diff options
Diffstat (limited to 'drivers/spi/spi-rspi.c')
-rw-r--r-- | drivers/spi/spi-rspi.c | 842 |
1 files changed, 560 insertions, 282 deletions
diff --git a/drivers/spi/spi-rspi.c b/drivers/spi/spi-rspi.c index 28987d9fcfe5..1fb0ad213324 100644 --- a/drivers/spi/spi-rspi.c +++ b/drivers/spi/spi-rspi.c @@ -1,7 +1,8 @@ /* * SH RSPI driver * - * Copyright (C) 2012 Renesas Solutions Corp. + * Copyright (C) 2012, 2013 Renesas Solutions Corp. + * Copyright (C) 2014 Glider bvba * * Based on spi-sh.c: * Copyright (C) 2011 Renesas Solutions Corp. @@ -25,14 +26,14 @@ #include <linux/kernel.h> #include <linux/sched.h> #include <linux/errno.h> -#include <linux/list.h> -#include <linux/workqueue.h> #include <linux/interrupt.h> #include <linux/platform_device.h> #include <linux/io.h> #include <linux/clk.h> #include <linux/dmaengine.h> #include <linux/dma-mapping.h> +#include <linux/of_device.h> +#include <linux/pm_runtime.h> #include <linux/sh_dma.h> #include <linux/spi/spi.h> #include <linux/spi/rspi.h> @@ -49,7 +50,7 @@ #define RSPI_SPCKD 0x0c /* Clock Delay Register */ #define RSPI_SSLND 0x0d /* Slave Select Negation Delay Register */ #define RSPI_SPND 0x0e /* Next-Access Delay Register */ -#define RSPI_SPCR2 0x0f /* Control Register 2 */ +#define RSPI_SPCR2 0x0f /* Control Register 2 (SH only) */ #define RSPI_SPCMD0 0x10 /* Command Register 0 */ #define RSPI_SPCMD1 0x12 /* Command Register 1 */ #define RSPI_SPCMD2 0x14 /* Command Register 2 */ @@ -58,16 +59,23 @@ #define RSPI_SPCMD5 0x1a /* Command Register 5 */ #define RSPI_SPCMD6 0x1c /* Command Register 6 */ #define RSPI_SPCMD7 0x1e /* Command Register 7 */ +#define RSPI_SPCMD(i) (RSPI_SPCMD0 + (i) * 2) +#define RSPI_NUM_SPCMD 8 +#define RSPI_RZ_NUM_SPCMD 4 +#define QSPI_NUM_SPCMD 4 + +/* RSPI on RZ only */ #define RSPI_SPBFCR 0x20 /* Buffer Control Register */ #define RSPI_SPBFDR 0x22 /* Buffer Data Count Setting Register */ -/*qspi only */ +/* QSPI only */ #define QSPI_SPBFCR 0x18 /* Buffer Control Register */ #define QSPI_SPBDCR 0x1a /* Buffer Data Count Register */ #define QSPI_SPBMUL0 0x1c /* Transfer Data Length Multiplier Setting Register 0 */ #define QSPI_SPBMUL1 0x20 /* Transfer Data Length Multiplier Setting Register 1 */ #define QSPI_SPBMUL2 0x24 /* Transfer Data Length Multiplier Setting Register 2 */ #define QSPI_SPBMUL3 0x28 /* Transfer Data Length Multiplier Setting Register 3 */ +#define QSPI_SPBMUL(i) (QSPI_SPBMUL0 + (i) * 4) /* SPCR - Control Register */ #define SPCR_SPRIE 0x80 /* Receive Interrupt Enable */ @@ -104,7 +112,7 @@ #define SPSR_PERF 0x08 /* Parity Error Flag */ #define SPSR_MODF 0x04 /* Mode Fault Error Flag */ #define SPSR_IDLNF 0x02 /* RSPI Idle Flag */ -#define SPSR_OVRF 0x01 /* Overrun Error Flag */ +#define SPSR_OVRF 0x01 /* Overrun Error Flag (RSPI only) */ /* SPSCR - Sequence Control Register */ #define SPSCR_SPSLN_MASK 0x07 /* Sequence Length Specification */ @@ -121,13 +129,13 @@ #define SPDCR_SPLWORD SPDCR_SPLW1 #define SPDCR_SPLBYTE SPDCR_SPLW0 #define SPDCR_SPLW 0x20 /* Access Width Specification (SH) */ -#define SPDCR_SPRDTD 0x10 /* Receive Transmit Data Select */ +#define SPDCR_SPRDTD 0x10 /* Receive Transmit Data Select (SH) */ #define SPDCR_SLSEL1 0x08 #define SPDCR_SLSEL0 0x04 -#define SPDCR_SLSEL_MASK 0x0c /* SSL1 Output Select */ +#define SPDCR_SLSEL_MASK 0x0c /* SSL1 Output Select (SH) */ #define SPDCR_SPFC1 0x02 #define SPDCR_SPFC0 0x01 -#define SPDCR_SPFC_MASK 0x03 /* Frame Count Setting (1-4) */ +#define SPDCR_SPFC_MASK 0x03 /* Frame Count Setting (1-4) (SH) */ /* SPCKD - Clock Delay Register */ #define SPCKD_SCKDL_MASK 0x07 /* Clock Delay Setting (1-8) */ @@ -151,7 +159,7 @@ #define SPCMD_LSBF 0x1000 /* LSB First */ #define SPCMD_SPB_MASK 0x0f00 /* Data Length Setting */ #define SPCMD_SPB_8_TO_16(bit) (((bit - 1) << 8) & SPCMD_SPB_MASK) -#define SPCMD_SPB_8BIT 0x0000 /* qspi only */ +#define SPCMD_SPB_8BIT 0x0000 /* QSPI only */ #define SPCMD_SPB_16BIT 0x0100 #define SPCMD_SPB_20BIT 0x0000 #define SPCMD_SPB_24BIT 0x0100 @@ -170,8 +178,8 @@ #define SPCMD_CPHA 0x0001 /* Clock Phase Setting */ /* SPBFCR - Buffer Control Register */ -#define SPBFCR_TXRST 0x80 /* Transmit Buffer Data Reset (qspi only) */ -#define SPBFCR_RXRST 0x40 /* Receive Buffer Data Reset (qspi only) */ +#define SPBFCR_TXRST 0x80 /* Transmit Buffer Data Reset */ +#define SPBFCR_RXRST 0x40 /* Receive Buffer Data Reset */ #define SPBFCR_TXTRG_MASK 0x30 /* Transmit Buffer Data Triggering Number */ #define SPBFCR_RXTRG_MASK 0x07 /* Receive Buffer Data Triggering Number */ @@ -181,22 +189,21 @@ struct rspi_data { void __iomem *addr; u32 max_speed_hz; struct spi_master *master; - struct list_head queue; - struct work_struct ws; wait_queue_head_t wait; - spinlock_t lock; struct clk *clk; - u8 spsr; u16 spcmd; + u8 spsr; + u8 sppcr; + int rx_irq, tx_irq; const struct spi_ops *ops; /* for dmaengine */ struct dma_chan *chan_tx; struct dma_chan *chan_rx; - int irq; unsigned dma_width_16bit:1; unsigned dma_callbacked:1; + unsigned byte_access:1; }; static void rspi_write8(const struct rspi_data *rspi, u8 data, u16 offset) @@ -224,34 +231,47 @@ static u16 rspi_read16(const struct rspi_data *rspi, u16 offset) return ioread16(rspi->addr + offset); } +static void rspi_write_data(const struct rspi_data *rspi, u16 data) +{ + if (rspi->byte_access) + rspi_write8(rspi, data, RSPI_SPDR); + else /* 16 bit */ + rspi_write16(rspi, data, RSPI_SPDR); +} + +static u16 rspi_read_data(const struct rspi_data *rspi) +{ + if (rspi->byte_access) + return rspi_read8(rspi, RSPI_SPDR); + else /* 16 bit */ + return rspi_read16(rspi, RSPI_SPDR); +} + /* optional functions */ struct spi_ops { - int (*set_config_register)(const struct rspi_data *rspi, - int access_size); - int (*send_pio)(struct rspi_data *rspi, struct spi_message *mesg, - struct spi_transfer *t); - int (*receive_pio)(struct rspi_data *rspi, struct spi_message *mesg, - struct spi_transfer *t); - + int (*set_config_register)(struct rspi_data *rspi, int access_size); + int (*transfer_one)(struct spi_master *master, struct spi_device *spi, + struct spi_transfer *xfer); + u16 mode_bits; }; /* - * functions for RSPI + * functions for RSPI on legacy SH */ -static int rspi_set_config_register(const struct rspi_data *rspi, - int access_size) +static int rspi_set_config_register(struct rspi_data *rspi, int access_size) { int spbr; - /* Sets output mode(CMOS) and MOSI signal(from previous transfer) */ - rspi_write8(rspi, 0x00, RSPI_SPPCR); + /* Sets output mode, MOSI signal, and (optionally) loopback */ + rspi_write8(rspi, rspi->sppcr, RSPI_SPPCR); /* Sets transfer bit rate */ spbr = clk_get_rate(rspi->clk) / (2 * rspi->max_speed_hz) - 1; rspi_write8(rspi, clamp(spbr, 0, 255), RSPI_SPBR); - /* Sets number of frames to be used: 1 frame */ - rspi_write8(rspi, 0x00, RSPI_SPDCR); + /* Disable dummy transmission, set 16-bit word access, 1 frame */ + rspi_write8(rspi, 0, RSPI_SPDCR); + rspi->byte_access = 0; /* Sets RSPCK, SSL, next-access delay value */ rspi_write8(rspi, 0x00, RSPI_SPCKD); @@ -262,8 +282,41 @@ static int rspi_set_config_register(const struct rspi_data *rspi, rspi_write8(rspi, 0x00, RSPI_SPCR2); /* Sets SPCMD */ - rspi_write16(rspi, SPCMD_SPB_8_TO_16(access_size) | rspi->spcmd, - RSPI_SPCMD0); + rspi->spcmd |= SPCMD_SPB_8_TO_16(access_size); + rspi_write16(rspi, rspi->spcmd, RSPI_SPCMD0); + + /* Sets RSPI mode */ + rspi_write8(rspi, SPCR_MSTR, RSPI_SPCR); + + return 0; +} + +/* + * functions for RSPI on RZ + */ +static int rspi_rz_set_config_register(struct rspi_data *rspi, int access_size) +{ + int spbr; + + /* Sets output mode, MOSI signal, and (optionally) loopback */ + rspi_write8(rspi, rspi->sppcr, RSPI_SPPCR); + + /* Sets transfer bit rate */ + spbr = clk_get_rate(rspi->clk) / (2 * rspi->max_speed_hz) - 1; + rspi_write8(rspi, clamp(spbr, 0, 255), RSPI_SPBR); + + /* Disable dummy transmission, set byte access */ + rspi_write8(rspi, SPDCR_SPLBYTE, RSPI_SPDCR); + rspi->byte_access = 1; + + /* Sets RSPCK, SSL, next-access delay value */ + rspi_write8(rspi, 0x00, RSPI_SPCKD); + rspi_write8(rspi, 0x00, RSPI_SSLND); + rspi_write8(rspi, 0x00, RSPI_SPND); + + /* Sets SPCMD */ + rspi->spcmd |= SPCMD_SPB_8_TO_16(access_size); + rspi_write16(rspi, rspi->spcmd, RSPI_SPCMD0); /* Sets RSPI mode */ rspi_write8(rspi, SPCR_MSTR, RSPI_SPCR); @@ -274,21 +327,20 @@ static int rspi_set_config_register(const struct rspi_data *rspi, /* * functions for QSPI */ -static int qspi_set_config_register(const struct rspi_data *rspi, - int access_size) +static int qspi_set_config_register(struct rspi_data *rspi, int access_size) { - u16 spcmd; int spbr; - /* Sets output mode(CMOS) and MOSI signal(from previous transfer) */ - rspi_write8(rspi, 0x00, RSPI_SPPCR); + /* Sets output mode, MOSI signal, and (optionally) loopback */ + rspi_write8(rspi, rspi->sppcr, RSPI_SPPCR); /* Sets transfer bit rate */ spbr = clk_get_rate(rspi->clk) / (2 * rspi->max_speed_hz); rspi_write8(rspi, clamp(spbr, 0, 255), RSPI_SPBR); - /* Sets number of frames to be used: 1 frame */ - rspi_write8(rspi, 0x00, RSPI_SPDCR); + /* Disable dummy transmission, set byte access */ + rspi_write8(rspi, 0, RSPI_SPDCR); + rspi->byte_access = 1; /* Sets RSPCK, SSL, next-access delay value */ rspi_write8(rspi, 0x00, RSPI_SPCKD); @@ -297,13 +349,13 @@ static int qspi_set_config_register(const struct rspi_data *rspi, /* Data Length Setting */ if (access_size == 8) - spcmd = SPCMD_SPB_8BIT; + rspi->spcmd |= SPCMD_SPB_8BIT; else if (access_size == 16) - spcmd = SPCMD_SPB_16BIT; + rspi->spcmd |= SPCMD_SPB_16BIT; else - spcmd = SPCMD_SPB_32BIT; + rspi->spcmd |= SPCMD_SPB_32BIT; - spcmd |= SPCMD_SCKDEN | SPCMD_SLNDEN | rspi->spcmd | SPCMD_SPNDEN; + rspi->spcmd |= SPCMD_SCKDEN | SPCMD_SLNDEN | SPCMD_SPNDEN; /* Resets transfer data length */ rspi_write32(rspi, 0, QSPI_SPBMUL0); @@ -314,9 +366,9 @@ static int qspi_set_config_register(const struct rspi_data *rspi, rspi_write8(rspi, 0x00, QSPI_SPBFCR); /* Sets SPCMD */ - rspi_write16(rspi, spcmd, RSPI_SPCMD0); + rspi_write16(rspi, rspi->spcmd, RSPI_SPCMD0); - /* Enables SPI function in a master mode */ + /* Enables SPI function in master mode */ rspi_write8(rspi, SPCR_SPE | SPCR_MSTR, RSPI_SPCR); return 0; @@ -340,6 +392,9 @@ static int rspi_wait_for_interrupt(struct rspi_data *rspi, u8 wait_mask, int ret; rspi->spsr = rspi_read8(rspi, RSPI_SPSR); + if (rspi->spsr & wait_mask) + return 0; + rspi_enable_irq(rspi, enable_bit); ret = wait_event_timeout(rspi->wait, rspi->spsr & wait_mask, HZ); if (ret == 0 && !(rspi->spsr & wait_mask)) @@ -348,78 +403,39 @@ static int rspi_wait_for_interrupt(struct rspi_data *rspi, u8 wait_mask, return 0; } -static void rspi_assert_ssl(const struct rspi_data *rspi) -{ - rspi_write8(rspi, rspi_read8(rspi, RSPI_SPCR) | SPCR_SPE, RSPI_SPCR); -} - -static void rspi_negate_ssl(const struct rspi_data *rspi) +static int rspi_data_out(struct rspi_data *rspi, u8 data) { - rspi_write8(rspi, rspi_read8(rspi, RSPI_SPCR) & ~SPCR_SPE, RSPI_SPCR); + if (rspi_wait_for_interrupt(rspi, SPSR_SPTEF, SPCR_SPTIE) < 0) { + dev_err(&rspi->master->dev, "transmit timeout\n"); + return -ETIMEDOUT; + } + rspi_write_data(rspi, data); + return 0; } -static int rspi_send_pio(struct rspi_data *rspi, struct spi_message *mesg, - struct spi_transfer *t) +static int rspi_data_in(struct rspi_data *rspi) { - int remain = t->len; - const u8 *data = t->tx_buf; - while (remain > 0) { - rspi_write8(rspi, rspi_read8(rspi, RSPI_SPCR) | SPCR_TXMD, - RSPI_SPCR); - - if (rspi_wait_for_interrupt(rspi, SPSR_SPTEF, SPCR_SPTIE) < 0) { - dev_err(&rspi->master->dev, - "%s: tx empty timeout\n", __func__); - return -ETIMEDOUT; - } + u8 data; - rspi_write16(rspi, *data, RSPI_SPDR); - data++; - remain--; + if (rspi_wait_for_interrupt(rspi, SPSR_SPRF, SPCR_SPRIE) < 0) { + dev_err(&rspi->master->dev, "receive timeout\n"); + return -ETIMEDOUT; } - - /* Waiting for the last transmission */ - rspi_wait_for_interrupt(rspi, SPSR_SPTEF, SPCR_SPTIE); - - return 0; + data = rspi_read_data(rspi); + return data; } -static int qspi_send_pio(struct rspi_data *rspi, struct spi_message *mesg, - struct spi_transfer *t) +static int rspi_data_out_in(struct rspi_data *rspi, u8 data) { - int remain = t->len; - const u8 *data = t->tx_buf; - - rspi_write8(rspi, SPBFCR_TXRST, QSPI_SPBFCR); - rspi_write8(rspi, 0x00, QSPI_SPBFCR); - - while (remain > 0) { - - if (rspi_wait_for_interrupt(rspi, SPSR_SPTEF, SPCR_SPTIE) < 0) { - dev_err(&rspi->master->dev, - "%s: tx empty timeout\n", __func__); - return -ETIMEDOUT; - } - rspi_write8(rspi, *data++, RSPI_SPDR); - - if (rspi_wait_for_interrupt(rspi, SPSR_SPRF, SPCR_SPRIE) < 0) { - dev_err(&rspi->master->dev, - "%s: receive timeout\n", __func__); - return -ETIMEDOUT; - } - rspi_read8(rspi, RSPI_SPDR); - - remain--; - } + int ret; - /* Waiting for the last transmission */ - rspi_wait_for_interrupt(rspi, SPSR_SPTEF, SPCR_SPTIE); + ret = rspi_data_out(rspi, data); + if (ret < 0) + return ret; - return 0; + return rspi_data_in(rspi); } -#define send_pio(spi, mesg, t) spi->ops->send_pio(spi, mesg, t) - static void rspi_dma_complete(void *arg) { struct rspi_data *rspi = arg; @@ -471,7 +487,7 @@ static int rspi_send_dma(struct rspi_data *rspi, struct spi_transfer *t) struct scatterlist sg; const void *buf = NULL; struct dma_async_tx_descriptor *desc; - unsigned len; + unsigned int len; int ret = 0; if (rspi->dma_width_16bit) { @@ -509,7 +525,7 @@ static int rspi_send_dma(struct rspi_data *rspi, struct spi_transfer *t) * DMAC needs SPTIE, but if SPTIE is set, this IRQ routine will be * called. So, this driver disables the IRQ while DMA transfer. */ - disable_irq(rspi->irq); + disable_irq(rspi->tx_irq); rspi_write8(rspi, rspi_read8(rspi, RSPI_SPCR) | SPCR_TXMD, RSPI_SPCR); rspi_enable_irq(rspi, SPCR_SPTIE); @@ -528,7 +544,7 @@ static int rspi_send_dma(struct rspi_data *rspi, struct spi_transfer *t) ret = -ETIMEDOUT; rspi_disable_irq(rspi, SPCR_SPTIE); - enable_irq(rspi->irq); + enable_irq(rspi->tx_irq); end: rspi_dma_unmap_sg(&sg, rspi->chan_tx, DMA_TO_DEVICE); @@ -545,46 +561,17 @@ static void rspi_receive_init(const struct rspi_data *rspi) spsr = rspi_read8(rspi, RSPI_SPSR); if (spsr & SPSR_SPRF) - rspi_read16(rspi, RSPI_SPDR); /* dummy read */ + rspi_read_data(rspi); /* dummy read */ if (spsr & SPSR_OVRF) rspi_write8(rspi, rspi_read8(rspi, RSPI_SPSR) & ~SPSR_OVRF, RSPI_SPSR); } -static int rspi_receive_pio(struct rspi_data *rspi, struct spi_message *mesg, - struct spi_transfer *t) +static void rspi_rz_receive_init(const struct rspi_data *rspi) { - int remain = t->len; - u8 *data; - rspi_receive_init(rspi); - - data = t->rx_buf; - while (remain > 0) { - rspi_write8(rspi, rspi_read8(rspi, RSPI_SPCR) & ~SPCR_TXMD, - RSPI_SPCR); - - if (rspi_wait_for_interrupt(rspi, SPSR_SPTEF, SPCR_SPTIE) < 0) { - dev_err(&rspi->master->dev, - "%s: tx empty timeout\n", __func__); - return -ETIMEDOUT; - } - /* dummy write for generate clock */ - rspi_write16(rspi, DUMMY_DATA, RSPI_SPDR); - - if (rspi_wait_for_interrupt(rspi, SPSR_SPRF, SPCR_SPRIE) < 0) { - dev_err(&rspi->master->dev, - "%s: receive timeout\n", __func__); - return -ETIMEDOUT; - } - /* SPDR allows 16 or 32-bit access only */ - *data = (u8)rspi_read16(rspi, RSPI_SPDR); - - data++; - remain--; - } - - return 0; + rspi_write8(rspi, SPBFCR_TXRST | SPBFCR_RXRST, RSPI_SPBFCR); + rspi_write8(rspi, 0, RSPI_SPBFCR); } static void qspi_receive_init(const struct rspi_data *rspi) @@ -593,51 +580,17 @@ static void qspi_receive_init(const struct rspi_data *rspi) spsr = rspi_read8(rspi, RSPI_SPSR); if (spsr & SPSR_SPRF) - rspi_read8(rspi, RSPI_SPDR); /* dummy read */ + rspi_read_data(rspi); /* dummy read */ rspi_write8(rspi, SPBFCR_TXRST | SPBFCR_RXRST, QSPI_SPBFCR); - rspi_write8(rspi, 0x00, QSPI_SPBFCR); + rspi_write8(rspi, 0, QSPI_SPBFCR); } -static int qspi_receive_pio(struct rspi_data *rspi, struct spi_message *mesg, - struct spi_transfer *t) -{ - int remain = t->len; - u8 *data; - - qspi_receive_init(rspi); - - data = t->rx_buf; - while (remain > 0) { - - if (rspi_wait_for_interrupt(rspi, SPSR_SPTEF, SPCR_SPTIE) < 0) { - dev_err(&rspi->master->dev, - "%s: tx empty timeout\n", __func__); - return -ETIMEDOUT; - } - /* dummy write for generate clock */ - rspi_write8(rspi, DUMMY_DATA, RSPI_SPDR); - - if (rspi_wait_for_interrupt(rspi, SPSR_SPRF, SPCR_SPRIE) < 0) { - dev_err(&rspi->master->dev, - "%s: receive timeout\n", __func__); - return -ETIMEDOUT; - } - /* SPDR allows 8, 16 or 32-bit access */ - *data++ = rspi_read8(rspi, RSPI_SPDR); - remain--; - } - - return 0; -} - -#define receive_pio(spi, mesg, t) spi->ops->receive_pio(spi, mesg, t) - static int rspi_receive_dma(struct rspi_data *rspi, struct spi_transfer *t) { struct scatterlist sg, sg_dummy; void *dummy = NULL, *rx_buf = NULL; struct dma_async_tx_descriptor *desc, *desc_dummy; - unsigned len; + unsigned int len; int ret = 0; if (rspi->dma_width_16bit) { @@ -695,7 +648,9 @@ static int rspi_receive_dma(struct rspi_data *rspi, struct spi_transfer *t) * DMAC needs SPTIE, but if SPTIE is set, this IRQ routine will be * called. So, this driver disables the IRQ while DMA transfer. */ - disable_irq(rspi->irq); + disable_irq(rspi->tx_irq); + if (rspi->rx_irq != rspi->tx_irq) + disable_irq(rspi->rx_irq); rspi_write8(rspi, rspi_read8(rspi, RSPI_SPCR) & ~SPCR_TXMD, RSPI_SPCR); rspi_enable_irq(rspi, SPCR_SPTIE | SPCR_SPRIE); @@ -718,7 +673,9 @@ static int rspi_receive_dma(struct rspi_data *rspi, struct spi_transfer *t) ret = -ETIMEDOUT; rspi_disable_irq(rspi, SPCR_SPTIE | SPCR_SPRIE); - enable_irq(rspi->irq); + enable_irq(rspi->tx_irq); + if (rspi->rx_irq != rspi->tx_irq) + enable_irq(rspi->rx_irq); end: rspi_dma_unmap_sg(&sg, rspi->chan_rx, DMA_FROM_DEVICE); @@ -746,56 +703,175 @@ static int rspi_is_dma(const struct rspi_data *rspi, struct spi_transfer *t) return 0; } -static void rspi_work(struct work_struct *work) +static int rspi_transfer_out_in(struct rspi_data *rspi, + struct spi_transfer *xfer) { - struct rspi_data *rspi = container_of(work, struct rspi_data, ws); - struct spi_message *mesg; - struct spi_transfer *t; - unsigned long flags; - int ret; + int remain = xfer->len, ret; + const u8 *tx_buf = xfer->tx_buf; + u8 *rx_buf = xfer->rx_buf; + u8 spcr, data; - while (1) { - spin_lock_irqsave(&rspi->lock, flags); - if (list_empty(&rspi->queue)) { - spin_unlock_irqrestore(&rspi->lock, flags); - break; - } - mesg = list_entry(rspi->queue.next, struct spi_message, queue); - list_del_init(&mesg->queue); - spin_unlock_irqrestore(&rspi->lock, flags); - - rspi_assert_ssl(rspi); - - list_for_each_entry(t, &mesg->transfers, transfer_list) { - if (t->tx_buf) { - if (rspi_is_dma(rspi, t)) - ret = rspi_send_dma(rspi, t); - else - ret = send_pio(rspi, mesg, t); - if (ret < 0) - goto error; - } - if (t->rx_buf) { - if (rspi_is_dma(rspi, t)) - ret = rspi_receive_dma(rspi, t); - else - ret = receive_pio(rspi, mesg, t); - if (ret < 0) - goto error; - } - mesg->actual_length += t->len; + rspi_receive_init(rspi); + + spcr = rspi_read8(rspi, RSPI_SPCR); + if (rx_buf) + spcr &= ~SPCR_TXMD; + else + spcr |= SPCR_TXMD; + rspi_write8(rspi, spcr, RSPI_SPCR); + + while (remain > 0) { + data = tx_buf ? *tx_buf++ : DUMMY_DATA; + ret = rspi_data_out(rspi, data); + if (ret < 0) + return ret; + if (rx_buf) { + ret = rspi_data_in(rspi); + if (ret < 0) + return ret; + *rx_buf++ = ret; } - rspi_negate_ssl(rspi); + remain--; + } + + /* Wait for the last transmission */ + rspi_wait_for_interrupt(rspi, SPSR_SPTEF, SPCR_SPTIE); + + return 0; +} + +static int rspi_transfer_one(struct spi_master *master, struct spi_device *spi, + struct spi_transfer *xfer) +{ + struct rspi_data *rspi = spi_master_get_devdata(master); + int ret; + + if (!rspi_is_dma(rspi, xfer)) + return rspi_transfer_out_in(rspi, xfer); + + if (xfer->tx_buf) { + ret = rspi_send_dma(rspi, xfer); + if (ret < 0) + return ret; + } + if (xfer->rx_buf) + return rspi_receive_dma(rspi, xfer); + + return 0; +} + +static int rspi_rz_transfer_out_in(struct rspi_data *rspi, + struct spi_transfer *xfer) +{ + int remain = xfer->len, ret; + const u8 *tx_buf = xfer->tx_buf; + u8 *rx_buf = xfer->rx_buf; + u8 data; + + rspi_rz_receive_init(rspi); + + while (remain > 0) { + data = tx_buf ? *tx_buf++ : DUMMY_DATA; + ret = rspi_data_out_in(rspi, data); + if (ret < 0) + return ret; + if (rx_buf) + *rx_buf++ = ret; + remain--; + } + + /* Wait for the last transmission */ + rspi_wait_for_interrupt(rspi, SPSR_SPTEF, SPCR_SPTIE); + + return 0; +} + +static int rspi_rz_transfer_one(struct spi_master *master, + struct spi_device *spi, + struct spi_transfer *xfer) +{ + struct rspi_data *rspi = spi_master_get_devdata(master); + + return rspi_rz_transfer_out_in(rspi, xfer); +} + +static int qspi_transfer_out_in(struct rspi_data *rspi, + struct spi_transfer *xfer) +{ + int remain = xfer->len, ret; + const u8 *tx_buf = xfer->tx_buf; + u8 *rx_buf = xfer->rx_buf; + u8 data; - mesg->status = 0; - mesg->complete(mesg->context); + qspi_receive_init(rspi); + + while (remain > 0) { + data = tx_buf ? *tx_buf++ : DUMMY_DATA; + ret = rspi_data_out_in(rspi, data); + if (ret < 0) + return ret; + if (rx_buf) + *rx_buf++ = ret; + remain--; + } + + /* Wait for the last transmission */ + rspi_wait_for_interrupt(rspi, SPSR_SPTEF, SPCR_SPTIE); + + return 0; +} + +static int qspi_transfer_out(struct rspi_data *rspi, struct spi_transfer *xfer) +{ + const u8 *buf = xfer->tx_buf; + unsigned int i; + int ret; + + for (i = 0; i < xfer->len; i++) { + ret = rspi_data_out(rspi, *buf++); + if (ret < 0) + return ret; } - return; + /* Wait for the last transmission */ + rspi_wait_for_interrupt(rspi, SPSR_SPTEF, SPCR_SPTIE); -error: - mesg->status = ret; - mesg->complete(mesg->context); + return 0; +} + +static int qspi_transfer_in(struct rspi_data *rspi, struct spi_transfer *xfer) +{ + u8 *buf = xfer->rx_buf; + unsigned int i; + int ret; + + for (i = 0; i < xfer->len; i++) { + ret = rspi_data_in(rspi); + if (ret < 0) + return ret; + *buf++ = ret; + } + + return 0; +} + +static int qspi_transfer_one(struct spi_master *master, struct spi_device *spi, + struct spi_transfer *xfer) +{ + struct rspi_data *rspi = spi_master_get_devdata(master); + + if (spi->mode & SPI_LOOP) { + return qspi_transfer_out_in(rspi, xfer); + } else if (xfer->tx_buf && xfer->tx_nbits > SPI_NBITS_SINGLE) { + /* Quad or Dual SPI Write */ + return qspi_transfer_out(rspi, xfer); + } else if (xfer->rx_buf && xfer->rx_nbits > SPI_NBITS_SINGLE) { + /* Quad or Dual SPI Read */ + return qspi_transfer_in(rspi, xfer); + } else { + /* Single SPI Transfer */ + return qspi_transfer_out_in(rspi, xfer); + } } static int rspi_setup(struct spi_device *spi) @@ -810,32 +886,115 @@ static int rspi_setup(struct spi_device *spi) if (spi->mode & SPI_CPHA) rspi->spcmd |= SPCMD_CPHA; + /* CMOS output mode and MOSI signal from previous transfer */ + rspi->sppcr = 0; + if (spi->mode & SPI_LOOP) + rspi->sppcr |= SPPCR_SPLP; + set_config_register(rspi, 8); return 0; } -static int rspi_transfer(struct spi_device *spi, struct spi_message *mesg) +static u16 qspi_transfer_mode(const struct spi_transfer *xfer) { - struct rspi_data *rspi = spi_master_get_devdata(spi->master); - unsigned long flags; + if (xfer->tx_buf) + switch (xfer->tx_nbits) { + case SPI_NBITS_QUAD: + return SPCMD_SPIMOD_QUAD; + case SPI_NBITS_DUAL: + return SPCMD_SPIMOD_DUAL; + default: + return 0; + } + if (xfer->rx_buf) + switch (xfer->rx_nbits) { + case SPI_NBITS_QUAD: + return SPCMD_SPIMOD_QUAD | SPCMD_SPRW; + case SPI_NBITS_DUAL: + return SPCMD_SPIMOD_DUAL | SPCMD_SPRW; + default: + return 0; + } + + return 0; +} - mesg->actual_length = 0; - mesg->status = -EINPROGRESS; +static int qspi_setup_sequencer(struct rspi_data *rspi, + const struct spi_message *msg) +{ + const struct spi_transfer *xfer; + unsigned int i = 0, len = 0; + u16 current_mode = 0xffff, mode; + + list_for_each_entry(xfer, &msg->transfers, transfer_list) { + mode = qspi_transfer_mode(xfer); + if (mode == current_mode) { + len += xfer->len; + continue; + } + + /* Transfer mode change */ + if (i) { + /* Set transfer data length of previous transfer */ + rspi_write32(rspi, len, QSPI_SPBMUL(i - 1)); + } - spin_lock_irqsave(&rspi->lock, flags); - list_add_tail(&mesg->queue, &rspi->queue); - schedule_work(&rspi->ws); - spin_unlock_irqrestore(&rspi->lock, flags); + if (i >= QSPI_NUM_SPCMD) { + dev_err(&msg->spi->dev, + "Too many different transfer modes"); + return -EINVAL; + } + + /* Program transfer mode for this transfer */ + rspi_write16(rspi, rspi->spcmd | mode, RSPI_SPCMD(i)); + current_mode = mode; + len = xfer->len; + i++; + } + if (i) { + /* Set final transfer data length and sequence length */ + rspi_write32(rspi, len, QSPI_SPBMUL(i - 1)); + rspi_write8(rspi, i - 1, RSPI_SPSCR); + } return 0; } -static void rspi_cleanup(struct spi_device *spi) +static int rspi_prepare_message(struct spi_master *master, + struct spi_message *msg) { + struct rspi_data *rspi = spi_master_get_devdata(master); + int ret; + + if (msg->spi->mode & + (SPI_TX_DUAL | SPI_TX_QUAD | SPI_RX_DUAL | SPI_RX_QUAD)) { + /* Setup sequencer for messages with multiple transfer modes */ + ret = qspi_setup_sequencer(rspi, msg); + if (ret < 0) + return ret; + } + + /* Enable SPI function in master mode */ + rspi_write8(rspi, rspi_read8(rspi, RSPI_SPCR) | SPCR_SPE, RSPI_SPCR); + return 0; } -static irqreturn_t rspi_irq(int irq, void *_sr) +static int rspi_unprepare_message(struct spi_master *master, + struct spi_message *msg) +{ + struct rspi_data *rspi = spi_master_get_devdata(master); + + /* Disable SPI function */ + rspi_write8(rspi, rspi_read8(rspi, RSPI_SPCR) & ~SPCR_SPE, RSPI_SPCR); + + /* Reset sequencer for Single SPI Transfers */ + rspi_write16(rspi, rspi->spcmd, RSPI_SPCMD0); + rspi_write8(rspi, 0, RSPI_SPSCR); + return 0; +} + +static irqreturn_t rspi_irq_mux(int irq, void *_sr) { struct rspi_data *rspi = _sr; u8 spsr; @@ -857,6 +1016,36 @@ static irqreturn_t rspi_irq(int irq, void *_sr) return ret; } +static irqreturn_t rspi_irq_rx(int irq, void *_sr) +{ + struct rspi_data *rspi = _sr; + u8 spsr; + + rspi->spsr = spsr = rspi_read8(rspi, RSPI_SPSR); + if (spsr & SPSR_SPRF) { + rspi_disable_irq(rspi, SPCR_SPRIE); + wake_up(&rspi->wait); + return IRQ_HANDLED; + } + + return 0; +} + +static irqreturn_t rspi_irq_tx(int irq, void *_sr) +{ + struct rspi_data *rspi = _sr; + u8 spsr; + + rspi->spsr = spsr = rspi_read8(rspi, RSPI_SPSR); + if (spsr & SPSR_SPTEF) { + rspi_disable_irq(rspi, SPCR_SPTIE); + wake_up(&rspi->wait); + return IRQ_HANDLED; + } + + return 0; +} + static int rspi_request_dma(struct rspi_data *rspi, struct platform_device *pdev) { @@ -923,34 +1112,89 @@ static int rspi_remove(struct platform_device *pdev) struct rspi_data *rspi = platform_get_drvdata(pdev); rspi_release_dma(rspi); - clk_disable(rspi->clk); + pm_runtime_disable(&pdev->dev); return 0; } +static const struct spi_ops rspi_ops = { + .set_config_register = rspi_set_config_register, + .transfer_one = rspi_transfer_one, + .mode_bits = SPI_CPHA | SPI_CPOL | SPI_LOOP, +}; + +static const struct spi_ops rspi_rz_ops = { + .set_config_register = rspi_rz_set_config_register, + .transfer_one = rspi_rz_transfer_one, + .mode_bits = SPI_CPHA | SPI_CPOL | SPI_LOOP, +}; + +static const struct spi_ops qspi_ops = { + .set_config_register = qspi_set_config_register, + .transfer_one = qspi_transfer_one, + .mode_bits = SPI_CPHA | SPI_CPOL | SPI_LOOP | + SPI_TX_DUAL | SPI_TX_QUAD | + SPI_RX_DUAL | SPI_RX_QUAD, +}; + +#ifdef CONFIG_OF +static const struct of_device_id rspi_of_match[] = { + /* RSPI on legacy SH */ + { .compatible = "renesas,rspi", .data = &rspi_ops }, + /* RSPI on RZ/A1H */ + { .compatible = "renesas,rspi-rz", .data = &rspi_rz_ops }, + /* QSPI on R-Car Gen2 */ + { .compatible = "renesas,qspi", .data = &qspi_ops }, + { /* sentinel */ } +}; + +MODULE_DEVICE_TABLE(of, rspi_of_match); + +static int rspi_parse_dt(struct device *dev, struct spi_master *master) +{ + u32 num_cs; + int error; + + /* Parse DT properties */ + error = of_property_read_u32(dev->of_node, "num-cs", &num_cs); + if (error) { + dev_err(dev, "of_property_read_u32 num-cs failed %d\n", error); + return error; + } + + master->num_chipselect = num_cs; + return 0; +} +#else +#define rspi_of_match NULL +static inline int rspi_parse_dt(struct device *dev, struct spi_master *master) +{ + return -EINVAL; +} +#endif /* CONFIG_OF */ + +static int rspi_request_irq(struct device *dev, unsigned int irq, + irq_handler_t handler, const char *suffix, + void *dev_id) +{ + const char *base = dev_name(dev); + size_t len = strlen(base) + strlen(suffix) + 2; + char *name = devm_kzalloc(dev, len, GFP_KERNEL); + if (!name) + return -ENOMEM; + snprintf(name, len, "%s:%s", base, suffix); + return devm_request_irq(dev, irq, handler, 0, name, dev_id); +} + static int rspi_probe(struct platform_device *pdev) { struct resource *res; struct spi_master *master; struct rspi_data *rspi; - int ret, irq; - char clk_name[16]; - const struct rspi_plat_data *rspi_pd = dev_get_platdata(&pdev->dev); + int ret; + const struct of_device_id *of_id; + const struct rspi_plat_data *rspi_pd; const struct spi_ops *ops; - const struct platform_device_id *id_entry = pdev->id_entry; - - ops = (struct spi_ops *)id_entry->driver_data; - /* ops parameter check */ - if (!ops->set_config_register) { - dev_err(&pdev->dev, "there is no set_config_register\n"); - return -ENODEV; - } - - irq = platform_get_irq(pdev, 0); - if (irq < 0) { - dev_err(&pdev->dev, "platform_get_irq error\n"); - return -ENODEV; - } master = spi_alloc_master(&pdev->dev, sizeof(struct rspi_data)); if (master == NULL) { @@ -958,6 +1202,28 @@ static int rspi_probe(struct platform_device *pdev) return -ENOMEM; } + of_id = of_match_device(rspi_of_match, &pdev->dev); + if (of_id) { + ops = of_id->data; + ret = rspi_parse_dt(&pdev->dev, master); + if (ret) + goto error1; + } else { + ops = (struct spi_ops *)pdev->id_entry->driver_data; + rspi_pd = dev_get_platdata(&pdev->dev); + if (rspi_pd && rspi_pd->num_chipselect) + master->num_chipselect = rspi_pd->num_chipselect; + else + master->num_chipselect = 2; /* default */ + }; + + /* ops parameter check */ + if (!ops->set_config_register) { + dev_err(&pdev->dev, "there is no set_config_register\n"); + ret = -ENODEV; + goto error1; + } + rspi = spi_master_get_devdata(master); platform_set_drvdata(pdev, rspi); rspi->ops = ops; @@ -970,39 +1236,61 @@ static int rspi_probe(struct platform_device *pdev) goto error1; } - snprintf(clk_name, sizeof(clk_name), "%s%d", id_entry->name, pdev->id); - rspi->clk = devm_clk_get(&pdev->dev, clk_name); + rspi->clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(rspi->clk)) { dev_err(&pdev->dev, "cannot get clock\n"); ret = PTR_ERR(rspi->clk); goto error1; } - clk_enable(rspi->clk); - INIT_LIST_HEAD(&rspi->queue); - spin_lock_init(&rspi->lock); - INIT_WORK(&rspi->ws, rspi_work); - init_waitqueue_head(&rspi->wait); + pm_runtime_enable(&pdev->dev); - if (rspi_pd && rspi_pd->num_chipselect) - master->num_chipselect = rspi_pd->num_chipselect; - else - master->num_chipselect = 2; /* default */ + init_waitqueue_head(&rspi->wait); master->bus_num = pdev->id; master->setup = rspi_setup; - master->transfer = rspi_transfer; - master->cleanup = rspi_cleanup; - master->mode_bits = SPI_CPHA | SPI_CPOL; + master->auto_runtime_pm = true; + master->transfer_one = ops->transfer_one; + master->prepare_message = rspi_prepare_message; + master->unprepare_message = rspi_unprepare_message; + master->mode_bits = ops->mode_bits; + master->dev.of_node = pdev->dev.of_node; + + ret = platform_get_irq_byname(pdev, "rx"); + if (ret < 0) { + ret = platform_get_irq_byname(pdev, "mux"); + if (ret < 0) + ret = platform_get_irq(pdev, 0); + if (ret >= 0) + rspi->rx_irq = rspi->tx_irq = ret; + } else { + rspi->rx_irq = ret; + ret = platform_get_irq_byname(pdev, "tx"); + if (ret >= 0) + rspi->tx_irq = ret; + } + if (ret < 0) { + dev_err(&pdev->dev, "platform_get_irq error\n"); + goto error2; + } - ret = devm_request_irq(&pdev->dev, irq, rspi_irq, 0, - dev_name(&pdev->dev), rspi); + if (rspi->rx_irq == rspi->tx_irq) { + /* Single multiplexed interrupt */ + ret = rspi_request_irq(&pdev->dev, rspi->rx_irq, rspi_irq_mux, + "mux", rspi); + } else { + /* Multi-interrupt mode, only SPRI and SPTI are used */ + ret = rspi_request_irq(&pdev->dev, rspi->rx_irq, rspi_irq_rx, + "rx", rspi); + if (!ret) + ret = rspi_request_irq(&pdev->dev, rspi->tx_irq, + rspi_irq_tx, "tx", rspi); + } if (ret < 0) { dev_err(&pdev->dev, "request_irq error\n"); goto error2; } - rspi->irq = irq; ret = rspi_request_dma(rspi, pdev); if (ret < 0) { dev_err(&pdev->dev, "rspi_request_dma failed.\n"); @@ -1022,27 +1310,16 @@ static int rspi_probe(struct platform_device *pdev) error3: rspi_release_dma(rspi); error2: - clk_disable(rspi->clk); + pm_runtime_disable(&pdev->dev); error1: spi_master_put(master); return ret; } -static struct spi_ops rspi_ops = { - .set_config_register = rspi_set_config_register, - .send_pio = rspi_send_pio, - .receive_pio = rspi_receive_pio, -}; - -static struct spi_ops qspi_ops = { - .set_config_register = qspi_set_config_register, - .send_pio = qspi_send_pio, - .receive_pio = qspi_receive_pio, -}; - static struct platform_device_id spi_driver_ids[] = { { "rspi", (kernel_ulong_t)&rspi_ops }, + { "rspi-rz", (kernel_ulong_t)&rspi_rz_ops }, { "qspi", (kernel_ulong_t)&qspi_ops }, {}, }; @@ -1056,6 +1333,7 @@ static struct platform_driver rspi_driver = { .driver = { .name = "renesas_spi", .owner = THIS_MODULE, + .of_match_table = of_match_ptr(rspi_of_match), }, }; module_platform_driver(rspi_driver); |