diff options
Diffstat (limited to 'drivers/slimbus')
| -rw-r--r-- | drivers/slimbus/Makefile | 2 | ||||
| -rw-r--r-- | drivers/slimbus/core.c | 2 | ||||
| -rw-r--r-- | drivers/slimbus/slimbus.h | 189 | ||||
| -rw-r--r-- | drivers/slimbus/stream.c | 477 |
4 files changed, 669 insertions, 1 deletions
diff --git a/drivers/slimbus/Makefile b/drivers/slimbus/Makefile index c78c6e16c2df..d9aa011b6804 100644 --- a/drivers/slimbus/Makefile +++ b/drivers/slimbus/Makefile @@ -3,7 +3,7 @@ # Makefile for kernel SLIMbus framework. # obj-$(CONFIG_SLIMBUS) += slimbus.o -slimbus-y := core.o messaging.o sched.o +slimbus-y := core.o messaging.o sched.o stream.o #Controllers obj-$(CONFIG_SLIM_QCOM_CTRL) += slim-qcom-ctrl.o diff --git a/drivers/slimbus/core.c b/drivers/slimbus/core.c index 88248a4ecad9..95b00d28ad6e 100644 --- a/drivers/slimbus/core.c +++ b/drivers/slimbus/core.c @@ -114,6 +114,8 @@ static int slim_add_device(struct slim_controller *ctrl, sbdev->dev.release = slim_dev_release; sbdev->dev.driver = NULL; sbdev->ctrl = ctrl; + INIT_LIST_HEAD(&sbdev->stream_list); + spin_lock_init(&sbdev->stream_list_lock); if (node) sbdev->dev.of_node = of_node_get(node); diff --git a/drivers/slimbus/slimbus.h b/drivers/slimbus/slimbus.h index 63229e8cd050..6dbc2b320704 100644 --- a/drivers/slimbus/slimbus.h +++ b/drivers/slimbus/slimbus.h @@ -45,9 +45,20 @@ #define SLIM_MSG_MC_ASSIGN_LOGICAL_ADDRESS 0x2 #define SLIM_MSG_MC_REPORT_ABSENT 0xF +/* Data channel management messages */ +#define SLIM_MSG_MC_CONNECT_SOURCE 0x10 +#define SLIM_MSG_MC_CONNECT_SINK 0x11 +#define SLIM_MSG_MC_DISCONNECT_PORT 0x14 +#define SLIM_MSG_MC_CHANGE_CONTENT 0x18 + /* Clock pause Reconfiguration messages */ #define SLIM_MSG_MC_BEGIN_RECONFIGURATION 0x40 #define SLIM_MSG_MC_NEXT_PAUSE_CLOCK 0x4A +#define SLIM_MSG_MC_NEXT_DEFINE_CHANNEL 0x50 +#define SLIM_MSG_MC_NEXT_DEFINE_CONTENT 0x51 +#define SLIM_MSG_MC_NEXT_ACTIVATE_CHANNEL 0x54 +#define SLIM_MSG_MC_NEXT_DEACTIVATE_CHANNEL 0x55 +#define SLIM_MSG_MC_NEXT_REMOVE_CHANNEL 0x58 #define SLIM_MSG_MC_RECONFIGURE_NOW 0x5F /* @@ -69,7 +80,15 @@ /* Standard values per SLIMbus spec needed by controllers and devices */ #define SLIM_MAX_CLK_GEAR 10 #define SLIM_MIN_CLK_GEAR 1 +#define SLIM_SLOT_LEN_BITS 4 + +/* Indicate that the frequency of the flow and the bus frequency are locked */ +#define SLIM_CHANNEL_CONTENT_FL BIT(7) +/* Standard values per SLIMbus spec needed by controllers and devices */ +#define SLIM_CL_PER_SUPERFRAME 6144 +#define SLIM_SLOTS_PER_SUPERFRAME (SLIM_CL_PER_SUPERFRAME >> 2) +#define SLIM_SL_PER_SUPERFRAME (SLIM_CL_PER_SUPERFRAME >> 2) /* Manager's logical address is set to 0xFF per spec */ #define SLIM_LA_MANAGER 0xFF @@ -168,6 +187,170 @@ struct slim_sched { }; /** + * enum slim_port_direction: SLIMbus port direction + * + * @SLIM_PORT_SINK: SLIMbus port is a sink + * @SLIM_PORT_SOURCE: SLIMbus port is a source + */ +enum slim_port_direction { + SLIM_PORT_SINK = 0, + SLIM_PORT_SOURCE, +}; +/** + * enum slim_port_state: SLIMbus Port/Endpoint state machine + * according to SLIMbus Spec 2.0 + * @SLIM_PORT_DISCONNECTED: SLIMbus port is disconnected + * entered from Unconfigure/configured state after + * DISCONNECT_PORT or REMOVE_CHANNEL core command + * @SLIM_PORT_UNCONFIGURED: SLIMbus port is in unconfigured state. + * entered from disconnect state after CONNECT_SOURCE/SINK core command + * @SLIM_PORT_CONFIGURED: SLIMbus port is in configured state. + * entered from unconfigured state after DEFINE_CHANNEL, DEFINE_CONTENT + * and ACTIVATE_CHANNEL core commands. Ready for data transmission. + */ +enum slim_port_state { + SLIM_PORT_DISCONNECTED = 0, + SLIM_PORT_UNCONFIGURED, + SLIM_PORT_CONFIGURED, +}; + +/** + * enum slim_channel_state: SLIMbus channel state machine used by core. + * @SLIM_CH_STATE_DISCONNECTED: SLIMbus channel is disconnected + * @SLIM_CH_STATE_ALLOCATED: SLIMbus channel is allocated + * @SLIM_CH_STATE_ASSOCIATED: SLIMbus channel is associated with port + * @SLIM_CH_STATE_DEFINED: SLIMbus channel parameters are defined + * @SLIM_CH_STATE_CONTENT_DEFINED: SLIMbus channel content is defined + * @SLIM_CH_STATE_ACTIVE: SLIMbus channel is active and ready for data + * @SLIM_CH_STATE_REMOVED: SLIMbus channel is inactive and removed + */ +enum slim_channel_state { + SLIM_CH_STATE_DISCONNECTED = 0, + SLIM_CH_STATE_ALLOCATED, + SLIM_CH_STATE_ASSOCIATED, + SLIM_CH_STATE_DEFINED, + SLIM_CH_STATE_CONTENT_DEFINED, + SLIM_CH_STATE_ACTIVE, + SLIM_CH_STATE_REMOVED, +}; + +/** + * enum slim_ch_data_fmt: SLIMbus channel data Type identifiers according to + * Table 60 of SLIMbus Spec 1.01.01 + * @SLIM_CH_DATA_FMT_NOT_DEFINED: Undefined + * @SLIM_CH_DATA_FMT_LPCM_AUDIO: LPCM audio + * @SLIM_CH_DATA_FMT_IEC61937_COMP_AUDIO: IEC61937 Compressed audio + * @SLIM_CH_DATA_FMT_PACKED_PDM_AUDIO: Packed PDM audio + */ +enum slim_ch_data_fmt { + SLIM_CH_DATA_FMT_NOT_DEFINED = 0, + SLIM_CH_DATA_FMT_LPCM_AUDIO = 1, + SLIM_CH_DATA_FMT_IEC61937_COMP_AUDIO = 2, + SLIM_CH_DATA_FMT_PACKED_PDM_AUDIO = 3, +}; + +/** + * enum slim_ch_aux_fmt: SLIMbus channel Aux Field format IDs according to + * Table 63 of SLIMbus Spec 2.0 + * @SLIM_CH_AUX_FMT_NOT_APPLICABLE: Undefined + * @SLIM_CH_AUX_FMT_ZCUV_TUNNEL_IEC60958: ZCUV for tunneling IEC60958 + * @SLIM_CH_AUX_FMT_USER_DEFINED: User defined + */ +enum slim_ch_aux_bit_fmt { + SLIM_CH_AUX_FMT_NOT_APPLICABLE = 0, + SLIM_CH_AUX_FMT_ZCUV_TUNNEL_IEC60958 = 1, + SLIM_CH_AUX_FMT_USER_DEFINED = 0xF, +}; + +/** + * struct slim_channel - SLIMbus channel, used for state machine + * + * @id: ID of channel + * @prrate: Presense rate of channel from Table 66 of SLIMbus 2.0 Specs + * @seg_dist: segment distribution code from Table 20 of SLIMbus 2.0 Specs + * @data_fmt: Data format of channel. + * @aux_fmt: Aux format for this channel. + * @state: channel state machine + */ +struct slim_channel { + int id; + int prrate; + int seg_dist; + enum slim_ch_data_fmt data_fmt; + enum slim_ch_aux_bit_fmt aux_fmt; + enum slim_channel_state state; +}; + +/** + * struct slim_port - SLIMbus port + * + * @id: Port id + * @direction: Port direction, Source or Sink. + * @state: state machine of port. + * @ch: channel associated with this port. + */ +struct slim_port { + int id; + enum slim_port_direction direction; + enum slim_port_state state; + struct slim_channel ch; +}; + +/** + * enum slim_transport_protocol: SLIMbus Transport protocol list from + * Table 47 of SLIMbus 2.0 specs. + * @SLIM_PROTO_ISO: Isochronous Protocol, no flow control as data rate match + * channel rate flow control embedded in the data. + * @SLIM_PROTO_PUSH: Pushed Protocol, includes flow control, Used to carry + * data whose rate is equal to, or lower than the channel rate. + * @SLIM_PROTO_PULL: Pulled Protocol, similar usage as pushed protocol + * but pull is a unicast. + * @SLIM_PROTO_LOCKED: Locked Protocol + * @SLIM_PROTO_ASYNC_SMPLX: Asynchronous Protocol-Simplex + * @SLIM_PROTO_ASYNC_HALF_DUP: Asynchronous Protocol-Half-duplex + * @SLIM_PROTO_EXT_SMPLX: Extended Asynchronous Protocol-Simplex + * @SLIM_PROTO_EXT_HALF_DUP: Extended Asynchronous Protocol-Half-duplex + */ +enum slim_transport_protocol { + SLIM_PROTO_ISO = 0, + SLIM_PROTO_PUSH, + SLIM_PROTO_PULL, + SLIM_PROTO_LOCKED, + SLIM_PROTO_ASYNC_SMPLX, + SLIM_PROTO_ASYNC_HALF_DUP, + SLIM_PROTO_EXT_SMPLX, + SLIM_PROTO_EXT_HALF_DUP, +}; + +/** + * struct slim_stream_runtime - SLIMbus stream runtime instance + * + * @dev: Name of the stream + * @dev: SLIM Device instance associated with this stream + * @state: state of stream + * @direction: direction of stream + * @prot: Transport protocol used in this stream + * @rate: Data rate of samples * + * @bps: bits per sample + * @ratem: rate multipler which is super frame rate/data rate + * @num_ports: number of ports + * @ports: pointer to instance of ports + * @node: list head for stream associated with slim device. + */ +struct slim_stream_runtime { + const char *name; + struct slim_device *dev; + int direction; + enum slim_transport_protocol prot; + unsigned int rate; + unsigned int bps; + unsigned int ratem; + int num_ports; + struct slim_port *ports; + struct list_head node; +}; + +/** * struct slim_controller - Controls every instance of SLIMbus * (similar to 'master' on SPI) * @dev: Device interface to this driver @@ -196,6 +379,10 @@ struct slim_sched { * @wakeup: This function pointer implements controller-specific procedure * to wake it up from clock-pause. Framework will call this to bring * the controller out of clock pause. + * @enable_stream: This function pointer implements controller-specific procedure + * to enable a stream. + * @disable_stream: This function pointer implements controller-specific procedure + * to disable stream. * * 'Manager device' is responsible for device management, bandwidth * allocation, channel setup, and port associations per channel. @@ -237,6 +424,8 @@ struct slim_controller { struct slim_eaddr *ea, u8 laddr); int (*get_laddr)(struct slim_controller *ctrl, struct slim_eaddr *ea, u8 *laddr); + int (*enable_stream)(struct slim_stream_runtime *rt); + int (*disable_stream)(struct slim_stream_runtime *rt); int (*wakeup)(struct slim_controller *ctrl); }; diff --git a/drivers/slimbus/stream.c b/drivers/slimbus/stream.c new file mode 100644 index 000000000000..2fa05324ed07 --- /dev/null +++ b/drivers/slimbus/stream.c @@ -0,0 +1,477 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2018, Linaro Limited + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/list.h> +#include <linux/slimbus.h> +#include <uapi/sound/asound.h> +#include "slimbus.h" + +/** + * struct segdist_code - Segment Distributions code from + * Table 20 of SLIMbus Specs Version 2.0 + * + * @ratem: Channel Rate Multipler(Segments per Superframe) + * @seg_interval: Number of slots between the first Slot of Segment + * and the first slot of the next consecutive Segment. + * @segdist_code: Segment Distribution Code SD[11:0] + * @seg_offset_mask: Segment offset mask in SD[11:0] + * @segdist_codes: List of all possible Segmet Distribution codes. + */ +static const struct segdist_code { + int ratem; + int seg_interval; + int segdist_code; + u32 seg_offset_mask; + +} segdist_codes[] = { + {1, 1536, 0x200, 0xdff}, + {2, 768, 0x100, 0xcff}, + {4, 384, 0x080, 0xc7f}, + {8, 192, 0x040, 0xc3f}, + {16, 96, 0x020, 0xc1f}, + {32, 48, 0x010, 0xc0f}, + {64, 24, 0x008, 0xc07}, + {128, 12, 0x004, 0xc03}, + {256, 6, 0x002, 0xc01}, + {512, 3, 0x001, 0xc00}, + {3, 512, 0xe00, 0x1ff}, + {6, 256, 0xd00, 0x0ff}, + {12, 128, 0xc80, 0x07f}, + {24, 64, 0xc40, 0x03f}, + {48, 32, 0xc20, 0x01f}, + {96, 16, 0xc10, 0x00f}, + {192, 8, 0xc08, 0x007}, + {364, 4, 0xc04, 0x003}, + {768, 2, 0xc02, 0x001}, +}; + +/* + * Presence Rate table for all Natural Frequencies + * The Presence rate of a constant bitrate stream is mean flow rate of the + * stream expressed in occupied Segments of that Data Channel per second. + * Table 66 from SLIMbus 2.0 Specs + * + * Index of the table corresponds to Presence rate code for the respective rate + * in the table. + */ +static const int slim_presence_rate_table[] = { + 0, /* Not Indicated */ + 12000, + 24000, + 48000, + 96000, + 192000, + 384000, + 768000, + 0, /* Reserved */ + 110250, + 220500, + 441000, + 882000, + 176400, + 352800, + 705600, + 4000, + 8000, + 16000, + 32000, + 64000, + 128000, + 256000, + 512000, +}; + +/* + * slim_stream_allocate() - Allocate a new SLIMbus Stream + * @dev:Slim device to be associated with + * @name: name of the stream + * + * This is very first call for SLIMbus streaming, this API will allocate + * a new SLIMbus stream and return a valid stream runtime pointer for client + * to use it in subsequent stream apis. state of stream is set to ALLOCATED + * + * Return: valid pointer on success and error code on failure. + * From ASoC DPCM framework, this state is linked to startup() operation. + */ +struct slim_stream_runtime *slim_stream_allocate(struct slim_device *dev, + const char *name) +{ + struct slim_stream_runtime *rt; + + rt = kzalloc(sizeof(*rt), GFP_KERNEL); + if (!rt) + return ERR_PTR(-ENOMEM); + + rt->name = kasprintf(GFP_KERNEL, "slim-%s", name); + if (!rt->name) { + kfree(rt); + return ERR_PTR(-ENOMEM); + } + + rt->dev = dev; + spin_lock(&dev->stream_list_lock); + list_add_tail(&rt->node, &dev->stream_list); + spin_unlock(&dev->stream_list_lock); + + return rt; +} +EXPORT_SYMBOL_GPL(slim_stream_allocate); + +static int slim_connect_port_channel(struct slim_stream_runtime *stream, + struct slim_port *port) +{ + struct slim_device *sdev = stream->dev; + u8 wbuf[2]; + struct slim_val_inf msg = {0, 2, NULL, wbuf, NULL}; + u8 mc = SLIM_MSG_MC_CONNECT_SOURCE; + DEFINE_SLIM_LDEST_TXN(txn, mc, 6, stream->dev->laddr, &msg); + + if (port->direction == SLIM_PORT_SINK) + txn.mc = SLIM_MSG_MC_CONNECT_SINK; + + wbuf[0] = port->id; + wbuf[1] = port->ch.id; + port->ch.state = SLIM_CH_STATE_ASSOCIATED; + port->state = SLIM_PORT_UNCONFIGURED; + + return slim_do_transfer(sdev->ctrl, &txn); +} + +static int slim_disconnect_port(struct slim_stream_runtime *stream, + struct slim_port *port) +{ + struct slim_device *sdev = stream->dev; + u8 wbuf[1]; + struct slim_val_inf msg = {0, 1, NULL, wbuf, NULL}; + u8 mc = SLIM_MSG_MC_DISCONNECT_PORT; + DEFINE_SLIM_LDEST_TXN(txn, mc, 5, stream->dev->laddr, &msg); + + wbuf[0] = port->id; + port->ch.state = SLIM_CH_STATE_DISCONNECTED; + port->state = SLIM_PORT_DISCONNECTED; + + return slim_do_transfer(sdev->ctrl, &txn); +} + +static int slim_deactivate_remove_channel(struct slim_stream_runtime *stream, + struct slim_port *port) +{ + struct slim_device *sdev = stream->dev; + u8 wbuf[1]; + struct slim_val_inf msg = {0, 1, NULL, wbuf, NULL}; + u8 mc = SLIM_MSG_MC_NEXT_DEACTIVATE_CHANNEL; + DEFINE_SLIM_LDEST_TXN(txn, mc, 5, stream->dev->laddr, &msg); + int ret; + + wbuf[0] = port->ch.id; + ret = slim_do_transfer(sdev->ctrl, &txn); + if (ret) + return ret; + + txn.mc = SLIM_MSG_MC_NEXT_REMOVE_CHANNEL; + port->ch.state = SLIM_CH_STATE_REMOVED; + + return slim_do_transfer(sdev->ctrl, &txn); +} + +static int slim_get_prate_code(int rate) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(slim_presence_rate_table); i++) { + if (rate == slim_presence_rate_table[i]) + return i; + } + + return -EINVAL; +} + +/* + * slim_stream_prepare() - Prepare a SLIMbus Stream + * + * @rt: instance of slim stream runtime to configure + * @cfg: new configuration for the stream + * + * This API will configure SLIMbus stream with config parameters from cfg. + * return zero on success and error code on failure. From ASoC DPCM framework, + * this state is linked to hw_params() operation. + */ +int slim_stream_prepare(struct slim_stream_runtime *rt, + struct slim_stream_config *cfg) +{ + struct slim_controller *ctrl = rt->dev->ctrl; + struct slim_port *port; + int num_ports, i, port_id; + + if (rt->ports) { + dev_err(&rt->dev->dev, "Stream already Prepared\n"); + return -EINVAL; + } + + num_ports = hweight32(cfg->port_mask); + rt->ports = kcalloc(num_ports, sizeof(*port), GFP_KERNEL); + if (!rt->ports) + return -ENOMEM; + + rt->num_ports = num_ports; + rt->rate = cfg->rate; + rt->bps = cfg->bps; + rt->direction = cfg->direction; + + if (cfg->rate % ctrl->a_framer->superfreq) { + /* + * data rate not exactly multiple of super frame, + * use PUSH/PULL protocol + */ + if (cfg->direction == SNDRV_PCM_STREAM_PLAYBACK) + rt->prot = SLIM_PROTO_PUSH; + else + rt->prot = SLIM_PROTO_PULL; + } else { + rt->prot = SLIM_PROTO_ISO; + } + + rt->ratem = cfg->rate/ctrl->a_framer->superfreq; + + i = 0; + for_each_set_bit(port_id, &cfg->port_mask, SLIM_DEVICE_MAX_PORTS) { + port = &rt->ports[i]; + port->state = SLIM_PORT_DISCONNECTED; + port->id = port_id; + port->ch.prrate = slim_get_prate_code(cfg->rate); + port->ch.id = cfg->chs[i]; + port->ch.data_fmt = SLIM_CH_DATA_FMT_NOT_DEFINED; + port->ch.aux_fmt = SLIM_CH_AUX_FMT_NOT_APPLICABLE; + port->ch.state = SLIM_CH_STATE_ALLOCATED; + + if (cfg->direction == SNDRV_PCM_STREAM_PLAYBACK) + port->direction = SLIM_PORT_SINK; + else + port->direction = SLIM_PORT_SOURCE; + + slim_connect_port_channel(rt, port); + i++; + } + + return 0; +} +EXPORT_SYMBOL_GPL(slim_stream_prepare); + +static int slim_define_channel_content(struct slim_stream_runtime *stream, + struct slim_port *port) +{ + struct slim_device *sdev = stream->dev; + u8 wbuf[4]; + struct slim_val_inf msg = {0, 4, NULL, wbuf, NULL}; + u8 mc = SLIM_MSG_MC_NEXT_DEFINE_CONTENT; + DEFINE_SLIM_LDEST_TXN(txn, mc, 8, stream->dev->laddr, &msg); + + wbuf[0] = port->ch.id; + wbuf[1] = port->ch.prrate; + + /* Frequency Locked for ISO Protocol */ + if (stream->prot != SLIM_PROTO_ISO) + wbuf[1] |= SLIM_CHANNEL_CONTENT_FL; + + wbuf[2] = port->ch.data_fmt | (port->ch.aux_fmt << 4); + wbuf[3] = stream->bps/SLIM_SLOT_LEN_BITS; + port->ch.state = SLIM_CH_STATE_CONTENT_DEFINED; + + return slim_do_transfer(sdev->ctrl, &txn); +} + +static int slim_get_segdist_code(int ratem) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(segdist_codes); i++) { + if (segdist_codes[i].ratem == ratem) + return segdist_codes[i].segdist_code; + } + + return -EINVAL; +} + +static int slim_define_channel(struct slim_stream_runtime *stream, + struct slim_port *port) +{ + struct slim_device *sdev = stream->dev; + u8 wbuf[4]; + struct slim_val_inf msg = {0, 4, NULL, wbuf, NULL}; + u8 mc = SLIM_MSG_MC_NEXT_DEFINE_CHANNEL; + DEFINE_SLIM_LDEST_TXN(txn, mc, 8, stream->dev->laddr, &msg); + + port->ch.seg_dist = slim_get_segdist_code(stream->ratem); + + wbuf[0] = port->ch.id; + wbuf[1] = port->ch.seg_dist & 0xFF; + wbuf[2] = (stream->prot << 4) | ((port->ch.seg_dist & 0xF00) >> 8); + if (stream->prot == SLIM_PROTO_ISO) + wbuf[3] = stream->bps/SLIM_SLOT_LEN_BITS; + else + wbuf[3] = stream->bps/SLIM_SLOT_LEN_BITS + 1; + + port->ch.state = SLIM_CH_STATE_DEFINED; + + return slim_do_transfer(sdev->ctrl, &txn); +} + +static int slim_activate_channel(struct slim_stream_runtime *stream, + struct slim_port *port) +{ + struct slim_device *sdev = stream->dev; + u8 wbuf[1]; + struct slim_val_inf msg = {0, 1, NULL, wbuf, NULL}; + u8 mc = SLIM_MSG_MC_NEXT_ACTIVATE_CHANNEL; + DEFINE_SLIM_LDEST_TXN(txn, mc, 5, stream->dev->laddr, &msg); + + txn.msg->num_bytes = 1; + txn.msg->wbuf = wbuf; + wbuf[0] = port->ch.id; + port->ch.state = SLIM_CH_STATE_ACTIVE; + + return slim_do_transfer(sdev->ctrl, &txn); +} + +/* + * slim_stream_enable() - Enable a prepared SLIMbus Stream + * + * @stream: instance of slim stream runtime to enable + * + * This API will enable all the ports and channels associated with + * SLIMbus stream + * + * Return: zero on success and error code on failure. From ASoC DPCM framework, + * this state is linked to trigger() start operation. + */ +int slim_stream_enable(struct slim_stream_runtime *stream) +{ + DEFINE_SLIM_BCAST_TXN(txn, SLIM_MSG_MC_BEGIN_RECONFIGURATION, + 3, SLIM_LA_MANAGER, NULL); + struct slim_controller *ctrl = stream->dev->ctrl; + int ret, i; + + if (ctrl->enable_stream) { + ret = ctrl->enable_stream(stream); + if (ret) + return ret; + + for (i = 0; i < stream->num_ports; i++) + stream->ports[i].ch.state = SLIM_CH_STATE_ACTIVE; + + return ret; + } + + ret = slim_do_transfer(ctrl, &txn); + if (ret) + return ret; + + /* define channels first before activating them */ + for (i = 0; i < stream->num_ports; i++) { + struct slim_port *port = &stream->ports[i]; + + slim_define_channel(stream, port); + slim_define_channel_content(stream, port); + } + + for (i = 0; i < stream->num_ports; i++) { + struct slim_port *port = &stream->ports[i]; + + slim_activate_channel(stream, port); + port->state = SLIM_PORT_CONFIGURED; + } + txn.mc = SLIM_MSG_MC_RECONFIGURE_NOW; + + return slim_do_transfer(ctrl, &txn); +} +EXPORT_SYMBOL_GPL(slim_stream_enable); + +/* + * slim_stream_disable() - Disable a SLIMbus Stream + * + * @stream: instance of slim stream runtime to disable + * + * This API will disable all the ports and channels associated with + * SLIMbus stream + * + * Return: zero on success and error code on failure. From ASoC DPCM framework, + * this state is linked to trigger() pause operation. + */ +int slim_stream_disable(struct slim_stream_runtime *stream) +{ + DEFINE_SLIM_BCAST_TXN(txn, SLIM_MSG_MC_BEGIN_RECONFIGURATION, + 3, SLIM_LA_MANAGER, NULL); + struct slim_controller *ctrl = stream->dev->ctrl; + int ret, i; + + if (ctrl->disable_stream) + ctrl->disable_stream(stream); + + ret = slim_do_transfer(ctrl, &txn); + if (ret) + return ret; + + for (i = 0; i < stream->num_ports; i++) + slim_deactivate_remove_channel(stream, &stream->ports[i]); + + txn.mc = SLIM_MSG_MC_RECONFIGURE_NOW; + + return slim_do_transfer(ctrl, &txn); +} +EXPORT_SYMBOL_GPL(slim_stream_disable); + +/* + * slim_stream_unprepare() - Un-prepare a SLIMbus Stream + * + * @stream: instance of slim stream runtime to unprepare + * + * This API will un allocate all the ports and channels associated with + * SLIMbus stream + * + * Return: zero on success and error code on failure. From ASoC DPCM framework, + * this state is linked to trigger() stop operation. + */ +int slim_stream_unprepare(struct slim_stream_runtime *stream) +{ + int i; + + for (i = 0; i < stream->num_ports; i++) + slim_disconnect_port(stream, &stream->ports[i]); + + kfree(stream->ports); + stream->ports = NULL; + stream->num_ports = 0; + + return 0; +} +EXPORT_SYMBOL_GPL(slim_stream_unprepare); + +/* + * slim_stream_free() - Free a SLIMbus Stream + * + * @stream: instance of slim stream runtime to free + * + * This API will un allocate all the memory associated with + * slim stream runtime, user is not allowed to make an dereference + * to stream after this call. + * + * Return: zero on success and error code on failure. From ASoC DPCM framework, + * this state is linked to shutdown() operation. + */ +int slim_stream_free(struct slim_stream_runtime *stream) +{ + struct slim_device *sdev = stream->dev; + + spin_lock(&sdev->stream_list_lock); + list_del(&stream->node); + spin_unlock(&sdev->stream_list_lock); + + kfree(stream->name); + kfree(stream); + + return 0; +} +EXPORT_SYMBOL_GPL(slim_stream_free); |