19 files changed, 900 insertions, 145 deletions

diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 30b58eeb439f..9ff47db0b2ce 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -1477,4 +1477,17 @@ config SERIAL_BCM63XX_CONSOLE
 	  If you have enabled the serial port on the bcm63xx CPU
 	  you can make it the console by answering Y to this option.
 
+config SERIAL_GRLIB_GAISLER_APBUART
+	tristate "GRLIB APBUART serial support"
+	depends on OF
+	---help---
+	Add support for the GRLIB APBUART serial port.
+
+config SERIAL_GRLIB_GAISLER_APBUART_CONSOLE
+	bool "Console on GRLIB APBUART serial port"
+	depends on SERIAL_GRLIB_GAISLER_APBUART=y
+	select SERIAL_CORE_CONSOLE
+	help
+	Support for running a console on the GRLIB APBUART
+
 endmenu
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index d21d5dd5d048..5548fe7df61d 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -81,3 +81,4 @@ obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o
 obj-$(CONFIG_KGDB_SERIAL_CONSOLE) += kgdboc.o
 obj-$(CONFIG_SERIAL_QE) += ucc_uart.o
 obj-$(CONFIG_SERIAL_TIMBERDALE)	+= timbuart.o
+obj-$(CONFIG_SERIAL_GRLIB_GAISLER_APBUART) += apbuart.o
diff --git a/drivers/serial/apbuart.c b/drivers/serial/apbuart.c
new file mode 100644
index 000000000000..fe91319b5f65
--- /dev/null
+++ b/drivers/serial/apbuart.c
@@ -0,0 +1,710 @@
+/*
+ *  Driver for GRLIB serial ports (APBUART)
+ *
+ *  Based on linux/drivers/serial/amba.c
+ *
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *  Copyright (C) 2003 Konrad Eisele <eiselekd@web.de>
+ *  Copyright (C) 2006 Daniel Hellstrom <daniel@gaisler.com>, Aeroflex Gaisler AB
+ *  Copyright (C) 2008 Gilead Kutnick <kutnickg@zin-tech.com>
+ *  Copyright (C) 2009 Kristoffer Glembo <kristoffer@gaisler.com>, Aeroflex Gaisler AB
+ */
+
+#if defined(CONFIG_SERIAL_GRLIB_GAISLER_APBUART_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/module.h>
+#include <linux/tty.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+#include <linux/kthread.h>
+#include <linux/device.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/serial_core.h>
+#include <asm/irq.h>
+
+#include "apbuart.h"
+
+#define SERIAL_APBUART_MAJOR	TTY_MAJOR
+#define SERIAL_APBUART_MINOR	64
+#define UART_DUMMY_RSR_RX	0x8000	/* for ignore all read */
+
+static void apbuart_tx_chars(struct uart_port *port);
+
+static void apbuart_stop_tx(struct uart_port *port)
+{
+	unsigned int cr;
+
+	cr = UART_GET_CTRL(port);
+	cr &= ~UART_CTRL_TI;
+	UART_PUT_CTRL(port, cr);
+}
+
+static void apbuart_start_tx(struct uart_port *port)
+{
+	unsigned int cr;
+
+	cr = UART_GET_CTRL(port);
+	cr |= UART_CTRL_TI;
+	UART_PUT_CTRL(port, cr);
+
+	if (UART_GET_STATUS(port) & UART_STATUS_THE)
+		apbuart_tx_chars(port);
+}
+
+static void apbuart_stop_rx(struct uart_port *port)
+{
+	unsigned int cr;
+
+	cr = UART_GET_CTRL(port);
+	cr &= ~(UART_CTRL_RI);
+	UART_PUT_CTRL(port, cr);
+}
+
+static void apbuart_enable_ms(struct uart_port *port)
+{
+	/* No modem status change interrupts for APBUART */
+}
+
+static void apbuart_rx_chars(struct uart_port *port)
+{
+	struct tty_struct *tty = port->state->port.tty;
+	unsigned int status, ch, rsr, flag;
+	unsigned int max_chars = port->fifosize;
+
+	status = UART_GET_STATUS(port);
+
+	while (UART_RX_DATA(status) && (max_chars--)) {
+
+		ch = UART_GET_CHAR(port);
+		flag = TTY_NORMAL;
+
+		port->icount.rx++;
+
+		rsr = UART_GET_STATUS(port) | UART_DUMMY_RSR_RX;
+		UART_PUT_STATUS(port, 0);
+		if (rsr & UART_STATUS_ERR) {
+
+			if (rsr & UART_STATUS_BR) {
+				rsr &= ~(UART_STATUS_FE | UART_STATUS_PE);
+				port->icount.brk++;
+				if (uart_handle_break(port))
+					goto ignore_char;
+			} else if (rsr & UART_STATUS_PE) {
+				port->icount.parity++;
+			} else if (rsr & UART_STATUS_FE) {
+				port->icount.frame++;
+			}
+			if (rsr & UART_STATUS_OE)
+				port->icount.overrun++;
+
+			rsr &= port->read_status_mask;
+
+			if (rsr & UART_STATUS_PE)
+				flag = TTY_PARITY;
+			else if (rsr & UART_STATUS_FE)
+				flag = TTY_FRAME;
+		}
+
+		if (uart_handle_sysrq_char(port, ch))
+			goto ignore_char;
+
+		uart_insert_char(port, rsr, UART_STATUS_OE, ch, flag);
+
+
+	      ignore_char:
+		status = UART_GET_STATUS(port);
+	}
+
+	tty_flip_buffer_push(tty);
+}
+
+static void apbuart_tx_chars(struct uart_port *port)
+{
+	struct circ_buf *xmit = &port->state->xmit;
+	int count;
+
+	if (port->x_char) {
+		UART_PUT_CHAR(port, port->x_char);
+		port->icount.tx++;
+		port->x_char = 0;
+		return;
+	}
+
+	if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
+		apbuart_stop_tx(port);
+		return;
+	}
+
+	/* amba: fill FIFO */
+	count = port->fifosize >> 1;
+	do {
+		UART_PUT_CHAR(port, xmit->buf[xmit->tail]);
+		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+		port->icount.tx++;
+		if (uart_circ_empty(xmit))
+			break;
+	} while (--count > 0);
+
+	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+		uart_write_wakeup(port);
+
+	if (uart_circ_empty(xmit))
+		apbuart_stop_tx(port);
+}
+
+static irqreturn_t apbuart_int(int irq, void *dev_id)
+{
+	struct uart_port *port = dev_id;
+	unsigned int status;
+
+	spin_lock(&port->lock);
+
+	status = UART_GET_STATUS(port);
+	if (status & UART_STATUS_DR)
+		apbuart_rx_chars(port);
+	if (status & UART_STATUS_THE)
+		apbuart_tx_chars(port);
+
+	spin_unlock(&port->lock);
+
+	return IRQ_HANDLED;
+}
+
+static unsigned int apbuart_tx_empty(struct uart_port *port)
+{
+	unsigned int status = UART_GET_STATUS(port);
+	return status & UART_STATUS_THE ? TIOCSER_TEMT : 0;
+}
+
+static unsigned int apbuart_get_mctrl(struct uart_port *port)
+{
+	/* The GRLIB APBUART handles flow control in hardware */
+	return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS;
+}
+
+static void apbuart_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+	/* The GRLIB APBUART handles flow control in hardware */
+}
+
+static void apbuart_break_ctl(struct uart_port *port, int break_state)
+{
+	/* We don't support sending break */
+}
+
+static int apbuart_startup(struct uart_port *port)
+{
+	int retval;
+	unsigned int cr;
+
+	/* Allocate the IRQ */
+	retval = request_irq(port->irq, apbuart_int, 0, "apbuart", port);
+	if (retval)
+		return retval;
+
+	/* Finally, enable interrupts */
+	cr = UART_GET_CTRL(port);
+	UART_PUT_CTRL(port,
+		      cr | UART_CTRL_RE | UART_CTRL_TE |
+		      UART_CTRL_RI | UART_CTRL_TI);
+
+	return 0;
+}
+
+static void apbuart_shutdown(struct uart_port *port)
+{
+	unsigned int cr;
+
+	/* disable all interrupts, disable the port */
+	cr = UART_GET_CTRL(port);
+	UART_PUT_CTRL(port,
+		      cr & ~(UART_CTRL_RE | UART_CTRL_TE |
+			     UART_CTRL_RI | UART_CTRL_TI));
+
+	/* Free the interrupt */
+	free_irq(port->irq, port);
+}
+
+static void apbuart_set_termios(struct uart_port *port,
+				struct ktermios *termios, struct ktermios *old)
+{
+	unsigned int cr;
+	unsigned long flags;
+	unsigned int baud, quot;
+
+	/* Ask the core to calculate the divisor for us. */
+	baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16);
+	if (baud == 0)
+		panic("invalid baudrate %i\n", port->uartclk / 16);
+
+	/* uart_get_divisor calc a *16 uart freq, apbuart is *8 */
+	quot = (uart_get_divisor(port, baud)) * 2;
+	cr = UART_GET_CTRL(port);
+	cr &= ~(UART_CTRL_PE | UART_CTRL_PS);
+
+	if (termios->c_cflag & PARENB) {
+		cr |= UART_CTRL_PE;
+		if ((termios->c_cflag & PARODD))
+			cr |= UART_CTRL_PS;
+	}
+
+	/* Enable flow control. */
+	if (termios->c_cflag & CRTSCTS)
+		cr |= UART_CTRL_FL;
+
+	spin_lock_irqsave(&port->lock, flags);
+
+	/* Update the per-port timeout. */
+	uart_update_timeout(port, termios->c_cflag, baud);
+
+	port->read_status_mask = UART_STATUS_OE;
+	if (termios->c_iflag & INPCK)
+		port->read_status_mask |= UART_STATUS_FE | UART_STATUS_PE;
+
+	/* Characters to ignore */
+	port->ignore_status_mask = 0;
+	if (termios->c_iflag & IGNPAR)
+		port->ignore_status_mask |= UART_STATUS_FE | UART_STATUS_PE;
+
+	/* Ignore all characters if CREAD is not set. */
+	if ((termios->c_cflag & CREAD) == 0)
+		port->ignore_status_mask |= UART_DUMMY_RSR_RX;
+
+	/* Set baud rate */
+	quot -= 1;
+	UART_PUT_SCAL(port, quot);
+	UART_PUT_CTRL(port, cr);
+
+	spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static const char *apbuart_type(struct uart_port *port)
+{
+	return port->type == PORT_APBUART ? "GRLIB/APBUART" : NULL;
+}
+
+static void apbuart_release_port(struct uart_port *port)
+{
+	release_mem_region(port->mapbase, 0x100);
+}
+
+static int apbuart_request_port(struct uart_port *port)
+{
+	return request_mem_region(port->mapbase, 0x100, "grlib-apbuart")
+	    != NULL ? 0 : -EBUSY;
+	return 0;
+}
+
+/* Configure/autoconfigure the port */
+static void apbuart_config_port(struct uart_port *port, int flags)
+{
+	if (flags & UART_CONFIG_TYPE) {
+		port->type = PORT_APBUART;
+		apbuart_request_port(port);
+	}
+}
+
+/* Verify the new serial_struct (for TIOCSSERIAL) */
+static int apbuart_verify_port(struct uart_port *port,
+			       struct serial_struct *ser)
+{
+	int ret = 0;
+	if (ser->type != PORT_UNKNOWN && ser->type != PORT_APBUART)
+		ret = -EINVAL;
+	if (ser->irq < 0 || ser->irq >= NR_IRQS)
+		ret = -EINVAL;
+	if (ser->baud_base < 9600)
+		ret = -EINVAL;
+	return ret;
+}
+
+static struct uart_ops grlib_apbuart_ops = {
+	.tx_empty = apbuart_tx_empty,
+	.set_mctrl = apbuart_set_mctrl,
+	.get_mctrl = apbuart_get_mctrl,
+	.stop_tx = apbuart_stop_tx,
+	.start_tx = apbuart_start_tx,
+	.stop_rx = apbuart_stop_rx,
+	.enable_ms = apbuart_enable_ms,
+	.break_ctl = apbuart_break_ctl,
+	.startup = apbuart_startup,
+	.shutdown = apbuart_shutdown,
+	.set_termios = apbuart_set_termios,
+	.type = apbuart_type,
+	.release_port = apbuart_release_port,
+	.request_port = apbuart_request_port,
+	.config_port = apbuart_config_port,
+	.verify_port = apbuart_verify_port,
+};
+
+static struct uart_port grlib_apbuart_ports[UART_NR];
+static struct device_node *grlib_apbuart_nodes[UART_NR];
+
+static int apbuart_scan_fifo_size(struct uart_port *port, int portnumber)
+{
+	int ctrl, loop = 0;
+	int status;
+	int fifosize;
+	unsigned long flags;
+
+	ctrl = UART_GET_CTRL(port);
+
+	/*
+	 * Enable the transceiver and wait for it to be ready to send data.
+	 * Clear interrupts so that this process will not be externally
+	 * interrupted in the middle (which can cause the transceiver to
+	 * drain prematurely).
+	 */
+
+	local_irq_save(flags);
+
+	UART_PUT_CTRL(port, ctrl | UART_CTRL_TE);
+
+	while (!UART_TX_READY(UART_GET_STATUS(port)))
+		loop++;
+
+	/*
+	 * Disable the transceiver so data isn't actually sent during the
+	 * actual test.
+	 */
+
+	UART_PUT_CTRL(port, ctrl & ~(UART_CTRL_TE));
+
+	fifosize = 1;
+	UART_PUT_CHAR(port, 0);
+
+	/*
+	 * So long as transmitting a character increments the tranceivier FIFO
+	 * length the FIFO must be at least that big. These bytes will
+	 * automatically drain off of the FIFO.
+	 */
+
+	status = UART_GET_STATUS(port);
+	while (((status >> 20) & 0x3F) == fifosize) {
+		fifosize++;
+		UART_PUT_CHAR(port, 0);
+		status = UART_GET_STATUS(port);
+	}
+
+	fifosize--;
+
+	UART_PUT_CTRL(port, ctrl);
+	local_irq_restore(flags);
+
+	if (fifosize == 0)
+		fifosize = 1;
+
+	return fifosize;
+}
+
+static void apbuart_flush_fifo(struct uart_port *port)
+{
+	int i;
+
+	for (i = 0; i < port->fifosize; i++)
+		UART_GET_CHAR(port);
+}
+
+
+/* ======================================================================== */
+/* Console driver, if enabled                                               */
+/* ======================================================================== */
+
+#ifdef CONFIG_SERIAL_GRLIB_GAISLER_APBUART_CONSOLE
+
+static void apbuart_console_putchar(struct uart_port *port, int ch)
+{
+	unsigned int status;
+	do {
+		status = UART_GET_STATUS(port);
+	} while (!UART_TX_READY(status));
+	UART_PUT_CHAR(port, ch);
+}
+
+static void
+apbuart_console_write(struct console *co, const char *s, unsigned int count)
+{
+	struct uart_port *port = &grlib_apbuart_ports[co->index];
+	unsigned int status, old_cr, new_cr;
+
+	/* First save the CR then disable the interrupts */
+	old_cr = UART_GET_CTRL(port);
+	new_cr = old_cr & ~(UART_CTRL_RI | UART_CTRL_TI);
+	UART_PUT_CTRL(port, new_cr);
+
+	uart_console_write(port, s, count, apbuart_console_putchar);
+
+	/*
+	 *      Finally, wait for transmitter to become empty
+	 *      and restore the TCR
+	 */
+	do {
+		status = UART_GET_STATUS(port);
+	} while (!UART_TX_READY(status));
+	UART_PUT_CTRL(port, old_cr);
+}
+
+static void __init
+apbuart_console_get_options(struct uart_port *port, int *baud,
+			    int *parity, int *bits)
+{
+	if (UART_GET_CTRL(port) & (UART_CTRL_RE | UART_CTRL_TE)) {
+
+		unsigned int quot, status;
+		status = UART_GET_STATUS(port);
+
+		*parity = 'n';
+		if (status & UART_CTRL_PE) {
+			if ((status & UART_CTRL_PS) == 0)
+				*parity = 'e';
+			else
+				*parity = 'o';
+		}
+
+		*bits = 8;
+		quot = UART_GET_SCAL(port) / 8;
+		*baud = port->uartclk / (16 * (quot + 1));
+	}
+}
+
+static int __init apbuart_console_setup(struct console *co, char *options)
+{
+	struct uart_port *port;
+	int baud = 38400;
+	int bits = 8;
+	int parity = 'n';
+	int flow = 'n';
+
+	pr_debug("apbuart_console_setup co=%p, co->index=%i, options=%s\n",
+		 co, co->index, options);
+
+	/*
+	 * Check whether an invalid uart number has been specified, and
+	 * if so, search for the first available port that does have
+	 * console support.
+	 */
+	if (co->index >= grlib_apbuart_port_nr)
+		co->index = 0;
+
+	port = &grlib_apbuart_ports[co->index];
+
+	spin_lock_init(&port->lock);
+
+	if (options)
+		uart_parse_options(options, &baud, &parity, &bits, &flow);
+	else
+		apbuart_console_get_options(port, &baud, &parity, &bits);
+
+	return uart_set_options(port, co, baud, parity, bits, flow);
+}
+
+static struct uart_driver grlib_apbuart_driver;
+
+static struct console grlib_apbuart_console = {
+	.name = "ttyS",
+	.write = apbuart_console_write,
+	.device = uart_console_device,
+	.setup = apbuart_console_setup,
+	.flags = CON_PRINTBUFFER,
+	.index = -1,
+	.data = &grlib_apbuart_driver,
+};
+
+
+static void grlib_apbuart_configure(void);
+
+static int __init apbuart_console_init(void)
+{
+	grlib_apbuart_configure();
+	register_console(&grlib_apbuart_console);
+	return 0;
+}
+
+console_initcall(apbuart_console_init);
+
+#define APBUART_CONSOLE	(&grlib_apbuart_console)
+#else
+#define APBUART_CONSOLE	NULL
+#endif
+
+static struct uart_driver grlib_apbuart_driver = {
+	.owner = THIS_MODULE,
+	.driver_name = "serial",
+	.dev_name = "ttyS",
+	.major = SERIAL_APBUART_MAJOR,
+	.minor = SERIAL_APBUART_MINOR,
+	.nr = UART_NR,
+	.cons = APBUART_CONSOLE,
+};
+
+
+/* ======================================================================== */
+/* OF Platform Driver                                                       */
+/* ======================================================================== */
+
+static int __devinit apbuart_probe(struct of_device *op,
+				   const struct of_device_id *match)
+{
+	int i = -1;
+	struct uart_port *port = NULL;
+
+	i = 0;
+	for (i = 0; i < grlib_apbuart_port_nr; i++) {
+		if (op->node == grlib_apbuart_nodes[i])
+			break;
+	}
+
+	port = &grlib_apbuart_ports[i];
+	port->dev = &op->dev;
+
+	uart_add_one_port(&grlib_apbuart_driver, (struct uart_port *) port);
+
+	apbuart_flush_fifo((struct uart_port *) port);
+
+	printk(KERN_INFO "grlib-apbuart at 0x%llx, irq %d\n",
+	       (unsigned long long) port->mapbase, port->irq);
+	return 0;
+
+}
+
+static struct of_device_id __initdata apbuart_match[] = {
+	{
+	 .name = "GAISLER_APBUART",
+	 },
+	{},
+};
+
+static struct of_platform_driver grlib_apbuart_of_driver = {
+	.match_table = apbuart_match,
+	.probe = apbuart_probe,
+	.driver = {
+		   .owner = THIS_MODULE,
+		   .name = "grlib-apbuart",
+		   },
+};
+
+
+static void grlib_apbuart_configure(void)
+{
+	static int enum_done;
+	struct device_node *np, *rp;
+	struct uart_port *port = NULL;
+	const u32 *prop;
+	int freq_khz;
+	int v = 0, d = 0;
+	unsigned int addr;
+	int irq, line;
+	struct amba_prom_registers *regs;
+
+	if (enum_done)
+		return;
+
+	/* Get bus frequency */
+	rp = of_find_node_by_path("/");
+	rp = of_get_next_child(rp, NULL);
+	prop = of_get_property(rp, "clock-frequency", NULL);
+	freq_khz = *prop;
+
+	line = 0;
+	for_each_matching_node(np, apbuart_match) {
+
+		int *vendor = (int *) of_get_property(np, "vendor", NULL);
+		int *device = (int *) of_get_property(np, "device", NULL);
+		int *irqs = (int *) of_get_property(np, "interrupts", NULL);
+		regs = (struct amba_prom_registers *)
+		    of_get_property(np, "reg", NULL);
+
+		if (vendor)
+			v = *vendor;
+		if (device)
+			d = *device;
+
+		if (!irqs || !regs)
+			return;
+
+		grlib_apbuart_nodes[line] = np;
+
+		addr = regs->phys_addr;
+		irq = *irqs;
+
+		port = &grlib_apbuart_ports[line];
+
+		port->mapbase = addr;
+		port->membase = ioremap(addr, sizeof(struct grlib_apbuart_regs_map));
+		port->irq = irq;
+		port->iotype = UPIO_MEM;
+		port->ops = &grlib_apbuart_ops;
+		port->flags = UPF_BOOT_AUTOCONF;
+		port->line = line;
+		port->uartclk = freq_khz * 1000;
+		port->fifosize = apbuart_scan_fifo_size((struct uart_port *) port, line);
+		line++;
+
+		/* We support maximum UART_NR uarts ... */
+		if (line == UART_NR)
+			break;
+
+	}
+
+	enum_done = 1;
+
+	grlib_apbuart_driver.nr = grlib_apbuart_port_nr = line;
+}
+
+static int __init grlib_apbuart_init(void)
+{
+	int ret;
+
+	/* Find all APBUARTS in device the tree and initialize their ports */
+	grlib_apbuart_configure();
+
+	printk(KERN_INFO "Serial: GRLIB APBUART driver\n");
+
+	ret = uart_register_driver(&grlib_apbuart_driver);
+
+	if (ret) {
+		printk(KERN_ERR "%s: uart_register_driver failed (%i)\n",
+		       __FILE__, ret);
+		return ret;
+	}
+
+	ret = of_register_platform_driver(&grlib_apbuart_of_driver);
+	if (ret) {
+		printk(KERN_ERR
+		       "%s: of_register_platform_driver failed (%i)\n",
+		       __FILE__, ret);
+		uart_unregister_driver(&grlib_apbuart_driver);
+		return ret;
+	}
+
+	return ret;
+}
+
+static void __exit grlib_apbuart_exit(void)
+{
+	int i;
+
+	for (i = 0; i < grlib_apbuart_port_nr; i++)
+		uart_remove_one_port(&grlib_apbuart_driver,
+				     &grlib_apbuart_ports[i]);
+
+	uart_unregister_driver(&grlib_apbuart_driver);
+	of_unregister_platform_driver(&grlib_apbuart_of_driver);
+}
+
+module_init(grlib_apbuart_init);
+module_exit(grlib_apbuart_exit);
+
+MODULE_AUTHOR("Aeroflex Gaisler AB");
+MODULE_DESCRIPTION("GRLIB APBUART serial driver");
+MODULE_VERSION("2.1");
+MODULE_LICENSE("GPL");
diff --git a/drivers/serial/apbuart.h b/drivers/serial/apbuart.h
new file mode 100644
index 000000000000..5faf87c8d2bc
--- /dev/null
+++ b/drivers/serial/apbuart.h
@@ -0,0 +1,64 @@
+#ifndef __GRLIB_APBUART_H__
+#define __GRLIB_APBUART_H__
+
+#include <asm/io.h>
+
+#define UART_NR		8
+static int grlib_apbuart_port_nr;
+
+struct grlib_apbuart_regs_map {
+	u32 data;
+	u32 status;
+	u32 ctrl;
+	u32 scaler;
+};
+
+struct amba_prom_registers {
+	unsigned int phys_addr;
+	unsigned int reg_size;
+};
+
+/*
+ *  The following defines the bits in the APBUART Status Registers.
+ */
+#define UART_STATUS_DR   0x00000001	/* Data Ready */
+#define UART_STATUS_TSE  0x00000002	/* TX Send Register Empty */
+#define UART_STATUS_THE  0x00000004	/* TX Hold Register Empty */
+#define UART_STATUS_BR   0x00000008	/* Break Error */
+#define UART_STATUS_OE   0x00000010	/* RX Overrun Error */
+#define UART_STATUS_PE   0x00000020	/* RX Parity Error */
+#define UART_STATUS_FE   0x00000040	/* RX Framing Error */
+#define UART_STATUS_ERR  0x00000078	/* Error Mask */
+
+/*
+ *  The following defines the bits in the APBUART Ctrl Registers.
+ */
+#define UART_CTRL_RE     0x00000001	/* Receiver enable */
+#define UART_CTRL_TE     0x00000002	/* Transmitter enable */
+#define UART_CTRL_RI     0x00000004	/* Receiver interrupt enable */
+#define UART_CTRL_TI     0x00000008	/* Transmitter irq */
+#define UART_CTRL_PS     0x00000010	/* Parity select */
+#define UART_CTRL_PE     0x00000020	/* Parity enable */
+#define UART_CTRL_FL     0x00000040	/* Flow control enable */
+#define UART_CTRL_LB     0x00000080	/* Loopback enable */
+
+#define APBBASE(port) ((struct grlib_apbuart_regs_map *)((port)->membase))
+
+#define APBBASE_DATA_P(port)	(&(APBBASE(port)->data))
+#define APBBASE_STATUS_P(port)	(&(APBBASE(port)->status))
+#define APBBASE_CTRL_P(port)	(&(APBBASE(port)->ctrl))
+#define APBBASE_SCALAR_P(port)	(&(APBBASE(port)->scaler))
+
+#define UART_GET_CHAR(port)	(__raw_readl(APBBASE_DATA_P(port)))
+#define UART_PUT_CHAR(port, v)	(__raw_writel(v, APBBASE_DATA_P(port)))
+#define UART_GET_STATUS(port)	(__raw_readl(APBBASE_STATUS_P(port)))
+#define UART_PUT_STATUS(port, v)(__raw_writel(v, APBBASE_STATUS_P(port)))
+#define UART_GET_CTRL(port)	(__raw_readl(APBBASE_CTRL_P(port)))
+#define UART_PUT_CTRL(port, v)	(__raw_writel(v, APBBASE_CTRL_P(port)))
+#define UART_GET_SCAL(port)	(__raw_readl(APBBASE_SCALAR_P(port)))
+#define UART_PUT_SCAL(port, v)	(__raw_writel(v, APBBASE_SCALAR_P(port)))
+
+#define UART_RX_DATA(s)		(((s) & UART_STATUS_DR) != 0)
+#define UART_TX_READY(s)	(((s) & UART_STATUS_THE) != 0)
+
+#endif /* __GRLIB_APBUART_H__ */
diff --git a/drivers/serial/bcm63xx_uart.c b/drivers/serial/bcm63xx_uart.c
index beddaa6e9069..37ad0c449937 100644
--- a/drivers/serial/bcm63xx_uart.c
+++ b/drivers/serial/bcm63xx_uart.c
@@ -242,7 +242,7 @@ static void bcm_uart_do_rx(struct uart_port *port)
 	 * higher than fifo size anyway since we're much faster than
 	 * serial port */
 	max_count = 32;
-	tty = port->info->port.tty;
+	tty = port->state->port.tty;
 	do {
 		unsigned int iestat, c, cstat;
 		char flag;
@@ -318,7 +318,7 @@ static void bcm_uart_do_tx(struct uart_port *port)
 		return;
 	}
 
-	xmit = &port->info->xmit;
+	xmit = &port->state->xmit;
 	if (uart_circ_empty(xmit))
 		goto txq_empty;
 
diff --git a/drivers/serial/of_serial.c b/drivers/serial/of_serial.c
index 02406ba6da1c..cdf172eda2e3 100644
--- a/drivers/serial/of_serial.c
+++ b/drivers/serial/of_serial.c
@@ -161,6 +161,7 @@ static int of_platform_serial_remove(struct of_device *ofdev)
 static struct of_device_id __devinitdata of_platform_serial_table[] = {
 	{ .type = "serial", .compatible = "ns8250",   .data = (void *)PORT_8250, },
 	{ .type = "serial", .compatible = "ns16450",  .data = (void *)PORT_16450, },
+	{ .type = "serial", .compatible = "ns16550a", .data = (void *)PORT_16550A, },
 	{ .type = "serial", .compatible = "ns16550",  .data = (void *)PORT_16550, },
 	{ .type = "serial", .compatible = "ns16750",  .data = (void *)PORT_16750, },
 	{ .type = "serial", .compatible = "ns16850",  .data = (void *)PORT_16850, },
diff --git a/drivers/serial/s3c2410.c b/drivers/serial/s3c2410.c
index c99f0821cae3..73f089d3efd6 100644
--- a/drivers/serial/s3c2410.c
+++ b/drivers/serial/s3c2410.c
@@ -2,7 +2,7 @@
  *
  * Driver for Samsung S3C2410 SoC onboard UARTs.
  *
- * Ben Dooks, Copyright (c) 2003-2005,2008 Simtec Electronics
+ * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *
  * This program is free software; you can redistribute it and/or modify
diff --git a/drivers/serial/s3c2412.c b/drivers/serial/s3c2412.c
index 6e057d8809d3..ce75e28e36ef 100644
--- a/drivers/serial/s3c2412.c
+++ b/drivers/serial/s3c2412.c
@@ -2,7 +2,7 @@
  *
  * Driver for Samsung S3C2412 and S3C2413 SoC onboard UARTs.
  *
- * Ben Dooks, Copyright (c) 2003-2005,2008 Simtec Electronics
+ * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *
  * This program is free software; you can redistribute it and/or modify
diff --git a/drivers/serial/s3c2440.c b/drivers/serial/s3c2440.c
index 69ff5d340f04..094cc3904b13 100644
--- a/drivers/serial/s3c2440.c
+++ b/drivers/serial/s3c2440.c
@@ -2,7 +2,7 @@
  *
  * Driver for Samsung S3C2440 and S3C2442 SoC onboard UARTs.
  *
- * Ben Dooks, Copyright (c) 2003-2005,2008 Simtec Electronics
+ * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *
  * This program is free software; you can redistribute it and/or modify
diff --git a/drivers/serial/s3c24a0.c b/drivers/serial/s3c24a0.c
index 26c49e18bdd1..fad6083ca427 100644
--- a/drivers/serial/s3c24a0.c
+++ b/drivers/serial/s3c24a0.c
@@ -6,7 +6,7 @@
  *
  * Author: Sandeep Patil <sandeep.patil@azingo.com>
  *
- * Ben Dooks, Copyright (c) 2003-2005,2008 Simtec Electronics
+ * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *
  * This program is free software; you can redistribute it and/or modify
diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c
index 1523e8d9ae77..52e3df113ec0 100644
--- a/drivers/serial/samsung.c
+++ b/drivers/serial/samsung.c
@@ -2,7 +2,7 @@
  *
  * Driver core for Samsung SoC onboard UARTs.
  *
- * Ben Dooks, Copyright (c) 2003-2005,2008 Simtec Electronics
+ * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *
  * This program is free software; you can redistribute it and/or modify
diff --git a/drivers/serial/samsung.h b/drivers/serial/samsung.h
index d3fe315969f6..1fb22343df42 100644
--- a/drivers/serial/samsung.h
+++ b/drivers/serial/samsung.h
@@ -2,7 +2,7 @@
  *
  * Driver for Samsung SoC onboard UARTs.
  *
- * Ben Dooks, Copyright (c) 2003-2005,2008 Simtec Electronics
+ * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *
  * This program is free software; you can redistribute it and/or modify
diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index 7c7914f5fa02..fc413f0f8dd2 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -54,14 +54,6 @@
 
 #include "8250.h"
 
-#ifdef PCMCIA_DEBUG
-static int pc_debug = PCMCIA_DEBUG;
-module_param(pc_debug, int, 0644);
-#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
-static char *version = "serial_cs.c 1.134 2002/05/04 05:48:53 (David Hinds)";
-#else
-#define DEBUG(n, args...)
-#endif
 
 /*====================================================================*/
 
@@ -121,24 +113,20 @@ static void quirk_setup_brainboxes_0104(struct pcmcia_device *link, struct uart_
 static int quirk_post_ibm(struct pcmcia_device *link)
 {
 	conf_reg_t reg = { 0, CS_READ, 0x800, 0 };
-	int last_ret, last_fn;
+	int ret;
+
+	ret = pcmcia_access_configuration_register(link, &reg);
+	if (ret)
+		goto failed;
 
-	last_ret = pcmcia_access_configuration_register(link, &reg);
-	if (last_ret) {
-		last_fn = AccessConfigurationRegister;
-		goto cs_failed;
-	}
 	reg.Action = CS_WRITE;
 	reg.Value = reg.Value | 1;
-	last_ret = pcmcia_access_configuration_register(link, &reg);
-	if (last_ret) {
-		last_fn = AccessConfigurationRegister;
-		goto cs_failed;
-	}
+	ret = pcmcia_access_configuration_register(link, &reg);
+	if (ret)
+		goto failed;
 	return 0;
 
- cs_failed:
-	cs_error(link, last_fn, last_ret);
+ failed:
 	return -ENODEV;
 }
 
@@ -283,7 +271,7 @@ static void serial_remove(struct pcmcia_device *link)
 	struct serial_info *info = link->priv;
 	int i;
 
-	DEBUG(0, "serial_release(0x%p)\n", link);
+	dev_dbg(&link->dev, "serial_release\n");
 
 	/*
 	 * Recheck to see if the device is still configured.
@@ -334,7 +322,7 @@ static int serial_probe(struct pcmcia_device *link)
 {
 	struct serial_info *info;
 
-	DEBUG(0, "serial_attach()\n");
+	dev_dbg(&link->dev, "serial_attach()\n");
 
 	/* Create new serial device */
 	info = kzalloc(sizeof (*info), GFP_KERNEL);
@@ -346,7 +334,6 @@ static int serial_probe(struct pcmcia_device *link)
 	link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
 	link->io.NumPorts1 = 8;
 	link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
-	link->irq.IRQInfo1 = IRQ_LEVEL_ID;
 	link->conf.Attributes = CONF_ENABLE_IRQ;
 	if (do_sound) {
 		link->conf.Attributes |= CONF_ENABLE_SPKR;
@@ -370,7 +357,7 @@ static void serial_detach(struct pcmcia_device *link)
 {
 	struct serial_info *info = link->priv;
 
-	DEBUG(0, "serial_detach(0x%p)\n", link);
+	dev_dbg(&link->dev, "serial_detach\n");
 
 	/*
 	 * Ensure any outstanding scheduled tasks are completed.
@@ -399,7 +386,7 @@ static int setup_serial(struct pcmcia_device *handle, struct serial_info * info,
 	port.irq = irq;
 	port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ;
 	port.uartclk = 1843200;
-	port.dev = &handle_to_dev(handle);
+	port.dev = &handle->dev;
 	if (buggy_uart)
 		port.flags |= UPF_BUGGY_UART;
 
@@ -426,21 +413,6 @@ static int setup_serial(struct pcmcia_device *handle, struct serial_info * info,
 
 /*====================================================================*/
 
-static int
-first_tuple(struct pcmcia_device *handle, tuple_t * tuple, cisparse_t * parse)
-{
-	int i;
-	i = pcmcia_get_first_tuple(handle, tuple);
-	if (i != 0)
-		return i;
-	i = pcmcia_get_tuple_data(handle, tuple);
-	if (i != 0)
-		return i;
-	return pcmcia_parse_tuple(tuple, parse);
-}
-
-/*====================================================================*/
-
 static int simple_config_check(struct pcmcia_device *p_dev,
 			       cistpl_cftable_entry_t *cf,
 			       cistpl_cftable_entry_t *dflt,
@@ -522,15 +494,13 @@ static int simple_config(struct pcmcia_device *link)
 
 	printk(KERN_NOTICE
 	       "serial_cs: no usable port range found, giving up\n");
-	cs_error(link, RequestIO, i);
 	return -1;
 
 found_port:
 	i = pcmcia_request_irq(link, &link->irq);
-	if (i != 0) {
-		cs_error(link, RequestIRQ, i);
+	if (i != 0)
 		link->irq.AssignedIRQ = 0;
-	}
+
 	if (info->multi && (info->manfid == MANFID_3COM))
 		link->conf.ConfigIndex &= ~(0x08);
 
@@ -541,10 +511,8 @@ found_port:
 		info->quirk->config(link);
 
 	i = pcmcia_request_configuration(link, &link->conf);
-	if (i != 0) {
-		cs_error(link, RequestConfiguration, i);
+	if (i != 0)
 		return -1;
-	}
 	return setup_serial(link, info, link->io.BasePort1, link->irq.AssignedIRQ);
 }
 
@@ -613,7 +581,6 @@ static int multi_config(struct pcmcia_device *link)
 		/* FIXME: comment does not fit, error handling does not fit */
 		printk(KERN_NOTICE
 		       "serial_cs: no usable port range found, giving up\n");
-		cs_error(link, RequestIRQ, i);
 		link->irq.AssignedIRQ = 0;
 	}
 
@@ -624,10 +591,8 @@ static int multi_config(struct pcmcia_device *link)
 		info->quirk->config(link);
 
 	i = pcmcia_request_configuration(link, &link->conf);
-	if (i != 0) {
-		cs_error(link, RequestConfiguration, i);
+	if (i != 0)
 		return -ENODEV;
-	}
 
 	/* The Oxford Semiconductor OXCF950 cards are in fact single-port:
 	 * 8 registers are for the UART, the others are extra registers.
@@ -665,6 +630,25 @@ static int multi_config(struct pcmcia_device *link)
 	return 0;
 }
 
+static int serial_check_for_multi(struct pcmcia_device *p_dev,
+				  cistpl_cftable_entry_t *cf,
+				  cistpl_cftable_entry_t *dflt,
+				  unsigned int vcc,
+				  void *priv_data)
+{
+	struct serial_info *info = p_dev->priv;
+
+	if ((cf->io.nwin == 1) && (cf->io.win[0].len % 8 == 0))
+		info->multi = cf->io.win[0].len >> 3;
+
+	if ((cf->io.nwin == 2) && (cf->io.win[0].len == 8) &&
+		(cf->io.win[1].len == 8))
+		info->multi = 2;
+
+	return 0; /* break */
+}
+
+
 /*======================================================================
 
     serial_config() is scheduled to run after a CARD_INSERTION event
@@ -676,46 +660,14 @@ static int multi_config(struct pcmcia_device *link)
 static int serial_config(struct pcmcia_device * link)
 {
 	struct serial_info *info = link->priv;
-	struct serial_cfg_mem *cfg_mem;
-	tuple_t *tuple;
-	u_char *buf;
-	cisparse_t *parse;
-	cistpl_cftable_entry_t *cf;
-	int i, last_ret, last_fn;
-
-	DEBUG(0, "serial_config(0x%p)\n", link);
-
-	cfg_mem = kmalloc(sizeof(struct serial_cfg_mem), GFP_KERNEL);
-	if (!cfg_mem)
-		goto failed;
+	int i;
 
-	tuple = &cfg_mem->tuple;
-	parse = &cfg_mem->parse;
-	cf = &parse->cftable_entry;
-	buf = cfg_mem->buf;
-
-	tuple->TupleData = (cisdata_t *) buf;
-	tuple->TupleOffset = 0;
-	tuple->TupleDataMax = 255;
-	tuple->Attributes = 0;
-
-	/* Get configuration register information */
-	tuple->DesiredTuple = CISTPL_CONFIG;
-	last_ret = first_tuple(link, tuple, parse);
-	if (last_ret != 0) {
-		last_fn = ParseTuple;
-		goto cs_failed;
-	}
-	link->conf.ConfigBase = parse->config.base;
-	link->conf.Present = parse->config.rmask[0];
+	dev_dbg(&link->dev, "serial_config\n");
 
 	/* Is this a compliant multifunction card? */
-	tuple->DesiredTuple = CISTPL_LONGLINK_MFC;
-	tuple->Attributes = TUPLE_RETURN_COMMON | TUPLE_RETURN_LINK;
-	info->multi = (first_tuple(link, tuple, parse) == 0);
+	info->multi = (link->socket->functions > 1);
 
 	/* Is this a multiport card? */
-	tuple->DesiredTuple = CISTPL_MANFID;
 	info->manfid = link->manf_id;
 	info->prodid = link->card_id;
 
@@ -730,20 +682,11 @@ static int serial_config(struct pcmcia_device * link)
 
 	/* Another check for dual-serial cards: look for either serial or
 	   multifunction cards that ask for appropriate IO port ranges */
-	tuple->DesiredTuple = CISTPL_FUNCID;
 	if ((info->multi == 0) &&
 	    (link->has_func_id) &&
 	    ((link->func_id == CISTPL_FUNCID_MULTI) ||
-	     (link->func_id == CISTPL_FUNCID_SERIAL))) {
-		tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY;
-		if (first_tuple(link, tuple, parse) == 0) {
-			if ((cf->io.nwin == 1) && (cf->io.win[0].len % 8 == 0))
-				info->multi = cf->io.win[0].len >> 3;
-			if ((cf->io.nwin == 2) && (cf->io.win[0].len == 8) &&
-			    (cf->io.win[1].len == 8))
-				info->multi = 2;
-		}
-	}
+	     (link->func_id == CISTPL_FUNCID_SERIAL)))
+		pcmcia_loop_config(link, serial_check_for_multi, info);
 
 	/*
 	 * Apply any multi-port quirk.
@@ -768,14 +711,10 @@ static int serial_config(struct pcmcia_device * link)
 			goto failed;
 
 	link->dev_node = &info->node[0];
-	kfree(cfg_mem);
 	return 0;
 
-cs_failed:
-	cs_error(link, last_fn, last_ret);
 failed:
 	serial_remove(link);
-	kfree(cfg_mem);
 	return -ENODEV;
 }
 
diff --git a/drivers/serial/suncore.c b/drivers/serial/suncore.c
index a2d4a19550ab..ed7d958b0a01 100644
--- a/drivers/serial/suncore.c
+++ b/drivers/serial/suncore.c
@@ -53,20 +53,21 @@ void sunserial_unregister_minors(struct uart_driver *drv, int count)
 EXPORT_SYMBOL(sunserial_unregister_minors);
 
 int sunserial_console_match(struct console *con, struct device_node *dp,
-			    struct uart_driver *drv, int line)
+			    struct uart_driver *drv, int line, bool ignore_line)
 {
-	int off;
-
 	if (!con || of_console_device != dp)
 		return 0;
 
-	off = 0;
-	if (of_console_options &&
-	    *of_console_options == 'b')
-		off = 1;
+	if (!ignore_line) {
+		int off = 0;
 
-	if ((line & 1) != off)
-		return 0;
+		if (of_console_options &&
+		    *of_console_options == 'b')
+			off = 1;
+
+		if ((line & 1) != off)
+			return 0;
+	}
 
 	con->index = line;
 	drv->cons = con;
@@ -76,23 +77,24 @@ int sunserial_console_match(struct console *con, struct device_node *dp,
 }
 EXPORT_SYMBOL(sunserial_console_match);
 
-void
-sunserial_console_termios(struct console *con)
+void sunserial_console_termios(struct console *con, struct device_node *uart_dp)
 {
-	struct device_node *dp;
-	const char *od, *mode, *s;
+	const char *mode, *s;
 	char mode_prop[] = "ttyX-mode";
 	int baud, bits, stop, cflag;
 	char parity;
 
-	dp = of_find_node_by_path("/options");
-	od = of_get_property(dp, "output-device", NULL);
-	if (!strcmp(od, "rsc")) {
-		mode = of_get_property(of_console_device,
+	if (!strcmp(uart_dp->name, "rsc") ||
+	    !strcmp(uart_dp->name, "rsc-console") ||
+	    !strcmp(uart_dp->name, "rsc-control")) {
+		mode = of_get_property(uart_dp,
 				       "ssp-console-modes", NULL);
 		if (!mode)
 			mode = "115200,8,n,1,-";
+	} else if (!strcmp(uart_dp->name, "lom-console")) {
+		mode = "9600,8,n,1,-";
 	} else {
+		struct device_node *dp;
 		char c;
 
 		c = 'a';
@@ -101,6 +103,7 @@ sunserial_console_termios(struct console *con)
 
 		mode_prop[3] = c;
 
+		dp = of_find_node_by_path("/options");
 		mode = of_get_property(dp, mode_prop, NULL);
 		if (!mode)
 			mode = "9600,8,n,1,-";
diff --git a/drivers/serial/suncore.h b/drivers/serial/suncore.h
index 042668aa602e..db2057936c31 100644
--- a/drivers/serial/suncore.h
+++ b/drivers/serial/suncore.h
@@ -26,7 +26,8 @@ extern int sunserial_register_minors(struct uart_driver *, int);
 extern void sunserial_unregister_minors(struct uart_driver *, int);
 
 extern int sunserial_console_match(struct console *, struct device_node *,
-				   struct uart_driver *, int);
-extern void sunserial_console_termios(struct console *);
+				   struct uart_driver *, int, bool);
+extern void sunserial_console_termios(struct console *,
+				      struct device_node *);
 
 #endif /* !(_SERIAL_SUN_H) */
diff --git a/drivers/serial/sunhv.c b/drivers/serial/sunhv.c
index d548652dee50..d14cca7fb88d 100644
--- a/drivers/serial/sunhv.c
+++ b/drivers/serial/sunhv.c
@@ -566,7 +566,7 @@ static int __devinit hv_probe(struct of_device *op, const struct of_device_id *m
 		goto out_free_con_read_page;
 
 	sunserial_console_match(&sunhv_console, op->node,
-				&sunhv_reg, port->line);
+				&sunhv_reg, port->line, false);
 
 	err = uart_add_one_port(&sunhv_reg, port);
 	if (err)
diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c
index d1ad34128635..d514e28d0755 100644
--- a/drivers/serial/sunsab.c
+++ b/drivers/serial/sunsab.c
@@ -883,7 +883,7 @@ static int sunsab_console_setup(struct console *con, char *options)
 	printk("Console: ttyS%d (SAB82532)\n",
 	       (sunsab_reg.minor - 64) + con->index);
 
-	sunserial_console_termios(con);
+	sunserial_console_termios(con, to_of_device(up->port.dev)->node);
 
 	switch (con->cflag & CBAUD) {
 	case B150: baud = 150; break;
@@ -1027,10 +1027,12 @@ static int __devinit sab_probe(struct of_device *op, const struct of_device_id *
 		goto out1;
 
 	sunserial_console_match(SUNSAB_CONSOLE(), op->node,
-				&sunsab_reg, up[0].port.line);
+				&sunsab_reg, up[0].port.line,
+				false);
 
 	sunserial_console_match(SUNSAB_CONSOLE(), op->node,
-				&sunsab_reg, up[1].port.line);
+				&sunsab_reg, up[1].port.line,
+				false);
 
 	err = uart_add_one_port(&sunsab_reg, &up[0].port);
 	if (err)
@@ -1116,7 +1118,6 @@ static int __init sunsab_init(void)
 		if (!sunsab_ports)
 			return -ENOMEM;
 
-		sunsab_reg.cons = SUNSAB_CONSOLE();
 		err = sunserial_register_minors(&sunsab_reg, num_channels);
 		if (err) {
 			kfree(sunsab_ports);
diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c
index 68d262b15749..170d3d68c8f0 100644
--- a/drivers/serial/sunsu.c
+++ b/drivers/serial/sunsu.c
@@ -1329,11 +1329,9 @@ static void sunsu_console_write(struct console *co, const char *s,
  */
 static int __init sunsu_console_setup(struct console *co, char *options)
 {
+	static struct ktermios dummy;
+	struct ktermios termios;
 	struct uart_port *port;
-	int baud = 9600;
-	int bits = 8;
-	int parity = 'n';
-	int flow = 'n';
 
 	printk("Console: ttyS%d (SU)\n",
 	       (sunsu_reg.minor - 64) + co->index);
@@ -1352,10 +1350,15 @@ static int __init sunsu_console_setup(struct console *co, char *options)
 	 */
 	spin_lock_init(&port->lock);
 
-	if (options)
-		uart_parse_options(options, &baud, &parity, &bits, &flow);
+	/* Get firmware console settings.  */
+	sunserial_console_termios(co, to_of_device(port->dev)->node);
 
-	return uart_set_options(port, co, baud, parity, bits, flow);
+	memset(&termios, 0, sizeof(struct ktermios));
+	termios.c_cflag = co->cflag;
+	port->mctrl |= TIOCM_DTR;
+	port->ops->set_termios(port, &termios, &dummy);
+
+	return 0;
 }
 
 static struct console sunsu_console = {
@@ -1409,6 +1412,7 @@ static int __devinit su_probe(struct of_device *op, const struct of_device_id *m
 	struct uart_sunsu_port *up;
 	struct resource *rp;
 	enum su_type type;
+	bool ignore_line;
 	int err;
 
 	type = su_get_type(dp);
@@ -1467,8 +1471,14 @@ static int __devinit su_probe(struct of_device *op, const struct of_device_id *m
 
 	up->port.ops = &sunsu_pops;
 
+	ignore_line = false;
+	if (!strcmp(dp->name, "rsc-console") ||
+	    !strcmp(dp->name, "lom-console"))
+		ignore_line = true;
+
 	sunserial_console_match(SUNSU_CONSOLE(), dp,
-				&sunsu_reg, up->port.line);
+				&sunsu_reg, up->port.line,
+				ignore_line);
 	err = uart_add_one_port(&sunsu_reg, &up->port);
 	if (err)
 		goto out_unmap;
@@ -1517,6 +1527,10 @@ static const struct of_device_id su_match[] = {
 		.name = "serial",
 		.compatible = "su",
 	},
+	{
+		.type = "serial",
+		.compatible = "su",
+	},
 	{},
 };
 MODULE_DEVICE_TABLE(of, su_match);
@@ -1548,6 +1562,12 @@ static int __init sunsu_init(void)
 				num_uart++;
 		}
 	}
+	for_each_node_by_type(dp, "serial") {
+		if (of_device_is_compatible(dp, "su")) {
+			if (su_get_type(dp) == SU_PORT_PORT)
+				num_uart++;
+		}
+	}
 
 	if (num_uart) {
 		err = sunserial_register_minors(&sunsu_reg, num_uart);
diff --git a/drivers/serial/sunzilog.c b/drivers/serial/sunzilog.c
index ef693ae22e7f..2c7a66af4f52 100644
--- a/drivers/serial/sunzilog.c
+++ b/drivers/serial/sunzilog.c
@@ -1180,7 +1180,7 @@ static int __init sunzilog_console_setup(struct console *con, char *options)
 	       (sunzilog_reg.minor - 64) + con->index, con->index);
 
 	/* Get firmware console settings.  */
-	sunserial_console_termios(con);
+	sunserial_console_termios(con, to_of_device(up->port.dev)->node);
 
 	/* Firmware console speed is limited to 150-->38400 baud so
 	 * this hackish cflag thing is OK.
@@ -1416,7 +1416,8 @@ static int __devinit zs_probe(struct of_device *op, const struct of_device_id *m
 
 	if (!keyboard_mouse) {
 		if (sunserial_console_match(SUNZILOG_CONSOLE(), op->node,
-					    &sunzilog_reg, up[0].port.line))
+					    &sunzilog_reg, up[0].port.line,
+					    false))
 			up->flags |= SUNZILOG_FLAG_IS_CONS;
 		err = uart_add_one_port(&sunzilog_reg, &up[0].port);
 		if (err) {
@@ -1425,7 +1426,8 @@ static int __devinit zs_probe(struct of_device *op, const struct of_device_id *m
 			return err;
 		}
 		if (sunserial_console_match(SUNZILOG_CONSOLE(), op->node,
-					    &sunzilog_reg, up[1].port.line))
+					    &sunzilog_reg, up[1].port.line,
+					    false))
 			up->flags |= SUNZILOG_FLAG_IS_CONS;
 		err = uart_add_one_port(&sunzilog_reg, &up[1].port);
 		if (err) {