summaryrefslogtreecommitdiff
path: root/drivers/serial
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/serial')
-rw-r--r--drivers/serial/68360serial.c6
-rw-r--r--drivers/serial/8250.c13
-rw-r--r--drivers/serial/Kconfig8
-rw-r--r--drivers/serial/amba-pl010.c2
-rw-r--r--drivers/serial/amba-pl011.c90
-rw-r--r--drivers/serial/cpm_uart/cpm_uart_core.c2
-rw-r--r--drivers/serial/kgdboc.c18
-rw-r--r--drivers/serial/mpc52xx_uart.c145
-rw-r--r--drivers/serial/nwpserial.c2
-rw-r--r--drivers/serial/sh-sci.c42
-rw-r--r--drivers/serial/sh-sci.h29
-rw-r--r--drivers/serial/sn_console.c6
-rw-r--r--drivers/serial/sunhv.c8
-rw-r--r--drivers/serial/sunsab.c6
-rw-r--r--drivers/serial/sunsu.c4
-rw-r--r--drivers/serial/sunzilog.c16
-rw-r--r--drivers/serial/uartlite.c1
17 files changed, 297 insertions, 101 deletions
diff --git a/drivers/serial/68360serial.c b/drivers/serial/68360serial.c
index 24661cd5e4fb..768612f8e41e 100644
--- a/drivers/serial/68360serial.c
+++ b/drivers/serial/68360serial.c
@@ -2649,7 +2649,7 @@ static int __init rs_360_init(void)
sup->tfcr = SMC_EB;
/* Set this to 1 for now, so we get single
- * character interrupts. Using idle charater
+ * character interrupts. Using idle character
* time requires some additional tuning.
*/
sup->mrblr = 1;
@@ -2728,7 +2728,7 @@ static int __init rs_360_init(void)
up->tfcr = SMC_EB;
/* Set this to 1 for now, so we get single
- * character interrupts. Using idle charater
+ * character interrupts. Using idle character
* time requires some additional tuning.
*/
up->mrblr = 1;
@@ -2886,7 +2886,7 @@ int serial_console_setup( struct console *co, char *options)
sup->tfcr = SMC_EB;
/* Set this to 1 for now, so we get single
- * character interrupts. Using idle charater
+ * character interrupts. Using idle character
* time requires some additional tuning.
*/
sup->mrblr = 1;
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 891e1dd65f24..09ef57034c9c 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -302,7 +302,7 @@ static const struct serial8250_config uart_config[] = {
},
};
-#if defined (CONFIG_SERIAL_8250_AU1X00)
+#if defined(CONFIG_MIPS_ALCHEMY)
/* Au1x00 UART hardware has a weird register layout */
static const u8 au_io_in_map[] = {
@@ -422,7 +422,6 @@ static unsigned int mem32_serial_in(struct uart_port *p, int offset)
return readl(p->membase + offset);
}
-#ifdef CONFIG_SERIAL_8250_AU1X00
static unsigned int au_serial_in(struct uart_port *p, int offset)
{
offset = map_8250_in_reg(p, offset) << p->regshift;
@@ -434,7 +433,6 @@ static void au_serial_out(struct uart_port *p, int offset, int value)
offset = map_8250_out_reg(p, offset) << p->regshift;
__raw_writel(value, p->membase + offset);
}
-#endif
static unsigned int tsi_serial_in(struct uart_port *p, int offset)
{
@@ -503,12 +501,11 @@ static void set_io_from_upio(struct uart_port *p)
p->serial_out = mem32_serial_out;
break;
-#ifdef CONFIG_SERIAL_8250_AU1X00
case UPIO_AU:
p->serial_in = au_serial_in;
p->serial_out = au_serial_out;
break;
-#endif
+
case UPIO_TSI:
p->serial_in = tsi_serial_in;
p->serial_out = tsi_serial_out;
@@ -535,9 +532,7 @@ serial_out_sync(struct uart_8250_port *up, int offset, int value)
switch (p->iotype) {
case UPIO_MEM:
case UPIO_MEM32:
-#ifdef CONFIG_SERIAL_8250_AU1X00
case UPIO_AU:
-#endif
case UPIO_DWAPB:
p->serial_out(p, offset, value);
p->serial_in(p, UART_LCR); /* safe, no side-effects */
@@ -573,7 +568,7 @@ static inline void _serial_dl_write(struct uart_8250_port *up, int value)
serial_outp(up, UART_DLM, value >> 8 & 0xff);
}
-#if defined(CONFIG_SERIAL_8250_AU1X00)
+#if defined(CONFIG_MIPS_ALCHEMY)
/* Au1x00 haven't got a standard divisor latch */
static int serial_dl_read(struct uart_8250_port *up)
{
@@ -2596,11 +2591,9 @@ static void serial8250_config_port(struct uart_port *port, int flags)
if (flags & UART_CONFIG_TYPE)
autoconfig(up, probeflags);
-#ifdef CONFIG_SERIAL_8250_AU1X00
/* if access method is AU, it is a 16550 with a quirk */
if (up->port.type == PORT_16550A && up->port.iotype == UPIO_AU)
up->bugs |= UART_BUG_NOMSR;
-#endif
if (up->port.type != PORT_UNKNOWN && flags & UART_CONFIG_IRQ)
autoconfig_irq(up);
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index aa220108cece..8f23eb54f498 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -258,14 +258,6 @@ config SERIAL_8250_ACORN
system, say Y to this option. The driver can handle 1, 2, or 3 port
cards. If unsure, say N.
-config SERIAL_8250_AU1X00
- bool "Au1x00 serial port support"
- depends on SERIAL_8250 != n && SOC_AU1X00
- help
- If you have an Au1x00 SOC based board and want to use the serial port,
- say Y to this option. The driver can handle up to 4 serial ports,
- depending on the SOC. If unsure, say N.
-
config SERIAL_8250_RM9K
bool "Support for MIPS RM9xxx integrated serial port"
depends on SERIAL_8250 != n && SERIAL_RM9000
diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c
index b09a638d051f..50441ffe8e38 100644
--- a/drivers/serial/amba-pl010.c
+++ b/drivers/serial/amba-pl010.c
@@ -782,7 +782,7 @@ static int pl010_resume(struct amba_device *dev)
return 0;
}
-static struct amba_id pl010_ids[] __initdata = {
+static struct amba_id pl010_ids[] = {
{
.id = 0x00041010,
.mask = 0x000fffff,
diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c
index eb4cb480b93e..6ca7a44f29c2 100644
--- a/drivers/serial/amba-pl011.c
+++ b/drivers/serial/amba-pl011.c
@@ -69,9 +69,12 @@
struct uart_amba_port {
struct uart_port port;
struct clk *clk;
- unsigned int im; /* interrupt mask */
+ unsigned int im; /* interrupt mask */
unsigned int old_status;
- unsigned int ifls; /* vendor-specific */
+ unsigned int ifls; /* vendor-specific */
+ unsigned int lcrh_tx; /* vendor-specific */
+ unsigned int lcrh_rx; /* vendor-specific */
+ bool oversampling; /* vendor-specific */
bool autorts;
};
@@ -79,16 +82,25 @@ struct uart_amba_port {
struct vendor_data {
unsigned int ifls;
unsigned int fifosize;
+ unsigned int lcrh_tx;
+ unsigned int lcrh_rx;
+ bool oversampling;
};
static struct vendor_data vendor_arm = {
.ifls = UART011_IFLS_RX4_8|UART011_IFLS_TX4_8,
.fifosize = 16,
+ .lcrh_tx = UART011_LCRH,
+ .lcrh_rx = UART011_LCRH,
+ .oversampling = false,
};
static struct vendor_data vendor_st = {
.ifls = UART011_IFLS_RX_HALF|UART011_IFLS_TX_HALF,
.fifosize = 64,
+ .lcrh_tx = ST_UART011_LCRH_TX,
+ .lcrh_rx = ST_UART011_LCRH_RX,
+ .oversampling = true,
};
static void pl011_stop_tx(struct uart_port *port)
@@ -327,12 +339,12 @@ static void pl011_break_ctl(struct uart_port *port, int break_state)
unsigned int lcr_h;
spin_lock_irqsave(&uap->port.lock, flags);
- lcr_h = readw(uap->port.membase + UART011_LCRH);
+ lcr_h = readw(uap->port.membase + uap->lcrh_tx);
if (break_state == -1)
lcr_h |= UART01x_LCRH_BRK;
else
lcr_h &= ~UART01x_LCRH_BRK;
- writew(lcr_h, uap->port.membase + UART011_LCRH);
+ writew(lcr_h, uap->port.membase + uap->lcrh_tx);
spin_unlock_irqrestore(&uap->port.lock, flags);
}
@@ -393,7 +405,17 @@ static int pl011_startup(struct uart_port *port)
writew(cr, uap->port.membase + UART011_CR);
writew(0, uap->port.membase + UART011_FBRD);
writew(1, uap->port.membase + UART011_IBRD);
- writew(0, uap->port.membase + UART011_LCRH);
+ writew(0, uap->port.membase + uap->lcrh_rx);
+ if (uap->lcrh_tx != uap->lcrh_rx) {
+ int i;
+ /*
+ * Wait 10 PCLKs before writing LCRH_TX register,
+ * to get this delay write read only register 10 times
+ */
+ for (i = 0; i < 10; ++i)
+ writew(0xff, uap->port.membase + UART011_MIS);
+ writew(0, uap->port.membase + uap->lcrh_tx);
+ }
writew(0, uap->port.membase + UART01x_DR);
while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_BUSY)
barrier();
@@ -422,10 +444,19 @@ static int pl011_startup(struct uart_port *port)
return retval;
}
+static void pl011_shutdown_channel(struct uart_amba_port *uap,
+ unsigned int lcrh)
+{
+ unsigned long val;
+
+ val = readw(uap->port.membase + lcrh);
+ val &= ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN);
+ writew(val, uap->port.membase + lcrh);
+}
+
static void pl011_shutdown(struct uart_port *port)
{
struct uart_amba_port *uap = (struct uart_amba_port *)port;
- unsigned long val;
/*
* disable all interrupts
@@ -450,9 +481,9 @@ static void pl011_shutdown(struct uart_port *port)
/*
* disable break condition and fifos
*/
- val = readw(uap->port.membase + UART011_LCRH);
- val &= ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN);
- writew(val, uap->port.membase + UART011_LCRH);
+ pl011_shutdown_channel(uap, uap->lcrh_rx);
+ if (uap->lcrh_rx != uap->lcrh_tx)
+ pl011_shutdown_channel(uap, uap->lcrh_tx);
/*
* Shut down the clock producer
@@ -472,8 +503,13 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios,
/*
* Ask the core to calculate the divisor for us.
*/
- baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
- quot = port->uartclk * 4 / baud;
+ baud = uart_get_baud_rate(port, termios, old, 0,
+ port->uartclk/(uap->oversampling ? 8 : 16));
+
+ if (baud > port->uartclk/16)
+ quot = DIV_ROUND_CLOSEST(port->uartclk * 8, baud);
+ else
+ quot = DIV_ROUND_CLOSEST(port->uartclk * 4, baud);
switch (termios->c_cflag & CSIZE) {
case CS5:
@@ -552,6 +588,13 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios,
uap->autorts = false;
}
+ if (uap->oversampling) {
+ if (baud > port->uartclk/16)
+ old_cr |= ST_UART011_CR_OVSFACT;
+ else
+ old_cr &= ~ST_UART011_CR_OVSFACT;
+ }
+
/* Set baud rate */
writew(quot & 0x3f, port->membase + UART011_FBRD);
writew(quot >> 6, port->membase + UART011_IBRD);
@@ -561,7 +604,17 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios,
* NOTE: MUST BE WRITTEN AFTER UARTLCR_M & UARTLCR_L
* ----------^----------^----------^----------^-----
*/
- writew(lcr_h, port->membase + UART011_LCRH);
+ writew(lcr_h, port->membase + uap->lcrh_rx);
+ if (uap->lcrh_rx != uap->lcrh_tx) {
+ int i;
+ /*
+ * Wait 10 PCLKs before writing LCRH_TX register,
+ * to get this delay write read only register 10 times
+ */
+ for (i = 0; i < 10; ++i)
+ writew(0xff, uap->port.membase + UART011_MIS);
+ writew(lcr_h, port->membase + uap->lcrh_tx);
+ }
writew(old_cr, port->membase + UART011_CR);
spin_unlock_irqrestore(&port->lock, flags);
@@ -688,7 +741,7 @@ pl011_console_get_options(struct uart_amba_port *uap, int *baud,
if (readw(uap->port.membase + UART011_CR) & UART01x_CR_UARTEN) {
unsigned int lcr_h, ibrd, fbrd;
- lcr_h = readw(uap->port.membase + UART011_LCRH);
+ lcr_h = readw(uap->port.membase + uap->lcrh_tx);
*parity = 'n';
if (lcr_h & UART01x_LCRH_PEN) {
@@ -707,6 +760,12 @@ pl011_console_get_options(struct uart_amba_port *uap, int *baud,
fbrd = readw(uap->port.membase + UART011_FBRD);
*baud = uap->port.uartclk * 4 / (64 * ibrd + fbrd);
+
+ if (uap->oversampling) {
+ if (readw(uap->port.membase + UART011_CR)
+ & ST_UART011_CR_OVSFACT)
+ *baud *= 2;
+ }
}
}
@@ -800,6 +859,9 @@ static int pl011_probe(struct amba_device *dev, struct amba_id *id)
}
uap->ifls = vendor->ifls;
+ uap->lcrh_rx = vendor->lcrh_rx;
+ uap->lcrh_tx = vendor->lcrh_tx;
+ uap->oversampling = vendor->oversampling;
uap->port.dev = &dev->dev;
uap->port.mapbase = dev->res.start;
uap->port.membase = base;
@@ -868,7 +930,7 @@ static int pl011_resume(struct amba_device *dev)
}
#endif
-static struct amba_id pl011_ids[] __initdata = {
+static struct amba_id pl011_ids[] = {
{
.id = 0x00041011,
.mask = 0x000fffff,
diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c
index cd6cf575902e..6016179db533 100644
--- a/drivers/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/serial/cpm_uart/cpm_uart_core.c
@@ -852,7 +852,7 @@ static void cpm_uart_init_smc(struct uart_cpm_port *pinfo)
*/
cpm_set_smc_fcr(up);
- /* Using idle charater time requires some additional tuning. */
+ /* Using idle character time requires some additional tuning. */
out_be16(&up->smc_mrblr, pinfo->rx_fifosize);
out_be16(&up->smc_maxidl, pinfo->rx_fifosize);
out_be16(&up->smc_brklen, 0);
diff --git a/drivers/serial/kgdboc.c b/drivers/serial/kgdboc.c
index a9a94ae72349..39f9a1adaa75 100644
--- a/drivers/serial/kgdboc.c
+++ b/drivers/serial/kgdboc.c
@@ -17,6 +17,7 @@
#include <linux/kdb.h>
#include <linux/tty.h>
#include <linux/console.h>
+#include <linux/vt_kern.h>
#define MAX_CONFIG_LEN 40
@@ -31,6 +32,7 @@ static struct kparam_string kps = {
.maxlen = MAX_CONFIG_LEN,
};
+static int kgdboc_use_kms; /* 1 if we use kernel mode switching */
static struct tty_driver *kgdb_tty_driver;
static int kgdb_tty_line;
@@ -104,6 +106,12 @@ static int configure_kgdboc(void)
kgdboc_io_ops.is_console = 0;
kgdb_tty_driver = NULL;
+ kgdboc_use_kms = 0;
+ if (strncmp(cptr, "kms,", 4) == 0) {
+ cptr += 4;
+ kgdboc_use_kms = 1;
+ }
+
if (kgdboc_register_kbd(&cptr))
goto do_register;
@@ -201,8 +209,14 @@ static int param_set_kgdboc_var(const char *kmessage, struct kernel_param *kp)
return configure_kgdboc();
}
+static int dbg_restore_graphics;
+
static void kgdboc_pre_exp_handler(void)
{
+ if (!dbg_restore_graphics && kgdboc_use_kms) {
+ dbg_restore_graphics = 1;
+ con_debug_enter(vc_cons[fg_console].d);
+ }
/* Increment the module count when the debugger is active */
if (!kgdb_connected)
try_module_get(THIS_MODULE);
@@ -213,6 +227,10 @@ static void kgdboc_post_exp_handler(void)
/* decrement the module count when the debugger detaches */
if (!kgdb_connected)
module_put(THIS_MODULE);
+ if (kgdboc_use_kms && dbg_restore_graphics) {
+ dbg_restore_graphics = 0;
+ con_debug_leave();
+ }
}
static struct kgdb_io kgdboc_io_ops = {
diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c
index 84a35f699016..1a88b363005c 100644
--- a/drivers/serial/mpc52xx_uart.c
+++ b/drivers/serial/mpc52xx_uart.c
@@ -113,7 +113,9 @@ struct psc_ops {
unsigned char (*read_char)(struct uart_port *port);
void (*cw_disable_ints)(struct uart_port *port);
void (*cw_restore_ints)(struct uart_port *port);
- unsigned long (*getuartclk)(void *p);
+ unsigned int (*set_baudrate)(struct uart_port *port,
+ struct ktermios *new,
+ struct ktermios *old);
int (*clock)(struct uart_port *port, int enable);
int (*fifoc_init)(void);
void (*fifoc_uninit)(void);
@@ -121,6 +123,16 @@ struct psc_ops {
irqreturn_t (*handle_irq)(struct uart_port *port);
};
+/* setting the prescaler and divisor reg is common for all chips */
+static inline void mpc52xx_set_divisor(struct mpc52xx_psc __iomem *psc,
+ u16 prescaler, unsigned int divisor)
+{
+ /* select prescaler */
+ out_be16(&psc->mpc52xx_psc_clock_select, prescaler);
+ out_8(&psc->ctur, divisor >> 8);
+ out_8(&psc->ctlr, divisor & 0xff);
+}
+
#ifdef CONFIG_PPC_MPC52xx
#define FIFO_52xx(port) ((struct mpc52xx_psc_fifo __iomem *)(PSC(port)+1))
static void mpc52xx_psc_fifo_init(struct uart_port *port)
@@ -128,9 +140,6 @@ static void mpc52xx_psc_fifo_init(struct uart_port *port)
struct mpc52xx_psc __iomem *psc = PSC(port);
struct mpc52xx_psc_fifo __iomem *fifo = FIFO_52xx(port);
- /* /32 prescaler */
- out_be16(&psc->mpc52xx_psc_clock_select, 0xdd00);
-
out_8(&fifo->rfcntl, 0x00);
out_be16(&fifo->rfalarm, 0x1ff);
out_8(&fifo->tfcntl, 0x07);
@@ -219,15 +228,47 @@ static void mpc52xx_psc_cw_restore_ints(struct uart_port *port)
out_be16(&PSC(port)->mpc52xx_psc_imr, port->read_status_mask);
}
-/* Search for bus-frequency property in this node or a parent */
-static unsigned long mpc52xx_getuartclk(void *p)
+static unsigned int mpc5200_psc_set_baudrate(struct uart_port *port,
+ struct ktermios *new,
+ struct ktermios *old)
{
- /*
- * 5200 UARTs have a / 32 prescaler
- * but the generic serial code assumes 16
- * so return ipb freq / 2
- */
- return mpc5xxx_get_bus_frequency(p) / 2;
+ unsigned int baud;
+ unsigned int divisor;
+
+ /* The 5200 has a fixed /32 prescaler, uartclk contains the ipb freq */
+ baud = uart_get_baud_rate(port, new, old,
+ port->uartclk / (32 * 0xffff) + 1,
+ port->uartclk / 32);
+ divisor = (port->uartclk + 16 * baud) / (32 * baud);
+
+ /* enable the /32 prescaler and set the divisor */
+ mpc52xx_set_divisor(PSC(port), 0xdd00, divisor);
+ return baud;
+}
+
+static unsigned int mpc5200b_psc_set_baudrate(struct uart_port *port,
+ struct ktermios *new,
+ struct ktermios *old)
+{
+ unsigned int baud;
+ unsigned int divisor;
+ u16 prescaler;
+
+ /* The 5200B has a selectable /4 or /32 prescaler, uartclk contains the
+ * ipb freq */
+ baud = uart_get_baud_rate(port, new, old,
+ port->uartclk / (32 * 0xffff) + 1,
+ port->uartclk / 4);
+ divisor = (port->uartclk + 2 * baud) / (4 * baud);
+
+ /* select the proper prescaler and set the divisor */
+ if (divisor > 0xffff) {
+ divisor = (divisor + 4) / 8;
+ prescaler = 0xdd00; /* /32 */
+ } else
+ prescaler = 0xff00; /* /4 */
+ mpc52xx_set_divisor(PSC(port), prescaler, divisor);
+ return baud;
}
static void mpc52xx_psc_get_irq(struct uart_port *port, struct device_node *np)
@@ -258,7 +299,28 @@ static struct psc_ops mpc52xx_psc_ops = {
.read_char = mpc52xx_psc_read_char,
.cw_disable_ints = mpc52xx_psc_cw_disable_ints,
.cw_restore_ints = mpc52xx_psc_cw_restore_ints,
- .getuartclk = mpc52xx_getuartclk,
+ .set_baudrate = mpc5200_psc_set_baudrate,
+ .get_irq = mpc52xx_psc_get_irq,
+ .handle_irq = mpc52xx_psc_handle_irq,
+};
+
+static struct psc_ops mpc5200b_psc_ops = {
+ .fifo_init = mpc52xx_psc_fifo_init,
+ .raw_rx_rdy = mpc52xx_psc_raw_rx_rdy,
+ .raw_tx_rdy = mpc52xx_psc_raw_tx_rdy,
+ .rx_rdy = mpc52xx_psc_rx_rdy,
+ .tx_rdy = mpc52xx_psc_tx_rdy,
+ .tx_empty = mpc52xx_psc_tx_empty,
+ .stop_rx = mpc52xx_psc_stop_rx,
+ .start_tx = mpc52xx_psc_start_tx,
+ .stop_tx = mpc52xx_psc_stop_tx,
+ .rx_clr_irq = mpc52xx_psc_rx_clr_irq,
+ .tx_clr_irq = mpc52xx_psc_tx_clr_irq,
+ .write_char = mpc52xx_psc_write_char,
+ .read_char = mpc52xx_psc_read_char,
+ .cw_disable_ints = mpc52xx_psc_cw_disable_ints,
+ .cw_restore_ints = mpc52xx_psc_cw_restore_ints,
+ .set_baudrate = mpc5200b_psc_set_baudrate,
.get_irq = mpc52xx_psc_get_irq,
.handle_irq = mpc52xx_psc_handle_irq,
};
@@ -392,9 +454,35 @@ static void mpc512x_psc_cw_restore_ints(struct uart_port *port)
out_be32(&FIFO_512x(port)->rximr, port->read_status_mask & 0x7f);
}
-static unsigned long mpc512x_getuartclk(void *p)
+static unsigned int mpc512x_psc_set_baudrate(struct uart_port *port,
+ struct ktermios *new,
+ struct ktermios *old)
{
- return mpc5xxx_get_bus_frequency(p);
+ unsigned int baud;
+ unsigned int divisor;
+
+ /*
+ * The "MPC5121e Microcontroller Reference Manual, Rev. 3" says on
+ * pg. 30-10 that the chip supports a /32 and a /10 prescaler.
+ * Furthermore, it states that "After reset, the prescaler by 10
+ * for the UART mode is selected", but the reset register value is
+ * 0x0000 which means a /32 prescaler. This is wrong.
+ *
+ * In reality using /32 prescaler doesn't work, as it is not supported!
+ * Use /16 or /10 prescaler, see "MPC5121e Hardware Design Guide",
+ * Chapter 4.1 PSC in UART Mode.
+ * Calculate with a /16 prescaler here.
+ */
+
+ /* uartclk contains the ips freq */
+ baud = uart_get_baud_rate(port, new, old,
+ port->uartclk / (16 * 0xffff) + 1,
+ port->uartclk / 16);
+ divisor = (port->uartclk + 8 * baud) / (16 * baud);
+
+ /* enable the /16 prescaler and set the divisor */
+ mpc52xx_set_divisor(PSC(port), 0xdd00, divisor);
+ return baud;
}
/* Init PSC FIFO Controller */
@@ -498,7 +586,7 @@ static struct psc_ops mpc512x_psc_ops = {
.read_char = mpc512x_psc_read_char,
.cw_disable_ints = mpc512x_psc_cw_disable_ints,
.cw_restore_ints = mpc512x_psc_cw_restore_ints,
- .getuartclk = mpc512x_getuartclk,
+ .set_baudrate = mpc512x_psc_set_baudrate,
.clock = mpc512x_psc_clock,
.fifoc_init = mpc512x_psc_fifoc_init,
.fifoc_uninit = mpc512x_psc_fifoc_uninit,
@@ -666,8 +754,8 @@ mpc52xx_uart_set_termios(struct uart_port *port, struct ktermios *new,
struct mpc52xx_psc __iomem *psc = PSC(port);
unsigned long flags;
unsigned char mr1, mr2;
- unsigned short ctr;
- unsigned int j, baud, quot;
+ unsigned int j;
+ unsigned int baud;
/* Prepare what we're gonna write */
mr1 = 0;
@@ -704,16 +792,9 @@ mpc52xx_uart_set_termios(struct uart_port *port, struct ktermios *new,
mr2 |= MPC52xx_PSC_MODE_TXCTS;
}
- baud = uart_get_baud_rate(port, new, old, 0, port->uartclk/16);
- quot = uart_get_divisor(port, baud);
- ctr = quot & 0xffff;
-
/* Get the lock */
spin_lock_irqsave(&port->lock, flags);
- /* Update the per-port timeout */
- uart_update_timeout(port, new->c_cflag, baud);
-
/* Do our best to flush TX & RX, so we don't lose anything */
/* But we don't wait indefinitely ! */
j = 5000000; /* Maximum wait */
@@ -737,8 +818,10 @@ mpc52xx_uart_set_termios(struct uart_port *port, struct ktermios *new,
out_8(&psc->command, MPC52xx_PSC_SEL_MODE_REG_1);
out_8(&psc->mode, mr1);
out_8(&psc->mode, mr2);
- out_8(&psc->ctur, ctr >> 8);
- out_8(&psc->ctlr, ctr & 0xff);
+ baud = psc_ops->set_baudrate(port, new, old);
+
+ /* Update the per-port timeout */
+ uart_update_timeout(port, new->c_cflag, baud);
if (UART_ENABLE_MS(port, new->c_cflag))
mpc52xx_uart_enable_ms(port);
@@ -1118,7 +1201,7 @@ mpc52xx_console_setup(struct console *co, char *options)
return ret;
}
- uartclk = psc_ops->getuartclk(np);
+ uartclk = mpc5xxx_get_bus_frequency(np);
if (uartclk == 0) {
pr_debug("Could not find uart clock frequency!\n");
return -EINVAL;
@@ -1201,6 +1284,7 @@ static struct uart_driver mpc52xx_uart_driver = {
static struct of_device_id mpc52xx_uart_of_match[] = {
#ifdef CONFIG_PPC_MPC52xx
+ { .compatible = "fsl,mpc5200b-psc-uart", .data = &mpc5200b_psc_ops, },
{ .compatible = "fsl,mpc5200-psc-uart", .data = &mpc52xx_psc_ops, },
/* binding used by old lite5200 device trees: */
{ .compatible = "mpc5200-psc-uart", .data = &mpc52xx_psc_ops, },
@@ -1233,7 +1317,10 @@ mpc52xx_uart_of_probe(struct of_device *op, const struct of_device_id *match)
pr_debug("Found %s assigned to ttyPSC%x\n",
mpc52xx_uart_nodes[idx]->full_name, idx);
- uartclk = psc_ops->getuartclk(op->dev.of_node);
+ /* set the uart clock to the input clock of the psc, the different
+ * prescalers are taken into account in the set_baudrate() methods
+ * of the respective chip */
+ uartclk = mpc5xxx_get_bus_frequency(op->dev.of_node);
if (uartclk == 0) {
dev_dbg(&op->dev, "Could not find uart clock frequency!\n");
return -EINVAL;
diff --git a/drivers/serial/nwpserial.c b/drivers/serial/nwpserial.c
index 3c02fa96f282..e65b0d9202a5 100644
--- a/drivers/serial/nwpserial.c
+++ b/drivers/serial/nwpserial.c
@@ -81,7 +81,7 @@ nwpserial_console_write(struct console *co, const char *s, unsigned int count)
uart_console_write(&up->port, s, count, nwpserial_console_putchar);
- /* wait for transmitter to become emtpy */
+ /* wait for transmitter to become empty */
while ((dcr_read(up->dcr_host, UART_LSR) & UART_LSR_THRE) == 0)
cpu_relax();
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index 5f90fcd7d107..c291b3add1d2 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -346,6 +346,27 @@ static int scif_rxfill(struct uart_port *port)
return sci_in(port, SCFDR) & SCIF2_RFDC_MASK;
}
}
+#elif defined(CONFIG_ARCH_SH7372)
+static int scif_txfill(struct uart_port *port)
+{
+ if (port->type == PORT_SCIFA)
+ return sci_in(port, SCFDR) >> 8;
+ else
+ return sci_in(port, SCTFDR);
+}
+
+static int scif_txroom(struct uart_port *port)
+{
+ return port->fifosize - scif_txfill(port);
+}
+
+static int scif_rxfill(struct uart_port *port)
+{
+ if (port->type == PORT_SCIFA)
+ return sci_in(port, SCFDR) & SCIF_RFDC_MASK;
+ else
+ return sci_in(port, SCRFDR);
+}
#else
static int scif_txfill(struct uart_port *port)
{
@@ -683,7 +704,7 @@ static irqreturn_t sci_rx_interrupt(int irq, void *ptr)
u16 ssr = sci_in(port, SCxSR);
/* Disable future Rx interrupts */
- if (port->type == PORT_SCIFA) {
+ if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
disable_irq_nosync(irq);
scr |= 0x4000;
} else {
@@ -928,7 +949,7 @@ static void sci_dma_tx_complete(void *arg)
if (!uart_circ_empty(xmit)) {
schedule_work(&s->work_tx);
- } else if (port->type == PORT_SCIFA) {
+ } else if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
u16 ctrl = sci_in(port, SCSCR);
sci_out(port, SCSCR, ctrl & ~SCI_CTRL_FLAGS_TIE);
}
@@ -1184,7 +1205,7 @@ static void sci_start_tx(struct uart_port *port)
unsigned short ctrl;
#ifdef CONFIG_SERIAL_SH_SCI_DMA
- if (port->type == PORT_SCIFA) {
+ if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
u16 new, scr = sci_in(port, SCSCR);
if (s->chan_tx)
new = scr | 0x8000;
@@ -1197,7 +1218,7 @@ static void sci_start_tx(struct uart_port *port)
s->cookie_tx < 0)
schedule_work(&s->work_tx);
#endif
- if (!s->chan_tx || port->type == PORT_SCIFA) {
+ if (!s->chan_tx || port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
/* Set TIE (Transmit Interrupt Enable) bit in SCSCR */
ctrl = sci_in(port, SCSCR);
sci_out(port, SCSCR, ctrl | SCI_CTRL_FLAGS_TIE);
@@ -1210,7 +1231,7 @@ static void sci_stop_tx(struct uart_port *port)
/* Clear TIE (Transmit Interrupt Enable) bit in SCSCR */
ctrl = sci_in(port, SCSCR);
- if (port->type == PORT_SCIFA)
+ if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
ctrl &= ~0x8000;
ctrl &= ~SCI_CTRL_FLAGS_TIE;
sci_out(port, SCSCR, ctrl);
@@ -1222,7 +1243,7 @@ static void sci_start_rx(struct uart_port *port)
/* Set RIE (Receive Interrupt Enable) bit in SCSCR */
ctrl |= sci_in(port, SCSCR);
- if (port->type == PORT_SCIFA)
+ if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
ctrl &= ~0x4000;
sci_out(port, SCSCR, ctrl);
}
@@ -1233,7 +1254,7 @@ static void sci_stop_rx(struct uart_port *port)
/* Clear RIE (Receive Interrupt Enable) bit in SCSCR */
ctrl = sci_in(port, SCSCR);
- if (port->type == PORT_SCIFA)
+ if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
ctrl &= ~0x4000;
ctrl &= ~(SCI_CTRL_FLAGS_RIE | SCI_CTRL_FLAGS_REIE);
sci_out(port, SCSCR, ctrl);
@@ -1271,7 +1292,7 @@ static void rx_timer_fn(unsigned long arg)
struct uart_port *port = &s->port;
u16 scr = sci_in(port, SCSCR);
- if (port->type == PORT_SCIFA) {
+ if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
scr &= ~0x4000;
enable_irq(s->irqs[1]);
}
@@ -1524,6 +1545,8 @@ static const char *sci_type(struct uart_port *port)
return "scif";
case PORT_SCIFA:
return "scifa";
+ case PORT_SCIFB:
+ return "scifb";
}
return NULL;
@@ -1612,6 +1635,9 @@ static int __devinit sci_init_single(struct platform_device *dev,
port->line = index;
switch (p->type) {
+ case PORT_SCIFB:
+ port->fifosize = 256;
+ break;
case PORT_SCIFA:
port->fifosize = 64;
break;
diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h
index f70c49f915fa..9b52f77a9305 100644
--- a/drivers/serial/sh-sci.h
+++ b/drivers/serial/sh-sci.h
@@ -322,7 +322,7 @@
#define CPU_SCIx_FNS(name, sci_offset, sci_size, scif_offset, scif_size)\
static inline unsigned int sci_##name##_in(struct uart_port *port) \
{ \
- if (port->type == PORT_SCIF) { \
+ if (port->type == PORT_SCIF || port->type == PORT_SCIFB) { \
SCI_IN(scif_size, scif_offset) \
} else { /* PORT_SCI or PORT_SCIFA */ \
SCI_IN(sci_size, sci_offset); \
@@ -330,7 +330,7 @@
} \
static inline void sci_##name##_out(struct uart_port *port, unsigned int value) \
{ \
- if (port->type == PORT_SCIF) { \
+ if (port->type == PORT_SCIF || port->type == PORT_SCIFB) { \
SCI_OUT(scif_size, scif_offset, value) \
} else { /* PORT_SCI or PORT_SCIFA */ \
SCI_OUT(sci_size, sci_offset, value); \
@@ -384,8 +384,12 @@
defined(CONFIG_CPU_SUBTYPE_SH7720) || \
defined(CONFIG_CPU_SUBTYPE_SH7721) || \
defined(CONFIG_ARCH_SH7367) || \
- defined(CONFIG_ARCH_SH7377) || \
- defined(CONFIG_ARCH_SH7372)
+ defined(CONFIG_ARCH_SH7377)
+#define SCIF_FNS(name, scif_offset, scif_size) \
+ CPU_SCIF_FNS(name, scif_offset, scif_size)
+#elif defined(CONFIG_ARCH_SH7372)
+#define SCIx_FNS(name, sh4_scifa_offset, sh4_scifa_size, sh4_scifb_offset, sh4_scifb_size) \
+ CPU_SCIx_FNS(name, sh4_scifa_offset, sh4_scifa_size, sh4_scifb_offset, sh4_scifb_size)
#define SCIF_FNS(name, scif_offset, scif_size) \
CPU_SCIF_FNS(name, scif_offset, scif_size)
#else
@@ -422,8 +426,7 @@
defined(CONFIG_CPU_SUBTYPE_SH7720) || \
defined(CONFIG_CPU_SUBTYPE_SH7721) || \
defined(CONFIG_ARCH_SH7367) || \
- defined(CONFIG_ARCH_SH7377) || \
- defined(CONFIG_ARCH_SH7372)
+ defined(CONFIG_ARCH_SH7377)
SCIF_FNS(SCSMR, 0x00, 16)
SCIF_FNS(SCBRR, 0x04, 8)
@@ -436,6 +439,20 @@ SCIF_FNS(SCFDR, 0x1c, 16)
SCIF_FNS(SCxTDR, 0x20, 8)
SCIF_FNS(SCxRDR, 0x24, 8)
SCIF_FNS(SCLSR, 0x00, 0)
+#elif defined(CONFIG_ARCH_SH7372)
+SCIF_FNS(SCSMR, 0x00, 16)
+SCIF_FNS(SCBRR, 0x04, 8)
+SCIF_FNS(SCSCR, 0x08, 16)
+SCIF_FNS(SCTDSR, 0x0c, 16)
+SCIF_FNS(SCFER, 0x10, 16)
+SCIF_FNS(SCxSR, 0x14, 16)
+SCIF_FNS(SCFCR, 0x18, 16)
+SCIF_FNS(SCFDR, 0x1c, 16)
+SCIF_FNS(SCTFDR, 0x38, 16)
+SCIF_FNS(SCRFDR, 0x3c, 16)
+SCIx_FNS(SCxTDR, 0x20, 8, 0x40, 8)
+SCIx_FNS(SCxRDR, 0x24, 8, 0x60, 8)
+SCIF_FNS(SCLSR, 0x00, 0)
#elif defined(CONFIG_CPU_SUBTYPE_SH7723) ||\
defined(CONFIG_CPU_SUBTYPE_SH7724)
SCIx_FNS(SCSMR, 0x00, 16, 0x00, 16)
diff --git a/drivers/serial/sn_console.c b/drivers/serial/sn_console.c
index 9794e0cd3dcc..7e5e5efea4e2 100644
--- a/drivers/serial/sn_console.c
+++ b/drivers/serial/sn_console.c
@@ -470,7 +470,7 @@ sn_receive_chars(struct sn_cons_port *port, unsigned long flags)
}
if (port->sc_port.state) {
- /* The serial_core stuffs are initilized, use them */
+ /* The serial_core stuffs are initialized, use them */
tty = port->sc_port.state->port.tty;
}
else {
@@ -551,11 +551,11 @@ static void sn_transmit_chars(struct sn_cons_port *port, int raw)
BUG_ON(!port->sc_is_asynch);
if (port->sc_port.state) {
- /* We're initilized, using serial core infrastructure */
+ /* We're initialized, using serial core infrastructure */
xmit = &port->sc_port.state->xmit;
} else {
/* Probably sn_sal_switch_to_asynch has been run but serial core isn't
- * initilized yet. Just return. Writes are going through
+ * initialized yet. Just return. Writes are going through
* sn_sal_console_write (due to register_console) at this time.
*/
return;
diff --git a/drivers/serial/sunhv.c b/drivers/serial/sunhv.c
index 890f91742962..a779e22d213e 100644
--- a/drivers/serial/sunhv.c
+++ b/drivers/serial/sunhv.c
@@ -525,7 +525,7 @@ static int __devinit hv_probe(struct of_device *op, const struct of_device_id *m
unsigned long minor;
int err;
- if (op->irqs[0] == 0xffffffff)
+ if (op->archdata.irqs[0] == 0xffffffff)
return -ENODEV;
port = kzalloc(sizeof(struct uart_port), GFP_KERNEL);
@@ -557,7 +557,7 @@ static int __devinit hv_probe(struct of_device *op, const struct of_device_id *m
port->membase = (unsigned char __iomem *) __pa(port);
- port->irq = op->irqs[0];
+ port->irq = op->archdata.irqs[0];
port->dev = &op->dev;
@@ -644,12 +644,12 @@ static int __init sunhv_init(void)
if (tlb_type != hypervisor)
return -ENODEV;
- return of_register_driver(&hv_driver, &of_bus_type);
+ return of_register_platform_driver(&hv_driver);
}
static void __exit sunhv_exit(void)
{
- of_unregister_driver(&hv_driver);
+ of_unregister_platform_driver(&hv_driver);
}
module_init(sunhv_init);
diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c
index 5e81bc6b48b0..9845fb1cfb1f 100644
--- a/drivers/serial/sunsab.c
+++ b/drivers/serial/sunsab.c
@@ -969,7 +969,7 @@ static int __devinit sunsab_init_one(struct uart_sunsab_port *up,
return -ENOMEM;
up->regs = (union sab82532_async_regs __iomem *) up->port.membase;
- up->port.irq = op->irqs[0];
+ up->port.irq = op->archdata.irqs[0];
up->port.fifosize = SAB82532_XMIT_FIFO_SIZE;
up->port.iotype = UPIO_MEM;
@@ -1130,12 +1130,12 @@ static int __init sunsab_init(void)
}
}
- return of_register_driver(&sab_driver, &of_bus_type);
+ return of_register_platform_driver(&sab_driver);
}
static void __exit sunsab_exit(void)
{
- of_unregister_driver(&sab_driver);
+ of_unregister_platform_driver(&sab_driver);
if (sunsab_reg.nr) {
sunserial_unregister_minors(&sunsab_reg, sunsab_reg.nr);
}
diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c
index ffbf4553f665..3cdf74822db5 100644
--- a/drivers/serial/sunsu.c
+++ b/drivers/serial/sunsu.c
@@ -1443,7 +1443,7 @@ static int __devinit su_probe(struct of_device *op, const struct of_device_id *m
return -ENOMEM;
}
- up->port.irq = op->irqs[0];
+ up->port.irq = op->archdata.irqs[0];
up->port.dev = &op->dev;
@@ -1586,7 +1586,7 @@ static int __init sunsu_init(void)
return err;
}
- err = of_register_driver(&su_driver, &of_bus_type);
+ err = of_register_platform_driver(&su_driver);
if (err && num_uart)
sunserial_unregister_minors(&sunsu_reg, num_uart);
diff --git a/drivers/serial/sunzilog.c b/drivers/serial/sunzilog.c
index f9a24f4ebb34..d1e6bcb59546 100644
--- a/drivers/serial/sunzilog.c
+++ b/drivers/serial/sunzilog.c
@@ -1426,7 +1426,7 @@ static int __devinit zs_probe(struct of_device *op, const struct of_device_id *m
rp = sunzilog_chip_regs[inst];
if (zilog_irq == -1)
- zilog_irq = op->irqs[0];
+ zilog_irq = op->archdata.irqs[0];
up = &sunzilog_port_table[inst * 2];
@@ -1434,7 +1434,7 @@ static int __devinit zs_probe(struct of_device *op, const struct of_device_id *m
up[0].port.mapbase = op->resource[0].start + 0x00;
up[0].port.membase = (void __iomem *) &rp->channelA;
up[0].port.iotype = UPIO_MEM;
- up[0].port.irq = op->irqs[0];
+ up[0].port.irq = op->archdata.irqs[0];
up[0].port.uartclk = ZS_CLOCK;
up[0].port.fifosize = 1;
up[0].port.ops = &sunzilog_pops;
@@ -1451,7 +1451,7 @@ static int __devinit zs_probe(struct of_device *op, const struct of_device_id *m
up[1].port.mapbase = op->resource[0].start + 0x04;
up[1].port.membase = (void __iomem *) &rp->channelB;
up[1].port.iotype = UPIO_MEM;
- up[1].port.irq = op->irqs[0];
+ up[1].port.irq = op->archdata.irqs[0];
up[1].port.uartclk = ZS_CLOCK;
up[1].port.fifosize = 1;
up[1].port.ops = &sunzilog_pops;
@@ -1492,12 +1492,12 @@ static int __devinit zs_probe(struct of_device *op, const struct of_device_id *m
"is a %s\n",
dev_name(&op->dev),
(unsigned long long) up[0].port.mapbase,
- op->irqs[0], sunzilog_type(&up[0].port));
+ op->archdata.irqs[0], sunzilog_type(&up[0].port));
printk(KERN_INFO "%s: Mouse at MMIO 0x%llx (irq = %d) "
"is a %s\n",
dev_name(&op->dev),
(unsigned long long) up[1].port.mapbase,
- op->irqs[0], sunzilog_type(&up[1].port));
+ op->archdata.irqs[0], sunzilog_type(&up[1].port));
kbm_inst++;
}
@@ -1576,7 +1576,7 @@ static int __init sunzilog_init(void)
goto out_free_tables;
}
- err = of_register_driver(&zs_driver, &of_bus_type);
+ err = of_register_platform_driver(&zs_driver);
if (err)
goto out_unregister_uart;
@@ -1604,7 +1604,7 @@ out:
return err;
out_unregister_driver:
- of_unregister_driver(&zs_driver);
+ of_unregister_platform_driver(&zs_driver);
out_unregister_uart:
if (num_sunzilog) {
@@ -1619,7 +1619,7 @@ out_free_tables:
static void __exit sunzilog_exit(void)
{
- of_unregister_driver(&zs_driver);
+ of_unregister_platform_driver(&zs_driver);
if (zilog_irq != -1) {
struct uart_sunzilog_port *up = sunzilog_irq_chain;
diff --git a/drivers/serial/uartlite.c b/drivers/serial/uartlite.c
index 8acccd564378..caf085d3a76a 100644
--- a/drivers/serial/uartlite.c
+++ b/drivers/serial/uartlite.c
@@ -21,6 +21,7 @@
#include <asm/io.h>
#if defined(CONFIG_OF) && (defined(CONFIG_PPC32) || defined(CONFIG_MICROBLAZE))
#include <linux/of.h>
+#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/of_platform.h>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-17 22:28:02 +0000