diff options
Diffstat (limited to 'drivers/reset')
| -rw-r--r-- | drivers/reset/Kconfig | 13 | ||||
| -rw-r--r-- | drivers/reset/Makefile | 1 | ||||
| -rw-r--r-- | drivers/reset/reset-imx7.c | 12 | ||||
| -rw-r--r-- | drivers/reset/reset-meson.c | 51 | ||||
| -rw-r--r-- | drivers/reset/reset-scmi.c | 124 | ||||
| -rw-r--r-- | drivers/reset/reset-simple.c | 3 |
6 files changed, 147 insertions, 57 deletions
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig index 21efb7d39d62..7b07281aa0ae 100644 --- a/drivers/reset/Kconfig +++ b/drivers/reset/Kconfig @@ -116,9 +116,20 @@ config RESET_QCOM_PDC to control reset signals provided by PDC for Modem, Compute, Display, GPU, Debug, AOP, Sensors, Audio, SP and APPS. +config RESET_SCMI + tristate "Reset driver controlled via ARM SCMI interface" + depends on ARM_SCMI_PROTOCOL || COMPILE_TEST + default ARM_SCMI_PROTOCOL + help + This driver provides support for reset signal/domains that are + controlled by firmware that implements the SCMI interface. + + This driver uses SCMI Message Protocol to interact with the + firmware controlling all the reset signals. + config RESET_SIMPLE bool "Simple Reset Controller Driver" if COMPILE_TEST - default ARCH_STM32 || ARCH_STRATIX10 || ARCH_SUNXI || ARCH_ZX || ARCH_ASPEED || ARCH_BITMAIN + default ARCH_STM32 || ARCH_STRATIX10 || ARCH_SUNXI || ARCH_ZX || ARCH_ASPEED || ARCH_BITMAIN || ARC help This enables a simple reset controller driver for reset lines that that can be asserted and deasserted by toggling bits in a contiguous, diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile index 61456b8f659c..cf60ce526064 100644 --- a/drivers/reset/Makefile +++ b/drivers/reset/Makefile @@ -18,6 +18,7 @@ obj-$(CONFIG_RESET_OXNAS) += reset-oxnas.o obj-$(CONFIG_RESET_PISTACHIO) += reset-pistachio.o obj-$(CONFIG_RESET_QCOM_AOSS) += reset-qcom-aoss.o obj-$(CONFIG_RESET_QCOM_PDC) += reset-qcom-pdc.o +obj-$(CONFIG_RESET_SCMI) += reset-scmi.o obj-$(CONFIG_RESET_SIMPLE) += reset-simple.o obj-$(CONFIG_RESET_STM32MP157) += reset-stm32mp1.o obj-$(CONFIG_RESET_SOCFPGA) += reset-socfpga.o diff --git a/drivers/reset/reset-imx7.c b/drivers/reset/reset-imx7.c index 3ecd770f910b..1443a55a0c29 100644 --- a/drivers/reset/reset-imx7.c +++ b/drivers/reset/reset-imx7.c @@ -169,9 +169,9 @@ static const struct imx7_src_signal imx8mq_src_signals[IMX8MQ_RESET_NUM] = { [IMX8MQ_RESET_OTG2_PHY_RESET] = { SRC_USBOPHY2_RCR, BIT(0) }, [IMX8MQ_RESET_MIPI_DSI_RESET_BYTE_N] = { SRC_MIPIPHY_RCR, BIT(1) }, [IMX8MQ_RESET_MIPI_DSI_RESET_N] = { SRC_MIPIPHY_RCR, BIT(2) }, - [IMX8MQ_RESET_MIPI_DIS_DPI_RESET_N] = { SRC_MIPIPHY_RCR, BIT(3) }, - [IMX8MQ_RESET_MIPI_DIS_ESC_RESET_N] = { SRC_MIPIPHY_RCR, BIT(4) }, - [IMX8MQ_RESET_MIPI_DIS_PCLK_RESET_N] = { SRC_MIPIPHY_RCR, BIT(5) }, + [IMX8MQ_RESET_MIPI_DSI_DPI_RESET_N] = { SRC_MIPIPHY_RCR, BIT(3) }, + [IMX8MQ_RESET_MIPI_DSI_ESC_RESET_N] = { SRC_MIPIPHY_RCR, BIT(4) }, + [IMX8MQ_RESET_MIPI_DSI_PCLK_RESET_N] = { SRC_MIPIPHY_RCR, BIT(5) }, [IMX8MQ_RESET_PCIEPHY] = { SRC_PCIEPHY_RCR, BIT(2) | BIT(1) }, [IMX8MQ_RESET_PCIEPHY_PERST] = { SRC_PCIEPHY_RCR, BIT(3) }, @@ -220,9 +220,9 @@ static int imx8mq_reset_set(struct reset_controller_dev *rcdev, case IMX8MQ_RESET_PCIE_CTRL_APPS_EN: case IMX8MQ_RESET_PCIE2_CTRL_APPS_EN: /* fallthrough */ - case IMX8MQ_RESET_MIPI_DIS_PCLK_RESET_N: /* fallthrough */ - case IMX8MQ_RESET_MIPI_DIS_ESC_RESET_N: /* fallthrough */ - case IMX8MQ_RESET_MIPI_DIS_DPI_RESET_N: /* fallthrough */ + case IMX8MQ_RESET_MIPI_DSI_PCLK_RESET_N: /* fallthrough */ + case IMX8MQ_RESET_MIPI_DSI_ESC_RESET_N: /* fallthrough */ + case IMX8MQ_RESET_MIPI_DSI_DPI_RESET_N: /* fallthrough */ case IMX8MQ_RESET_MIPI_DSI_RESET_N: /* fallthrough */ case IMX8MQ_RESET_MIPI_DSI_RESET_BYTE_N: /* fallthrough */ value = assert ? 0 : bit; diff --git a/drivers/reset/reset-meson.c b/drivers/reset/reset-meson.c index 5242e0679df7..7d05d766e1ea 100644 --- a/drivers/reset/reset-meson.c +++ b/drivers/reset/reset-meson.c @@ -1,58 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause /* * Amlogic Meson Reset Controller driver * - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright (c) 2016 BayLibre, SAS. - * Author: Neil Armstrong <narmstrong@baylibre.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see <http://www.gnu.org/licenses/>. - * The full GNU General Public License is included in this distribution - * in the file called COPYING. - * - * BSD LICENSE - * * Copyright (c) 2016 BayLibre, SAS. * Author: Neil Armstrong <narmstrong@baylibre.com> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include <linux/err.h> #include <linux/init.h> diff --git a/drivers/reset/reset-scmi.c b/drivers/reset/reset-scmi.c new file mode 100644 index 000000000000..c6d3c8427f14 --- /dev/null +++ b/drivers/reset/reset-scmi.c @@ -0,0 +1,124 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * ARM System Control and Management Interface (ARM SCMI) reset driver + * + * Copyright (C) 2019 ARM Ltd. + */ + +#include <linux/module.h> +#include <linux/of.h> +#include <linux/device.h> +#include <linux/reset-controller.h> +#include <linux/scmi_protocol.h> + +/** + * struct scmi_reset_data - reset controller information structure + * @rcdev: reset controller entity + * @handle: ARM SCMI handle used for communication with system controller + */ +struct scmi_reset_data { + struct reset_controller_dev rcdev; + const struct scmi_handle *handle; +}; + +#define to_scmi_reset_data(p) container_of((p), struct scmi_reset_data, rcdev) +#define to_scmi_handle(p) (to_scmi_reset_data(p)->handle) + +/** + * scmi_reset_assert() - assert device reset + * @rcdev: reset controller entity + * @id: ID of the reset to be asserted + * + * This function implements the reset driver op to assert a device's reset + * using the ARM SCMI protocol. + * + * Return: 0 for successful request, else a corresponding error value + */ +static int +scmi_reset_assert(struct reset_controller_dev *rcdev, unsigned long id) +{ + const struct scmi_handle *handle = to_scmi_handle(rcdev); + + return handle->reset_ops->assert(handle, id); +} + +/** + * scmi_reset_deassert() - deassert device reset + * @rcdev: reset controller entity + * @id: ID of the reset to be deasserted + * + * This function implements the reset driver op to deassert a device's reset + * using the ARM SCMI protocol. + * + * Return: 0 for successful request, else a corresponding error value + */ +static int +scmi_reset_deassert(struct reset_controller_dev *rcdev, unsigned long id) +{ + const struct scmi_handle *handle = to_scmi_handle(rcdev); + + return handle->reset_ops->deassert(handle, id); +} + +/** + * scmi_reset_reset() - reset the device + * @rcdev: reset controller entity + * @id: ID of the reset signal to be reset(assert + deassert) + * + * This function implements the reset driver op to trigger a device's + * reset signal using the ARM SCMI protocol. + * + * Return: 0 for successful request, else a corresponding error value + */ +static int +scmi_reset_reset(struct reset_controller_dev *rcdev, unsigned long id) +{ + const struct scmi_handle *handle = to_scmi_handle(rcdev); + + return handle->reset_ops->reset(handle, id); +} + +static const struct reset_control_ops scmi_reset_ops = { + .assert = scmi_reset_assert, + .deassert = scmi_reset_deassert, + .reset = scmi_reset_reset, +}; + +static int scmi_reset_probe(struct scmi_device *sdev) +{ + struct scmi_reset_data *data; + struct device *dev = &sdev->dev; + struct device_node *np = dev->of_node; + const struct scmi_handle *handle = sdev->handle; + + if (!handle || !handle->reset_ops) + return -ENODEV; + + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->rcdev.ops = &scmi_reset_ops; + data->rcdev.owner = THIS_MODULE; + data->rcdev.of_node = np; + data->rcdev.nr_resets = handle->reset_ops->num_domains_get(handle); + + return devm_reset_controller_register(dev, &data->rcdev); +} + +static const struct scmi_device_id scmi_id_table[] = { + { SCMI_PROTOCOL_RESET }, + { }, +}; +MODULE_DEVICE_TABLE(scmi, scmi_id_table); + +static struct scmi_driver scmi_reset_driver = { + .name = "scmi-reset", + .probe = scmi_reset_probe, + .id_table = scmi_id_table, +}; +module_scmi_driver(scmi_reset_driver); + +MODULE_AUTHOR("Sudeep Holla <sudeep.holla@arm.com>"); +MODULE_DESCRIPTION("ARM SCMI reset controller driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/reset/reset-simple.c b/drivers/reset/reset-simple.c index 1154f7b1f4dd..067e7e7b34f1 100644 --- a/drivers/reset/reset-simple.c +++ b/drivers/reset/reset-simple.c @@ -127,6 +127,9 @@ static const struct of_device_id reset_simple_dt_ids[] = { { .compatible = "aspeed,ast2500-lpc-reset" }, { .compatible = "bitmain,bm1880-reset", .data = &reset_simple_active_low }, + { .compatible = "snps,dw-high-reset" }, + { .compatible = "snps,dw-low-reset", + .data = &reset_simple_active_low }, { /* sentinel */ }, }; |