summaryrefslogtreecommitdiff
path: root/drivers/serial
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/serial')
-rw-r--r--drivers/serial/Kconfig48
-rw-r--r--drivers/serial/amba-pl010.c4
-rw-r--r--drivers/serial/bfin_5xx.c201
-rw-r--r--drivers/serial/jsm/jsm_driver.c2
-rw-r--r--drivers/serial/mpsc.c3
-rw-r--r--drivers/serial/serial_cs.c4
-rw-r--r--drivers/serial/vr41xx_siu.c143
7 files changed, 277 insertions, 128 deletions
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 315ea9916456..2adbed4e10f3 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -556,7 +556,7 @@ choice
config SERIAL_BFIN_DMA
bool "DMA mode"
- depends on DMA_UNCACHED_1M
+ depends on DMA_UNCACHED_1M && !KGDB_UART
help
This driver works under DMA mode. If this option is selected, the
blackfin simple dma driver is also enabled.
@@ -599,7 +599,7 @@ config UART0_RTS_PIN
config SERIAL_BFIN_UART1
bool "Enable UART1"
- depends on SERIAL_BFIN && (BF534 || BF536 || BF537)
+ depends on SERIAL_BFIN && (BF534 || BF536 || BF537 || BF54x)
help
Enable UART1
@@ -612,18 +612,58 @@ config BFIN_UART1_CTSRTS
config UART1_CTS_PIN
int "UART1 CTS pin"
- depends on BFIN_UART1_CTSRTS
+ depends on BFIN_UART1_CTSRTS && (BF53x || BF561)
default -1
help
Refer to ./include/asm-blackfin/gpio.h to see the GPIO map.
config UART1_RTS_PIN
int "UART1 RTS pin"
- depends on BFIN_UART1_CTSRTS
+ depends on BFIN_UART1_CTSRTS && (BF53x || BF561)
default -1
help
Refer to ./include/asm-blackfin/gpio.h to see the GPIO map.
+config SERIAL_BFIN_UART2
+ bool "Enable UART2"
+ depends on SERIAL_BFIN && (BF54x)
+ help
+ Enable UART2
+
+config BFIN_UART2_CTSRTS
+ bool "Enable UART2 hardware flow control"
+ depends on SERIAL_BFIN_UART2
+ help
+ Enable hardware flow control in the driver. Using GPIO emulate the CTS/RTS
+ signal.
+
+config UART2_CTS_PIN
+ int "UART2 CTS pin"
+ depends on BFIN_UART2_CTSRTS
+ default -1
+ help
+ Refer to ./include/asm-blackfin/gpio.h to see the GPIO map.
+
+config UART2_RTS_PIN
+ int "UART2 RTS pin"
+ depends on BFIN_UART2_CTSRTS
+ default -1
+ help
+ Refer to ./include/asm-blackfin/gpio.h to see the GPIO map.
+
+config SERIAL_BFIN_UART3
+ bool "Enable UART3"
+ depends on SERIAL_BFIN && (BF54x)
+ help
+ Enable UART3
+
+config BFIN_UART3_CTSRTS
+ bool "Enable UART3 hardware flow control"
+ depends on SERIAL_BFIN_UART3
+ help
+ Enable hardware flow control in the driver. Using GPIO emulate the CTS/RTS
+ signal.
+
config SERIAL_IMX
bool "IMX serial port support"
depends on ARM && ARCH_IMX
diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c
index 00d1255e4c12..e88da72f8304 100644
--- a/drivers/serial/amba-pl010.c
+++ b/drivers/serial/amba-pl010.c
@@ -167,9 +167,9 @@ static void pl010_rx_chars(struct uart_amba_port *uap)
ignore_char:
status = readb(uap->port.membase + UART01x_FR);
}
- spin_unlock(&port->lock);
+ spin_unlock(&uap->port.lock);
tty_flip_buffer_push(tty);
- spin_lock(&port->lock);
+ spin_lock(&uap->port.lock);
}
static void pl010_tx_chars(struct uart_amba_port *uap)
diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index 787dc7168f3e..66c92bc36f3d 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -41,6 +41,11 @@
#include <linux/tty_flip.h>
#include <linux/serial_core.h>
+#ifdef CONFIG_KGDB_UART
+#include <linux/kgdb.h>
+#include <asm/irq_regs.h>
+#endif
+
#include <asm/gpio.h>
#include <asm/mach/bfin_serial_5xx.h>
@@ -81,15 +86,29 @@ static void bfin_serial_stop_tx(struct uart_port *port)
{
struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
+#ifdef CONFIG_BF54x
+ while (!(UART_GET_LSR(uart) & TEMT))
+ continue;
+#endif
+
#ifdef CONFIG_SERIAL_BFIN_DMA
disable_dma(uart->tx_dma_channel);
#else
+#ifdef CONFIG_BF54x
+ /* Waiting for Transmission Finished */
+ while (!(UART_GET_LSR(uart) & TFI))
+ continue;
+ /* Clear TFI bit */
+ UART_PUT_LSR(uart, TFI);
+ UART_CLEAR_IER(uart, ETBEI);
+#else
unsigned short ier;
ier = UART_GET_IER(uart);
ier &= ~ETBEI;
UART_PUT_IER(uart, ier);
#endif
+#endif
}
/*
@@ -102,12 +121,16 @@ static void bfin_serial_start_tx(struct uart_port *port)
#ifdef CONFIG_SERIAL_BFIN_DMA
bfin_serial_dma_tx_chars(uart);
#else
+#ifdef CONFIG_BF54x
+ UART_SET_IER(uart, ETBEI);
+#else
unsigned short ier;
ier = UART_GET_IER(uart);
ier |= ETBEI;
UART_PUT_IER(uart, ier);
bfin_serial_tx_chars(uart);
#endif
+#endif
}
/*
@@ -116,11 +139,18 @@ static void bfin_serial_start_tx(struct uart_port *port)
static void bfin_serial_stop_rx(struct uart_port *port)
{
struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
+#ifdef CONFIG_BF54x
+ UART_CLEAR_IER(uart, ERBFI);
+#else
unsigned short ier;
ier = UART_GET_IER(uart);
+#ifdef CONFIG_KGDB_UART
+ if (uart->port.line != CONFIG_KGDB_UART_PORT)
+#endif
ier &= ~ERBFI;
UART_PUT_IER(uart, ier);
+#endif
}
/*
@@ -130,6 +160,49 @@ static void bfin_serial_enable_ms(struct uart_port *port)
{
}
+#ifdef CONFIG_KGDB_UART
+static int kgdb_entry_state;
+
+void kgdb_put_debug_char(int chr)
+{
+ struct bfin_serial_port *uart;
+
+ if (CONFIG_KGDB_UART_PORT<0 || CONFIG_KGDB_UART_PORT>=NR_PORTS)
+ uart = &bfin_serial_ports[0];
+ else
+ uart = &bfin_serial_ports[CONFIG_KGDB_UART_PORT];
+
+ while (!(UART_GET_LSR(uart) & THRE)) {
+ __builtin_bfin_ssync();
+ }
+ UART_PUT_LCR(uart, UART_GET_LCR(uart)&(~DLAB));
+ __builtin_bfin_ssync();
+ UART_PUT_CHAR(uart, (unsigned char)chr);
+ __builtin_bfin_ssync();
+}
+
+int kgdb_get_debug_char(void)
+{
+ struct bfin_serial_port *uart;
+ unsigned char chr;
+
+ if (CONFIG_KGDB_UART_PORT<0 || CONFIG_KGDB_UART_PORT>=NR_PORTS)
+ uart = &bfin_serial_ports[0];
+ else
+ uart = &bfin_serial_ports[CONFIG_KGDB_UART_PORT];
+
+ while(!(UART_GET_LSR(uart) & DR)) {
+ __builtin_bfin_ssync();
+ }
+ UART_PUT_LCR(uart, UART_GET_LCR(uart)&(~DLAB));
+ __builtin_bfin_ssync();
+ chr = UART_GET_CHAR(uart);
+ __builtin_bfin_ssync();
+
+ return chr;
+}
+#endif
+
#ifdef CONFIG_SERIAL_BFIN_PIO
static void local_put_char(struct bfin_serial_port *uart, char ch)
{
@@ -152,6 +225,9 @@ static void bfin_serial_rx_chars(struct bfin_serial_port *uart)
{
struct tty_struct *tty = uart->port.info->tty;
unsigned int status, ch, flg;
+#ifdef CONFIG_KGDB_UART
+ struct pt_regs *regs = get_irq_regs();
+#endif
#ifdef BF533_FAMILY
static int in_break = 0;
#endif
@@ -160,6 +236,27 @@ static void bfin_serial_rx_chars(struct bfin_serial_port *uart)
ch = UART_GET_CHAR(uart);
uart->port.icount.rx++;
+#ifdef CONFIG_KGDB_UART
+ if (uart->port.line == CONFIG_KGDB_UART_PORT) {
+ if (uart->port.cons->index == CONFIG_KGDB_UART_PORT && ch == 0x1) { /* Ctrl + A */
+ kgdb_breakkey_pressed(regs);
+ return;
+ } else if (kgdb_entry_state == 0 && ch == '$') {/* connection from KGDB */
+ kgdb_entry_state = 1;
+ } else if (kgdb_entry_state == 1 && ch == 'q') {
+ kgdb_entry_state = 0;
+ kgdb_breakkey_pressed(regs);
+ return;
+ } else if (ch == 0x3) {/* Ctrl + C */
+ kgdb_entry_state = 0;
+ kgdb_breakkey_pressed(regs);
+ return;
+ } else {
+ kgdb_entry_state = 0;
+ }
+ }
+#endif
+
#ifdef BF533_FAMILY
/* The BF533 family of processors have a nice misbehavior where
* they continuously generate characters for a "single" break.
@@ -185,6 +282,7 @@ static void bfin_serial_rx_chars(struct bfin_serial_port *uart)
uart->port.icount.brk++;
if (uart_handle_break(&uart->port))
goto ignore_char;
+ status &= ~(PE | FE);
}
if (status & PE)
uart->port.icount.parity++;
@@ -249,10 +347,21 @@ static irqreturn_t bfin_serial_rx_int(int irq, void *dev_id)
{
struct bfin_serial_port *uart = dev_id;
+#ifdef CONFIG_BF54x
+ unsigned short status;
+ spin_lock(&uart->port.lock);
+ status = UART_GET_LSR(uart);
+ while ((UART_GET_IER(uart) & ERBFI) && (status & DR)) {
+ bfin_serial_rx_chars(uart);
+ status = UART_GET_LSR(uart);
+ }
+ spin_unlock(&uart->port.lock);
+#else
spin_lock(&uart->port.lock);
while ((UART_GET_IIR(uart) & IIR_STATUS) == IIR_RX_READY)
bfin_serial_rx_chars(uart);
spin_unlock(&uart->port.lock);
+#endif
return IRQ_HANDLED;
}
@@ -260,10 +369,21 @@ static irqreturn_t bfin_serial_tx_int(int irq, void *dev_id)
{
struct bfin_serial_port *uart = dev_id;
+#ifdef CONFIG_BF54x
+ unsigned short status;
+ spin_lock(&uart->port.lock);
+ status = UART_GET_LSR(uart);
+ while ((UART_GET_IER(uart) & ETBEI) && (status & THRE)) {
+ bfin_serial_tx_chars(uart);
+ status = UART_GET_LSR(uart);
+ }
+ spin_unlock(&uart->port.lock);
+#else
spin_lock(&uart->port.lock);
while ((UART_GET_IIR(uart) & IIR_STATUS) == IIR_TX_READY)
bfin_serial_tx_chars(uart);
spin_unlock(&uart->port.lock);
+#endif
return IRQ_HANDLED;
}
@@ -274,7 +394,6 @@ static void bfin_serial_do_work(struct work_struct *work)
bfin_serial_mctrl_check(uart);
}
-
#endif
#ifdef CONFIG_SERIAL_BFIN_DMA
@@ -323,9 +442,13 @@ static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart)
set_dma_x_count(uart->tx_dma_channel, uart->tx_count);
set_dma_x_modify(uart->tx_dma_channel, 1);
enable_dma(uart->tx_dma_channel);
+#ifdef CONFIG_BF54x
+ UART_SET_IER(uart, ETBEI);
+#else
ier = UART_GET_IER(uart);
ier |= ETBEI;
UART_PUT_IER(uart, ier);
+#endif
spin_unlock_irqrestore(&uart->port.lock, flags);
}
@@ -341,6 +464,7 @@ static void bfin_serial_dma_rx_chars(struct bfin_serial_port *uart)
uart->port.icount.brk++;
if (uart_handle_break(&uart->port))
goto dma_ignore_char;
+ status &= ~(PE | FE);
}
if (status & PE)
uart->port.icount.parity++;
@@ -404,9 +528,13 @@ static irqreturn_t bfin_serial_dma_tx_int(int irq, void *dev_id)
if (!(get_dma_curr_irqstat(uart->tx_dma_channel)&DMA_RUN)) {
clear_dma_irqstat(uart->tx_dma_channel);
disable_dma(uart->tx_dma_channel);
+#ifdef CONFIG_BF54x
+ UART_CLEAR_IER(uart, ETBEI);
+#else
ier = UART_GET_IER(uart);
ier &= ~ETBEI;
UART_PUT_IER(uart, ier);
+#endif
xmit->tail = (xmit->tail+uart->tx_count) &(UART_XMIT_SIZE -1);
uart->port.icount.tx+=uart->tx_count;
@@ -517,6 +645,14 @@ static void bfin_serial_mctrl_check(struct bfin_serial_port *uart)
*/
static void bfin_serial_break_ctl(struct uart_port *port, int break_state)
{
+ struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
+ u16 lcr = UART_GET_LCR(uart);
+ if (break_state)
+ lcr |= SB;
+ else
+ lcr &= ~SB;
+ UART_PUT_LCR(uart, lcr);
+ SSYNC();
}
static int bfin_serial_startup(struct uart_port *port)
@@ -561,7 +697,11 @@ static int bfin_serial_startup(struct uart_port *port)
uart->rx_dma_timer.expires = jiffies + DMA_RX_FLUSH_JIFFIES;
add_timer(&(uart->rx_dma_timer));
#else
+# ifdef CONFIG_KGDB_UART
+ if (uart->port.line != CONFIG_KGDB_UART_PORT && request_irq
+# else
if (request_irq
+# endif
(uart->port.irq, bfin_serial_rx_int, IRQF_DISABLED,
"BFIN_UART_RX", uart)) {
printk(KERN_NOTICE "Unable to attach BlackFin UART RX interrupt\n");
@@ -576,7 +716,11 @@ static int bfin_serial_startup(struct uart_port *port)
return -EBUSY;
}
#endif
+#ifdef CONFIG_BF54x
+ UART_SET_IER(uart, ERBFI);
+#else
UART_PUT_IER(uart, UART_GET_IER(uart) | ERBFI);
+#endif
return 0;
}
@@ -591,6 +735,9 @@ static void bfin_serial_shutdown(struct uart_port *port)
free_dma(uart->rx_dma_channel);
del_timer(&(uart->rx_dma_timer));
#else
+#ifdef CONFIG_KGDB_UART
+ if (uart->port.line != CONFIG_KGDB_UART_PORT)
+#endif
free_irq(uart->port.irq, uart);
free_irq(uart->port.irq+1, uart);
#endif
@@ -625,11 +772,12 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios,
if (termios->c_cflag & CSTOPB)
lcr |= STB;
- if (termios->c_cflag & PARENB) {
+ if (termios->c_cflag & PARENB)
lcr |= PEN;
- if (!(termios->c_cflag & PARODD))
- lcr |= EPS;
- }
+ if (!(termios->c_cflag & PARODD))
+ lcr |= EPS;
+ if (termios->c_cflag & CMSPAR)
+ lcr |= STP;
port->read_status_mask = OE;
if (termios->c_iflag & INPCK)
@@ -663,29 +811,41 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios,
/* Disable UART */
ier = UART_GET_IER(uart);
+#ifdef CONFIG_BF54x
+ UART_CLEAR_IER(uart, 0xF);
+#else
UART_PUT_IER(uart, 0);
+#endif
+#ifndef CONFIG_BF54x
/* Set DLAB in LCR to Access DLL and DLH */
val = UART_GET_LCR(uart);
val |= DLAB;
UART_PUT_LCR(uart, val);
SSYNC();
+#endif
UART_PUT_DLL(uart, quot & 0xFF);
SSYNC();
UART_PUT_DLH(uart, (quot >> 8) & 0xFF);
SSYNC();
+#ifndef CONFIG_BF54x
/* Clear DLAB in LCR to Access THR RBR IER */
val = UART_GET_LCR(uart);
val &= ~DLAB;
UART_PUT_LCR(uart, val);
SSYNC();
+#endif
UART_PUT_LCR(uart, lcr);
/* Enable UART */
+#ifdef CONFIG_BF54x
+ UART_SET_IER(uart, ier);
+#else
UART_PUT_IER(uart, ier);
+#endif
val = UART_GET_GCTL(uart);
val |= UCEN;
@@ -797,15 +957,15 @@ static void __init bfin_serial_init_ports(void)
bfin_serial_resource[i].uart_rts_pin;
#endif
bfin_serial_hw_init(&bfin_serial_ports[i]);
-
}
+
}
#ifdef CONFIG_SERIAL_BFIN_CONSOLE
static void bfin_serial_console_putchar(struct uart_port *port, int ch)
{
struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
- while (!(UART_GET_LSR(uart)))
+ while (!(UART_GET_LSR(uart) & THRE))
barrier();
UART_PUT_CHAR(uart, ch);
SSYNC();
@@ -857,18 +1017,22 @@ bfin_serial_console_get_options(struct bfin_serial_port *uart, int *baud,
case 2: *bits = 7; break;
case 3: *bits = 8; break;
}
+#ifndef CONFIG_BF54x
/* Set DLAB in LCR to Access DLL and DLH */
val = UART_GET_LCR(uart);
val |= DLAB;
UART_PUT_LCR(uart, val);
+#endif
dll = UART_GET_DLL(uart);
dlh = UART_GET_DLH(uart);
+#ifndef CONFIG_BF54x
/* Clear DLAB in LCR to Access THR RBR IER */
val = UART_GET_LCR(uart);
val &= ~DLAB;
UART_PUT_LCR(uart, val);
+#endif
*baud = get_sclk() / (16*(dll | dlh << 8));
}
@@ -920,6 +1084,10 @@ static int __init bfin_serial_rs_console_init(void)
{
bfin_serial_init_ports();
register_console(&bfin_serial_console);
+#ifdef CONFIG_KGDB_UART
+ kgdb_entry_state = 0;
+ init_kgdb_uart();
+#endif
return 0;
}
console_initcall(bfin_serial_rs_console_init);
@@ -1012,6 +1180,10 @@ static struct platform_driver bfin_serial_driver = {
static int __init bfin_serial_init(void)
{
int ret;
+#ifdef CONFIG_KGDB_UART
+ struct bfin_serial_port *uart = &bfin_serial_ports[CONFIG_KGDB_UART_PORT];
+ struct termios t;
+#endif
pr_info("Serial: Blackfin serial driver\n");
@@ -1025,6 +1197,21 @@ static int __init bfin_serial_init(void)
uart_unregister_driver(&bfin_serial_reg);
}
}
+#ifdef CONFIG_KGDB_UART
+ if (uart->port.cons->index != CONFIG_KGDB_UART_PORT) {
+ request_irq(uart->port.irq, bfin_serial_int,
+ IRQF_DISABLED, "BFIN_UART_RX", uart);
+ pr_info("Request irq for kgdb uart port\n");
+ UART_PUT_IER(uart, UART_GET_IER(uart) | ERBFI);
+ __builtin_bfin_ssync();
+ t.c_cflag = CS8|B57600;
+ t.c_iflag = 0;
+ t.c_oflag = 0;
+ t.c_lflag = ICANON;
+ t.c_line = CONFIG_KGDB_UART_PORT;
+ bfin_serial_set_termios(&uart->port, &t, &t);
+ }
+#endif
return ret;
}
diff --git a/drivers/serial/jsm/jsm_driver.c b/drivers/serial/jsm/jsm_driver.c
index 81792e6eeb2d..6767ee381cd1 100644
--- a/drivers/serial/jsm/jsm_driver.c
+++ b/drivers/serial/jsm/jsm_driver.c
@@ -88,7 +88,7 @@ static int jsm_probe_one(struct pci_dev *pdev, const struct pci_device_id *ent)
spin_lock_init(&brd->bd_intr_lock);
/* store which revision we have */
- pci_read_config_byte(pdev, PCI_REVISION_ID, &brd->rev);
+ brd->rev = pdev->revision;
brd->irq = pdev->irq;
diff --git a/drivers/serial/mpsc.c b/drivers/serial/mpsc.c
index d09f2097d5b0..00924feaf621 100644
--- a/drivers/serial/mpsc.c
+++ b/drivers/serial/mpsc.c
@@ -503,7 +503,8 @@ mpsc_sdma_intr_ack(struct mpsc_port_info *pi)
if (pi->mirror_regs)
pi->shared_regs->SDMA_INTR_CAUSE_m = 0;
- writel(0, pi->shared_regs->sdma_intr_base + SDMA_INTR_CAUSE);
+ writeb(0x00, pi->shared_regs->sdma_intr_base + SDMA_INTR_CAUSE +
+ pi->port.line);
return;
}
diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index 6b76babc7fbf..a0ea43598515 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -842,12 +842,16 @@ static struct pcmcia_device_id serial_ids[] = {
PCMCIA_PFC_DEVICE_PROD_ID12(1, "Linksys", "EtherFast 10&100 + 56K PC Card (PCMLM56)", 0x0733cc81, 0xb3765033),
PCMCIA_PFC_DEVICE_PROD_ID12(1, "LINKSYS", "PCMLM336", 0xf7cb0b07, 0x7a821b58),
PCMCIA_PFC_DEVICE_PROD_ID12(1, "MEGAHERTZ", "XJEM1144/CCEM1144", 0xf510db04, 0x52d21e1e),
+ PCMCIA_PFC_DEVICE_PROD_ID12(1, "MICRO RESEARCH", "COMBO-L/M-336", 0xb2ced065, 0x3ced0555),
+ PCMCIA_PFC_DEVICE_PROD_ID12(1, "NEC", "PK-UG-J001" ,0x18df0ba0 ,0x831b1064),
PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Diamonds Modem+Ethernet", 0xc2f80cd, 0x656947b9),
PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Hearts Modem+Ethernet", 0xc2f80cd, 0xdc9ba5ed),
PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "ComboCard", 0xdcfe12d3, 0xcd8906cc),
PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "LanModem", 0xdcfe12d3, 0xc67c648f),
PCMCIA_PFC_DEVICE_PROD_ID12(1, "TDK", "GlobalNetworker 3410/3412", 0x1eae9475, 0xd9a93bed),
PCMCIA_PFC_DEVICE_PROD_ID12(1, "Xircom", "CreditCard Ethernet+Modem II", 0x2e3ee845, 0xeca401bf),
+ PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0a05),
+ PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x1101),
PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0104, 0x0070),
PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0101, 0x0562),
PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0104, 0x0070),
diff --git a/drivers/serial/vr41xx_siu.c b/drivers/serial/vr41xx_siu.c
index cf0e663b42ed..85309acb75f6 100644
--- a/drivers/serial/vr41xx_siu.c
+++ b/drivers/serial/vr41xx_siu.c
@@ -1,7 +1,7 @@
/*
* Driver for NEC VR4100 series Serial Interface Unit.
*
- * Copyright (C) 2004-2005 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2004-2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
*
* Based on drivers/serial/8250.c, by Russell King.
*
@@ -25,12 +25,12 @@
#endif
#include <linux/console.h>
-#include <linux/platform_device.h>
-#include <linux/err.h>
-#include <linux/ioport.h>
+#include <linux/errno.h>
#include <linux/init.h>
#include <linux/interrupt.h>
+#include <linux/ioport.h>
#include <linux/module.h>
+#include <linux/platform_device.h>
#include <linux/serial.h>
#include <linux/serial_core.h>
#include <linux/serial_reg.h>
@@ -38,11 +38,9 @@
#include <linux/tty_flip.h>
#include <asm/io.h>
-#include <asm/vr41xx/irq.h>
#include <asm/vr41xx/siu.h>
#include <asm/vr41xx/vr41xx.h>
-#define SIU_PORTS_MAX 2
#define SIU_BAUD_BASE 1152000
#define SIU_MAJOR 204
#define SIU_MINOR_BASE 82
@@ -60,32 +58,13 @@
#define IRUSESEL 0x02
#define SIRSEL 0x01
-struct siu_port {
- unsigned int type;
- unsigned int irq;
- unsigned long start;
-};
-
-static const struct siu_port siu_type1_ports[] = {
- { .type = PORT_VR41XX_SIU,
- .irq = SIU_IRQ,
- .start = 0x0c000000UL, },
-};
-
-#define SIU_TYPE1_NR_PORTS (sizeof(siu_type1_ports) / sizeof(struct siu_port))
-
-static const struct siu_port siu_type2_ports[] = {
- { .type = PORT_VR41XX_SIU,
- .irq = SIU_IRQ,
- .start = 0x0f000800UL, },
- { .type = PORT_VR41XX_DSIU,
- .irq = DSIU_IRQ,
- .start = 0x0f000820UL, },
+static struct uart_port siu_uart_ports[SIU_PORTS_MAX] = {
+ [0 ... SIU_PORTS_MAX-1] = {
+ .lock = __SPIN_LOCK_UNLOCKED(siu_uart_ports->lock),
+ .irq = -1,
+ },
};
-#define SIU_TYPE2_NR_PORTS (sizeof(siu_type2_ports) / sizeof(struct siu_port))
-
-static struct uart_port siu_uart_ports[SIU_PORTS_MAX];
static uint8_t lsr_break_flag[SIU_PORTS_MAX];
#define siu_read(port, offset) readb((port)->membase + (offset))
@@ -110,7 +89,6 @@ void vr41xx_select_siu_interface(siu_interface_t interface)
spin_unlock_irqrestore(&port->lock, flags);
}
-
EXPORT_SYMBOL_GPL(vr41xx_select_siu_interface);
void vr41xx_use_irda(irda_use_t use)
@@ -132,7 +110,6 @@ void vr41xx_use_irda(irda_use_t use)
spin_unlock_irqrestore(&port->lock, flags);
}
-
EXPORT_SYMBOL_GPL(vr41xx_use_irda);
void vr41xx_select_irda_module(irda_module_t module, irda_speed_t speed)
@@ -166,7 +143,6 @@ void vr41xx_select_irda_module(irda_module_t module, irda_speed_t speed)
spin_unlock_irqrestore(&port->lock, flags);
}
-
EXPORT_SYMBOL_GPL(vr41xx_select_irda_module);
static inline void siu_clear_fifo(struct uart_port *port)
@@ -177,21 +153,6 @@ static inline void siu_clear_fifo(struct uart_port *port)
siu_write(port, UART_FCR, 0);
}
-static inline int siu_probe_ports(void)
-{
- switch (current_cpu_data.cputype) {
- case CPU_VR4111:
- case CPU_VR4121:
- return SIU_TYPE1_NR_PORTS;
- case CPU_VR4122:
- case CPU_VR4131:
- case CPU_VR4133:
- return SIU_TYPE2_NR_PORTS;
- }
-
- return 0;
-}
-
static inline unsigned long siu_port_size(struct uart_port *port)
{
switch (port->type) {
@@ -206,21 +167,10 @@ static inline unsigned long siu_port_size(struct uart_port *port)
static inline unsigned int siu_check_type(struct uart_port *port)
{
- switch (current_cpu_data.cputype) {
- case CPU_VR4111:
- case CPU_VR4121:
- if (port->line == 0)
- return PORT_VR41XX_SIU;
- break;
- case CPU_VR4122:
- case CPU_VR4131:
- case CPU_VR4133:
- if (port->line == 0)
- return PORT_VR41XX_SIU;
- else if (port->line == 1)
- return PORT_VR41XX_DSIU;
- break;
- }
+ if (port->line == 0)
+ return PORT_VR41XX_SIU;
+ if (port->line == 1 && port->irq != -1)
+ return PORT_VR41XX_DSIU;
return PORT_UNKNOWN;
}
@@ -751,44 +701,34 @@ static struct uart_ops siu_uart_ops = {
.verify_port = siu_verify_port,
};
-static int siu_init_ports(void)
+static int siu_init_ports(struct platform_device *pdev)
{
- const struct siu_port *siu;
struct uart_port *port;
- int i, num;
+ struct resource *res;
+ int *type = pdev->dev.platform_data;
+ int i;
- switch (current_cpu_data.cputype) {
- case CPU_VR4111:
- case CPU_VR4121:
- siu = siu_type1_ports;
- break;
- case CPU_VR4122:
- case CPU_VR4131:
- case CPU_VR4133:
- siu = siu_type2_ports;
- break;
- default:
+ if (!type)
return 0;
- }
port = siu_uart_ports;
- num = siu_probe_ports();
- for (i = 0; i < num; i++) {
- spin_lock_init(&port->lock);
- port->irq = siu->irq;
+ for (i = 0; i < SIU_PORTS_MAX; i++) {
+ port->type = type[i];
+ if (port->type == PORT_UNKNOWN)
+ continue;
+ port->irq = platform_get_irq(pdev, i);
port->uartclk = SIU_BAUD_BASE * 16;
port->fifosize = 16;
port->regshift = 0;
port->iotype = UPIO_MEM;
port->flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF;
- port->type = siu->type;
port->line = i;
- port->mapbase = siu->start;
- siu++;
+ res = platform_get_resource(pdev, IORESOURCE_MEM, i);
+ port->mapbase = res->start;
port++;
}
- return num;
+ return i;
}
#ifdef CONFIG_SERIAL_VR41XX_CONSOLE
@@ -883,13 +823,9 @@ static struct console siu_console = {
static int __devinit siu_console_init(void)
{
struct uart_port *port;
- int num, i;
-
- num = siu_init_ports();
- if (num <= 0)
- return -ENODEV;
+ int i;
- for (i = 0; i < num; i++) {
+ for (i = 0; i < SIU_PORTS_MAX; i++) {
port = &siu_uart_ports[i];
port->ops = &siu_uart_ops;
}
@@ -920,7 +856,7 @@ static int __devinit siu_probe(struct platform_device *dev)
struct uart_port *port;
int num, i, retval;
- num = siu_init_ports();
+ num = siu_init_ports(dev);
if (num <= 0)
return -ENODEV;
@@ -998,8 +934,6 @@ static int siu_resume(struct platform_device *dev)
return 0;
}
-static struct platform_device *siu_platform_device;
-
static struct platform_driver siu_device_driver = {
.probe = siu_probe,
.remove = __devexit_p(siu_remove),
@@ -1013,29 +947,12 @@ static struct platform_driver siu_device_driver = {
static int __init vr41xx_siu_init(void)
{
- int retval;
-
- siu_platform_device = platform_device_alloc("SIU", -1);
- if (!siu_platform_device)
- return -ENOMEM;
-
- retval = platform_device_add(siu_platform_device);
- if (retval < 0) {
- platform_device_put(siu_platform_device);
- return retval;
- }
-
- retval = platform_driver_register(&siu_device_driver);
- if (retval < 0)
- platform_device_unregister(siu_platform_device);
-
- return retval;
+ return platform_driver_register(&siu_device_driver);
}
static void __exit vr41xx_siu_exit(void)
{
platform_driver_unregister(&siu_device_driver);
- platform_device_unregister(siu_platform_device);
}
module_init(vr41xx_siu_init);
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 03:08:02 +0000