summaryrefslogtreecommitdiff
path: root/drivers/spi
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/spi')
-rw-r--r--drivers/spi/spi-zynqmp-gqspi.c645
1 files changed, 369 insertions, 276 deletions
diff --git a/drivers/spi/spi-zynqmp-gqspi.c b/drivers/spi/spi-zynqmp-gqspi.c
index b479b9c3d1e6..7f57923f76ea 100644
--- a/drivers/spi/spi-zynqmp-gqspi.c
+++ b/drivers/spi/spi-zynqmp-gqspi.c
@@ -21,6 +21,7 @@
#include <linux/spi/spi.h>
#include <linux/spinlock.h>
#include <linux/workqueue.h>
+#include <linux/spi/spi-mem.h>
/* Generic QSPI register offsets */
#define GQSPI_CONFIG_OFST 0x00000100
@@ -153,6 +154,7 @@ enum mode_type {GQSPI_MODE_IO, GQSPI_MODE_DMA};
* @dma_addr: DMA address after mapping the kernel buffer
* @genfifoentry: Used for storing the genfifoentry instruction.
* @mode: Defines the mode in which QSPI is operating
+ * @data_completion: completion structure
*/
struct zynqmp_qspi {
void __iomem *regs;
@@ -170,6 +172,7 @@ struct zynqmp_qspi {
dma_addr_t dma_addr;
u32 genfifoentry;
enum mode_type mode;
+ struct completion data_completion;
};
/**
@@ -345,40 +348,6 @@ static void zynqmp_qspi_copy_read_data(struct zynqmp_qspi *xqspi,
}
/**
- * zynqmp_prepare_transfer_hardware - Prepares hardware for transfer.
- * @master: Pointer to the spi_master structure which provides
- * information about the controller.
- *
- * This function enables SPI master controller.
- *
- * Return: 0 on success; error value otherwise
- */
-static int zynqmp_prepare_transfer_hardware(struct spi_master *master)
-{
- struct zynqmp_qspi *xqspi = spi_master_get_devdata(master);
-
- zynqmp_gqspi_write(xqspi, GQSPI_EN_OFST, GQSPI_EN_MASK);
- return 0;
-}
-
-/**
- * zynqmp_unprepare_transfer_hardware - Relaxes hardware after transfer
- * @master: Pointer to the spi_master structure which provides
- * information about the controller.
- *
- * This function disables the SPI master controller.
- *
- * Return: Always 0
- */
-static int zynqmp_unprepare_transfer_hardware(struct spi_master *master)
-{
- struct zynqmp_qspi *xqspi = spi_master_get_devdata(master);
-
- zynqmp_gqspi_write(xqspi, GQSPI_EN_OFST, 0x0);
- return 0;
-}
-
-/**
* zynqmp_qspi_chipselect - Select or deselect the chip select line
* @qspi: Pointer to the spi_device structure
* @is_high: Select(0) or deselect (1) the chip select line
@@ -387,12 +356,14 @@ static void zynqmp_qspi_chipselect(struct spi_device *qspi, bool is_high)
{
struct zynqmp_qspi *xqspi = spi_master_get_devdata(qspi->master);
ulong timeout;
- u32 genfifoentry = 0x0, statusreg;
+ u32 genfifoentry = 0, statusreg;
genfifoentry |= GQSPI_GENFIFO_MODE_SPI;
- genfifoentry |= xqspi->genfifobus;
if (!is_high) {
+ xqspi->genfifobus = GQSPI_GENFIFO_BUS_LOWER;
+ xqspi->genfifocs = GQSPI_GENFIFO_CS_LOWER;
+ genfifoentry |= xqspi->genfifobus;
genfifoentry |= xqspi->genfifocs;
genfifoentry |= GQSPI_GENFIFO_CS_SETUP;
} else {
@@ -424,11 +395,38 @@ static void zynqmp_qspi_chipselect(struct spi_device *qspi, bool is_high)
}
/**
- * zynqmp_qspi_setup_transfer - Configure QSPI controller for specified
+ * zynqmp_qspi_selectspimode - Selects SPI mode - x1 or x2 or x4.
+ * @xqspi: xqspi is a pointer to the GQSPI instance
+ * @spimode: spimode - SPI or DUAL or QUAD.
+ * Return: Mask to set desired SPI mode in GENFIFO entry.
+ */
+static inline u32 zynqmp_qspi_selectspimode(struct zynqmp_qspi *xqspi,
+ u8 spimode)
+{
+ u32 mask = 0;
+
+ switch (spimode) {
+ case GQSPI_SELECT_MODE_DUALSPI:
+ mask = GQSPI_GENFIFO_MODE_DUALSPI;
+ break;
+ case GQSPI_SELECT_MODE_QUADSPI:
+ mask = GQSPI_GENFIFO_MODE_QUADSPI;
+ break;
+ case GQSPI_SELECT_MODE_SPI:
+ mask = GQSPI_GENFIFO_MODE_SPI;
+ break;
+ default:
+ dev_warn(xqspi->dev, "Invalid SPI mode\n");
+ }
+
+ return mask;
+}
+
+/**
+ * zynqmp_qspi_config_op - Configure QSPI controller for specified
* transfer
+ * @xqspi: Pointer to the zynqmp_qspi structure
* @qspi: Pointer to the spi_device structure
- * @transfer: Pointer to the spi_transfer structure which provides
- * information about next transfer setup parameters
*
* Sets the operational mode of QSPI controller for the next QSPI transfer and
* sets the requested clock frequency.
@@ -445,17 +443,11 @@ static void zynqmp_qspi_chipselect(struct spi_device *qspi, bool is_high)
* by the QSPI controller the driver will set the highest or lowest
* frequency supported by controller.
*/
-static int zynqmp_qspi_setup_transfer(struct spi_device *qspi,
- struct spi_transfer *transfer)
+static int zynqmp_qspi_config_op(struct zynqmp_qspi *xqspi,
+ struct spi_device *qspi)
{
- struct zynqmp_qspi *xqspi = spi_master_get_devdata(qspi->master);
ulong clk_rate;
- u32 config_reg, req_hz, baud_rate_val = 0;
-
- if (transfer)
- req_hz = transfer->speed_hz;
- else
- req_hz = qspi->max_speed_hz;
+ u32 config_reg, baud_rate_val = 0;
/* Set the clock frequency */
/* If req_hz == 0, default to lowest speed */
@@ -463,7 +455,7 @@ static int zynqmp_qspi_setup_transfer(struct spi_device *qspi,
while ((baud_rate_val < GQSPI_BAUD_DIV_MAX) &&
(clk_rate /
- (GQSPI_BAUD_DIV_SHIFT << baud_rate_val)) > req_hz)
+ (GQSPI_BAUD_DIV_SHIFT << baud_rate_val)) > qspi->max_speed_hz)
baud_rate_val++;
config_reg = zynqmp_gqspi_read(xqspi, GQSPI_CONFIG_OFST);
@@ -483,7 +475,7 @@ static int zynqmp_qspi_setup_transfer(struct spi_device *qspi,
}
/**
- * zynqmp_qspi_setup - Configure the QSPI controller
+ * zynqmp_qspi_setup_op - Configure the QSPI controller
* @qspi: Pointer to the spi_device structure
*
* Sets the operational mode of QSPI controller for the next QSPI transfer,
@@ -491,10 +483,30 @@ static int zynqmp_qspi_setup_transfer(struct spi_device *qspi,
*
* Return: 0 on success; error value otherwise.
*/
-static int zynqmp_qspi_setup(struct spi_device *qspi)
+static int zynqmp_qspi_setup_op(struct spi_device *qspi)
{
- if (qspi->master->busy)
+ struct spi_controller *ctlr = qspi->master;
+ struct zynqmp_qspi *xqspi = spi_controller_get_devdata(ctlr);
+ struct device *dev = &ctlr->dev;
+ int ret;
+
+ if (ctlr->busy)
return -EBUSY;
+
+ ret = clk_enable(xqspi->refclk);
+ if (ret) {
+ dev_err(dev, "Cannot enable device clock.\n");
+ return ret;
+ }
+
+ ret = clk_enable(xqspi->pclk);
+ if (ret) {
+ dev_err(dev, "Cannot enable APB clock.\n");
+ clk_disable(xqspi->refclk);
+ return ret;
+ }
+ zynqmp_gqspi_write(xqspi, GQSPI_EN_OFST, GQSPI_EN_MASK);
+
return 0;
}
@@ -553,6 +565,75 @@ static void zynqmp_qspi_readrxfifo(struct zynqmp_qspi *xqspi, u32 size)
}
/**
+ * zynqmp_qspi_fillgenfifo - Fills the GENFIFO.
+ * @xqspi: Pointer to the zynqmp_qspi structure
+ * @nbits: Transfer/Receive buswidth.
+ * @genfifoentry: Variable in which GENFIFO mask is saved
+ */
+static void zynqmp_qspi_fillgenfifo(struct zynqmp_qspi *xqspi, u8 nbits,
+ u32 genfifoentry)
+{
+ u32 transfer_len = 0;
+
+ if (xqspi->txbuf) {
+ genfifoentry &= ~GQSPI_GENFIFO_RX;
+ genfifoentry |= GQSPI_GENFIFO_DATA_XFER;
+ genfifoentry |= GQSPI_GENFIFO_TX;
+ transfer_len = xqspi->bytes_to_transfer;
+ } else {
+ genfifoentry &= ~GQSPI_GENFIFO_TX;
+ genfifoentry |= GQSPI_GENFIFO_DATA_XFER;
+ genfifoentry |= GQSPI_GENFIFO_RX;
+ if (xqspi->mode == GQSPI_MODE_DMA)
+ transfer_len = xqspi->dma_rx_bytes;
+ else
+ transfer_len = xqspi->bytes_to_receive;
+ }
+ genfifoentry |= zynqmp_qspi_selectspimode(xqspi, nbits);
+ xqspi->genfifoentry = genfifoentry;
+
+ if ((transfer_len) < GQSPI_GENFIFO_IMM_DATA_MASK) {
+ genfifoentry &= ~GQSPI_GENFIFO_IMM_DATA_MASK;
+ genfifoentry |= transfer_len;
+ zynqmp_gqspi_write(xqspi, GQSPI_GEN_FIFO_OFST, genfifoentry);
+ } else {
+ int tempcount = transfer_len;
+ u32 exponent = 8; /* 2^8 = 256 */
+ u8 imm_data = tempcount & 0xFF;
+
+ tempcount &= ~(tempcount & 0xFF);
+ /* Immediate entry */
+ if (tempcount != 0) {
+ /* Exponent entries */
+ genfifoentry |= GQSPI_GENFIFO_EXP;
+ while (tempcount != 0) {
+ if (tempcount & GQSPI_GENFIFO_EXP_START) {
+ genfifoentry &=
+ ~GQSPI_GENFIFO_IMM_DATA_MASK;
+ genfifoentry |= exponent;
+ zynqmp_gqspi_write(xqspi,
+ GQSPI_GEN_FIFO_OFST,
+ genfifoentry);
+ }
+ tempcount = tempcount >> 1;
+ exponent++;
+ }
+ }
+ if (imm_data != 0) {
+ genfifoentry &= ~GQSPI_GENFIFO_EXP;
+ genfifoentry &= ~GQSPI_GENFIFO_IMM_DATA_MASK;
+ genfifoentry |= (u8)(imm_data & 0xFF);
+ zynqmp_gqspi_write(xqspi, GQSPI_GEN_FIFO_OFST,
+ genfifoentry);
+ }
+ }
+ if (xqspi->mode == GQSPI_MODE_IO && xqspi->rxbuf) {
+ /* Dummy generic FIFO entry */
+ zynqmp_gqspi_write(xqspi, GQSPI_GEN_FIFO_OFST, 0x0);
+ }
+}
+
+/**
* zynqmp_process_dma_irq - Handler for DMA done interrupt of QSPI
* controller
* @xqspi: zynqmp_qspi instance pointer
@@ -614,9 +695,8 @@ static void zynqmp_process_dma_irq(struct zynqmp_qspi *xqspi)
*/
static irqreturn_t zynqmp_qspi_irq(int irq, void *dev_id)
{
- struct spi_master *master = dev_id;
- struct zynqmp_qspi *xqspi = spi_master_get_devdata(master);
- int ret = IRQ_NONE;
+ struct zynqmp_qspi *xqspi = (struct zynqmp_qspi *)dev_id;
+ irqreturn_t ret = IRQ_NONE;
u32 status, mask, dma_status = 0;
status = zynqmp_gqspi_read(xqspi, GQSPI_ISR_OFST);
@@ -648,45 +728,17 @@ static irqreturn_t zynqmp_qspi_irq(int irq, void *dev_id)
if ((xqspi->bytes_to_receive == 0) && (xqspi->bytes_to_transfer == 0)
&& ((status & GQSPI_IRQ_MASK) == GQSPI_IRQ_MASK)) {
zynqmp_gqspi_write(xqspi, GQSPI_IDR_OFST, GQSPI_ISR_IDR_MASK);
- spi_finalize_current_transfer(master);
+ complete(&xqspi->data_completion);
ret = IRQ_HANDLED;
}
return ret;
}
/**
- * zynqmp_qspi_selectspimode - Selects SPI mode - x1 or x2 or x4.
- * @xqspi: xqspi is a pointer to the GQSPI instance
- * @spimode: spimode - SPI or DUAL or QUAD.
- * Return: Mask to set desired SPI mode in GENFIFO entry.
- */
-static inline u32 zynqmp_qspi_selectspimode(struct zynqmp_qspi *xqspi,
- u8 spimode)
-{
- u32 mask = 0;
-
- switch (spimode) {
- case GQSPI_SELECT_MODE_DUALSPI:
- mask = GQSPI_GENFIFO_MODE_DUALSPI;
- break;
- case GQSPI_SELECT_MODE_QUADSPI:
- mask = GQSPI_GENFIFO_MODE_QUADSPI;
- break;
- case GQSPI_SELECT_MODE_SPI:
- mask = GQSPI_GENFIFO_MODE_SPI;
- break;
- default:
- dev_warn(xqspi->dev, "Invalid SPI mode\n");
- }
-
- return mask;
-}
-
-/**
- * zynq_qspi_setuprxdma - This function sets up the RX DMA operation
+ * zynqmp_qspi_setuprxdma - This function sets up the RX DMA operation
* @xqspi: xqspi is a pointer to the GQSPI instance.
*/
-static void zynq_qspi_setuprxdma(struct zynqmp_qspi *xqspi)
+static void zynqmp_qspi_setuprxdma(struct zynqmp_qspi *xqspi)
{
u32 rx_bytes, rx_rem, config_reg;
dma_addr_t addr;
@@ -733,162 +785,44 @@ static void zynq_qspi_setuprxdma(struct zynqmp_qspi *xqspi)
}
/**
- * zynqmp_qspi_txrxsetup - This function checks the TX/RX buffers in
- * the transfer and sets up the GENFIFO entries,
- * TX FIFO as required.
- * @xqspi: xqspi is a pointer to the GQSPI instance.
- * @transfer: It is a pointer to the structure containing transfer data.
- * @genfifoentry: genfifoentry is pointer to the variable in which
- * GENFIFO mask is returned to calling function
+ * zynqmp_qspi_write_op - This function sets up the GENFIFO entries,
+ * TX FIFO, and fills the TX FIFO with as many
+ * bytes as possible.
+ * @xqspi: Pointer to the GQSPI instance.
+ * @tx_nbits: Transfer buswidth.
+ * @genfifoentry: Variable in which GENFIFO mask is returned
+ * to calling function
*/
-static void zynqmp_qspi_txrxsetup(struct zynqmp_qspi *xqspi,
- struct spi_transfer *transfer,
- u32 *genfifoentry)
+static void zynqmp_qspi_write_op(struct zynqmp_qspi *xqspi, u8 tx_nbits,
+ u32 genfifoentry)
{
u32 config_reg;
- /* Transmit */
- if ((xqspi->txbuf != NULL) && (xqspi->rxbuf == NULL)) {
- /* Setup data to be TXed */
- *genfifoentry &= ~GQSPI_GENFIFO_RX;
- *genfifoentry |= GQSPI_GENFIFO_DATA_XFER;
- *genfifoentry |= GQSPI_GENFIFO_TX;
- *genfifoentry |=
- zynqmp_qspi_selectspimode(xqspi, transfer->tx_nbits);
- xqspi->bytes_to_transfer = transfer->len;
- if (xqspi->mode == GQSPI_MODE_DMA) {
- config_reg = zynqmp_gqspi_read(xqspi,
- GQSPI_CONFIG_OFST);
- config_reg &= ~GQSPI_CFG_MODE_EN_MASK;
- zynqmp_gqspi_write(xqspi, GQSPI_CONFIG_OFST,
- config_reg);
- xqspi->mode = GQSPI_MODE_IO;
- }
- zynqmp_qspi_filltxfifo(xqspi, GQSPI_TXD_DEPTH);
- /* Discard RX data */
- xqspi->bytes_to_receive = 0;
- } else if ((xqspi->txbuf == NULL) && (xqspi->rxbuf != NULL)) {
- /* Receive */
-
- /* TX auto fill */
- *genfifoentry &= ~GQSPI_GENFIFO_TX;
- /* Setup RX */
- *genfifoentry |= GQSPI_GENFIFO_DATA_XFER;
- *genfifoentry |= GQSPI_GENFIFO_RX;
- *genfifoentry |=
- zynqmp_qspi_selectspimode(xqspi, transfer->rx_nbits);
- xqspi->bytes_to_transfer = 0;
- xqspi->bytes_to_receive = transfer->len;
- zynq_qspi_setuprxdma(xqspi);
+ zynqmp_qspi_fillgenfifo(xqspi, tx_nbits, genfifoentry);
+ zynqmp_qspi_filltxfifo(xqspi, GQSPI_TXD_DEPTH);
+ if (xqspi->mode == GQSPI_MODE_DMA) {
+ config_reg = zynqmp_gqspi_read(xqspi,
+ GQSPI_CONFIG_OFST);
+ config_reg &= ~GQSPI_CFG_MODE_EN_MASK;
+ zynqmp_gqspi_write(xqspi, GQSPI_CONFIG_OFST,
+ config_reg);
+ xqspi->mode = GQSPI_MODE_IO;
}
}
/**
- * zynqmp_qspi_start_transfer - Initiates the QSPI transfer
- * @master: Pointer to the spi_master structure which provides
- * information about the controller.
- * @qspi: Pointer to the spi_device structure
- * @transfer: Pointer to the spi_transfer structure which provide information
- * about next transfer parameters
- *
- * This function fills the TX FIFO, starts the QSPI transfer, and waits for the
- * transfer to be completed.
- *
- * Return: Number of bytes transferred in the last transfer
+ * zynqmp_qspi_read_op - This function sets up the GENFIFO entries and
+ * RX DMA operation.
+ * @xqspi: xqspi is a pointer to the GQSPI instance.
+ * @rx_nbits: Receive buswidth.
+ * @genfifoentry: genfifoentry is pointer to the variable in which
+ * GENFIFO mask is returned to calling function
*/
-static int zynqmp_qspi_start_transfer(struct spi_master *master,
- struct spi_device *qspi,
- struct spi_transfer *transfer)
+static void zynqmp_qspi_read_op(struct zynqmp_qspi *xqspi, u8 rx_nbits,
+ u32 genfifoentry)
{
- struct zynqmp_qspi *xqspi = spi_master_get_devdata(master);
- u32 genfifoentry = 0x0, transfer_len;
-
- xqspi->txbuf = transfer->tx_buf;
- xqspi->rxbuf = transfer->rx_buf;
-
- zynqmp_qspi_setup_transfer(qspi, transfer);
-
- genfifoentry |= xqspi->genfifocs;
- genfifoentry |= xqspi->genfifobus;
-
- zynqmp_qspi_txrxsetup(xqspi, transfer, &genfifoentry);
-
- if (xqspi->mode == GQSPI_MODE_DMA)
- transfer_len = xqspi->dma_rx_bytes;
- else
- transfer_len = transfer->len;
-
- xqspi->genfifoentry = genfifoentry;
- if ((transfer_len) < GQSPI_GENFIFO_IMM_DATA_MASK) {
- genfifoentry &= ~GQSPI_GENFIFO_IMM_DATA_MASK;
- genfifoentry |= transfer_len;
- zynqmp_gqspi_write(xqspi, GQSPI_GEN_FIFO_OFST, genfifoentry);
- } else {
- int tempcount = transfer_len;
- u32 exponent = 8; /* 2^8 = 256 */
- u8 imm_data = tempcount & 0xFF;
-
- tempcount &= ~(tempcount & 0xFF);
- /* Immediate entry */
- if (tempcount != 0) {
- /* Exponent entries */
- genfifoentry |= GQSPI_GENFIFO_EXP;
- while (tempcount != 0) {
- if (tempcount & GQSPI_GENFIFO_EXP_START) {
- genfifoentry &=
- ~GQSPI_GENFIFO_IMM_DATA_MASK;
- genfifoentry |= exponent;
- zynqmp_gqspi_write(xqspi,
- GQSPI_GEN_FIFO_OFST,
- genfifoentry);
- }
- tempcount = tempcount >> 1;
- exponent++;
- }
- }
- if (imm_data != 0) {
- genfifoentry &= ~GQSPI_GENFIFO_EXP;
- genfifoentry &= ~GQSPI_GENFIFO_IMM_DATA_MASK;
- genfifoentry |= (u8) (imm_data & 0xFF);
- zynqmp_gqspi_write(xqspi,
- GQSPI_GEN_FIFO_OFST, genfifoentry);
- }
- }
-
- if ((xqspi->mode == GQSPI_MODE_IO) &&
- (xqspi->rxbuf != NULL)) {
- /* Dummy generic FIFO entry */
- zynqmp_gqspi_write(xqspi, GQSPI_GEN_FIFO_OFST, 0x0);
- }
-
- /* Since we are using manual mode */
- zynqmp_gqspi_write(xqspi, GQSPI_CONFIG_OFST,
- zynqmp_gqspi_read(xqspi, GQSPI_CONFIG_OFST) |
- GQSPI_CFG_START_GEN_FIFO_MASK);
-
- if (xqspi->txbuf != NULL)
- /* Enable interrupts for TX */
- zynqmp_gqspi_write(xqspi, GQSPI_IER_OFST,
- GQSPI_IER_TXEMPTY_MASK |
- GQSPI_IER_GENFIFOEMPTY_MASK |
- GQSPI_IER_TXNOT_FULL_MASK);
-
- if (xqspi->rxbuf != NULL) {
- /* Enable interrupts for RX */
- if (xqspi->mode == GQSPI_MODE_DMA) {
- /* Enable DMA interrupts */
- zynqmp_gqspi_write(xqspi,
- GQSPI_QSPIDMA_DST_I_EN_OFST,
- GQSPI_QSPIDMA_DST_I_EN_DONE_MASK);
- } else {
- zynqmp_gqspi_write(xqspi, GQSPI_IER_OFST,
- GQSPI_IER_GENFIFOEMPTY_MASK |
- GQSPI_IER_RXNEMPTY_MASK |
- GQSPI_IER_RXEMPTY_MASK);
- }
- }
-
- return transfer->len;
+ zynqmp_qspi_fillgenfifo(xqspi, rx_nbits, genfifoentry);
+ zynqmp_qspi_setuprxdma(xqspi);
}
/**
@@ -901,11 +835,12 @@ static int zynqmp_qspi_start_transfer(struct spi_master *master,
*/
static int __maybe_unused zynqmp_qspi_suspend(struct device *dev)
{
- struct spi_master *master = dev_get_drvdata(dev);
+ struct spi_controller *ctlr = dev_get_drvdata(dev);
+ struct zynqmp_qspi *xqspi = spi_controller_get_devdata(ctlr);
- spi_master_suspend(master);
+ spi_controller_suspend(ctlr);
- zynqmp_unprepare_transfer_hardware(master);
+ zynqmp_gqspi_write(xqspi, GQSPI_EN_OFST, 0x0);
return 0;
}
@@ -921,8 +856,8 @@ static int __maybe_unused zynqmp_qspi_suspend(struct device *dev)
*/
static int __maybe_unused zynqmp_qspi_resume(struct device *dev)
{
- struct spi_master *master = dev_get_drvdata(dev);
- struct zynqmp_qspi *xqspi = spi_master_get_devdata(master);
+ struct spi_controller *ctlr = dev_get_drvdata(dev);
+ struct zynqmp_qspi *xqspi = spi_controller_get_devdata(ctlr);
int ret = 0;
ret = clk_enable(xqspi->pclk);
@@ -938,7 +873,7 @@ static int __maybe_unused zynqmp_qspi_resume(struct device *dev)
return ret;
}
- spi_master_resume(master);
+ spi_controller_resume(ctlr);
clk_disable(xqspi->refclk);
clk_disable(xqspi->pclk);
@@ -955,8 +890,7 @@ static int __maybe_unused zynqmp_qspi_resume(struct device *dev)
*/
static int __maybe_unused zynqmp_runtime_suspend(struct device *dev)
{
- struct spi_master *master = dev_get_drvdata(dev);
- struct zynqmp_qspi *xqspi = spi_master_get_devdata(master);
+ struct zynqmp_qspi *xqspi = (struct zynqmp_qspi *)dev_get_drvdata(dev);
clk_disable(xqspi->refclk);
clk_disable(xqspi->pclk);
@@ -974,8 +908,7 @@ static int __maybe_unused zynqmp_runtime_suspend(struct device *dev)
*/
static int __maybe_unused zynqmp_runtime_resume(struct device *dev)
{
- struct spi_master *master = dev_get_drvdata(dev);
- struct zynqmp_qspi *xqspi = spi_master_get_devdata(master);
+ struct zynqmp_qspi *xqspi = (struct zynqmp_qspi *)dev_get_drvdata(dev);
int ret;
ret = clk_enable(xqspi->pclk);
@@ -994,12 +927,177 @@ static int __maybe_unused zynqmp_runtime_resume(struct device *dev)
return 0;
}
+/**
+ * zynqmp_qspi_exec_op() - Initiates the QSPI transfer
+ * @mem: The SPI memory
+ * @op: The memory operation to execute
+ *
+ * Executes a memory operation.
+ *
+ * This function first selects the chip and starts the memory operation.
+ *
+ * Return: 0 in case of success, a negative error code otherwise.
+ */
+static int zynqmp_qspi_exec_op(struct spi_mem *mem,
+ const struct spi_mem_op *op)
+{
+ struct zynqmp_qspi *xqspi = spi_controller_get_devdata
+ (mem->spi->master);
+ int err = 0, i;
+ u8 *tmpbuf;
+ u32 genfifoentry = 0;
+
+ dev_dbg(xqspi->dev, "cmd:%#x mode:%d.%d.%d.%d\n",
+ op->cmd.opcode, op->cmd.buswidth, op->addr.buswidth,
+ op->dummy.buswidth, op->data.buswidth);
+
+ zynqmp_qspi_config_op(xqspi, mem->spi);
+ zynqmp_qspi_chipselect(mem->spi, false);
+ genfifoentry |= xqspi->genfifocs;
+ genfifoentry |= xqspi->genfifobus;
+
+ if (op->cmd.opcode) {
+ tmpbuf = kzalloc(op->cmd.nbytes, GFP_KERNEL | GFP_DMA);
+ if (!tmpbuf)
+ return -ENOMEM;
+ tmpbuf[0] = op->cmd.opcode;
+ reinit_completion(&xqspi->data_completion);
+ xqspi->txbuf = tmpbuf;
+ xqspi->rxbuf = NULL;
+ xqspi->bytes_to_transfer = op->cmd.nbytes;
+ xqspi->bytes_to_receive = 0;
+ zynqmp_qspi_write_op(xqspi, op->cmd.buswidth, genfifoentry);
+ zynqmp_gqspi_write(xqspi, GQSPI_CONFIG_OFST,
+ zynqmp_gqspi_read(xqspi, GQSPI_CONFIG_OFST) |
+ GQSPI_CFG_START_GEN_FIFO_MASK);
+ zynqmp_gqspi_write(xqspi, GQSPI_IER_OFST,
+ GQSPI_IER_GENFIFOEMPTY_MASK |
+ GQSPI_IER_TXNOT_FULL_MASK);
+ if (!wait_for_completion_interruptible_timeout
+ (&xqspi->data_completion, msecs_to_jiffies(1000))) {
+ err = -ETIMEDOUT;
+ kfree(tmpbuf);
+ goto return_err;
+ }
+ kfree(tmpbuf);
+ }
+
+ if (op->addr.nbytes) {
+ for (i = 0; i < op->addr.nbytes; i++) {
+ *(((u8 *)xqspi->txbuf) + i) = op->addr.val >>
+ (8 * (op->addr.nbytes - i - 1));
+ }
+
+ reinit_completion(&xqspi->data_completion);
+ xqspi->rxbuf = NULL;
+ xqspi->bytes_to_transfer = op->addr.nbytes;
+ xqspi->bytes_to_receive = 0;
+ zynqmp_qspi_write_op(xqspi, op->addr.buswidth, genfifoentry);
+ zynqmp_gqspi_write(xqspi, GQSPI_CONFIG_OFST,
+ zynqmp_gqspi_read(xqspi,
+ GQSPI_CONFIG_OFST) |
+ GQSPI_CFG_START_GEN_FIFO_MASK);
+ zynqmp_gqspi_write(xqspi, GQSPI_IER_OFST,
+ GQSPI_IER_TXEMPTY_MASK |
+ GQSPI_IER_GENFIFOEMPTY_MASK |
+ GQSPI_IER_TXNOT_FULL_MASK);
+ if (!wait_for_completion_interruptible_timeout
+ (&xqspi->data_completion, msecs_to_jiffies(1000))) {
+ err = -ETIMEDOUT;
+ goto return_err;
+ }
+ }
+
+ if (op->dummy.nbytes) {
+ tmpbuf = kzalloc(op->dummy.nbytes, GFP_KERNEL | GFP_DMA);
+ if (!tmpbuf)
+ return -ENOMEM;
+ memset(tmpbuf, 0xff, op->dummy.nbytes);
+ reinit_completion(&xqspi->data_completion);
+ xqspi->txbuf = tmpbuf;
+ xqspi->rxbuf = NULL;
+ xqspi->bytes_to_transfer = op->dummy.nbytes;
+ xqspi->bytes_to_receive = 0;
+ zynqmp_qspi_write_op(xqspi, op->dummy.buswidth,
+ genfifoentry);
+ zynqmp_gqspi_write(xqspi, GQSPI_CONFIG_OFST,
+ zynqmp_gqspi_read(xqspi, GQSPI_CONFIG_OFST) |
+ GQSPI_CFG_START_GEN_FIFO_MASK);
+ zynqmp_gqspi_write(xqspi, GQSPI_IER_OFST,
+ GQSPI_IER_TXEMPTY_MASK |
+ GQSPI_IER_GENFIFOEMPTY_MASK |
+ GQSPI_IER_TXNOT_FULL_MASK);
+ if (!wait_for_completion_interruptible_timeout
+ (&xqspi->data_completion, msecs_to_jiffies(1000))) {
+ err = -ETIMEDOUT;
+ kfree(tmpbuf);
+ goto return_err;
+ }
+
+ kfree(tmpbuf);
+ }
+
+ if (op->data.nbytes) {
+ reinit_completion(&xqspi->data_completion);
+ if (op->data.dir == SPI_MEM_DATA_OUT) {
+ xqspi->txbuf = (u8 *)op->data.buf.out;
+ xqspi->rxbuf = NULL;
+ xqspi->bytes_to_transfer = op->data.nbytes;
+ xqspi->bytes_to_receive = 0;
+ zynqmp_qspi_write_op(xqspi, op->data.buswidth,
+ genfifoentry);
+ zynqmp_gqspi_write(xqspi, GQSPI_CONFIG_OFST,
+ zynqmp_gqspi_read
+ (xqspi, GQSPI_CONFIG_OFST) |
+ GQSPI_CFG_START_GEN_FIFO_MASK);
+ zynqmp_gqspi_write(xqspi, GQSPI_IER_OFST,
+ GQSPI_IER_TXEMPTY_MASK |
+ GQSPI_IER_GENFIFOEMPTY_MASK |
+ GQSPI_IER_TXNOT_FULL_MASK);
+ } else {
+ xqspi->txbuf = NULL;
+ xqspi->rxbuf = (u8 *)op->data.buf.in;
+ xqspi->bytes_to_receive = op->data.nbytes;
+ xqspi->bytes_to_transfer = 0;
+ zynqmp_qspi_read_op(xqspi, op->data.buswidth,
+ genfifoentry);
+ zynqmp_gqspi_write(xqspi, GQSPI_CONFIG_OFST,
+ zynqmp_gqspi_read
+ (xqspi, GQSPI_CONFIG_OFST) |
+ GQSPI_CFG_START_GEN_FIFO_MASK);
+ if (xqspi->mode == GQSPI_MODE_DMA) {
+ zynqmp_gqspi_write
+ (xqspi, GQSPI_QSPIDMA_DST_I_EN_OFST,
+ GQSPI_QSPIDMA_DST_I_EN_DONE_MASK);
+ } else {
+ zynqmp_gqspi_write(xqspi, GQSPI_IER_OFST,
+ GQSPI_IER_GENFIFOEMPTY_MASK |
+ GQSPI_IER_RXNEMPTY_MASK |
+ GQSPI_IER_RXEMPTY_MASK);
+ }
+ }
+ if (!wait_for_completion_interruptible_timeout
+ (&xqspi->data_completion, msecs_to_jiffies(1000)))
+ err = -ETIMEDOUT;
+ }
+
+return_err:
+
+ zynqmp_qspi_chipselect(mem->spi, true);
+
+ return err;
+}
+
static const struct dev_pm_ops zynqmp_qspi_dev_pm_ops = {
SET_RUNTIME_PM_OPS(zynqmp_runtime_suspend,
zynqmp_runtime_resume, NULL)
SET_SYSTEM_SLEEP_PM_OPS(zynqmp_qspi_suspend, zynqmp_qspi_resume)
};
+static const struct spi_controller_mem_ops zynqmp_qspi_mem_ops = {
+ .exec_op = zynqmp_qspi_exec_op,
+};
+
/**
* zynqmp_qspi_probe - Probe method for the QSPI driver
* @pdev: Pointer to the platform_device structure
@@ -1011,17 +1109,18 @@ static const struct dev_pm_ops zynqmp_qspi_dev_pm_ops = {
static int zynqmp_qspi_probe(struct platform_device *pdev)
{
int ret = 0;
- struct spi_master *master;
+ struct spi_controller *ctlr;
struct zynqmp_qspi *xqspi;
struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
- master = spi_alloc_master(&pdev->dev, sizeof(*xqspi));
- if (!master)
+ ctlr = spi_alloc_master(&pdev->dev, sizeof(*xqspi));
+ if (!ctlr)
return -ENOMEM;
- xqspi = spi_master_get_devdata(master);
- master->dev.of_node = pdev->dev.of_node;
- platform_set_drvdata(pdev, master);
+ xqspi = spi_controller_get_devdata(ctlr);
+ xqspi->dev = dev;
+ platform_set_drvdata(pdev, xqspi);
xqspi->regs = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(xqspi->regs)) {
@@ -1029,7 +1128,6 @@ static int zynqmp_qspi_probe(struct platform_device *pdev)
goto remove_master;
}
- xqspi->dev = dev;
xqspi->pclk = devm_clk_get(&pdev->dev, "pclk");
if (IS_ERR(xqspi->pclk)) {
dev_err(dev, "pclk clock not found.\n");
@@ -1037,11 +1135,7 @@ static int zynqmp_qspi_probe(struct platform_device *pdev)
goto remove_master;
}
- ret = clk_prepare_enable(xqspi->pclk);
- if (ret) {
- dev_err(dev, "Unable to enable APB clock.\n");
- goto remove_master;
- }
+ init_completion(&xqspi->data_completion);
xqspi->refclk = devm_clk_get(&pdev->dev, "ref_clk");
if (IS_ERR(xqspi->refclk)) {
@@ -1050,6 +1144,12 @@ static int zynqmp_qspi_probe(struct platform_device *pdev)
goto clk_dis_pclk;
}
+ ret = clk_prepare_enable(xqspi->pclk);
+ if (ret) {
+ dev_err(dev, "Unable to enable APB clock.\n");
+ goto remove_master;
+ }
+
ret = clk_prepare_enable(xqspi->refclk);
if (ret) {
dev_err(dev, "Unable to enable device clock.\n");
@@ -1071,32 +1171,28 @@ static int zynqmp_qspi_probe(struct platform_device *pdev)
goto clk_dis_all;
}
ret = devm_request_irq(&pdev->dev, xqspi->irq, zynqmp_qspi_irq,
- 0, pdev->name, master);
+ 0, pdev->name, xqspi);
if (ret != 0) {
ret = -ENXIO;
dev_err(dev, "request_irq failed\n");
goto clk_dis_all;
}
- master->num_chipselect = GQSPI_DEFAULT_NUM_CS;
-
- master->setup = zynqmp_qspi_setup;
- master->set_cs = zynqmp_qspi_chipselect;
- master->transfer_one = zynqmp_qspi_start_transfer;
- master->prepare_transfer_hardware = zynqmp_prepare_transfer_hardware;
- master->unprepare_transfer_hardware =
- zynqmp_unprepare_transfer_hardware;
- master->max_speed_hz = clk_get_rate(xqspi->refclk) / 2;
- master->bits_per_word_mask = SPI_BPW_MASK(8);
- master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_RX_DUAL | SPI_RX_QUAD |
+ ctlr->bits_per_word_mask = SPI_BPW_MASK(8);
+ ctlr->num_chipselect = GQSPI_DEFAULT_NUM_CS;
+ ctlr->mem_ops = &zynqmp_qspi_mem_ops;
+ ctlr->setup = zynqmp_qspi_setup_op;
+ ctlr->max_speed_hz = clk_get_rate(xqspi->refclk) / 2;
+ ctlr->bits_per_word_mask = SPI_BPW_MASK(8);
+ ctlr->mode_bits = SPI_CPOL | SPI_CPHA | SPI_RX_DUAL | SPI_RX_QUAD |
SPI_TX_DUAL | SPI_TX_QUAD;
+ ctlr->dev.of_node = np;
- if (master->dev.parent == NULL)
- master->dev.parent = &master->dev;
-
- ret = spi_register_master(master);
- if (ret)
+ ret = devm_spi_register_controller(&pdev->dev, ctlr);
+ if (ret) {
+ dev_err(&pdev->dev, "spi_register_controller failed\n");
goto clk_dis_all;
+ }
return 0;
@@ -1107,7 +1203,7 @@ clk_dis_all:
clk_dis_pclk:
clk_disable_unprepare(xqspi->pclk);
remove_master:
- spi_master_put(master);
+ spi_controller_put(ctlr);
return ret;
}
@@ -1124,8 +1220,7 @@ remove_master:
*/
static int zynqmp_qspi_remove(struct platform_device *pdev)
{
- struct spi_master *master = platform_get_drvdata(pdev);
- struct zynqmp_qspi *xqspi = spi_master_get_devdata(master);
+ struct zynqmp_qspi *xqspi = platform_get_drvdata(pdev);
zynqmp_gqspi_write(xqspi, GQSPI_EN_OFST, 0x0);
clk_disable_unprepare(xqspi->refclk);
@@ -1133,8 +1228,6 @@ static int zynqmp_qspi_remove(struct platform_device *pdev)
pm_runtime_set_suspended(&pdev->dev);
pm_runtime_disable(&pdev->dev);
- spi_unregister_master(master);
-
return 0;
}