diff options
Diffstat (limited to 'drivers/spi')
-rw-r--r-- | drivers/spi/Kconfig | 5 | ||||
-rw-r--r-- | drivers/spi/spi-bfin5xx.c | 3 | ||||
-rw-r--r-- | drivers/spi/spi-dw-mid.c | 167 | ||||
-rw-r--r-- | drivers/spi/spi-dw.c | 306 | ||||
-rw-r--r-- | drivers/spi/spi-dw.h | 70 | ||||
-rw-r--r-- | drivers/spi/spi.c | 2 |
6 files changed, 220 insertions, 333 deletions
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index ab8dfbef6f1b..198f96b7fb45 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -159,10 +159,9 @@ config SPI_BUTTERFLY config SPI_CADENCE tristate "Cadence SPI controller" - depends on ARM help This selects the Cadence SPI controller master driver - used by Xilinx Zynq. + used by Xilinx Zynq and ZynqMP. config SPI_CLPS711X tristate "CLPS711X host SPI controller" @@ -632,7 +631,7 @@ config SPI_DW_PCI config SPI_DW_MID_DMA bool "DMA support for DW SPI controller on Intel MID platform" - depends on SPI_DW_PCI && INTEL_MID_DMAC + depends on SPI_DW_PCI && DW_DMAC_PCI config SPI_DW_MMIO tristate "Memory-mapped io interface driver for DW SPI core" diff --git a/drivers/spi/spi-bfin5xx.c b/drivers/spi/spi-bfin5xx.c index 37079937d2f7..a3d65b4f4944 100644 --- a/drivers/spi/spi-bfin5xx.c +++ b/drivers/spi/spi-bfin5xx.c @@ -559,7 +559,7 @@ static void bfin_spi_pump_transfers(unsigned long data) struct spi_transfer *previous = NULL; struct bfin_spi_slave_data *chip = NULL; unsigned int bits_per_word; - u16 cr, cr_width, dma_width, dma_config; + u16 cr, cr_width = 0, dma_width, dma_config; u32 tranf_success = 1; u8 full_duplex = 0; @@ -648,7 +648,6 @@ static void bfin_spi_pump_transfers(unsigned long data) } else if (bits_per_word == 8) { drv_data->n_bytes = bits_per_word/8; drv_data->len = transfer->len; - cr_width = 0; drv_data->ops = &bfin_bfin_spi_transfer_ops_u8; } cr = bfin_read(&drv_data->regs->ctl) & ~(BIT_CTL_TIMOD | BIT_CTL_WORDSIZE); diff --git a/drivers/spi/spi-dw-mid.c b/drivers/spi/spi-dw-mid.c index 4f8c798e0633..bb1052e748f2 100644 --- a/drivers/spi/spi-dw-mid.c +++ b/drivers/spi/spi-dw-mid.c @@ -23,29 +23,31 @@ #include "spi-dw.h" #ifdef CONFIG_SPI_DW_MID_DMA -#include <linux/intel_mid_dma.h> #include <linux/pci.h> +#include <linux/platform_data/dma-dw.h> #define RX_BUSY 0 #define TX_BUSY 1 -struct mid_dma { - struct intel_mid_dma_slave dmas_tx; - struct intel_mid_dma_slave dmas_rx; -}; +static struct dw_dma_slave mid_dma_tx = { .dst_id = 1 }; +static struct dw_dma_slave mid_dma_rx = { .src_id = 0 }; static bool mid_spi_dma_chan_filter(struct dma_chan *chan, void *param) { - struct dw_spi *dws = param; + struct dw_dma_slave *s = param; + + if (s->dma_dev != chan->device->dev) + return false; - return dws->dma_dev == chan->device->dev; + chan->private = s; + return true; } static int mid_spi_dma_init(struct dw_spi *dws) { - struct mid_dma *dw_dma = dws->dma_priv; struct pci_dev *dma_dev; - struct intel_mid_dma_slave *rxs, *txs; + struct dw_dma_slave *tx = dws->dma_tx; + struct dw_dma_slave *rx = dws->dma_rx; dma_cap_mask_t mask; /* @@ -56,28 +58,22 @@ static int mid_spi_dma_init(struct dw_spi *dws) if (!dma_dev) return -ENODEV; - dws->dma_dev = &dma_dev->dev; - dma_cap_zero(mask); dma_cap_set(DMA_SLAVE, mask); /* 1. Init rx channel */ - dws->rxchan = dma_request_channel(mask, mid_spi_dma_chan_filter, dws); + rx->dma_dev = &dma_dev->dev; + dws->rxchan = dma_request_channel(mask, mid_spi_dma_chan_filter, rx); if (!dws->rxchan) goto err_exit; - rxs = &dw_dma->dmas_rx; - rxs->hs_mode = LNW_DMA_HW_HS; - rxs->cfg_mode = LNW_DMA_PER_TO_MEM; - dws->rxchan->private = rxs; + dws->master->dma_rx = dws->rxchan; /* 2. Init tx channel */ - dws->txchan = dma_request_channel(mask, mid_spi_dma_chan_filter, dws); + tx->dma_dev = &dma_dev->dev; + dws->txchan = dma_request_channel(mask, mid_spi_dma_chan_filter, tx); if (!dws->txchan) goto free_rxchan; - txs = &dw_dma->dmas_tx; - txs->hs_mode = LNW_DMA_HW_HS; - txs->cfg_mode = LNW_DMA_MEM_TO_PER; - dws->txchan->private = txs; + dws->master->dma_tx = dws->txchan; dws->dma_inited = 1; return 0; @@ -100,6 +96,42 @@ static void mid_spi_dma_exit(struct dw_spi *dws) dma_release_channel(dws->rxchan); } +static irqreturn_t dma_transfer(struct dw_spi *dws) +{ + u16 irq_status = dw_readl(dws, DW_SPI_ISR); + + if (!irq_status) + return IRQ_NONE; + + dw_readl(dws, DW_SPI_ICR); + spi_reset_chip(dws); + + dev_err(&dws->master->dev, "%s: FIFO overrun/underrun\n", __func__); + dws->master->cur_msg->status = -EIO; + spi_finalize_current_transfer(dws->master); + return IRQ_HANDLED; +} + +static bool mid_spi_can_dma(struct spi_master *master, struct spi_device *spi, + struct spi_transfer *xfer) +{ + struct dw_spi *dws = spi_master_get_devdata(master); + + if (!dws->dma_inited) + return false; + + return xfer->len > dws->fifo_len; +} + +static enum dma_slave_buswidth convert_dma_width(u32 dma_width) { + if (dma_width == 1) + return DMA_SLAVE_BUSWIDTH_1_BYTE; + else if (dma_width == 2) + return DMA_SLAVE_BUSWIDTH_2_BYTES; + + return DMA_SLAVE_BUSWIDTH_UNDEFINED; +} + /* * dws->dma_chan_busy is set before the dma transfer starts, callback for tx * channel will clear a corresponding bit. @@ -111,33 +143,30 @@ static void dw_spi_dma_tx_done(void *arg) clear_bit(TX_BUSY, &dws->dma_chan_busy); if (test_bit(RX_BUSY, &dws->dma_chan_busy)) return; - dw_spi_xfer_done(dws); + spi_finalize_current_transfer(dws->master); } -static struct dma_async_tx_descriptor *dw_spi_dma_prepare_tx(struct dw_spi *dws) +static struct dma_async_tx_descriptor *dw_spi_dma_prepare_tx(struct dw_spi *dws, + struct spi_transfer *xfer) { struct dma_slave_config txconf; struct dma_async_tx_descriptor *txdesc; - if (!dws->tx_dma) + if (!xfer->tx_buf) return NULL; txconf.direction = DMA_MEM_TO_DEV; txconf.dst_addr = dws->dma_addr; - txconf.dst_maxburst = LNW_DMA_MSIZE_16; + txconf.dst_maxburst = 16; txconf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; - txconf.dst_addr_width = dws->dma_width; + txconf.dst_addr_width = convert_dma_width(dws->dma_width); txconf.device_fc = false; dmaengine_slave_config(dws->txchan, &txconf); - memset(&dws->tx_sgl, 0, sizeof(dws->tx_sgl)); - dws->tx_sgl.dma_address = dws->tx_dma; - dws->tx_sgl.length = dws->len; - txdesc = dmaengine_prep_slave_sg(dws->txchan, - &dws->tx_sgl, - 1, + xfer->tx_sg.sgl, + xfer->tx_sg.nents, DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); if (!txdesc) @@ -160,33 +189,30 @@ static void dw_spi_dma_rx_done(void *arg) clear_bit(RX_BUSY, &dws->dma_chan_busy); if (test_bit(TX_BUSY, &dws->dma_chan_busy)) return; - dw_spi_xfer_done(dws); + spi_finalize_current_transfer(dws->master); } -static struct dma_async_tx_descriptor *dw_spi_dma_prepare_rx(struct dw_spi *dws) +static struct dma_async_tx_descriptor *dw_spi_dma_prepare_rx(struct dw_spi *dws, + struct spi_transfer *xfer) { struct dma_slave_config rxconf; struct dma_async_tx_descriptor *rxdesc; - if (!dws->rx_dma) + if (!xfer->rx_buf) return NULL; rxconf.direction = DMA_DEV_TO_MEM; rxconf.src_addr = dws->dma_addr; - rxconf.src_maxburst = LNW_DMA_MSIZE_16; + rxconf.src_maxburst = 16; rxconf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; - rxconf.src_addr_width = dws->dma_width; + rxconf.src_addr_width = convert_dma_width(dws->dma_width); rxconf.device_fc = false; dmaengine_slave_config(dws->rxchan, &rxconf); - memset(&dws->rx_sgl, 0, sizeof(dws->rx_sgl)); - dws->rx_sgl.dma_address = dws->rx_dma; - dws->rx_sgl.length = dws->len; - rxdesc = dmaengine_prep_slave_sg(dws->rxchan, - &dws->rx_sgl, - 1, + xfer->rx_sg.sgl, + xfer->rx_sg.nents, DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); if (!rxdesc) @@ -198,37 +224,36 @@ static struct dma_async_tx_descriptor *dw_spi_dma_prepare_rx(struct dw_spi *dws) return rxdesc; } -static void dw_spi_dma_setup(struct dw_spi *dws) +static int mid_spi_dma_setup(struct dw_spi *dws, struct spi_transfer *xfer) { u16 dma_ctrl = 0; - spi_enable_chip(dws, 0); + dw_writel(dws, DW_SPI_DMARDLR, 0xf); + dw_writel(dws, DW_SPI_DMATDLR, 0x10); - dw_writew(dws, DW_SPI_DMARDLR, 0xf); - dw_writew(dws, DW_SPI_DMATDLR, 0x10); - - if (dws->tx_dma) + if (xfer->tx_buf) dma_ctrl |= SPI_DMA_TDMAE; - if (dws->rx_dma) + if (xfer->rx_buf) dma_ctrl |= SPI_DMA_RDMAE; - dw_writew(dws, DW_SPI_DMACR, dma_ctrl); + dw_writel(dws, DW_SPI_DMACR, dma_ctrl); + + /* Set the interrupt mask */ + spi_umask_intr(dws, SPI_INT_TXOI | SPI_INT_RXUI | SPI_INT_RXOI); - spi_enable_chip(dws, 1); + dws->transfer_handler = dma_transfer; + + return 0; } -static int mid_spi_dma_transfer(struct dw_spi *dws, int cs_change) +static int mid_spi_dma_transfer(struct dw_spi *dws, struct spi_transfer *xfer) { struct dma_async_tx_descriptor *txdesc, *rxdesc; - /* 1. setup DMA related registers */ - if (cs_change) - dw_spi_dma_setup(dws); + /* Prepare the TX dma transfer */ + txdesc = dw_spi_dma_prepare_tx(dws, xfer); - /* 2. Prepare the TX dma transfer */ - txdesc = dw_spi_dma_prepare_tx(dws); - - /* 3. Prepare the RX dma transfer */ - rxdesc = dw_spi_dma_prepare_rx(dws); + /* Prepare the RX dma transfer */ + rxdesc = dw_spi_dma_prepare_rx(dws, xfer); /* rx must be started before tx due to spi instinct */ if (rxdesc) { @@ -246,10 +271,25 @@ static int mid_spi_dma_transfer(struct dw_spi *dws, int cs_change) return 0; } +static void mid_spi_dma_stop(struct dw_spi *dws) +{ + if (test_bit(TX_BUSY, &dws->dma_chan_busy)) { + dmaengine_terminate_all(dws->txchan); + clear_bit(TX_BUSY, &dws->dma_chan_busy); + } + if (test_bit(RX_BUSY, &dws->dma_chan_busy)) { + dmaengine_terminate_all(dws->rxchan); + clear_bit(RX_BUSY, &dws->dma_chan_busy); + } +} + static struct dw_spi_dma_ops mid_dma_ops = { .dma_init = mid_spi_dma_init, .dma_exit = mid_spi_dma_exit, + .dma_setup = mid_spi_dma_setup, + .can_dma = mid_spi_can_dma, .dma_transfer = mid_spi_dma_transfer, + .dma_stop = mid_spi_dma_stop, }; #endif @@ -282,9 +322,8 @@ int dw_spi_mid_init(struct dw_spi *dws) iounmap(clk_reg); #ifdef CONFIG_SPI_DW_MID_DMA - dws->dma_priv = kzalloc(sizeof(struct mid_dma), GFP_KERNEL); - if (!dws->dma_priv) - return -ENOMEM; + dws->dma_tx = &mid_dma_tx; + dws->dma_rx = &mid_dma_rx; dws->dma_ops = &mid_dma_ops; #endif return 0; diff --git a/drivers/spi/spi-dw.c b/drivers/spi/spi-dw.c index 4847afba89f4..8d67d03c71eb 100644 --- a/drivers/spi/spi-dw.c +++ b/drivers/spi/spi-dw.c @@ -28,11 +28,6 @@ #include <linux/debugfs.h> #endif -#define START_STATE ((void *)0) -#define RUNNING_STATE ((void *)1) -#define DONE_STATE ((void *)2) -#define ERROR_STATE ((void *)-1) - /* Slave spi_dev related */ struct chip_data { u16 cr0; @@ -143,13 +138,26 @@ static inline void dw_spi_debugfs_remove(struct dw_spi *dws) } #endif /* CONFIG_DEBUG_FS */ +static void dw_spi_set_cs(struct spi_device *spi, bool enable) +{ + struct dw_spi *dws = spi_master_get_devdata(spi->master); + struct chip_data *chip = spi_get_ctldata(spi); + + /* Chip select logic is inverted from spi_set_cs() */ + if (chip && chip->cs_control) + chip->cs_control(!enable); + + if (!enable) + dw_writel(dws, DW_SPI_SER, BIT(spi->chip_select)); +} + /* Return the max entries we can fill into tx fifo */ static inline u32 tx_max(struct dw_spi *dws) { u32 tx_left, tx_room, rxtx_gap; tx_left = (dws->tx_end - dws->tx) / dws->n_bytes; - tx_room = dws->fifo_len - dw_readw(dws, DW_SPI_TXFLR); + tx_room = dws->fifo_len - dw_readl(dws, DW_SPI_TXFLR); /* * Another concern is about the tx/rx mismatch, we @@ -170,7 +178,7 @@ static inline u32 rx_max(struct dw_spi *dws) { u32 rx_left = (dws->rx_end - dws->rx) / dws->n_bytes; - return min_t(u32, rx_left, dw_readw(dws, DW_SPI_RXFLR)); + return min_t(u32, rx_left, dw_readl(dws, DW_SPI_RXFLR)); } static void dw_writer(struct dw_spi *dws) @@ -186,7 +194,7 @@ static void dw_writer(struct dw_spi *dws) else txw = *(u16 *)(dws->tx); } - dw_writew(dws, DW_SPI_DR, txw); + dw_writel(dws, DW_SPI_DR, txw); dws->tx += dws->n_bytes; } } @@ -197,7 +205,7 @@ static void dw_reader(struct dw_spi *dws) u16 rxw; while (max--) { - rxw = dw_readw(dws, DW_SPI_DR); + rxw = dw_readl(dws, DW_SPI_DR); /* Care rx only if the transfer's original "rx" is not null */ if (dws->rx_end - dws->len) { if (dws->n_bytes == 1) @@ -209,103 +217,22 @@ static void dw_reader(struct dw_spi *dws) } } -static void *next_transfer(struct dw_spi *dws) -{ - struct spi_message *msg = dws->cur_msg; - struct spi_transfer *trans = dws->cur_transfer; - - /* Move to next transfer */ - if (trans->transfer_list.next != &msg->transfers) { - dws->cur_transfer = - list_entry(trans->transfer_list.next, - struct spi_transfer, - transfer_list); - return RUNNING_STATE; - } - - return DONE_STATE; -} - -/* - * Note: first step is the protocol driver prepares - * a dma-capable memory, and this func just need translate - * the virt addr to physical - */ -static int map_dma_buffers(struct dw_spi *dws) -{ - if (!dws->cur_msg->is_dma_mapped - || !dws->dma_inited - || !dws->cur_chip->enable_dma - || !dws->dma_ops) - return 0; - - if (dws->cur_transfer->tx_dma) - dws->tx_dma = dws->cur_transfer->tx_dma; - - if (dws->cur_transfer->rx_dma) - dws->rx_dma = dws->cur_transfer->rx_dma; - - return 1; -} - -/* Caller already set message->status; dma and pio irqs are blocked */ -static void giveback(struct dw_spi *dws) -{ - struct spi_transfer *last_transfer; - struct spi_message *msg; - - msg = dws->cur_msg; - dws->cur_msg = NULL; - dws->cur_transfer = NULL; - dws->prev_chip = dws->cur_chip; - dws->cur_chip = NULL; - dws->dma_mapped = 0; - - last_transfer = list_last_entry(&msg->transfers, struct spi_transfer, - transfer_list); - - if (!last_transfer->cs_change) - spi_chip_sel(dws, msg->spi, 0); - - spi_finalize_current_message(dws->master); -} - static void int_error_stop(struct dw_spi *dws, const char *msg) { - /* Stop the hw */ - spi_enable_chip(dws, 0); + spi_reset_chip(dws); dev_err(&dws->master->dev, "%s\n", msg); - dws->cur_msg->state = ERROR_STATE; - tasklet_schedule(&dws->pump_transfers); + dws->master->cur_msg->status = -EIO; + spi_finalize_current_transfer(dws->master); } -void dw_spi_xfer_done(struct dw_spi *dws) -{ - /* Update total byte transferred return count actual bytes read */ - dws->cur_msg->actual_length += dws->len; - - /* Move to next transfer */ - dws->cur_msg->state = next_transfer(dws); - - /* Handle end of message */ - if (dws->cur_msg->state == DONE_STATE) { - dws->cur_msg->status = 0; - giveback(dws); - } else - tasklet_schedule(&dws->pump_transfers); -} -EXPORT_SYMBOL_GPL(dw_spi_xfer_done); - static irqreturn_t interrupt_transfer(struct dw_spi *dws) { - u16 irq_status = dw_readw(dws, DW_SPI_ISR); + u16 irq_status = dw_readl(dws, DW_SPI_ISR); /* Error handling */ if (irq_status & (SPI_INT_TXOI | SPI_INT_RXOI | SPI_INT_RXUI)) { - dw_readw(dws, DW_SPI_TXOICR); - dw_readw(dws, DW_SPI_RXOICR); - dw_readw(dws, DW_SPI_RXUICR); + dw_readl(dws, DW_SPI_ICR); int_error_stop(dws, "interrupt_transfer: fifo overrun/underrun"); return IRQ_HANDLED; } @@ -313,7 +240,7 @@ static irqreturn_t interrupt_transfer(struct dw_spi *dws) dw_reader(dws); if (dws->rx_end == dws->rx) { spi_mask_intr(dws, SPI_INT_TXEI); - dw_spi_xfer_done(dws); + spi_finalize_current_transfer(dws->master); return IRQ_HANDLED; } if (irq_status & SPI_INT_TXEI) { @@ -328,13 +255,14 @@ static irqreturn_t interrupt_transfer(struct dw_spi *dws) static irqreturn_t dw_spi_irq(int irq, void *dev_id) { - struct dw_spi *dws = dev_id; - u16 irq_status = dw_readw(dws, DW_SPI_ISR) & 0x3f; + struct spi_master *master = dev_id; + struct dw_spi *dws = spi_master_get_devdata(master); + u16 irq_status = dw_readl(dws, DW_SPI_ISR) & 0x3f; if (!irq_status) return IRQ_NONE; - if (!dws->cur_msg) { + if (!master->cur_msg) { spi_mask_intr(dws, SPI_INT_TXEI); return IRQ_HANDLED; } @@ -343,7 +271,7 @@ static irqreturn_t dw_spi_irq(int irq, void *dev_id) } /* Must be called inside pump_transfers() */ -static void poll_transfer(struct dw_spi *dws) +static int poll_transfer(struct dw_spi *dws) { do { dw_writer(dws); @@ -351,64 +279,32 @@ static void poll_transfer(struct dw_spi *dws) cpu_relax(); } while (dws->rx_end > dws->rx); - dw_spi_xfer_done(dws); + return 0; } -static void pump_transfers(unsigned long data) +static int dw_spi_transfer_one(struct spi_master *master, + struct spi_device *spi, struct spi_transfer *transfer) { - struct dw_spi *dws = (struct dw_spi *)data; - struct spi_message *message = NULL; - struct spi_transfer *transfer = NULL; - struct spi_transfer *previous = NULL; - struct spi_device *spi = NULL; - struct chip_data *chip = NULL; - u8 bits = 0; + struct dw_spi *dws = spi_master_get_devdata(master); + struct chip_data *chip = spi_get_ctldata(spi); u8 imask = 0; - u8 cs_change = 0; - u16 txint_level = 0; + u16 txlevel = 0; u16 clk_div = 0; u32 speed = 0; u32 cr0 = 0; + int ret; - /* Get current state information */ - message = dws->cur_msg; - transfer = dws->cur_transfer; - chip = dws->cur_chip; - spi = message->spi; - - if (message->state == ERROR_STATE) { - message->status = -EIO; - goto early_exit; - } - - /* Handle end of message */ - if (message->state == DONE_STATE) { - message->status = 0; - goto early_exit; - } - - /* Delay if requested at end of transfer */ - if (message->state == RUNNING_STATE) { - previous = list_entry(transfer->transfer_list.prev, - struct spi_transfer, - transfer_list); - if (previous->delay_usecs) - udelay(previous->delay_usecs); - } - + dws->dma_mapped = 0; dws->n_bytes = chip->n_bytes; dws->dma_width = chip->dma_width; - dws->cs_control = chip->cs_control; - dws->rx_dma = transfer->rx_dma; - dws->tx_dma = transfer->tx_dma; dws->tx = (void *)transfer->tx_buf; dws->tx_end = dws->tx + transfer->len; dws->rx = transfer->rx_buf; dws->rx_end = dws->rx + transfer->len; - dws->len = dws->cur_transfer->len; - if (chip != dws->prev_chip) - cs_change = 1; + dws->len = transfer->len; + + spi_enable_chip(dws, 0); cr0 = chip->cr0; @@ -416,32 +312,37 @@ static void pump_transfers(unsigned long data) if (transfer->speed_hz) { speed = chip->speed_hz; - if ((transfer->speed_hz != speed) || (!chip->clk_div)) { + if ((transfer->speed_hz != speed) || !chip->clk_div) { speed = transfer->speed_hz; /* clk_div doesn't support odd number */ - clk_div = dws->max_freq / speed; - clk_div = (clk_div + 1) & 0xfffe; + clk_div = (dws->max_freq / speed + 1) & 0xfffe; chip->speed_hz = speed; chip->clk_div = clk_div; + + spi_set_clk(dws, chip->clk_div); } } if (transfer->bits_per_word) { - bits = transfer->bits_per_word; - dws->n_bytes = dws->dma_width = bits >> 3; - cr0 = (bits - 1) + if (transfer->bits_per_word == 8) { + dws->n_bytes = 1; + dws->dma_width = 1; + } else if (transfer->bits_per_word == 16) { + dws->n_bytes = 2; + dws->dma_width = 2; + } + cr0 = (transfer->bits_per_word - 1) | (chip->type << SPI_FRF_OFFSET) | (spi->mode << SPI_MODE_OFFSET) | (chip->tmode << SPI_TMOD_OFFSET); } - message->state = RUNNING_STATE; /* * Adjust transfer mode if necessary. Requires platform dependent * chipselect mechanism. */ - if (dws->cs_control) { + if (chip->cs_control) { if (dws->rx && dws->tx) chip->tmode = SPI_TMOD_TR; else if (dws->rx) @@ -453,80 +354,60 @@ static void pump_transfers(unsigned long data) cr0 |= (chip->tmode << SPI_TMOD_OFFSET); } + dw_writel(dws, DW_SPI_CTRL0, cr0); + /* Check if current transfer is a DMA transaction */ - dws->dma_mapped = map_dma_buffers(dws); + if (master->can_dma && master->can_dma(master, spi, transfer)) + dws->dma_mapped = master->cur_msg_mapped; + + /* For poll mode just disable all interrupts */ + spi_mask_intr(dws, 0xff); /* * Interrupt mode * we only need set the TXEI IRQ, as TX/RX always happen syncronizely */ - if (!dws->dma_mapped && !chip->poll_mode) { - int templen = dws->len / dws->n_bytes; - - txint_level = dws->fifo_len / 2; - txint_level = (templen > txint_level) ? txint_level : templen; + if (dws->dma_mapped) { + ret = dws->dma_ops->dma_setup(dws, transfer); + if (ret < 0) { + spi_enable_chip(dws, 1); + return ret; + } + } else if (!chip->poll_mode) { + txlevel = min_t(u16, dws->fifo_len / 2, dws->len / dws->n_bytes); + dw_writel(dws, DW_SPI_TXFLTR, txlevel); + /* Set the interrupt mask */ imask |= SPI_INT_TXEI | SPI_INT_TXOI | SPI_INT_RXUI | SPI_INT_RXOI; + spi_umask_intr(dws, imask); + dws->transfer_handler = interrupt_transfer; } - /* - * Reprogram registers only if - * 1. chip select changes - * 2. clk_div is changed - * 3. control value changes - */ - if (dw_readw(dws, DW_SPI_CTRL0) != cr0 || cs_change || clk_div || imask) { - spi_enable_chip(dws, 0); - - if (dw_readw(dws, DW_SPI_CTRL0) != cr0) - dw_writew(dws, DW_SPI_CTRL0, cr0); - - spi_set_clk(dws, clk_div ? clk_div : chip->clk_div); - spi_chip_sel(dws, spi, 1); - - /* Set the interrupt mask, for poll mode just disable all int */ - spi_mask_intr(dws, 0xff); - if (imask) - spi_umask_intr(dws, imask); - if (txint_level) - dw_writew(dws, DW_SPI_TXFLTR, txint_level); + spi_enable_chip(dws, 1); - spi_enable_chip(dws, 1); - if (cs_change) - dws->prev_chip = chip; + if (dws->dma_mapped) { + ret = dws->dma_ops->dma_transfer(dws, transfer); + if (ret < 0) + return ret; } - if (dws->dma_mapped) - dws->dma_ops->dma_transfer(dws, cs_change); - if (chip->poll_mode) - poll_transfer(dws); - - return; + return poll_transfer(dws); -early_exit: - giveback(dws); + return 1; } -static int dw_spi_transfer_one_message(struct spi_master *master, +static void dw_spi_handle_err(struct spi_master *master, struct spi_message *msg) { struct dw_spi *dws = spi_master_get_devdata(master); - dws->cur_msg = msg; - /* Initial message state */ - dws->cur_msg->state = START_STATE; - dws->cur_transfer = list_entry(dws->cur_msg->transfers.next, - struct spi_transfer, - transfer_list); - dws->cur_chip = spi_get_ctldata(dws->cur_msg->spi); - - /* Launch transfers */ - tasklet_schedule(&dws->pump_transfers); + if (dws->dma_mapped) + dws->dma_ops->dma_stop(dws); - return 0; + spi_reset_chip(dws); } /* This may be called twice for each spi dev */ @@ -561,8 +442,6 @@ static int dw_spi_setup(struct spi_device *spi) chip->rx_threshold = 0; chip->tx_threshold = 0; - - chip->enable_dma = chip_info->enable_dma; } if (spi->bits_per_word == 8) { @@ -610,9 +489,7 @@ static void dw_spi_cleanup(struct spi_device *spi) /* Restart the controller, disable all interrupts, clean rx fifo */ static void spi_hw_init(struct device *dev, struct dw_spi *dws) { - spi_enable_chip(dws, 0); - spi_mask_intr(dws, 0xff); - spi_enable_chip(dws, 1); + spi_reset_chip(dws); /* * Try to detect the FIFO depth if not set by interface driver, @@ -622,11 +499,11 @@ static void spi_hw_init(struct device *dev, struct dw_spi *dws) u32 fifo; for (fifo = 1; fifo < 256; fifo++) { - dw_writew(dws, DW_SPI_TXFLTR, fifo); - if (fifo != dw_readw(dws, DW_SPI_TXFLTR)) + dw_writel(dws, DW_SPI_TXFLTR, fifo); + if (fifo != dw_readl(dws, DW_SPI_TXFLTR)) break; } - dw_writew(dws, DW_SPI_TXFLTR, 0); + dw_writel(dws, DW_SPI_TXFLTR, 0); dws->fifo_len = (fifo == 1) ? 0 : fifo; dev_dbg(dev, "Detected FIFO size: %u bytes\n", dws->fifo_len); @@ -646,13 +523,12 @@ int dw_spi_add_host(struct device *dev, struct dw_spi *dws) dws->master = master; dws->type = SSI_MOTO_SPI; - dws->prev_chip = NULL; dws->dma_inited = 0; dws->dma_addr = (dma_addr_t)(dws->paddr + 0x60); snprintf(dws->name, sizeof(dws->name), "dw_spi%d", dws->bus_num); ret = devm_request_irq(dev, dws->irq, dw_spi_irq, IRQF_SHARED, - dws->name, dws); + dws->name, master); if (ret < 0) { dev_err(&master->dev, "can not get IRQ\n"); goto err_free_master; @@ -664,7 +540,9 @@ int dw_spi_add_host(struct device *dev, struct dw_spi *dws) master->num_chipselect = dws->num_cs; master->setup = dw_spi_setup; master->cleanup = dw_spi_cleanup; - master->transfer_one_message = dw_spi_transfer_one_message; + master->set_cs = dw_spi_set_cs; + master->transfer_one = dw_spi_transfer_one; + master->handle_err = dw_spi_handle_err; master->max_speed_hz = dws->max_freq; master->dev.of_node = dev->of_node; @@ -676,11 +554,11 @@ int dw_spi_add_host(struct device *dev, struct dw_spi *dws) if (ret) { dev_warn(dev, "DMA init failed\n"); dws->dma_inited = 0; + } else { + master->can_dma = dws->dma_ops->can_dma; } } - tasklet_init(&dws->pump_transfers, pump_transfers, (unsigned long)dws); - spi_master_set_devdata(master, dws); ret = devm_spi_register_master(dev, master); if (ret) { diff --git a/drivers/spi/spi-dw.h b/drivers/spi/spi-dw.h index 3d32be68c142..6c91391c1a4f 100644 --- a/drivers/spi/spi-dw.h +++ b/drivers/spi/spi-dw.h @@ -91,12 +91,15 @@ struct dw_spi; struct dw_spi_dma_ops { int (*dma_init)(struct dw_spi *dws); void (*dma_exit)(struct dw_spi *dws); - int (*dma_transfer)(struct dw_spi *dws, int cs_change); + int (*dma_setup)(struct dw_spi *dws, struct spi_transfer *xfer); + bool (*can_dma)(struct spi_master *master, struct spi_device *spi, + struct spi_transfer *xfer); + int (*dma_transfer)(struct dw_spi *dws, struct spi_transfer *xfer); + void (*dma_stop)(struct dw_spi *dws); }; struct dw_spi { struct spi_master *master; - struct spi_device *cur_dev; enum dw_ssi_type type; char name[16]; @@ -109,41 +112,26 @@ struct dw_spi { u16 bus_num; u16 num_cs; /* supported slave numbers */ - /* Message Transfer pump */ - struct tasklet_struct pump_transfers; - /* Current message transfer state info */ - struct spi_message *cur_msg; - struct spi_transfer *cur_transfer; - struct chip_data *cur_chip; - struct chip_data *prev_chip; size_t len; void *tx; void *tx_end; void *rx; void *rx_end; int dma_mapped; - dma_addr_t rx_dma; - dma_addr_t tx_dma; - size_t rx_map_len; - size_t tx_map_len; u8 n_bytes; /* current is a 1/2 bytes op */ - u8 max_bits_per_word; /* maxim is 16b */ u32 dma_width; irqreturn_t (*transfer_handler)(struct dw_spi *dws); - void (*cs_control)(u32 command); - /* Dma info */ + /* DMA info */ int dma_inited; struct dma_chan *txchan; - struct scatterlist tx_sgl; struct dma_chan *rxchan; - struct scatterlist rx_sgl; unsigned long dma_chan_busy; - struct device *dma_dev; dma_addr_t dma_addr; /* phy address of the Data register */ struct dw_spi_dma_ops *dma_ops; - void *dma_priv; /* platform relate info */ + void *dma_tx; + void *dma_rx; /* Bus interface info */ void *priv; @@ -162,16 +150,6 @@ static inline void dw_writel(struct dw_spi *dws, u32 offset, u32 val) __raw_writel(val, dws->regs + offset); } -static inline u16 dw_readw(struct dw_spi *dws, u32 offset) -{ - return __raw_readw(dws->regs + offset); -} - -static inline void dw_writew(struct dw_spi *dws, u32 offset, u16 val) -{ - __raw_writew(val, dws->regs + offset); -} - static inline void spi_enable_chip(struct dw_spi *dws, int enable) { dw_writel(dws, DW_SPI_SSIENR, (enable ? 1 : 0)); @@ -182,22 +160,6 @@ static inline void spi_set_clk(struct dw_spi *dws, u16 div) dw_writel(dws, DW_SPI_BAUDR, div); } -static inline void spi_chip_sel(struct dw_spi *dws, struct spi_device *spi, - int active) -{ - u16 cs = spi->chip_select; - int gpio_val = active ? (spi->mode & SPI_CS_HIGH) : - !(spi->mode & SPI_CS_HIGH); - - if (dws->cs_control) - dws->cs_control(active); - if (gpio_is_valid(spi->cs_gpio)) - gpio_set_value(spi->cs_gpio, gpio_val); - - if (active) - dw_writel(dws, DW_SPI_SER, 1 << cs); -} - /* Disable IRQ bits */ static inline void spi_mask_intr(struct dw_spi *dws, u32 mask) { @@ -217,15 +179,26 @@ static inline void spi_umask_intr(struct dw_spi *dws, u32 mask) } /* + * This does disable the SPI controller, interrupts, and re-enable the + * controller back. Transmit and receive FIFO buffers are cleared when the + * device is disabled. + */ +static inline void spi_reset_chip(struct dw_spi *dws) +{ + spi_enable_chip(dws, 0); + spi_mask_intr(dws, 0xff); + spi_enable_chip(dws, 1); +} + +/* * Each SPI slave device to work with dw_api controller should - * has such a structure claiming its working mode (PIO/DMA etc), + * has such a structure claiming its working mode (poll or PIO/DMA), * which can be save in the "controller_data" member of the * struct spi_device. */ struct dw_spi_chip { u8 poll_mode; /* 1 for controller polling mode */ u8 type; /* SPI/SSP/MicroWire */ - u8 enable_dma; void (*cs_control)(u32 command); }; @@ -233,7 +206,6 @@ extern int dw_spi_add_host(struct device *dev, struct dw_spi *dws); extern void dw_spi_remove_host(struct dw_spi *dws); extern int dw_spi_suspend_host(struct dw_spi *dws); extern int dw_spi_resume_host(struct dw_spi *dws); -extern void dw_spi_xfer_done(struct dw_spi *dws); /* platform related setup */ extern int dw_spi_mid_init(struct dw_spi *dws); /* Intel MID platforms */ diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 865786012579..900a91bdb3a8 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -850,7 +850,7 @@ out: if (msg->status == -EINPROGRESS) msg->status = ret; - if (msg->status) + if (msg->status && master->handle_err) master->handle_err(master, msg); spi_finalize_current_message(master); |