diff options
Diffstat (limited to 'drivers/scsi')
26 files changed, 254 insertions, 215 deletions
diff --git a/drivers/scsi/arm/acornscsi.c b/drivers/scsi/arm/acornscsi.c index 84fc7a0c6ff4..4a84599ff491 100644 --- a/drivers/scsi/arm/acornscsi.c +++ b/drivers/scsi/arm/acornscsi.c @@ -2642,6 +2642,7 @@ int acornscsi_abort(struct scsi_cmnd *SCpnt) //#endif clear_bit(SCpnt->device->id * 8 + (u8)(SCpnt->device->lun & 0x7), host->busyluns); + fallthrough; /* * We found the command, and cleared it out. Either diff --git a/drivers/scsi/arm/fas216.c b/drivers/scsi/arm/fas216.c index 30ed3d23635a..9c4458a99025 100644 --- a/drivers/scsi/arm/fas216.c +++ b/drivers/scsi/arm/fas216.c @@ -1375,6 +1375,7 @@ static void fas216_busservice_intr(FAS216_Info *info, unsigned int stat, unsigne case IS_COMPLETE: break; } + break; default: break; @@ -2010,7 +2011,7 @@ static void fas216_rq_sns_done(FAS216_Info *info, struct scsi_cmnd *SCpnt, "request sense complete, result=0x%04x%02x%02x", result, SCpnt->SCp.Message, SCpnt->SCp.Status); - if (result != DID_OK || SCpnt->SCp.Status != GOOD) + if (result != DID_OK || SCpnt->SCp.Status != SAM_STAT_GOOD) /* * Something went wrong. Make sure that we don't * have valid data in the sense buffer that could diff --git a/drivers/scsi/device_handler/scsi_dh_rdac.c b/drivers/scsi/device_handler/scsi_dh_rdac.c index 25f6e1ac9e7b..66652ab409cc 100644 --- a/drivers/scsi/device_handler/scsi_dh_rdac.c +++ b/drivers/scsi/device_handler/scsi_dh_rdac.c @@ -453,8 +453,8 @@ static int initialize_controller(struct scsi_device *sdev, if (!h->ctlr) err = SCSI_DH_RES_TEMP_UNAVAIL; else { - list_add_rcu(&h->node, &h->ctlr->dh_list); h->sdev = sdev; + list_add_rcu(&h->node, &h->ctlr->dh_list); } spin_unlock(&list_lock); err = SCSI_DH_OK; @@ -778,11 +778,11 @@ static void rdac_bus_detach( struct scsi_device *sdev ) spin_lock(&list_lock); if (h->ctlr) { list_del_rcu(&h->node); - h->sdev = NULL; kref_put(&h->ctlr->kref, release_controller); } spin_unlock(&list_lock); sdev->handler_data = NULL; + synchronize_rcu(); kfree(h); } diff --git a/drivers/scsi/hosts.c b/drivers/scsi/hosts.c index 929a3b043ad7..3f6f14f0cafb 100644 --- a/drivers/scsi/hosts.c +++ b/drivers/scsi/hosts.c @@ -488,6 +488,7 @@ struct Scsi_Host *scsi_host_alloc(struct scsi_host_template *sht, int privsize) shost_printk(KERN_WARNING, shost, "error handler thread failed to spawn, error = %ld\n", PTR_ERR(shost->ehandler)); + shost->ehandler = NULL; goto fail; } diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c index bee1bec49c09..935b01ee44b7 100644 --- a/drivers/scsi/ibmvscsi/ibmvfc.c +++ b/drivers/scsi/ibmvscsi/ibmvfc.c @@ -807,6 +807,13 @@ static int ibmvfc_init_event_pool(struct ibmvfc_host *vhost, for (i = 0; i < size; ++i) { struct ibmvfc_event *evt = &pool->events[i]; + /* + * evt->active states + * 1 = in flight + * 0 = being completed + * -1 = free/freed + */ + atomic_set(&evt->active, -1); atomic_set(&evt->free, 1); evt->crq.valid = 0x80; evt->crq.ioba = cpu_to_be64(pool->iu_token + (sizeof(*evt->xfer_iu) * i)); @@ -1017,6 +1024,7 @@ static void ibmvfc_free_event(struct ibmvfc_event *evt) BUG_ON(!ibmvfc_valid_event(pool, evt)); BUG_ON(atomic_inc_return(&evt->free) != 1); + BUG_ON(atomic_dec_and_test(&evt->active)); spin_lock_irqsave(&evt->queue->l_lock, flags); list_add_tail(&evt->queue_list, &evt->queue->free); @@ -1072,6 +1080,12 @@ static void ibmvfc_complete_purge(struct list_head *purge_list) **/ static void ibmvfc_fail_request(struct ibmvfc_event *evt, int error_code) { + /* + * Anything we are failing should still be active. Otherwise, it + * implies we already got a response for the command and are doing + * something bad like double completing it. + */ + BUG_ON(!atomic_dec_and_test(&evt->active)); if (evt->cmnd) { evt->cmnd->result = (error_code << 16); evt->done = ibmvfc_scsi_eh_done; @@ -1723,6 +1737,7 @@ static int ibmvfc_send_event(struct ibmvfc_event *evt, evt->done(evt); } else { + atomic_set(&evt->active, 1); spin_unlock_irqrestore(&evt->queue->l_lock, flags); ibmvfc_trc_start(evt); } @@ -3251,7 +3266,7 @@ static void ibmvfc_handle_crq(struct ibmvfc_crq *crq, struct ibmvfc_host *vhost, return; } - if (unlikely(atomic_read(&evt->free))) { + if (unlikely(atomic_dec_if_positive(&evt->active))) { dev_err(vhost->dev, "Received duplicate correlation_token 0x%08llx!\n", crq->ioba); return; @@ -3778,7 +3793,7 @@ static void ibmvfc_handle_scrq(struct ibmvfc_crq *crq, struct ibmvfc_host *vhost return; } - if (unlikely(atomic_read(&evt->free))) { + if (unlikely(atomic_dec_if_positive(&evt->active))) { dev_err(vhost->dev, "Received duplicate correlation_token 0x%08llx!\n", crq->ioba); return; diff --git a/drivers/scsi/ibmvscsi/ibmvfc.h b/drivers/scsi/ibmvscsi/ibmvfc.h index 4f0f3baefae4..92fb889d7eb0 100644 --- a/drivers/scsi/ibmvscsi/ibmvfc.h +++ b/drivers/scsi/ibmvscsi/ibmvfc.h @@ -745,6 +745,7 @@ struct ibmvfc_event { struct ibmvfc_target *tgt; struct scsi_cmnd *cmnd; atomic_t free; + atomic_t active; union ibmvfc_iu *xfer_iu; void (*done)(struct ibmvfc_event *evt); void (*_done)(struct ibmvfc_event *evt); diff --git a/drivers/scsi/libsas/sas_discover.c b/drivers/scsi/libsas/sas_discover.c index 9f5068f3bcfb..dd205414e505 100644 --- a/drivers/scsi/libsas/sas_discover.c +++ b/drivers/scsi/libsas/sas_discover.c @@ -461,7 +461,7 @@ static void sas_discover_domain(struct work_struct *work) break; #else pr_notice("ATA device seen but CONFIG_SCSI_SAS_ATA=N so cannot attach\n"); - /* Fall through */ + fallthrough; #endif /* Fall through - only for the #else condition above. */ default: diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index 5983e05b648f..e29523a1b530 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -13193,6 +13193,8 @@ lpfc_pci_probe_one_s4(struct pci_dev *pdev, const struct pci_device_id *pid) if (!phba) return -ENOMEM; + INIT_LIST_HEAD(&phba->poll_list); + /* Perform generic PCI device enabling operation */ error = lpfc_enable_pci_dev(phba); if (error) @@ -13327,7 +13329,6 @@ lpfc_pci_probe_one_s4(struct pci_dev *pdev, const struct pci_device_id *pid) /* Enable RAS FW log support */ lpfc_sli4_ras_setup(phba); - INIT_LIST_HEAD(&phba->poll_list); timer_setup(&phba->cpuhp_poll_timer, lpfc_sli4_poll_hbtimer, 0); cpuhp_state_add_instance_nocalls(lpfc_cpuhp_state, &phba->cpuhp); diff --git a/drivers/scsi/megaraid/megaraid_mm.c b/drivers/scsi/megaraid/megaraid_mm.c index abf7b401f5b9..c509440bd161 100644 --- a/drivers/scsi/megaraid/megaraid_mm.c +++ b/drivers/scsi/megaraid/megaraid_mm.c @@ -238,7 +238,7 @@ mraid_mm_get_adapter(mimd_t __user *umimd, int *rval) mimd_t mimd; uint32_t adapno; int iterator; - + bool is_found; if (copy_from_user(&mimd, umimd, sizeof(mimd_t))) { *rval = -EFAULT; @@ -254,12 +254,16 @@ mraid_mm_get_adapter(mimd_t __user *umimd, int *rval) adapter = NULL; iterator = 0; + is_found = false; list_for_each_entry(adapter, &adapters_list_g, list) { - if (iterator++ == adapno) break; + if (iterator++ == adapno) { + is_found = true; + break; + } } - if (!adapter) { + if (!is_found) { *rval = -ENODEV; return NULL; } @@ -725,6 +729,7 @@ ioctl_done(uioc_t *kioc) uint32_t adapno; int iterator; mraid_mmadp_t* adapter; + bool is_found; /* * When the kioc returns from driver, make sure it still doesn't @@ -747,19 +752,23 @@ ioctl_done(uioc_t *kioc) iterator = 0; adapter = NULL; adapno = kioc->adapno; + is_found = false; con_log(CL_ANN, ( KERN_WARNING "megaraid cmm: completed " "ioctl that was timedout before\n")); list_for_each_entry(adapter, &adapters_list_g, list) { - if (iterator++ == adapno) break; + if (iterator++ == adapno) { + is_found = true; + break; + } } kioc->timedout = 0; - if (adapter) { + if (is_found) mraid_mm_dealloc_kioc( adapter, kioc ); - } + } else { wake_up(&wait_q); diff --git a/drivers/scsi/mpi3mr/mpi3mr_fw.c b/drivers/scsi/mpi3mr/mpi3mr_fw.c index 9eceafca59bc..2dba2b0af166 100644 --- a/drivers/scsi/mpi3mr/mpi3mr_fw.c +++ b/drivers/scsi/mpi3mr/mpi3mr_fw.c @@ -2607,14 +2607,13 @@ static int mpi3mr_issue_iocinit(struct mpi3mr_ioc *mrioc) goto out; } drv_info->information_length = cpu_to_le32(data_len); - strncpy(drv_info->driver_signature, "Broadcom", sizeof(drv_info->driver_signature)); - strncpy(drv_info->os_name, utsname()->sysname, sizeof(drv_info->os_name)); - drv_info->os_name[sizeof(drv_info->os_name) - 1] = 0; - strncpy(drv_info->os_version, utsname()->release, sizeof(drv_info->os_version)); - drv_info->os_version[sizeof(drv_info->os_version) - 1] = 0; - strncpy(drv_info->driver_name, MPI3MR_DRIVER_NAME, sizeof(drv_info->driver_name)); - strncpy(drv_info->driver_version, MPI3MR_DRIVER_VERSION, sizeof(drv_info->driver_version)); - strncpy(drv_info->driver_release_date, MPI3MR_DRIVER_RELDATE, sizeof(drv_info->driver_release_date)); + strscpy(drv_info->driver_signature, "Broadcom", sizeof(drv_info->driver_signature)); + strscpy(drv_info->os_name, utsname()->sysname, sizeof(drv_info->os_name)); + strscpy(drv_info->os_version, utsname()->release, sizeof(drv_info->os_version)); + strscpy(drv_info->driver_name, MPI3MR_DRIVER_NAME, sizeof(drv_info->driver_name)); + strscpy(drv_info->driver_version, MPI3MR_DRIVER_VERSION, sizeof(drv_info->driver_version)); + strscpy(drv_info->driver_release_date, MPI3MR_DRIVER_RELDATE, + sizeof(drv_info->driver_release_date)); drv_info->driver_capabilities = 0; memcpy((u8 *)&mrioc->driver_info, (u8 *)drv_info, sizeof(mrioc->driver_info)); diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index c39955239d1c..cf4a3a2c22ad 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -2983,13 +2983,13 @@ _base_check_enable_msix(struct MPT3SAS_ADAPTER *ioc) } /** - * _base_free_irq - free irq + * mpt3sas_base_free_irq - free irq * @ioc: per adapter object * * Freeing respective reply_queue from the list. */ -static void -_base_free_irq(struct MPT3SAS_ADAPTER *ioc) +void +mpt3sas_base_free_irq(struct MPT3SAS_ADAPTER *ioc) { struct adapter_reply_queue *reply_q, *next; @@ -3191,12 +3191,12 @@ _base_check_and_enable_high_iops_queues(struct MPT3SAS_ADAPTER *ioc, } /** - * _base_disable_msix - disables msix + * mpt3sas_base_disable_msix - disables msix * @ioc: per adapter object * */ -static void -_base_disable_msix(struct MPT3SAS_ADAPTER *ioc) +void +mpt3sas_base_disable_msix(struct MPT3SAS_ADAPTER *ioc) { if (!ioc->msix_enable) return; @@ -3304,8 +3304,8 @@ _base_enable_msix(struct MPT3SAS_ADAPTER *ioc) for (i = 0; i < ioc->reply_queue_count; i++) { r = _base_request_irq(ioc, i); if (r) { - _base_free_irq(ioc); - _base_disable_msix(ioc); + mpt3sas_base_free_irq(ioc); + mpt3sas_base_disable_msix(ioc); goto try_ioapic; } } @@ -3342,8 +3342,8 @@ mpt3sas_base_unmap_resources(struct MPT3SAS_ADAPTER *ioc) dexitprintk(ioc, ioc_info(ioc, "%s\n", __func__)); - _base_free_irq(ioc); - _base_disable_msix(ioc); + mpt3sas_base_free_irq(ioc); + mpt3sas_base_disable_msix(ioc); kfree(ioc->replyPostRegisterIndex); ioc->replyPostRegisterIndex = NULL; @@ -7613,14 +7613,14 @@ _base_diag_reset(struct MPT3SAS_ADAPTER *ioc) } /** - * _base_make_ioc_ready - put controller in READY state + * mpt3sas_base_make_ioc_ready - put controller in READY state * @ioc: per adapter object * @type: FORCE_BIG_HAMMER or SOFT_RESET * * Return: 0 for success, non-zero for failure. */ -static int -_base_make_ioc_ready(struct MPT3SAS_ADAPTER *ioc, enum reset_type type) +int +mpt3sas_base_make_ioc_ready(struct MPT3SAS_ADAPTER *ioc, enum reset_type type) { u32 ioc_state; int rc; @@ -7851,7 +7851,7 @@ _base_make_ioc_operational(struct MPT3SAS_ADAPTER *ioc) return r; } - rc = _base_static_config_pages(ioc); + r = _base_static_config_pages(ioc); if (r) return r; @@ -7897,7 +7897,7 @@ mpt3sas_base_free_resources(struct MPT3SAS_ADAPTER *ioc) if (ioc->chip_phys && ioc->chip) { mpt3sas_base_mask_interrupts(ioc); ioc->shost_recovery = 1; - _base_make_ioc_ready(ioc, SOFT_RESET); + mpt3sas_base_make_ioc_ready(ioc, SOFT_RESET); ioc->shost_recovery = 0; } @@ -8017,7 +8017,7 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc) ioc->build_sg_mpi = &_base_build_sg; ioc->build_zero_len_sge_mpi = &_base_build_zero_len_sge; - r = _base_make_ioc_ready(ioc, SOFT_RESET); + r = mpt3sas_base_make_ioc_ready(ioc, SOFT_RESET); if (r) goto out_free_resources; @@ -8471,7 +8471,7 @@ mpt3sas_base_hard_reset_handler(struct MPT3SAS_ADAPTER *ioc, _base_pre_reset_handler(ioc); mpt3sas_wait_for_commands_to_complete(ioc); mpt3sas_base_mask_interrupts(ioc); - r = _base_make_ioc_ready(ioc, type); + r = mpt3sas_base_make_ioc_ready(ioc, type); if (r) goto out; _base_clear_outstanding_commands(ioc); diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h index d4834c8ee9c0..0c6c3df0038d 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.h +++ b/drivers/scsi/mpt3sas/mpt3sas_base.h @@ -1730,6 +1730,10 @@ do { ioc_err(ioc, "In func: %s\n", __func__); \ status, mpi_request, sz); } while (0) int mpt3sas_wait_for_ioc(struct MPT3SAS_ADAPTER *ioc, int wait_count); +int +mpt3sas_base_make_ioc_ready(struct MPT3SAS_ADAPTER *ioc, enum reset_type type); +void mpt3sas_base_free_irq(struct MPT3SAS_ADAPTER *ioc); +void mpt3sas_base_disable_msix(struct MPT3SAS_ADAPTER *ioc); /* scsih shared API */ struct scsi_cmnd *mpt3sas_scsih_scsi_lookup_get(struct MPT3SAS_ADAPTER *ioc, diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c index 866d118f7931..8e64a6f14542 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c @@ -11295,7 +11295,12 @@ scsih_shutdown(struct pci_dev *pdev) _scsih_ir_shutdown(ioc); _scsih_nvme_shutdown(ioc); - mpt3sas_base_detach(ioc); + mpt3sas_base_mask_interrupts(ioc); + ioc->shost_recovery = 1; + mpt3sas_base_make_ioc_ready(ioc, SOFT_RESET); + ioc->shost_recovery = 0; + mpt3sas_base_free_irq(ioc); + mpt3sas_base_disable_msix(ioc); } diff --git a/drivers/scsi/pm8001/pm8001_ctl.c b/drivers/scsi/pm8001/pm8001_ctl.c index 0b8802beb7ce..ec05c42e8ee6 100644 --- a/drivers/scsi/pm8001/pm8001_ctl.c +++ b/drivers/scsi/pm8001/pm8001_ctl.c @@ -77,7 +77,7 @@ DEVICE_ATTR(interface_rev, S_IRUGO, pm8001_ctl_mpi_interface_rev_show, NULL); * @attr: device attribute (unused) * @buf: the buffer returned * - * A sysfs 'read only' shost attribute. + * A sysfs 'read-only' shost attribute. */ static ssize_t controller_fatal_error_show(struct device *cdev, struct device_attribute *attr, char *buf) @@ -149,7 +149,7 @@ static ssize_t pm8001_ctl_ila_version_show(struct device *cdev, static DEVICE_ATTR(ila_version, 0444, pm8001_ctl_ila_version_show, NULL); /** - * pm8001_ctl_inactive_fw_version_show - Inacative firmware version number + * pm8001_ctl_inactive_fw_version_show - Inactive firmware version number * @cdev: pointer to embedded class device * @attr: device attribute (unused) * @buf: the buffer returned @@ -396,6 +396,7 @@ static DEVICE_ATTR(aap_log, S_IRUGO, pm8001_ctl_aap_log_show, NULL); * @cdev:pointer to embedded class device * @attr: device attribute (unused) * @buf: the buffer returned + * * A sysfs 'read-only' shost attribute. */ static ssize_t pm8001_ctl_ib_queue_log_show(struct device *cdev, @@ -430,6 +431,7 @@ static DEVICE_ATTR(ib_log, S_IRUGO, pm8001_ctl_ib_queue_log_show, NULL); * @cdev:pointer to embedded class device * @attr: device attribute (unused) * @buf: the buffer returned + * * A sysfs 'read-only' shost attribute. */ @@ -464,6 +466,7 @@ static DEVICE_ATTR(ob_log, S_IRUGO, pm8001_ctl_ob_queue_log_show, NULL); * @cdev:pointer to embedded class device * @attr: device attribute (unused) * @buf:the buffer returned + * * A sysfs 'read-only' shost attribute. */ static ssize_t pm8001_ctl_bios_version_show(struct device *cdev, @@ -555,13 +558,13 @@ static ssize_t pm8001_ctl_iop_log_show(struct device *cdev, static DEVICE_ATTR(iop_log, S_IRUGO, pm8001_ctl_iop_log_show, NULL); /** - ** pm8001_ctl_fatal_log_show - fatal error logging - ** @cdev:pointer to embedded class device - ** @attr: device attribute - ** @buf: the buffer returned - ** - ** A sysfs 'read-only' shost attribute. - **/ + * pm8001_ctl_fatal_log_show - fatal error logging + * @cdev:pointer to embedded class device + * @attr: device attribute + * @buf: the buffer returned + * + * A sysfs 'read-only' shost attribute. + */ static ssize_t pm8001_ctl_fatal_log_show(struct device *cdev, struct device_attribute *attr, char *buf) @@ -575,13 +578,13 @@ static ssize_t pm8001_ctl_fatal_log_show(struct device *cdev, static DEVICE_ATTR(fatal_log, S_IRUGO, pm8001_ctl_fatal_log_show, NULL); /** - ** non_fatal_log_show - non fatal error logging - ** @cdev:pointer to embedded class device - ** @attr: device attribute - ** @buf: the buffer returned - ** - ** A sysfs 'read-only' shost attribute. - **/ + * non_fatal_log_show - non fatal error logging + * @cdev:pointer to embedded class device + * @attr: device attribute + * @buf: the buffer returned + * + * A sysfs 'read-only' shost attribute. + */ static ssize_t non_fatal_log_show(struct device *cdev, struct device_attribute *attr, char *buf) { @@ -620,12 +623,13 @@ static ssize_t non_fatal_count_store(struct device *cdev, static DEVICE_ATTR_RW(non_fatal_count); /** - ** pm8001_ctl_gsm_log_show - gsm dump collection - ** @cdev:pointer to embedded class device - ** @attr: device attribute (unused) - ** @buf: the buffer returned - ** A sysfs 'read-only' shost attribute. - **/ + * pm8001_ctl_gsm_log_show - gsm dump collection + * @cdev:pointer to embedded class device + * @attr: device attribute (unused) + * @buf: the buffer returned + * + * A sysfs 'read-only' shost attribute. + */ static ssize_t pm8001_ctl_gsm_log_show(struct device *cdev, struct device_attribute *attr, char *buf) { diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c index 33f8217577b1..17c0f26e683a 100644 --- a/drivers/scsi/pm8001/pm8001_hwi.c +++ b/drivers/scsi/pm8001/pm8001_hwi.c @@ -384,7 +384,7 @@ static void update_outbnd_queue_table(struct pm8001_hba_info *pm8001_ha, /** * pm8001_bar4_shift - function is called to shift BAR base address - * @pm8001_ha : our hba card infomation + * @pm8001_ha : our hba card information * @shiftValue : shifting value in memory bar. */ int pm8001_bar4_shift(struct pm8001_hba_info *pm8001_ha, u32 shiftValue) @@ -1151,7 +1151,7 @@ static void pm8001_hw_chip_rst(struct pm8001_hba_info *pm8001_ha) } /** - * pm8001_chip_iounmap - which maped when initialized. + * pm8001_chip_iounmap - which mapped when initialized. * @pm8001_ha: our hba card information */ void pm8001_chip_iounmap(struct pm8001_hba_info *pm8001_ha) @@ -1187,10 +1187,10 @@ pm8001_chip_intx_interrupt_enable(struct pm8001_hba_info *pm8001_ha) pm8001_cw32(pm8001_ha, 0, MSGU_ODCR, ODCR_CLEAR_ALL); } - /** - * pm8001_chip_intx_interrupt_disable- disable PM8001 chip interrupt - * @pm8001_ha: our hba card information - */ +/** + * pm8001_chip_intx_interrupt_disable - disable PM8001 chip interrupt + * @pm8001_ha: our hba card information + */ static void pm8001_chip_intx_interrupt_disable(struct pm8001_hba_info *pm8001_ha) { @@ -1876,8 +1876,8 @@ static void pm8001_send_read_log(struct pm8001_hba_info *pm8001_ha, * @piomb: the message contents of this outbound message. * * When FW has completed a ssp request for example a IO request, after it has - * filled the SG data with the data, it will trigger this event represent - * that he has finished the job,please check the coresponding buffer. + * filled the SG data with the data, it will trigger this event representing + * that he has finished the job; please check the corresponding buffer. * So we will tell the caller who maybe waiting the result to tell upper layer * that the task has been finished. */ @@ -3522,7 +3522,7 @@ hw_event_phy_down(struct pm8001_hba_info *pm8001_ha, void *piomb) * * when sas layer find a device it will notify LLDD, then the driver register * the domain device to FW, this event is the return device ID which the FW - * has assigned, from now,inter-communication with FW is no longer using the + * has assigned, from now, inter-communication with FW is no longer using the * SAS address, use device ID which FW assigned. */ int pm8001_mpi_reg_resp(struct pm8001_hba_info *pm8001_ha, void *piomb) diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c index 313248c7bab9..47db7e0beae6 100644 --- a/drivers/scsi/pm8001/pm8001_init.c +++ b/drivers/scsi/pm8001/pm8001_init.c @@ -233,7 +233,7 @@ static irqreturn_t pm8001_interrupt_handler_msix(int irq, void *opaque) /** * pm8001_interrupt_handler_intx - main INTx interrupt handler. * @irq: interrupt number - * @dev_id: sas_ha structure. The HBA is retrieved from sas_has structure. + * @dev_id: sas_ha structure. The HBA is retrieved from sas_ha structure. */ static irqreturn_t pm8001_interrupt_handler_intx(int irq, void *dev_id) @@ -439,9 +439,9 @@ err_out: } /** - * pm8001_ioremap - remap the pci high physical address to kernal virtual + * pm8001_ioremap - remap the pci high physical address to kernel virtual * address so that we can access them. - * @pm8001_ha:our hba structure. + * @pm8001_ha: our hba structure. */ static int pm8001_ioremap(struct pm8001_hba_info *pm8001_ha) { @@ -652,7 +652,7 @@ static void pm8001_post_sas_ha_init(struct Scsi_Host *shost, * pm8001_init_sas_add - initialize sas address * @pm8001_ha: our ha struct. * - * Currently we just set the fixed SAS address to our HBA,for manufacture, + * Currently we just set the fixed SAS address to our HBA, for manufacture, * it should read from the EEPROM */ static void pm8001_init_sas_add(struct pm8001_hba_info *pm8001_ha) @@ -790,7 +790,7 @@ struct pm8001_mpi3_phy_pg_trx_config { }; /** - * pm8001_get_internal_phy_settings : Retrieves the internal PHY settings + * pm8001_get_internal_phy_settings - Retrieves the internal PHY settings * @pm8001_ha : our adapter * @phycfg : PHY config page to populate */ @@ -810,7 +810,7 @@ void pm8001_get_internal_phy_settings(struct pm8001_hba_info *pm8001_ha, } /** - * pm8001_get_external_phy_settings : Retrieves the external PHY settings + * pm8001_get_external_phy_settings - Retrieves the external PHY settings * @pm8001_ha : our adapter * @phycfg : PHY config page to populate */ @@ -830,7 +830,7 @@ void pm8001_get_external_phy_settings(struct pm8001_hba_info *pm8001_ha, } /** - * pm8001_get_phy_mask : Retrieves the mask that denotes if a PHY is int/ext + * pm8001_get_phy_mask - Retrieves the mask that denotes if a PHY is int/ext * @pm8001_ha : our adapter * @phymask : The PHY mask */ @@ -868,7 +868,7 @@ void pm8001_get_phy_mask(struct pm8001_hba_info *pm8001_ha, int *phymask) } /** - * pm8001_set_phy_settings_ven_117c_12G() : Configure ATTO 12Gb PHY settings + * pm8001_set_phy_settings_ven_117c_12G() - Configure ATTO 12Gb PHY settings * @pm8001_ha : our adapter */ static @@ -903,7 +903,7 @@ int pm8001_set_phy_settings_ven_117c_12G(struct pm8001_hba_info *pm8001_ha) } /** - * pm8001_configure_phy_settings : Configures PHY settings based on vendor ID. + * pm8001_configure_phy_settings - Configures PHY settings based on vendor ID. * @pm8001_ha : our hba. */ static int pm8001_configure_phy_settings(struct pm8001_hba_info *pm8001_ha) @@ -1053,8 +1053,8 @@ intx: * @ent: pci device id * * This function is the main initialization function, when register a new - * pci driver it is invoked, all struct an hardware initilization should be done - * here, also, register interrupt + * pci driver it is invoked, all struct and hardware initialization should be + * done here, also, register interrupt. */ static int pm8001_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) @@ -1172,10 +1172,11 @@ err_out_enable: return rc; } -/* +/** * pm8001_init_ccb_tag - allocate memory to CCB and tag. * @pm8001_ha: our hba card information. * @shost: scsi host which has been allocated outside. + * @pdev: pci device. */ static int pm8001_init_ccb_tag(struct pm8001_hba_info *pm8001_ha, struct Scsi_Host *shost, @@ -1270,7 +1271,7 @@ static void pm8001_pci_remove(struct pci_dev *pdev) * pm8001_pci_suspend - power management suspend main entry point * @dev: Device struct * - * Returns 0 success, anything else error. + * Return: 0 on success, anything else on error. */ static int __maybe_unused pm8001_pci_suspend(struct device *dev) { @@ -1315,7 +1316,7 @@ static int __maybe_unused pm8001_pci_suspend(struct device *dev) * pm8001_pci_resume - power management resume main entry point * @dev: Device struct * - * Returns 0 success, anything else error. + * Return: 0 on success, anything else on error. */ static int __maybe_unused pm8001_pci_resume(struct device *dev) { diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c index 6f33d821e545..32e60f0c3b14 100644 --- a/drivers/scsi/pm8001/pm8001_sas.c +++ b/drivers/scsi/pm8001/pm8001_sas.c @@ -98,14 +98,16 @@ void pm8001_tag_init(struct pm8001_hba_info *pm8001_ha) pm8001_tag_free(pm8001_ha, i); } - /** - * pm8001_mem_alloc - allocate memory for pm8001. - * @pdev: pci device. - * @virt_addr: the allocated virtual address - * @pphys_addr_hi: the physical address high byte address. - * @pphys_addr_lo: the physical address low byte address. - * @mem_size: memory size. - */ +/** + * pm8001_mem_alloc - allocate memory for pm8001. + * @pdev: pci device. + * @virt_addr: the allocated virtual address + * @pphys_addr: DMA address for this device + * @pphys_addr_hi: the physical address high byte address. + * @pphys_addr_lo: the physical address low byte address. + * @mem_size: memory size. + * @align: requested byte alignment + */ int pm8001_mem_alloc(struct pci_dev *pdev, void **virt_addr, dma_addr_t *pphys_addr, u32 *pphys_addr_hi, u32 *pphys_addr_lo, u32 mem_size, u32 align) @@ -339,7 +341,7 @@ static int pm8001_task_prep_ssp_tm(struct pm8001_hba_info *pm8001_ha, } /** - * pm8001_task_prep_ssp - the dispatcher function,prepare ssp data for ssp task + * pm8001_task_prep_ssp - the dispatcher function, prepare ssp data for ssp task * @pm8001_ha: our hba card information * @ccb: the ccb which attached to ssp task */ @@ -554,10 +556,10 @@ void pm8001_ccb_task_free(struct pm8001_hba_info *pm8001_ha, pm8001_tag_free(pm8001_ha, ccb_idx); } - /** - * pm8001_alloc_dev - find a empty pm8001_device - * @pm8001_ha: our hba card information - */ +/** + * pm8001_alloc_dev - find a empty pm8001_device + * @pm8001_ha: our hba card information + */ static struct pm8001_device *pm8001_alloc_dev(struct pm8001_hba_info *pm8001_ha) { u32 dev; @@ -682,8 +684,7 @@ int pm8001_dev_found(struct domain_device *dev) void pm8001_task_done(struct sas_task *task) { - if (!del_timer(&task->slow_task->timer)) - return; + del_timer(&task->slow_task->timer); complete(&task->slow_task->completion); } @@ -691,9 +692,14 @@ static void pm8001_tmf_timedout(struct timer_list *t) { struct sas_task_slow *slow = from_timer(slow, t, timer); struct sas_task *task = slow->task; + unsigned long flags; - task->task_state_flags |= SAS_TASK_STATE_ABORTED; - complete(&task->slow_task->completion); + spin_lock_irqsave(&task->task_state_lock, flags); + if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) { + task->task_state_flags |= SAS_TASK_STATE_ABORTED; + complete(&task->slow_task->completion); + } + spin_unlock_irqrestore(&task->task_state_lock, flags); } #define PM8001_TASK_TIMEOUT 20 @@ -705,7 +711,7 @@ static void pm8001_tmf_timedout(struct timer_list *t) * @parameter: ssp task parameter. * * when errors or exception happened, we may want to do something, for example - * abort the issued task which result in this execption, it is done by calling + * abort the issued task which result in this exception, it is done by calling * this function, note it is also with the task execute interface. */ static int pm8001_exec_internal_tmf_task(struct domain_device *dev, @@ -746,13 +752,10 @@ static int pm8001_exec_internal_tmf_task(struct domain_device *dev, } res = -TMF_RESP_FUNC_FAILED; /* Even TMF timed out, return direct. */ - if ((task->task_state_flags & SAS_TASK_STATE_ABORTED)) { - if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) { - pm8001_dbg(pm8001_ha, FAIL, - "TMF task[%x]timeout.\n", - tmf->tmf); - goto ex_err; - } + if (task->task_state_flags & SAS_TASK_STATE_ABORTED) { + pm8001_dbg(pm8001_ha, FAIL, "TMF task[%x]timeout.\n", + tmf->tmf); + goto ex_err; } if (task->task_status.resp == SAS_TASK_COMPLETE && @@ -832,12 +835,9 @@ pm8001_exec_internal_task_abort(struct pm8001_hba_info *pm8001_ha, wait_for_completion(&task->slow_task->completion); res = TMF_RESP_FUNC_FAILED; /* Even TMF timed out, return direct. */ - if ((task->task_state_flags & SAS_TASK_STATE_ABORTED)) { - if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) { - pm8001_dbg(pm8001_ha, FAIL, - "TMF task timeout.\n"); - goto ex_err; - } + if (task->task_state_flags & SAS_TASK_STATE_ABORTED) { + pm8001_dbg(pm8001_ha, FAIL, "TMF task timeout.\n"); + goto ex_err; } if (task->task_status.resp == SAS_TASK_COMPLETE && @@ -984,11 +984,12 @@ void pm8001_open_reject_retry( } /** - * pm8001_I_T_nexus_reset() - * Standard mandates link reset for ATA (type 0) and hard reset for - * SSP (type 1) , only for RECOVERY - * @dev: the device structure for the device to reset. - */ + * pm8001_I_T_nexus_reset() - reset the initiator/target connection + * @dev: the device structure for the device to reset. + * + * Standard mandates link reset for ATA (type 0) and hard reset for + * SSP (type 1), only for RECOVERY + */ int pm8001_I_T_nexus_reset(struct domain_device *dev) { int rc = TMF_RESP_FUNC_FAILED; diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c index 45ecd9639977..6ffe17b849ae 100644 --- a/drivers/scsi/pm8001/pm80xx_hwi.c +++ b/drivers/scsi/pm8001/pm80xx_hwi.c @@ -140,7 +140,7 @@ ssize_t pm80xx_get_fatal_dump(struct device *cdev, pm8001_ha->fatal_bar_loc = 0; } - /* Read until accum_len is retrived */ + /* Read until accum_len is retrieved */ accum_len = pm8001_mr32(fatal_table_address, MPI_FATAL_EDUMP_TABLE_ACCUM_LEN); /* Determine length of data between previously stored transfer length @@ -1011,7 +1011,7 @@ static int mpi_init_check(struct pm8001_hba_info *pm8001_ha) value); return -EBUSY; } - /* check the MPI-State for initialization upto 100ms*/ + /* check the MPI-State for initialization up to 100ms*/ max_wait_count = 5;/* 100 msec */ do { msleep(FW_READY_INTERVAL); @@ -1093,7 +1093,7 @@ static int init_pci_device_addresses(struct pm8001_hba_info *pm8001_ha) value = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_0); - /** + /* * lower 26 bits of SCRATCHPAD0 register describes offset within the * PCIe BAR where the MPI configuration table is present */ @@ -1101,7 +1101,7 @@ static int init_pci_device_addresses(struct pm8001_hba_info *pm8001_ha) pm8001_dbg(pm8001_ha, DEV, "Scratchpad 0 Offset: 0x%x value 0x%x\n", offset, value); - /** + /* * Upper 6 bits describe the offset within PCI config space where BAR * is located. */ @@ -1109,7 +1109,7 @@ static int init_pci_device_addresses(struct pm8001_hba_info *pm8001_ha) pcibar = get_pci_bar_index(pcilogic); pm8001_dbg(pm8001_ha, INIT, "Scratchpad 0 PCI BAR: %d\n", pcibar); - /** + /* * Make sure the offset falls inside the ioremapped PCI BAR */ if (offset > pm8001_ha->io_mem[pcibar].memsize) { @@ -1121,7 +1121,7 @@ static int init_pci_device_addresses(struct pm8001_hba_info *pm8001_ha) pm8001_ha->main_cfg_tbl_addr = base_addr = pm8001_ha->io_mem[pcibar].memvirtaddr + offset; - /** + /* * Validate main configuration table address: first DWord should read * "PMCS" */ @@ -1385,7 +1385,7 @@ pm80xx_get_encrypt_info(struct pm8001_hba_info *pm8001_ha) } /** - * pm80xx_encrypt_update - update flash with encryption informtion + * pm80xx_encrypt_update - update flash with encryption information * @pm8001_ha: our hba card information. */ static int pm80xx_encrypt_update(struct pm8001_hba_info *pm8001_ha) @@ -1422,7 +1422,7 @@ static int pm80xx_encrypt_update(struct pm8001_hba_info *pm8001_ha) } /** - * pm80xx_chip_init - the main init function that initialize whole PM8001 chip. + * pm80xx_chip_init - the main init function that initializes whole PM8001 chip. * @pm8001_ha: our hba card information */ static int pm80xx_chip_init(struct pm8001_hba_info *pm8001_ha) @@ -1541,7 +1541,7 @@ static int mpi_uninit_check(struct pm8001_hba_info *pm8001_ha) } /** - * pm80xx_fatal_errors - returns non zero *ONLY* when fatal errors + * pm80xx_fatal_errors - returns non-zero *ONLY* when fatal errors * @pm8001_ha: our hba card information * * Fatal errors are recoverable only after a host reboot. @@ -1576,8 +1576,8 @@ pm80xx_fatal_errors(struct pm8001_hba_info *pm8001_ha) } /** - * pm80xx_chip_soft_rst - soft reset the PM8001 chip, so that the clear all - * the FW register status to the originated status. + * pm80xx_chip_soft_rst - soft reset the PM8001 chip, so that all + * FW register status are reset to the originated status. * @pm8001_ha: our hba card information */ @@ -1895,13 +1895,13 @@ static void pm80xx_send_read_log(struct pm8001_hba_info *pm8001_ha, } /** - * mpi_ssp_completion- process the event that FW response to the SSP request. + * mpi_ssp_completion - process the event that FW response to the SSP request. * @pm8001_ha: our hba card information * @piomb: the message contents of this outbound message. * * When FW has completed a ssp request for example a IO request, after it has - * filled the SG data with the data, it will trigger this event represent - * that he has finished the job,please check the coresponding buffer. + * filled the SG data with the data, it will trigger this event representing + * that he has finished the job; please check the corresponding buffer. * So we will tell the caller who maybe waiting the result to tell upper layer * that the task has been finished. */ @@ -3217,7 +3217,7 @@ mpi_smp_completion(struct pm8001_hba_info *pm8001_ha, void *piomb) } /** - * pm80xx_hw_event_ack_req- For PM8001,some events need to acknowage to FW. + * pm80xx_hw_event_ack_req- For PM8001, some events need to acknowledge to FW. * @pm8001_ha: our hba card information * @Qnum: the outbound queue message number. * @SEA: source of event to ack @@ -3275,7 +3275,7 @@ static void hw_event_port_recover(struct pm8001_hba_info *pm8001_ha, } /** - * hw_event_sas_phy_up -FW tells me a SAS phy up event. + * hw_event_sas_phy_up - FW tells me a SAS phy up event. * @pm8001_ha: our hba card information * @piomb: IO message buffer */ @@ -3353,7 +3353,7 @@ hw_event_sas_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb) } /** - * hw_event_sata_phy_up -FW tells me a SATA phy up event. + * hw_event_sata_phy_up - FW tells me a SATA phy up event. * @pm8001_ha: our hba card information * @piomb: IO message buffer */ @@ -3400,7 +3400,7 @@ hw_event_sata_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb) } /** - * hw_event_phy_down -we should notify the libsas the phy is down. + * hw_event_phy_down - we should notify the libsas the phy is down. * @pm8001_ha: our hba card information * @piomb: IO message buffer */ @@ -3500,7 +3500,7 @@ static int mpi_phy_start_resp(struct pm8001_hba_info *pm8001_ha, void *piomb) } /** - * mpi_thermal_hw_event -The hw event has come. + * mpi_thermal_hw_event - a thermal hw event has come. * @pm8001_ha: our hba card information * @piomb: IO message buffer */ @@ -3530,7 +3530,7 @@ static int mpi_thermal_hw_event(struct pm8001_hba_info *pm8001_ha, void *piomb) } /** - * mpi_hw_event -The hw event has come. + * mpi_hw_event - The hw event has come. * @pm8001_ha: our hba card information * @piomb: IO message buffer */ @@ -4025,7 +4025,7 @@ static void process_one_iomb(struct pm8001_hba_info *pm8001_ha, void *piomb) case OPC_OUB_SET_DEV_INFO: pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SET_DEV_INFO\n"); break; - /* spcv specifc commands */ + /* spcv specific commands */ case OPC_OUB_PHY_START_RESP: pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_PHY_START_RESP opcode:%x\n", opc); @@ -4186,7 +4186,7 @@ static void build_smp_cmd(u32 deviceID, __le32 hTag, } /** - * pm80xx_chip_smp_req - send a SMP task to FW + * pm80xx_chip_smp_req - send an SMP task to FW * @pm8001_ha: our hba card information. * @ccb: the ccb information this request used. */ @@ -4346,7 +4346,7 @@ static int check_enc_sat_cmd(struct sas_task *task) } /** - * pm80xx_chip_ssp_io_req - send a SSP task to FW + * pm80xx_chip_ssp_io_req - send an SSP task to FW * @pm8001_ha: our hba card information. * @ccb: the ccb information this request used. */ @@ -4750,13 +4750,13 @@ pm80xx_chip_phy_start_req(struct pm8001_hba_info *pm8001_ha, u8 phy_id) payload.ase_sh_lm_slr_phyid = cpu_to_le32(SPINHOLD_DISABLE | LINKMODE_AUTO | pm8001_ha->link_rate | phy_id); /* SSC Disable and SAS Analog ST configuration */ - /** + /* payload.ase_sh_lm_slr_phyid = cpu_to_le32(SSC_DISABLE_30 | SAS_ASE | SPINHOLD_DISABLE | LINKMODE_AUTO | LINKRATE_15 | LINKRATE_30 | LINKRATE_60 | phy_id); Have to add "SAS PHY Analog Setup SPASTI 1 Byte" Based on need - **/ + */ payload.sas_identify.dev_type = SAS_END_DEVICE; payload.sas_identify.initiator_bits = SAS_PROTOCOL_ALL; diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index 8f9727e525aa..7456a26aef51 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -194,7 +194,7 @@ void scsi_queue_insert(struct scsi_cmnd *cmd, int reason) * @bufflen: len of buffer * @sense: optional sense buffer * @sshdr: optional decoded sense header - * @timeout: request timeout in seconds + * @timeout: request timeout in HZ * @retries: number of times to retry request * @flags: flags for ->cmd_flags * @rq_flags: flags for ->rq_flags diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c index b059bf2b61d4..5b6996a2401b 100644 --- a/drivers/scsi/scsi_scan.c +++ b/drivers/scsi/scsi_scan.c @@ -475,7 +475,8 @@ static struct scsi_target *scsi_alloc_target(struct device *parent, error = shost->hostt->target_alloc(starget); if(error) { - dev_printk(KERN_ERR, dev, "target allocation failed, error %d\n", error); + if (error != -ENXIO) + dev_err(dev, "target allocation failed, error %d\n", error); /* don't want scsi_target_reap to do the final * put because it will be under the host lock */ scsi_target_destroy(starget); diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c index 32489d25158f..c0d31119d6d7 100644 --- a/drivers/scsi/scsi_sysfs.c +++ b/drivers/scsi/scsi_sysfs.c @@ -807,11 +807,17 @@ store_state_field(struct device *dev, struct device_attribute *attr, mutex_lock(&sdev->state_mutex); ret = scsi_device_set_state(sdev, state); /* - * If the device state changes to SDEV_RUNNING, we need to run - * the queue to avoid I/O hang. + * If the device state changes to SDEV_RUNNING, we need to + * run the queue to avoid I/O hang, and rescan the device + * to revalidate it. Running the queue first is necessary + * because another thread may be waiting inside + * blk_mq_freeze_queue_wait() and because that call may be + * waiting for pending I/O to finish. */ - if (ret == 0 && state == SDEV_RUNNING) + if (ret == 0 && state == SDEV_RUNNING) { blk_mq_run_hw_queues(sdev->request_queue, true); + scsi_rescan_device(dev); + } mutex_unlock(&sdev->state_mutex); return ret == 0 ? count : -EINVAL; diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c index b07105ae7c91..d8b05d8b5470 100644 --- a/drivers/scsi/scsi_transport_iscsi.c +++ b/drivers/scsi/scsi_transport_iscsi.c @@ -439,39 +439,10 @@ static umode_t iscsi_iface_attr_is_visible(struct kobject *kobj, struct device *dev = container_of(kobj, struct device, kobj); struct iscsi_iface *iface = iscsi_dev_to_iface(dev); struct iscsi_transport *t = iface->transport; - int param; - int param_type; + int param = -1; if (attr == &dev_attr_iface_enabled.attr) param = ISCSI_NET_PARAM_IFACE_ENABLE; - else if (attr == &dev_attr_iface_vlan_id.attr) - param = ISCSI_NET_PARAM_VLAN_ID; - else if (attr == &dev_attr_iface_vlan_priority.attr) - param = ISCSI_NET_PARAM_VLAN_PRIORITY; - else if (attr == &dev_attr_iface_vlan_enabled.attr) - param = ISCSI_NET_PARAM_VLAN_ENABLED; - else if (attr == &dev_attr_iface_mtu.attr) - param = ISCSI_NET_PARAM_MTU; - else if (attr == &dev_attr_iface_port.attr) - param = ISCSI_NET_PARAM_PORT; - else if (attr == &dev_attr_iface_ipaddress_state.attr) - param = ISCSI_NET_PARAM_IPADDR_STATE; - else if (attr == &dev_attr_iface_delayed_ack_en.attr) - param = ISCSI_NET_PARAM_DELAYED_ACK_EN; - else if (attr == &dev_attr_iface_tcp_nagle_disable.attr) - param = ISCSI_NET_PARAM_TCP_NAGLE_DISABLE; - else if (attr == &dev_attr_iface_tcp_wsf_disable.attr) - param = ISCSI_NET_PARAM_TCP_WSF_DISABLE; - else if (attr == &dev_attr_iface_tcp_wsf.attr) - param = ISCSI_NET_PARAM_TCP_WSF; - else if (attr == &dev_attr_iface_tcp_timer_scale.attr) - param = ISCSI_NET_PARAM_TCP_TIMER_SCALE; - else if (attr == &dev_attr_iface_tcp_timestamp_en.attr) - param = ISCSI_NET_PARAM_TCP_TIMESTAMP_EN; - else if (attr == &dev_attr_iface_cache_id.attr) - param = ISCSI_NET_PARAM_CACHE_ID; - else if (attr == &dev_attr_iface_redirect_en.attr) - param = ISCSI_NET_PARAM_REDIRECT_EN; else if (attr == &dev_attr_iface_def_taskmgmt_tmo.attr) param = ISCSI_IFACE_PARAM_DEF_TASKMGMT_TMO; else if (attr == &dev_attr_iface_header_digest.attr) @@ -508,6 +479,38 @@ static umode_t iscsi_iface_attr_is_visible(struct kobject *kobj, param = ISCSI_IFACE_PARAM_STRICT_LOGIN_COMP_EN; else if (attr == &dev_attr_iface_initiator_name.attr) param = ISCSI_IFACE_PARAM_INITIATOR_NAME; + + if (param != -1) + return t->attr_is_visible(ISCSI_IFACE_PARAM, param); + + if (attr == &dev_attr_iface_vlan_id.attr) + param = ISCSI_NET_PARAM_VLAN_ID; + else if (attr == &dev_attr_iface_vlan_priority.attr) + param = ISCSI_NET_PARAM_VLAN_PRIORITY; + else if (attr == &dev_attr_iface_vlan_enabled.attr) + param = ISCSI_NET_PARAM_VLAN_ENABLED; + else if (attr == &dev_attr_iface_mtu.attr) + param = ISCSI_NET_PARAM_MTU; + else if (attr == &dev_attr_iface_port.attr) + param = ISCSI_NET_PARAM_PORT; + else if (attr == &dev_attr_iface_ipaddress_state.attr) + param = ISCSI_NET_PARAM_IPADDR_STATE; + else if (attr == &dev_attr_iface_delayed_ack_en.attr) + param = ISCSI_NET_PARAM_DELAYED_ACK_EN; + else if (attr == &dev_attr_iface_tcp_nagle_disable.attr) + param = ISCSI_NET_PARAM_TCP_NAGLE_DISABLE; + else if (attr == &dev_attr_iface_tcp_wsf_disable.attr) + param = ISCSI_NET_PARAM_TCP_WSF_DISABLE; + else if (attr == &dev_attr_iface_tcp_wsf.attr) + param = ISCSI_NET_PARAM_TCP_WSF; + else if (attr == &dev_attr_iface_tcp_timer_scale.attr) + param = ISCSI_NET_PARAM_TCP_TIMER_SCALE; + else if (attr == &dev_attr_iface_tcp_timestamp_en.attr) + param = ISCSI_NET_PARAM_TCP_TIMESTAMP_EN; + else if (attr == &dev_attr_iface_cache_id.attr) + param = ISCSI_NET_PARAM_CACHE_ID; + else if (attr == &dev_attr_iface_redirect_en.attr) + param = ISCSI_NET_PARAM_REDIRECT_EN; else if (iface->iface_type == ISCSI_IFACE_TYPE_IPV4) { if (attr == &dev_attr_ipv4_iface_ipaddress.attr) param = ISCSI_NET_PARAM_IPV4_ADDR; @@ -598,32 +601,7 @@ static umode_t iscsi_iface_attr_is_visible(struct kobject *kobj, return 0; } - switch (param) { - case ISCSI_IFACE_PARAM_DEF_TASKMGMT_TMO: - case ISCSI_IFACE_PARAM_HDRDGST_EN: - case ISCSI_IFACE_PARAM_DATADGST_EN: - case ISCSI_IFACE_PARAM_IMM_DATA_EN: - case ISCSI_IFACE_PARAM_INITIAL_R2T_EN: - case ISCSI_IFACE_PARAM_DATASEQ_INORDER_EN: - case ISCSI_IFACE_PARAM_PDU_INORDER_EN: - case ISCSI_IFACE_PARAM_ERL: - case ISCSI_IFACE_PARAM_MAX_RECV_DLENGTH: - case ISCSI_IFACE_PARAM_FIRST_BURST: - case ISCSI_IFACE_PARAM_MAX_R2T: - case ISCSI_IFACE_PARAM_MAX_BURST: - case ISCSI_IFACE_PARAM_CHAP_AUTH_EN: - case ISCSI_IFACE_PARAM_BIDI_CHAP_EN: - case ISCSI_IFACE_PARAM_DISCOVERY_AUTH_OPTIONAL: - case ISCSI_IFACE_PARAM_DISCOVERY_LOGOUT_EN: - case ISCSI_IFACE_PARAM_STRICT_LOGIN_COMP_EN: - case ISCSI_IFACE_PARAM_INITIATOR_NAME: - param_type = ISCSI_IFACE_PARAM; - break; - default: - param_type = ISCSI_NET_PARAM; - } - - return t->attr_is_visible(param_type, param); + return t->attr_is_visible(ISCSI_NET_PARAM, param); } static struct attribute *iscsi_iface_attrs[] = { diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 6d2d63629a90..b8d55af763f9 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -98,11 +98,7 @@ MODULE_ALIAS_SCSI_DEVICE(TYPE_MOD); MODULE_ALIAS_SCSI_DEVICE(TYPE_RBC); MODULE_ALIAS_SCSI_DEVICE(TYPE_ZBC); -#if !defined(CONFIG_DEBUG_BLOCK_EXT_DEVT) #define SD_MINORS 16 -#else -#define SD_MINORS 0 -#endif static void sd_config_discard(struct scsi_disk *, unsigned int); static void sd_config_write_same(struct scsi_disk *); diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c index 94c254e9012e..a6d3ac0a6cbc 100644 --- a/drivers/scsi/sr.c +++ b/drivers/scsi/sr.c @@ -221,7 +221,7 @@ static unsigned int sr_get_events(struct scsi_device *sdev) else if (med->media_event_code == 2) return DISK_EVENT_MEDIA_CHANGE; else if (med->media_event_code == 3) - return DISK_EVENT_EJECT_REQUEST; + return DISK_EVENT_MEDIA_CHANGE; return 0; } diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c index 328bb961c281..37506b3fe5a9 100644 --- a/drivers/scsi/storvsc_drv.c +++ b/drivers/scsi/storvsc_drv.c @@ -1199,14 +1199,24 @@ static void storvsc_on_io_completion(struct storvsc_device *stor_device, vstor_packet->vm_srb.sense_info_length); if (vstor_packet->vm_srb.scsi_status != 0 || - vstor_packet->vm_srb.srb_status != SRB_STATUS_SUCCESS) - storvsc_log(device, STORVSC_LOGGING_ERROR, + vstor_packet->vm_srb.srb_status != SRB_STATUS_SUCCESS) { + + /* + * Log TEST_UNIT_READY errors only as warnings. Hyper-V can + * return errors when detecting devices using TEST_UNIT_READY, + * and logging these as errors produces unhelpful noise. + */ + int loglevel = (stor_pkt->vm_srb.cdb[0] == TEST_UNIT_READY) ? + STORVSC_LOGGING_WARN : STORVSC_LOGGING_ERROR; + + storvsc_log(device, loglevel, "tag#%d cmd 0x%x status: scsi 0x%x srb 0x%x hv 0x%x\n", request->cmd->request->tag, stor_pkt->vm_srb.cdb[0], vstor_packet->vm_srb.scsi_status, vstor_packet->vm_srb.srb_status, vstor_packet->status); + } if (vstor_packet->vm_srb.scsi_status == SAM_STAT_CHECK_CONDITION && (vstor_packet->vm_srb.srb_status & SRB_STATUS_AUTOSENSE_VALID)) diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h index c98d540ac044..194755c9ddfe 100644 --- a/drivers/scsi/ufs/ufshcd.h +++ b/drivers/scsi/ufs/ufshcd.h @@ -1229,8 +1229,13 @@ static inline int ufshcd_vops_pwr_change_notify(struct ufs_hba *hba, static inline void ufshcd_vops_setup_xfer_req(struct ufs_hba *hba, int tag, bool is_scsi_cmd) { - if (hba->vops && hba->vops->setup_xfer_req) - return hba->vops->setup_xfer_req(hba, tag, is_scsi_cmd); + if (hba->vops && hba->vops->setup_xfer_req) { + unsigned long flags; + + spin_lock_irqsave(hba->host->host_lock, flags); + hba->vops->setup_xfer_req(hba, tag, is_scsi_cmd); + spin_unlock_irqrestore(hba->host->host_lock, flags); + } } static inline void ufshcd_vops_setup_task_mgmt(struct ufs_hba *hba, |