staging/hv/storvsc_drv.c b/drivers/staging/hv/storvsc_drv.c index 075b61bd492f..62882a437aa4 100644 --- a/drivers/staging/hv/storvsc_drv.c +++ b/drivers/staging/hv/storvsc_drv.c @@ -495,7 +495,7 @@ static unsigned int copy_to_bounce_buffer(struct scatterlist *orig_sgl, /* ASSERT(orig_sgl[i].offset + orig_sgl[i].length <= PAGE_SIZE); */ - if (j == 0) + if (bounce_addr == 0) bounce_addr = (unsigned long)kmap_atomic(sg_page((&bounce_sgl[j])), KM_IRQ0); while (srclen) { @@ -556,7 +556,7 @@ static unsigned int copy_from_bounce_buffer(struct scatterlist *orig_sgl, destlen = orig_sgl[i].length; /* ASSERT(orig_sgl[i].offset + orig_sgl[i].length <= PAGE_SIZE); */ - if (j == 0) + if (bounce_addr == 0) bounce_addr = (unsigned long)kmap_atomic(sg_page((&bounce_sgl[j])), KM_IRQ0); while (destlen) { @@ -615,6 +615,7 @@ static int storvsc_queuecommand(struct scsi_cmnd *scmnd, unsigned int request_size = 0; int i; struct scatterlist *sgl; + unsigned int sg_count = 0; DPRINT_DBG(STORVSC_DRV, "scmnd %p dir %d, use_sg %d buf %p len %d " "queue depth %d tagged %d", scmnd, scmnd->sc_data_direction, @@ -697,6 +698,7 @@ static int storvsc_queuecommand(struct scsi_cmnd *scmnd, request->DataBuffer.Length = scsi_bufflen(scmnd); if (scsi_sg_count(scmnd)) { sgl = (struct scatterlist *)scsi_sglist(scmnd); + sg_count = scsi_sg_count(scmnd); /* check if we need to bounce the sgl */ if (do_bounce_buffer(sgl, scsi_sg_count(scmnd)) != -1) { @@ -731,15 +733,16 @@ static int storvsc_queuecommand(struct scsi_cmnd *scmnd, scsi_sg_count(scmnd)); sgl = cmd_request->bounce_sgl; + sg_count = cmd_request->bounce_sgl_count; } request->DataBuffer.Offset = sgl[0].offset; - for (i = 0; i < scsi_sg_count(scmnd); i++) { + for (i = 0; i < sg_count; i++) { DPRINT_DBG(STORVSC_DRV, "sgl[%d] len %d offset %d\n", i, sgl[i].length, sgl[i].offset); request->DataBuffer.PfnArray[i] = - page_to_pfn(sg_page((&sgl[i]))); + page_to_pfn(sg_page((&sgl[i]))); } } else if (scsi_sglist(scmnd)) { /* ASSERT(scsi_bufflen(scmnd) <= PAGE_SIZE); */ diff --git a/drivers/staging/iio/industrialio-core.c b/drivers/staging/iio/industrialio-core.c index dd4d87a8bcaf..92a212f064bd 100644 --- a/drivers/staging/iio/industrialio-core.c +++ b/drivers/staging/iio/industrialio-core.c @@ -349,6 +349,7 @@ static const struct file_operations iio_event_chrdev_fileops = { .release = iio_event_chrdev_release, .open = iio_event_chrdev_open, .owner = THIS_MODULE, + .llseek = noop_llseek, }; static void iio_event_dev_release(struct device *dev) diff --git a/drivers/staging/iio/industrialio-ring.c b/drivers/staging/iio/industrialio-ring.c index 6ab578e4f5f3..1c5f67253b82 100644 --- a/drivers/staging/iio/industrialio-ring.c +++ b/drivers/staging/iio/industrialio-ring.c @@ -133,6 +133,7 @@ static const struct file_operations iio_ring_fileops = { .release = iio_ring_release, .open = iio_ring_open, .owner = THIS_MODULE, + .llseek = noop_llseek, }; /** diff --git a/drivers/staging/lirc/lirc_imon.c b/drivers/staging/lirc/lirc_imon.c index 66493253042e..ed5c5fe022c9 100644 --- a/drivers/staging/lirc/lirc_imon.c +++ b/drivers/staging/lirc/lirc_imon.c @@ -115,7 +115,8 @@ static const struct file_operations display_fops = { .owner = THIS_MODULE, .open = &display_open, .write = &vfd_write, - .release = &display_close + .release = &display_close, + .llseek = noop_llseek, }; /* diff --git a/drivers/staging/lirc/lirc_it87.c b/drivers/staging/lirc/lirc_it87.c index ec11c0e949a0..543c5c3bf907 100644 --- a/drivers/staging/lirc/lirc_it87.c +++ b/drivers/staging/lirc/lirc_it87.c @@ -342,6 +342,7 @@ static const struct file_operations lirc_fops = { .unlocked_ioctl = lirc_ioctl, .open = lirc_open, .release = lirc_close, + .llseek = noop_llseek, }; static int set_use_inc(void *data) diff --git a/drivers/staging/lirc/lirc_sasem.c b/drivers/staging/lirc/lirc_sasem.c index 73166c3f581f..8f72a84f34ec 100644 --- a/drivers/staging/lirc/lirc_sasem.c +++ b/drivers/staging/lirc/lirc_sasem.c @@ -125,6 +125,7 @@ static const struct file_operations vfd_fops = { .write = &vfd_write, .unlocked_ioctl = &vfd_ioctl, .release = &vfd_close, + .llseek = noop_llseek, }; /* USB Device ID for Sasem USB Control Board */ diff --git a/drivers/staging/lirc/lirc_serial.c b/drivers/staging/lirc/lirc_serial.c index 9456f8e3f9ef..8da382492612 100644 --- a/drivers/staging/lirc/lirc_serial.c +++ b/drivers/staging/lirc/lirc_serial.c @@ -1058,6 +1058,7 @@ static const struct file_operations lirc_fops = { .poll = lirc_dev_fop_poll, .open = lirc_dev_fop_open, .release = lirc_dev_fop_close, + .llseek = no_llseek, }; static struct lirc_driver driver = { diff --git a/drivers/staging/lirc/lirc_sir.c b/drivers/staging/lirc/lirc_sir.c index eb08fa7138ba..2478871bd95e 100644 --- a/drivers/staging/lirc/lirc_sir.c +++ b/drivers/staging/lirc/lirc_sir.c @@ -459,6 +459,7 @@ static const struct file_operations lirc_fops = { .unlocked_ioctl = lirc_ioctl, .open = lirc_dev_fop_open, .release = lirc_dev_fop_close, + .llseek = no_llseek, }; static int set_use_inc(void *data) diff --git a/drivers/staging/memrar/memrar_handler.c b/drivers/staging/memrar/memrar_handler.c index a98b3f1f11e0..cfcaa8e5b8e6 100644 --- a/drivers/staging/memrar/memrar_handler.c +++ b/drivers/staging/memrar/memrar_handler.c @@ -890,6 +890,7 @@ static const struct file_operations memrar_fops = { .mmap = memrar_mmap, .open = memrar_open, .release = memrar_release, + .llseek = no_llseek, }; static struct miscdevice memrar_miscdev = { diff --git a/drivers/staging/octeon/Kconfig b/drivers/staging/octeon/Kconfig index 638ad6b35891..9493128e5fd2 100644 --- a/drivers/staging/octeon/Kconfig +++ b/drivers/staging/octeon/Kconfig @@ -1,6 +1,6 @@ config OCTEON_ETHERNET tristate "Cavium Networks Octeon Ethernet support" - depends on CPU_CAVIUM_OCTEON + depends on CPU_CAVIUM_OCTEON && NETDEVICES select PHYLIB select MDIO_OCTEON help diff --git a/drivers/staging/panel/panel.c b/drivers/staging/panel/panel.c index 3221814a856e..6885f9a46609 100644 --- a/drivers/staging/panel/panel.c +++ b/drivers/staging/panel/panel.c @@ -1631,6 +1631,7 @@ static const struct file_operations keypad_fops = { .read = keypad_read, /* read */ .open = keypad_open, /* open */ .release = keypad_release, /* close */ + .llseek = default_llseek, }; static struct miscdevice keypad_dev = { diff --git a/drivers/staging/rt2860/usb_main_dev.c b/drivers/staging/rt2860/usb_main_dev.c index a0fe31de0a6d..ebf9074a9083 100644 --- a/drivers/staging/rt2860/usb_main_dev.c +++ b/drivers/staging/rt2860/usb_main_dev.c @@ -44,6 +44,7 @@ struct usb_device_id rtusb_usb_id[] = { {USB_DEVICE(0x07B8, 0x2870)}, /* AboCom */ {USB_DEVICE(0x07B8, 0x2770)}, /* AboCom */ {USB_DEVICE(0x0DF6, 0x0039)}, /* Sitecom 2770 */ + {USB_DEVICE(0x0DF6, 0x003F)}, /* Sitecom 2770 */ {USB_DEVICE(0x083A, 0x7512)}, /* Arcadyan 2770 */ {USB_DEVICE(0x0789, 0x0162)}, /* Logitec 2870 */ {USB_DEVICE(0x0789, 0x0163)}, /* Logitec 2870 */ @@ -95,7 +96,8 @@ struct usb_device_id rtusb_usb_id[] = { {USB_DEVICE(0x050d, 0x815c)}, {USB_DEVICE(0x1482, 0x3C09)}, /* Abocom */ {USB_DEVICE(0x14B2, 0x3C09)}, /* Alpha */ - {USB_DEVICE(0x04E8, 0x2018)}, /* samsung */ + {USB_DEVICE(0x04E8, 0x2018)}, /* samsung linkstick2 */ + {USB_DEVICE(0x1690, 0x0740)}, /* Askey */ {USB_DEVICE(0x5A57, 0x0280)}, /* Zinwell */ {USB_DEVICE(0x5A57, 0x0282)}, /* Zinwell */ {USB_DEVICE(0x7392, 0x7718)}, @@ -105,21 +107,34 @@ struct usb_device_id rtusb_usb_id[] = { {USB_DEVICE(0x1737, 0x0071)}, /* Linksys WUSB600N */ {USB_DEVICE(0x0411, 0x00e8)}, /* Buffalo WLI-UC-G300N */ {USB_DEVICE(0x050d, 0x815c)}, /* Belkin F5D8053 */ + {USB_DEVICE(0x100D, 0x9031)}, /* Motorola 2770 */ #endif /* RT2870 // */ #ifdef RT3070 {USB_DEVICE(0x148F, 0x3070)}, /* Ralink 3070 */ {USB_DEVICE(0x148F, 0x3071)}, /* Ralink 3071 */ {USB_DEVICE(0x148F, 0x3072)}, /* Ralink 3072 */ {USB_DEVICE(0x0DB0, 0x3820)}, /* Ralink 3070 */ + {USB_DEVICE(0x0DB0, 0x871C)}, /* Ralink 3070 */ + {USB_DEVICE(0x0DB0, 0x822C)}, /* Ralink 3070 */ + {USB_DEVICE(0x0DB0, 0x871B)}, /* Ralink 3070 */ + {USB_DEVICE(0x0DB0, 0x822B)}, /* Ralink 3070 */ {USB_DEVICE(0x0DF6, 0x003E)}, /* Sitecom 3070 */ {USB_DEVICE(0x0DF6, 0x0042)}, /* Sitecom 3072 */ + {USB_DEVICE(0x0DF6, 0x0048)}, /* Sitecom 3070 */ + {USB_DEVICE(0x0DF6, 0x0047)}, /* Sitecom 3071 */ {USB_DEVICE(0x14B2, 0x3C12)}, /* AL 3070 */ {USB_DEVICE(0x18C5, 0x0012)}, /* Corega 3070 */ {USB_DEVICE(0x083A, 0x7511)}, /* Arcadyan 3070 */ + {USB_DEVICE(0x083A, 0xA701)}, /* SMC 3070 */ + {USB_DEVICE(0x083A, 0xA702)}, /* SMC 3072 */ {USB_DEVICE(0x1740, 0x9703)}, /* EnGenius 3070 */ {USB_DEVICE(0x1740, 0x9705)}, /* EnGenius 3071 */ {USB_DEVICE(0x1740, 0x9706)}, /* EnGenius 3072 */ + {USB_DEVICE(0x1740, 0x9707)}, /* EnGenius 3070 */ + {USB_DEVICE(0x1740, 0x9708)}, /* EnGenius 3071 */ + {USB_DEVICE(0x1740, 0x9709)}, /* EnGenius 3072 */ {USB_DEVICE(0x13D3, 0x3273)}, /* AzureWave 3070 */ + {USB_DEVICE(0x13D3, 0x3305)}, /* AzureWave 3070*/ {USB_DEVICE(0x1044, 0x800D)}, /* Gigabyte GN-WB32L 3070 */ {USB_DEVICE(0x2019, 0xAB25)}, /* Planex Communications, Inc. RT3070 */ {USB_DEVICE(0x07B8, 0x3070)}, /* AboCom 3070 */ @@ -132,14 +147,36 @@ struct usb_device_id rtusb_usb_id[] = { {USB_DEVICE(0x07D1, 0x3C0D)}, /* D-Link 3070 */ {USB_DEVICE(0x07D1, 0x3C0E)}, /* D-Link 3070 */ {USB_DEVICE(0x07D1, 0x3C0F)}, /* D-Link 3070 */ + {USB_DEVICE(0x07D1, 0x3C16)}, /* D-Link 3070 */ + {USB_DEVICE(0x07D1, 0x3C17)}, /* D-Link 8070 */ {USB_DEVICE(0x1D4D, 0x000C)}, /* Pegatron Corporation 3070 */ {USB_DEVICE(0x1D4D, 0x000E)}, /* Pegatron Corporation 3070 */ {USB_DEVICE(0x5A57, 0x5257)}, /* Zinwell 3070 */ {USB_DEVICE(0x5A57, 0x0283)}, /* Zinwell 3072 */ {USB_DEVICE(0x04BB, 0x0945)}, /* I-O DATA 3072 */ + {USB_DEVICE(0x04BB, 0x0947)}, /* I-O DATA 3070 */ + {USB_DEVICE(0x04BB, 0x0948)}, /* I-O DATA 3072 */ {USB_DEVICE(0x203D, 0x1480)}, /* Encore 3070 */ + {USB_DEVICE(0x20B8, 0x8888)}, /* PARA INDUSTRIAL 3070 */ + {USB_DEVICE(0x0B05, 0x1784)}, /* Asus 3072 */ + {USB_DEVICE(0x203D, 0x14A9)}, /* Encore 3070*/ + {USB_DEVICE(0x0DB0, 0x899A)}, /* MSI 3070*/ + {USB_DEVICE(0x0DB0, 0x3870)}, /* MSI 3070*/ + {USB_DEVICE(0x0DB0, 0x870A)}, /* MSI 3070*/ + {USB_DEVICE(0x0DB0, 0x6899)}, /* MSI 3070 */ + {USB_DEVICE(0x0DB0, 0x3822)}, /* MSI 3070 */ + {USB_DEVICE(0x0DB0, 0x3871)}, /* MSI 3070 */ + {USB_DEVICE(0x0DB0, 0x871A)}, /* MSI 3070 */ + {USB_DEVICE(0x0DB0, 0x822A)}, /* MSI 3070 */ + {USB_DEVICE(0x0DB0, 0x3821)}, /* Ralink 3070 */ + {USB_DEVICE(0x0DB0, 0x821A)}, /* Ralink 3070 */ + {USB_DEVICE(0x083A, 0xA703)}, /* IO-MAGIC */ + {USB_DEVICE(0x13D3, 0x3307)}, /* Azurewave */ + {USB_DEVICE(0x13D3, 0x3321)}, /* Azurewave */ + {USB_DEVICE(0x07FA, 0x7712)}, /* Edimax */ + {USB_DEVICE(0x0789, 0x0166)}, /* Edimax */ + {USB_DEVICE(0x148F, 0x2070)}, /* Edimax */ #endif /* RT3070 // */ - {USB_DEVICE(0x0DF6, 0x003F)}, /* Sitecom WL-608 */ {USB_DEVICE(0x1737, 0x0077)}, /* Linksys WUSB54GC-EU v3 */ {USB_DEVICE(0x2001, 0x3C09)}, /* D-Link */ {USB_DEVICE(0x2001, 0x3C0A)}, /* D-Link 3072 */ diff --git a/drivers/staging/spectra/Kconfig b/drivers/staging/spectra/Kconfig index 5e2ffefb60af..d231ae27299d 100644 --- a/drivers/staging/spectra/Kconfig +++ b/drivers/staging/spectra/Kconfig @@ -2,6 +2,7 @@ menuconfig SPECTRA tristate "Denali Spectra Flash Translation Layer" depends on BLOCK + depends on X86_MRST default n ---help--- Enable the FTL pseudo-filesystem used with the NAND Flash diff --git a/drivers/staging/spectra/ffsport.c b/drivers/staging/spectra/ffsport.c index 44a7fbe7eccd..c7932da03c56 100644 --- a/drivers/staging/spectra/ffsport.c +++ b/drivers/staging/spectra/ffsport.c @@ -27,7 +27,7 @@ #include <linux/kthread.h> #include <linux/log2.h> #include <linux/init.h> -#include <linux/smp_lock.h> +#include <linux/slab.h> /**** Helper functions used for Div, Remainder operation on u64 ****/ @@ -589,14 +589,16 @@ int GLOB_SBD_ioctl(struct block_device *bdev, fmode_t mode, return -ENOTTY; } +static DEFINE_MUTEX(ffsport_mutex); + int GLOB_SBD_unlocked_ioctl(struct block_device *bdev, fmode_t mode, unsigned int cmd, unsigned long arg) { int ret; - lock_kernel(); + mutex_lock(&ffsport_mutex); ret = GLOB_SBD_ioctl(bdev, mode, cmd, arg); - unlock_kernel(); + mutex_unlock(&ffsport_mutex); return ret; } diff --git a/drivers/staging/ti-st/st.h b/drivers/staging/ti-st/st.h index 9952579425b9..1b3060eb2921 100644 --- a/drivers/staging/ti-st/st.h +++ b/drivers/staging/ti-st/st.h @@ -80,5 +80,4 @@ struct st_proto_s { extern long st_register(struct st_proto_s *); extern long st_unregister(enum proto_type); -extern struct platform_device *st_get_plat_device(void); #endif /* ST_H */ diff --git a/drivers/staging/ti-st/st_core.c b/drivers/staging/ti-st/st_core.c index 063c9b1db1ab..b85d8bfdf600 100644 --- a/drivers/staging/ti-st/st_core.c +++ b/drivers/staging/ti-st/st_core.c @@ -38,7 +38,6 @@ #include "st_ll.h" #include "st.h" -#define VERBOSE /* strings to be used for rfkill entries and by * ST Core to be used for sysfs debug entry */ @@ -581,7 +580,7 @@ long st_register(struct st_proto_s *new_proto) long err = 0; unsigned long flags = 0; - st_kim_ref(&st_gdata); + st_kim_ref(&st_gdata, 0); pr_info("%s(%d) ", __func__, new_proto->type); if (st_gdata == NULL || new_proto == NULL || new_proto->recv == NULL || new_proto->reg_complete_cb == NULL) { @@ -713,7 +712,7 @@ long st_unregister(enum proto_type type) pr_debug("%s: %d ", __func__, type); - st_kim_ref(&st_gdata); + st_kim_ref(&st_gdata, 0); if (type < ST_BT || type >= ST_MAX) { pr_err(" protocol %d not supported", type); return -EPROTONOSUPPORT; @@ -767,7 +766,7 @@ long st_write(struct sk_buff *skb) #endif long len; - st_kim_ref(&st_gdata); + st_kim_ref(&st_gdata, 0); if (unlikely(skb == NULL || st_gdata == NULL || st_gdata->tty == NULL)) { pr_err("data/tty unavailable to perform write"); @@ -818,7 +817,7 @@ static int st_tty_open(struct tty_struct *tty) struct st_data_s *st_gdata; pr_info("%s ", __func__); - st_kim_ref(&st_gdata); + st_kim_ref(&st_gdata, 0); st_gdata->tty = tty; tty->disc_data = st_gdata; diff --git a/drivers/staging/ti-st/st_core.h b/drivers/staging/ti-st/st_core.h index e0c32d149f5f..8601320a679e 100644 --- a/drivers/staging/ti-st/st_core.h +++ b/drivers/staging/ti-st/st_core.h @@ -117,7 +117,7 @@ int st_core_init(struct st_data_s **); void st_core_exit(struct st_data_s *); /* ask for reference from KIM */ -void st_kim_ref(struct st_data_s **); +void st_kim_ref(struct st_data_s **, int); #define GPS_STUB_TEST #ifdef GPS_STUB_TEST diff --git a/drivers/staging/ti-st/st_kim.c b/drivers/staging/ti-st/st_kim.c index b4a6c7fdc4e6..9e99463f76e8 100644 --- a/drivers/staging/ti-st/st_kim.c +++ b/drivers/staging/ti-st/st_kim.c @@ -72,11 +72,26 @@ const unsigned char *protocol_names[] = { PROTO_ENTRY(ST_GPS, "GPS"), }; +#define MAX_ST_DEVICES 3 /* Imagine 1 on each UART for now */ +struct platform_device *st_kim_devices[MAX_ST_DEVICES]; /**********************************************************************/ /* internal functions */ /** + * st_get_plat_device - + * function which returns the reference to the platform device + * requested by id. As of now only 1 such device exists (id=0) + * the context requesting for reference can get the id to be + * requested by a. The protocol driver which is registering or + * b. the tty device which is opened. + */ +static struct platform_device *st_get_plat_device(int id) +{ + return st_kim_devices[id]; +} + +/** * validate_firmware_response - * function to return whether the firmware response was proper * in case of error don't complete so that waiting for proper @@ -353,7 +368,7 @@ void st_kim_chip_toggle(enum proto_type type, enum kim_gpio_state state) struct kim_data_s *kim_gdata; pr_info(" %s ", __func__); - kim_pdev = st_get_plat_device(); + kim_pdev = st_get_plat_device(0); kim_gdata = dev_get_drvdata(&kim_pdev->dev); if (kim_gdata->gpios[type] == -1) { @@ -574,12 +589,12 @@ static int kim_toggle_radio(void *data, bool blocked) * This would enable multiple such platform devices to exist * on a given platform */ -void st_kim_ref(struct st_data_s **core_data) +void st_kim_ref(struct st_data_s **core_data, int id) { struct platform_device *pdev; struct kim_data_s *kim_gdata; /* get kim_gdata reference from platform device */ - pdev = st_get_plat_device(); + pdev = st_get_plat_device(id); kim_gdata = dev_get_drvdata(&pdev->dev); *core_data = kim_gdata->core_data; } @@ -623,6 +638,7 @@ static int kim_probe(struct platform_device *pdev) long *gpios = pdev->dev.platform_data; struct kim_data_s *kim_gdata; + st_kim_devices[pdev->id] = pdev; kim_gdata = kzalloc(sizeof(struct kim_data_s), GFP_ATOMIC); if (!kim_gdata) { pr_err("no mem to allocate"); diff --git a/drivers/staging/tidspbridge/rmgr/drv_interface.c b/drivers/staging/tidspbridge/rmgr/drv_interface.c index 7ee89492a755..7b3a7d04a109 100644 --- a/drivers/staging/tidspbridge/rmgr/drv_interface.c +++ b/drivers/staging/tidspbridge/rmgr/drv_interface.c @@ -144,6 +144,7 @@ static const struct file_operations bridge_fops = { .release = bridge_release, .unlocked_ioctl = bridge_ioctl, .mmap = bridge_mmap, + .llseek = noop_llseek, }; #ifdef CONFIG_PM diff --git a/drivers/staging/tm6000/Kconfig b/drivers/staging/tm6000/Kconfig index c725356cc346..de7ebb99d8f6 100644 --- a/drivers/staging/tm6000/Kconfig +++ b/drivers/staging/tm6000/Kconfig @@ -1,6 +1,6 @@ config VIDEO_TM6000 tristate "TV Master TM5600/6000/6010 driver" - depends on VIDEO_DEV && I2C && INPUT && USB && EXPERIMENTAL + depends on VIDEO_DEV && I2C && INPUT && IR_CORE && USB && EXPERIMENTAL select VIDEO_TUNER select MEDIA_TUNER_XC2028 select MEDIA_TUNER_XC5000 diff --git a/drivers/staging/tm6000/tm6000-input.c b/drivers/staging/tm6000/tm6000-input.c index 32f7a0af6938..54f7667cc706 100644 --- a/drivers/staging/tm6000/tm6000-input.c +++ b/drivers/staging/tm6000/tm6000-input.c @@ -46,7 +46,7 @@ MODULE_PARM_DESC(enable_ir, "enable ir (default is enable"); } struct tm6000_ir_poll_result { - u8 rc_data[4]; + u16 rc_data; }; struct tm6000_IR { @@ -60,9 +60,9 @@ struct tm6000_IR { int polling; struct delayed_work work; u8 wait:1; + u8 key:1; struct urb *int_urb; u8 *urb_data; - u8 key:1; int (*get_key) (struct tm6000_IR *, struct tm6000_ir_poll_result *); @@ -122,13 +122,14 @@ static void tm6000_ir_urb_received(struct urb *urb) if (urb->status != 0) printk(KERN_INFO "not ready\n"); - else if (urb->actual_length > 0) + else if (urb->actual_length > 0) { memcpy(ir->urb_data, urb->transfer_buffer, urb->actual_length); - dprintk("data %02x %02x %02x %02x\n", ir->urb_data[0], - ir->urb_data[1], ir->urb_data[2], ir->urb_data[3]); + dprintk("data %02x %02x %02x %02x\n", ir->urb_data[0], + ir->urb_data[1], ir->urb_data[2], ir->urb_data[3]); - ir->key = 1; + ir->key = 1; + } rc = usb_submit_urb(urb, GFP_ATOMIC); } @@ -140,30 +141,47 @@ static int default_polling_getkey(struct tm6000_IR *ir, int rc; u8 buf[2]; - if (ir->wait && !&dev->int_in) { - poll_result->rc_data[0] = 0xff; + if (ir->wait && !&dev->int_in) return 0; - } if (&dev->int_in) { - poll_result->rc_data[0] = ir->urb_data[0]; - poll_result->rc_data[1] = ir->urb_data[1]; + if (ir->ir.ir_type == IR_TYPE_RC5) + poll_result->rc_data = ir->urb_data[0]; + else + poll_result->rc_data = ir->urb_data[0] | ir->urb_data[1] << 8; } else { tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, 2, 0); msleep(10); tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, 2, 1); msleep(10); - rc = tm6000_read_write_usb(dev, USB_DIR_IN | USB_TYPE_VENDOR | - USB_RECIP_DEVICE, REQ_02_GET_IR_CODE, 0, 0, buf, 1); + if (ir->ir.ir_type == IR_TYPE_RC5) { + rc = tm6000_read_write_usb(dev, USB_DIR_IN | + USB_TYPE_VENDOR | USB_RECIP_DEVICE, + REQ_02_GET_IR_CODE, 0, 0, buf, 1); - msleep(10); + msleep(10); - dprintk("read data=%02x\n", buf[0]); - if (rc < 0) - return rc; + dprintk("read data=%02x\n", buf[0]); + if (rc < 0) + return rc; - poll_result->rc_data[0] = buf[0]; + poll_result->rc_data = buf[0]; + } else { + rc = tm6000_read_write_usb(dev, USB_DIR_IN | + USB_TYPE_VENDOR | USB_RECIP_DEVICE, + REQ_02_GET_IR_CODE, 0, 0, buf, 2); + + msleep(10); + + dprintk("read data=%04x\n", buf[0] | buf[1] << 8); + if (rc < 0) + return rc; + + poll_result->rc_data = buf[0] | buf[1] << 8; + } + if ((poll_result->rc_data & 0x00ff) != 0xff) + ir->key = 1; } return 0; } @@ -180,12 +198,11 @@ static void tm6000_ir_handle_key(struct tm6000_IR *ir) return; } - dprintk("ir->get_key result data=%02x %02x\n", - poll_result.rc_data[0], poll_result.rc_data[1]); + dprintk("ir->get_key result data=%04x\n", poll_result.rc_data); - if (poll_result.rc_data[0] != 0xff && ir->key == 1) { + if (ir->key) { ir_input_keydown(ir->input->input_dev, &ir->ir, - poll_result.rc_data[0] | poll_result.rc_data[1] << 8); + (u32)poll_result.rc_data); ir_input_nokey(ir->input->input_dev, &ir->ir); ir->key = 0; diff --git a/drivers/staging/usbip/Kconfig b/drivers/staging/usbip/Kconfig index 2c1d10acb8b5..b11ec379b5c2 100644 --- a/drivers/staging/usbip/Kconfig +++ b/drivers/staging/usbip/Kconfig @@ -1,6 +1,6 @@ config USB_IP_COMMON tristate "USB IP support (EXPERIMENTAL)" - depends on USB && NET && EXPERIMENTAL + depends on USB && NET && EXPERIMENTAL && BKL default N ---help--- This enables pushing USB packets over IP to allow remote diff --git a/drivers/staging/vt6655/wpactl.c b/drivers/staging/vt6655/wpactl.c index 0142338bcafe..4bdb8362de82 100644 --- a/drivers/staging/vt6655/wpactl.c +++ b/drivers/staging/vt6655/wpactl.c @@ -766,9 +766,14 @@ static int wpa_set_associate(PSDevice pDevice, DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "wpa_ie_len = %d\n", param->u.wpa_associate.wpa_ie_len); - if (param->u.wpa_associate.wpa_ie && - copy_from_user(&abyWPAIE[0], param->u.wpa_associate.wpa_ie, param->u.wpa_associate.wpa_ie_len)) - return -EINVAL; + if (param->u.wpa_associate.wpa_ie_len) { + if (!param->u.wpa_associate.wpa_ie) + return -EINVAL; + if (param->u.wpa_associate.wpa_ie_len > sizeof(abyWPAIE)) + return -EINVAL; + if (copy_from_user(&abyWPAIE[0], param->u.wpa_associate.wpa_ie, param->u.wpa_associate.wpa_ie_len)) + return -EFAULT; + } if (param->u.wpa_associate.mode == 1) pMgmt->eConfigMode = WMAC_CONFIG_IBSS_STA; diff --git a/drivers/staging/wlags49_h2/wl_cs.c b/drivers/staging/wlags49_h2/wl_cs.c index 19c335458653..6555891e149c 100644 --- a/drivers/staging/wlags49_h2/wl_cs.c +++ b/drivers/staging/wlags49_h2/wl_cs.c @@ -83,7 +83,6 @@ #include <linux/if_arp.h> #include <linux/ioport.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ciscode.h> @@ -147,10 +146,9 @@ static int wl_adapter_attach(struct pcmcia_device *link) link->resource[0]->end = HCF_NUM_IO_PORTS; link->resource[0]->flags= IO_DATA_PATH_WIDTH_16; - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; - link->conf.ConfigIndex = 5; - link->conf.Present = PRESENT_OPTION; + link->config_flags |= CONF_ENABLE_IRQ; + link->config_index = 5; + link->config_regs = PRESENT_OPTION; link->priv = dev; lp = wl_priv(dev); @@ -165,27 +163,6 @@ static int wl_adapter_attach(struct pcmcia_device *link) -/******************************************************************************* - * wl_adapter_detach() - ******************************************************************************* - * - * DESCRIPTION: - * - * This deletes a driver "instance". The device is de-registered with Card - * Services. If it has been released, then the net device is unregistered, and - * all local data structures are freed. Otherwise, the structures will be - * freed when the device is released. - * - * PARAMETERS: - * - * link - pointer to the dev_link_t structure representing the device to - * detach - * - * RETURNS: - * - * N/A - * - ******************************************************************************/ static void wl_adapter_detach(struct pcmcia_device *link) { struct net_device *dev = link->priv; @@ -209,26 +186,6 @@ static void wl_adapter_detach(struct pcmcia_device *link) /*============================================================================*/ -/******************************************************************************* - * wl_adapter_release() - ******************************************************************************* - * - * DESCRIPTION: - * - * After a card is removed, this routine will release the PCMCIA - * configuration. If the device is still open, this will be postponed until it - * is closed. - * - * PARAMETERS: - * - * arg - a u_long representing a pointer to a dev_link_t structure for the - * device to be released. - * - * RETURNS: - * - * N/A - * - ******************************************************************************/ void wl_adapter_release(struct pcmcia_device *link) { DBG_FUNC("wl_adapter_release"); @@ -268,26 +225,6 @@ static int wl_adapter_resume(struct pcmcia_device *link) return 0; } /* wl_adapter_resume */ -/******************************************************************************* - * wl_adapter_insert() - ******************************************************************************* - * - * DESCRIPTION: - * - * wl_adapter_insert() is scheduled to run after a CARD_INSERTION event is - * received, to configure the PCMCIA socket, and to make the ethernet device - * available to the system. - * - * PARAMETERS: - * - * link - pointer to the dev_link_t structure representing the device to - * insert - * - * RETURNS: - * - * N/A - * - ******************************************************************************/ void wl_adapter_insert(struct pcmcia_device *link) { struct net_device *dev; @@ -302,7 +239,7 @@ void wl_adapter_insert(struct pcmcia_device *link) dev = link->priv; /* Do we need to allocate an interrupt? */ - link->conf.Attributes |= CONF_ENABLE_IRQ; + link->config_flags |= CONF_ENABLE_IRQ; link->io_lines = 6; ret = pcmcia_request_io(link); @@ -313,7 +250,7 @@ void wl_adapter_insert(struct pcmcia_device *link) if (ret != 0) goto failed; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret != 0) goto failed; @@ -457,9 +394,7 @@ MODULE_DEVICE_TABLE(pcmcia, wl_adapter_ids); static struct pcmcia_driver wlags49_driver = { .owner = THIS_MODULE, - .drv = { - .name = DRIVER_NAME, - }, + .name = DRIVER_NAME, .probe = wl_adapter_attach, .remove = wl_adapter_detach, .id_table = wl_adapter_ids, diff --git a/drivers/staging/wlags49_h2/wl_internal.h b/drivers/staging/wlags49_h2/wl_internal.h index 02f0a20e178a..cd129b3ee6c0 100644 --- a/drivers/staging/wlags49_h2/wl_internal.h +++ b/drivers/staging/wlags49_h2/wl_internal.h @@ -69,7 +69,6 @@ ******************************************************************************/ #include <linux/version.h> #ifdef BUS_PCMCIA -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ciscode.h> diff --git a/drivers/staging/wlags49_h2/wl_main.c b/drivers/staging/wlags49_h2/wl_main.c index 88d0d472142f..8e3536acbf46 100644 --- a/drivers/staging/wlags49_h2/wl_main.c +++ b/drivers/staging/wlags49_h2/wl_main.c @@ -414,25 +414,6 @@ extern memimage fw_image; // firmware image to be downloaded #endif /* HCF_STA */ -/******************************************************************************* - * wl_insert() - ******************************************************************************* - * - * DESCRIPTION: - * - * wl_insert() is scheduled to run after a CARD_INSERTION event is - * received, to configure the PCMCIA socket, and to make the ethernet device - * available to the system. - * - * PARAMETERS: - * - * dev - a pointer to the net_device struct of the wireless device - * - * RETURNS: - * - * TRUE or FALSE - * - ******************************************************************************/ int wl_insert( struct net_device *dev ) { int result = 0; diff --git a/drivers/staging/wlan-ng/cfg80211.c b/drivers/staging/wlan-ng/cfg80211.c index 368c30a9d5ff..4af83d5318f2 100644 --- a/drivers/staging/wlan-ng/cfg80211.c +++ b/drivers/staging/wlan-ng/cfg80211.c @@ -219,6 +219,7 @@ int prism2_get_key(struct wiphy *wiphy, struct net_device *dev, return -ENOENT; params.key_len = len; params.key = wlandev->wep_keys[key_index]; + params.seq_len = 0; callback(cookie, ¶ms); @@ -735,6 +736,8 @@ struct wiphy *wlan_create_wiphy(struct device *dev, wlandevice_t *wlandev) priv->band.n_channels = ARRAY_SIZE(prism2_channels); priv->band.bitrates = priv->rates; priv->band.n_bitrates = ARRAY_SIZE(prism2_rates); + priv->band.band = IEEE80211_BAND_2GHZ; + priv->band.ht_cap.ht_supported = false; wiphy->bands[IEEE80211_BAND_2GHZ] = &priv->band; set_wiphy_dev(wiphy, dev); diff --git a/drivers/staging/zram/zram_drv.c b/drivers/staging/zram/zram_drv.c index 77d4d715a789..722c840ac638 100644 --- a/drivers/staging/zram/zram_drv.c +++ b/drivers/staging/zram/zram_drv.c @@ -769,6 +769,7 @@ static int __init zram_init(void) free_devices: while (dev_id) destroy_device(&devices[--dev_id]); + kfree(devices); unregister: unregister_blkdev(zram_major, "zram"); out: |