summaryrefslogtreecommitdiff
path: root/drivers/scsi
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi')
-rw-r--r--drivers/scsi/isci/request.c138
-rw-r--r--drivers/scsi/isci/request.h1
-rw-r--r--drivers/scsi/isci/sas.h11
3 files changed, 65 insertions, 85 deletions
diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c
index 395084955150..1043fed2a40a 100644
--- a/drivers/scsi/isci/request.c
+++ b/drivers/scsi/isci/request.c
@@ -2943,6 +2943,20 @@ static void isci_request_io_request_complete(struct isci_host *isci_host,
dma_unmap_sg(&isci_host->pdev->dev, task->scatter,
request->num_sg_entries, task->data_dir);
break;
+ case SAS_PROTOCOL_SMP: {
+ struct scatterlist *sg = &task->smp_task.smp_req;
+ struct smp_req *smp_req;
+ void *kaddr;
+
+ dma_unmap_sg(&isci_host->pdev->dev, sg, 1, DMA_TO_DEVICE);
+
+ /* need to swab it back in case the command buffer is re-used */
+ kaddr = kmap_atomic(sg_page(sg), KM_IRQ0);
+ smp_req = kaddr + sg->offset;
+ sci_swab32_cpy(smp_req, smp_req, sg->length / sizeof(u32));
+ kunmap_atomic(kaddr, KM_IRQ0);
+ break;
+ }
default:
break;
}
@@ -3160,7 +3174,7 @@ scic_io_request_construct(struct scic_sds_controller *scic,
else if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP))
memset(&sci_req->stp.cmd, 0, sizeof(sci_req->stp.cmd));
else if (dev_is_expander(dev))
- memset(&sci_req->smp.cmd, 0, sizeof(sci_req->smp.cmd));
+ /* pass */;
else
return SCI_FAILURE_UNSUPPORTED_PROTOCOL;
@@ -3236,30 +3250,54 @@ static enum sci_status isci_request_stp_request_construct(
return status;
}
-/*
- * This function will fill in the SCU Task Context for a SMP request. The
- * following important settings are utilized: -# task_type ==
- * SCU_TASK_TYPE_SMP. This simply indicates that a normal request type
- * (i.e. non-raw frame) is being utilized to perform task management. -#
- * control_frame == 1. This ensures that the proper endianess is set so
- * that the bytes are transmitted in the right order for a smp request frame.
- * @sci_req: This parameter specifies the smp request object being
- * constructed.
- *
- */
-static void
-scu_smp_request_construct_task_context(struct scic_sds_request *sci_req,
- ssize_t req_len)
+static enum sci_status
+scic_io_request_construct_smp(struct device *dev,
+ struct scic_sds_request *sci_req,
+ struct sas_task *task)
{
- dma_addr_t dma_addr;
+ struct scatterlist *sg = &task->smp_task.smp_req;
struct scic_sds_remote_device *sci_dev;
- struct scic_sds_port *sci_port;
struct scu_task_context *task_context;
- ssize_t word_cnt = sizeof(struct smp_req) / sizeof(u32);
+ struct scic_sds_port *sci_port;
+ struct smp_req *smp_req;
+ void *kaddr;
+ u8 req_len;
+ u32 cmd;
+
+ kaddr = kmap_atomic(sg_page(sg), KM_IRQ0);
+ smp_req = kaddr + sg->offset;
+ /*
+ * Look at the SMP requests' header fields; for certain SAS 1.x SMP
+ * functions under SAS 2.0, a zero request length really indicates
+ * a non-zero default length.
+ */
+ if (smp_req->req_len == 0) {
+ switch (smp_req->func) {
+ case SMP_DISCOVER:
+ case SMP_REPORT_PHY_ERR_LOG:
+ case SMP_REPORT_PHY_SATA:
+ case SMP_REPORT_ROUTE_INFO:
+ smp_req->req_len = 2;
+ break;
+ case SMP_CONF_ROUTE_INFO:
+ case SMP_PHY_CONTROL:
+ case SMP_PHY_TEST_FUNCTION:
+ smp_req->req_len = 9;
+ break;
+ /* Default - zero is a valid default for 2.0. */
+ }
+ }
+ req_len = smp_req->req_len;
+ sci_swab32_cpy(smp_req, smp_req, sg->length / sizeof(u32));
+ cmd = *(u32 *) smp_req;
+ kunmap_atomic(kaddr, KM_IRQ0);
+
+ if (!dma_map_sg(dev, sg, 1, DMA_TO_DEVICE))
+ return SCI_FAILURE;
+
+ sci_req->protocol = SCIC_SMP_PROTOCOL;
/* byte swap the smp request. */
- sci_swab32_cpy(&sci_req->smp.cmd, &sci_req->smp.cmd,
- word_cnt);
task_context = scic_sds_request_get_task_context(sci_req);
@@ -3307,7 +3345,7 @@ scu_smp_request_construct_task_context(struct scic_sds_request *sci_req,
* 18h ~ 30h, protocol specific
* since commandIU has been build by framework at this point, we just
* copy the frist DWord from command IU to this location. */
- memcpy(&task_context->type.smp, &sci_req->smp.cmd, sizeof(u32));
+ memcpy(&task_context->type.smp, &cmd, sizeof(u32));
/*
* 40h
@@ -3347,48 +3385,12 @@ scu_smp_request_construct_task_context(struct scic_sds_request *sci_req,
* Copy the physical address for the command buffer to the SCU Task
* Context command buffer should not contain command header.
*/
- dma_addr = scic_io_request_get_dma_addr(sci_req,
- ((char *) &sci_req->smp.cmd) +
- sizeof(u32));
-
- task_context->command_iu_upper = upper_32_bits(dma_addr);
- task_context->command_iu_lower = lower_32_bits(dma_addr);
+ task_context->command_iu_upper = upper_32_bits(sg_dma_address(sg));
+ task_context->command_iu_lower = lower_32_bits(sg_dma_address(sg) + sizeof(u32));
/* SMP response comes as UF, so no need to set response IU address. */
task_context->response_iu_upper = 0;
task_context->response_iu_lower = 0;
-}
-
-static enum sci_status
-scic_io_request_construct_smp(struct scic_sds_request *sci_req)
-{
- struct smp_req *smp_req = &sci_req->smp.cmd;
-
- sci_req->protocol = SCIC_SMP_PROTOCOL;
-
- /*
- * Look at the SMP requests' header fields; for certain SAS 1.x SMP
- * functions under SAS 2.0, a zero request length really indicates
- * a non-zero default length.
- */
- if (smp_req->req_len == 0) {
- switch (smp_req->func) {
- case SMP_DISCOVER:
- case SMP_REPORT_PHY_ERR_LOG:
- case SMP_REPORT_PHY_SATA:
- case SMP_REPORT_ROUTE_INFO:
- smp_req->req_len = 2;
- break;
- case SMP_CONF_ROUTE_INFO:
- case SMP_PHY_CONTROL:
- case SMP_PHY_TEST_FUNCTION:
- smp_req->req_len = 9;
- break;
- /* Default - zero is a valid default for 2.0. */
- }
- }
-
- scu_smp_request_construct_task_context(sci_req, smp_req->req_len);
sci_change_state(&sci_req->sm, SCI_REQ_CONSTRUCTED);
@@ -3404,24 +3406,12 @@ scic_io_request_construct_smp(struct scic_sds_request *sci_req)
*/
static enum sci_status isci_smp_request_build(struct isci_request *ireq)
{
- enum sci_status status = SCI_FAILURE;
struct sas_task *task = isci_request_access_task(ireq);
+ struct device *dev = &ireq->isci_host->pdev->dev;
struct scic_sds_request *sci_req = &ireq->sci;
+ enum sci_status status = SCI_FAILURE;
- dev_dbg(&ireq->isci_host->pdev->dev,
- "%s: request = %p\n", __func__, ireq);
-
- dev_dbg(&ireq->isci_host->pdev->dev,
- "%s: smp_req len = %d\n",
- __func__,
- task->smp_task.smp_req.length);
-
- /* copy the smp_command to the address; */
- sg_copy_to_buffer(&task->smp_task.smp_req, 1,
- &sci_req->smp.cmd,
- sizeof(struct smp_req));
-
- status = scic_io_request_construct_smp(sci_req);
+ status = scic_io_request_construct_smp(dev, sci_req, task);
if (status != SCI_SUCCESS)
dev_warn(&ireq->isci_host->pdev->dev,
"%s: failed with status = %d\n",
diff --git a/drivers/scsi/isci/request.h b/drivers/scsi/isci/request.h
index 324fb7b3ab42..7c8b59a7c02c 100644
--- a/drivers/scsi/isci/request.h
+++ b/drivers/scsi/isci/request.h
@@ -244,7 +244,6 @@ struct scic_sds_request {
} ssp;
struct {
- struct smp_req cmd;
struct smp_resp rsp;
} smp;
diff --git a/drivers/scsi/isci/sas.h b/drivers/scsi/isci/sas.h
index 822a8dbd19ca..462b15174d3f 100644
--- a/drivers/scsi/isci/sas.h
+++ b/drivers/scsi/isci/sas.h
@@ -190,8 +190,6 @@ struct smp_req_phycntl {
u8 _r_h[3]; /* bytes 37-39 */
} __packed;
-#define SMP_REQ_VENDOR_SPECIFIC_MAX_LEN 1016
-
/*
* struct smp_req - This structure simply unionizes the existing request
* structures into a common request type.
@@ -203,14 +201,7 @@ struct smp_req {
u8 func; /* byte 1 */
u8 alloc_resp_len; /* byte 2 */
u8 req_len; /* byte 3 */
-
- union { /* bytes 4-N */
- u32 smp_req_gen;
- struct smp_req_phy_id phy_id;
- struct smp_req_phycntl phy_cntl;
- struct smp_req_conf_rtinfo conf_rt_info;
- u8 vendor[SMP_REQ_VENDOR_SPECIFIC_MAX_LEN];
- };
+ u8 req_data[0];
} __packed;
#define SMP_RESP_HDR_SZ 4