diff options
Diffstat (limited to 'drivers/soc/xilinx')
| -rw-r--r-- | drivers/soc/xilinx/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/soc/xilinx/xlnx_vcu.c | 19 |
2 files changed, 19 insertions, 2 deletions
diff --git a/drivers/soc/xilinx/Kconfig b/drivers/soc/xilinx/Kconfig index 0b1708dae361..9fe703772e5a 100644 --- a/drivers/soc/xilinx/Kconfig +++ b/drivers/soc/xilinx/Kconfig @@ -3,7 +3,7 @@ menu "Xilinx SoC drivers" config XILINX_VCU tristate "Xilinx VCU logicoreIP Init" - depends on HAS_IOMEM + depends on HAS_IOMEM && COMMON_CLK select REGMAP_MMIO help Provides the driver to enable and disable the isolation between the diff --git a/drivers/soc/xilinx/xlnx_vcu.c b/drivers/soc/xilinx/xlnx_vcu.c index 34f3299afc0d..6a733a181982 100644 --- a/drivers/soc/xilinx/xlnx_vcu.c +++ b/drivers/soc/xilinx/xlnx_vcu.c @@ -7,6 +7,7 @@ * Contacts Dhaval Shah <dshah@xilinx.com> */ #include <linux/clk.h> +#include <linux/clk-provider.h> #include <linux/device.h> #include <linux/errno.h> #include <linux/io.h> @@ -73,6 +74,7 @@ * @aclk: axi clock source * @logicore_reg_ba: logicore reg base address * @vcu_slcr_ba: vcu_slcr Register base address + * @pll: handle for the VCU PLL */ struct xvcu_device { struct device *dev; @@ -80,6 +82,7 @@ struct xvcu_device { struct clk *aclk; struct regmap *logicore_reg_ba; void __iomem *vcu_slcr_ba; + struct clk_hw *pll; }; static struct regmap_config vcu_settings_regmap_config = { @@ -403,7 +406,9 @@ static int xvcu_set_vcu_pll_info(struct xvcu_device *xvcu) u32 clkoutdiv, vcu_pll_ctrl, pll_clk; u32 mod, ctrl; int i; + int ret; const struct xvcu_pll_cfg *found = NULL; + struct clk_hw *hw; regmap_read(xvcu->logicore_reg_ba, VCU_PLL_CLK, &inte); regmap_read(xvcu->logicore_reg_ba, VCU_PLL_CLK_DEC, &deci); @@ -505,7 +510,18 @@ static int xvcu_set_vcu_pll_info(struct xvcu_device *xvcu) ctrl |= (VCU_SRCSEL_PLL & VCU_SRCSEL_MASK) << VCU_SRCSEL_SHIFT; xvcu_write(xvcu->vcu_slcr_ba, VCU_DEC_MCU_CTRL, ctrl); - return xvcu_pll_set_rate(xvcu, fvco, refclk); + ret = xvcu_pll_set_rate(xvcu, fvco, refclk); + if (ret) + return ret; + + hw = clk_hw_register_fixed_rate(xvcu->dev, "vcu_pll", + __clk_get_name(xvcu->pll_ref), + 0, pll_clk); + if (IS_ERR(hw)) + return PTR_ERR(hw); + xvcu->pll = hw; + + return 0; } /** @@ -652,6 +668,7 @@ static int xvcu_remove(struct platform_device *pdev) /* Add the the Gasket isolation and put the VCU in reset. */ regmap_write(xvcu->logicore_reg_ba, VCU_GASKET_INIT, 0); + clk_hw_unregister_fixed_rate(xvcu->pll); xvcu_pll_disable(xvcu); clk_disable_unprepare(xvcu->aclk); |