5 files changed, 30 insertions, 331 deletions

diff --git a/drivers/power/supply/ab8500_bmdata.c b/drivers/power/supply/ab8500_bmdata.c
index 4a7ed50d1dc5..7b2b69916f48 100644
--- a/drivers/power/supply/ab8500_bmdata.c
+++ b/drivers/power/supply/ab8500_bmdata.c
@@ -430,13 +430,6 @@ static const struct abx500_maxim_parameters ab8500_maxi_params = {
 	.charger_curr_step = 100,
 };
 
-static const struct abx500_maxim_parameters abx540_maxi_params = {
-	.ena_maxi = true,
-	.chg_curr = 3000,
-	.wait_cycles = 10,
-	.charger_curr_step = 200,
-};
-
 static const struct abx500_bm_charger_parameters chg = {
 	.usb_volt_max		= 5500,
 	.usb_curr_max		= 1500,
@@ -453,17 +446,6 @@ static int ab8500_charge_output_curr_map[] = {
         900,    1000,   1100,   1200,   1300,   1400,   1500,   1500,
 };
 
-static int ab8540_charge_output_curr_map[] = {
-        0,      0,      0,      75,     100,    125,    150,    175,
-        200,    225,    250,    275,    300,    325,    350,    375,
-        400,    425,    450,    475,    500,    525,    550,    575,
-        600,    625,    650,    675,    700,    725,    750,    775,
-        800,    825,    850,    875,    900,    925,    950,    975,
-        1000,   1025,   1050,   1075,   1100,   1125,   1150,   1175,
-        1200,   1225,   1250,   1275,   1300,   1325,   1350,   1375,
-        1400,   1425,   1450,   1500,   1600,   1700,   1900,   2000,
-};
-
 /*
  * This array maps the raw hex value to charger input current used by the
  * AB8500 values
@@ -473,17 +455,6 @@ static int ab8500_charge_input_curr_map[] = {
         700,    800,    900,    1000,   1100,   1300,   1400,   1500,
 };
 
-static int ab8540_charge_input_curr_map[] = {
-        25,     50,     75,     100,    125,    150,    175,    200,
-        225,    250,    275,    300,    325,    350,    375,    400,
-        425,    450,    475,    500,    525,    550,    575,    600,
-        625,    650,    675,    700,    725,    750,    775,    800,
-        825,    850,    875,    900,    925,    950,    975,    1000,
-        1025,   1050,   1075,   1100,   1125,   1150,   1175,   1200,
-        1225,   1250,   1275,   1300,   1325,   1350,   1375,   1400,
-        1425,   1450,   1475,   1500,   1500,   1500,   1500,   1500,
-};
-
 struct abx500_bm_data ab8500_bm_data = {
 	.temp_under             = 3,
 	.temp_low               = 8,
@@ -518,40 +489,6 @@ struct abx500_bm_data ab8500_bm_data = {
         .n_chg_in_curr          = ARRAY_SIZE(ab8500_charge_input_curr_map),
 };
 
-struct abx500_bm_data ab8540_bm_data = {
-        .temp_under             = 3,
-        .temp_low               = 8,
-        .temp_high              = 43,
-        .temp_over              = 48,
-        .main_safety_tmr_h      = 4,
-        .temp_interval_chg      = 20,
-        .temp_interval_nochg    = 120,
-        .usb_safety_tmr_h       = 4,
-        .bkup_bat_v             = BUP_VCH_SEL_2P6V,
-        .bkup_bat_i             = BUP_ICH_SEL_150UA,
-        .no_maintenance         = false,
-        .capacity_scaling       = false,
-        .adc_therm              = ABx500_ADC_THERM_BATCTRL,
-        .chg_unknown_bat        = false,
-        .enable_overshoot       = false,
-        .fg_res                 = 100,
-        .cap_levels             = &cap_levels,
-        .bat_type               = bat_type_thermistor,
-        .n_btypes               = ARRAY_SIZE(bat_type_thermistor),
-        .batt_id                = 0,
-        .interval_charging      = 5,
-        .interval_not_charging  = 120,
-        .temp_hysteresis        = 3,
-        .gnd_lift_resistance    = 0,
-        .maxi                   = &abx540_maxi_params,
-        .chg_params             = &chg,
-        .fg_params              = &fg,
-        .chg_output_curr        = ab8540_charge_output_curr_map,
-        .n_chg_out_curr         = ARRAY_SIZE(ab8540_charge_output_curr_map),
-        .chg_input_curr         = ab8540_charge_input_curr_map,
-        .n_chg_in_curr          = ARRAY_SIZE(ab8540_charge_input_curr_map),
-};
-
 int ab8500_bm_of_probe(struct device *dev,
 		       struct device_node *np,
 		       struct abx500_bm_data *bm)
diff --git a/drivers/power/supply/ab8500_btemp.c b/drivers/power/supply/ab8500_btemp.c
index f7a35ebfbab2..708fd58cd62b 100644
--- a/drivers/power/supply/ab8500_btemp.c
+++ b/drivers/power/supply/ab8500_btemp.c
@@ -214,22 +214,10 @@ static int ab8500_btemp_curr_source_enable(struct ab8500_btemp *di,
 	/* Only do this for batteries with internal NTC */
 	if (di->bm->adc_therm == ABx500_ADC_THERM_BATCTRL && enable) {
 
-		if (is_ab8540(di->parent)) {
-			if (di->curr_source == BTEMP_BATCTRL_CURR_SRC_60UA)
-				curr = BAT_CTRL_60U_ENA;
-			else
-				curr = BAT_CTRL_120U_ENA;
-		} else if (is_ab9540(di->parent) || is_ab8505(di->parent)) {
-			if (di->curr_source == BTEMP_BATCTRL_CURR_SRC_16UA)
-				curr = BAT_CTRL_16U_ENA;
-			else
-				curr = BAT_CTRL_18U_ENA;
-		} else {
-			if (di->curr_source == BTEMP_BATCTRL_CURR_SRC_7UA)
-				curr = BAT_CTRL_7U_ENA;
-			else
-				curr = BAT_CTRL_20U_ENA;
-		}
+		if (di->curr_source == BTEMP_BATCTRL_CURR_SRC_7UA)
+			curr = BAT_CTRL_7U_ENA;
+		else
+			curr = BAT_CTRL_20U_ENA;
 
 		dev_dbg(di->dev, "Set BATCTRL %duA\n", di->curr_source);
 
@@ -260,28 +248,12 @@ static int ab8500_btemp_curr_source_enable(struct ab8500_btemp *di,
 	} else if (di->bm->adc_therm == ABx500_ADC_THERM_BATCTRL && !enable) {
 		dev_dbg(di->dev, "Disable BATCTRL curr source\n");
 
-		if (is_ab8540(di->parent)) {
-			/* Write 0 to the curr bits */
-			ret = abx500_mask_and_set_register_interruptible(
-				di->dev,
-				AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE,
-				BAT_CTRL_60U_ENA | BAT_CTRL_120U_ENA,
-				~(BAT_CTRL_60U_ENA | BAT_CTRL_120U_ENA));
-		} else if (is_ab9540(di->parent) || is_ab8505(di->parent)) {
-			/* Write 0 to the curr bits */
-			ret = abx500_mask_and_set_register_interruptible(
-				di->dev,
-				AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE,
-				BAT_CTRL_16U_ENA | BAT_CTRL_18U_ENA,
-				~(BAT_CTRL_16U_ENA | BAT_CTRL_18U_ENA));
-		} else {
-			/* Write 0 to the curr bits */
-			ret = abx500_mask_and_set_register_interruptible(
-				di->dev,
-				AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE,
-				BAT_CTRL_7U_ENA | BAT_CTRL_20U_ENA,
-				~(BAT_CTRL_7U_ENA | BAT_CTRL_20U_ENA));
-		}
+		/* Write 0 to the curr bits */
+		ret = abx500_mask_and_set_register_interruptible(
+			di->dev,
+			AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE,
+			BAT_CTRL_7U_ENA | BAT_CTRL_20U_ENA,
+			~(BAT_CTRL_7U_ENA | BAT_CTRL_20U_ENA));
 
 		if (ret) {
 			dev_err(di->dev, "%s failed disabling current source\n",
@@ -324,25 +296,11 @@ static int ab8500_btemp_curr_source_enable(struct ab8500_btemp *di,
 	 * if we got an error above
 	 */
 disable_curr_source:
-	if (is_ab8540(di->parent)) {
-		/* Write 0 to the curr bits */
-		ret = abx500_mask_and_set_register_interruptible(di->dev,
-			AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE,
-			BAT_CTRL_60U_ENA | BAT_CTRL_120U_ENA,
-			~(BAT_CTRL_60U_ENA | BAT_CTRL_120U_ENA));
-	} else if (is_ab9540(di->parent) || is_ab8505(di->parent)) {
-		/* Write 0 to the curr bits */
-		ret = abx500_mask_and_set_register_interruptible(di->dev,
-			AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE,
-			BAT_CTRL_16U_ENA | BAT_CTRL_18U_ENA,
-			~(BAT_CTRL_16U_ENA | BAT_CTRL_18U_ENA));
-	} else {
-		/* Write 0 to the curr bits */
-		ret = abx500_mask_and_set_register_interruptible(di->dev,
-			AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE,
-			BAT_CTRL_7U_ENA | BAT_CTRL_20U_ENA,
-			~(BAT_CTRL_7U_ENA | BAT_CTRL_20U_ENA));
-	}
+	/* Write 0 to the curr bits */
+	ret = abx500_mask_and_set_register_interruptible(di->dev,
+		AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE,
+		BAT_CTRL_7U_ENA | BAT_CTRL_20U_ENA,
+		~(BAT_CTRL_7U_ENA | BAT_CTRL_20U_ENA));
 
 	if (ret) {
 		dev_err(di->dev, "%s failed disabling current source\n",
@@ -556,13 +514,8 @@ static int ab8500_btemp_id(struct ab8500_btemp *di)
 {
 	int res;
 	u8 i;
-	if (is_ab8540(di->parent))
-		di->curr_source = BTEMP_BATCTRL_CURR_SRC_60UA;
-	else if (is_ab9540(di->parent) || is_ab8505(di->parent))
-		di->curr_source = BTEMP_BATCTRL_CURR_SRC_16UA;
-	else
-		di->curr_source = BTEMP_BATCTRL_CURR_SRC_7UA;
 
+	di->curr_source = BTEMP_BATCTRL_CURR_SRC_7UA;
 	di->bm->batt_id = BATTERY_UNKNOWN;
 
 	res =  ab8500_btemp_get_batctrl_res(di);
@@ -600,18 +553,8 @@ static int ab8500_btemp_id(struct ab8500_btemp *di)
 	 */
 	if (di->bm->adc_therm == ABx500_ADC_THERM_BATCTRL &&
 	    di->bm->batt_id == 1) {
-		if (is_ab8540(di->parent)) {
-			dev_dbg(di->dev,
-				"Set BATCTRL current source to 60uA\n");
-			di->curr_source = BTEMP_BATCTRL_CURR_SRC_60UA;
-		} else if (is_ab9540(di->parent) || is_ab8505(di->parent)) {
-			dev_dbg(di->dev,
-				"Set BATCTRL current source to 16uA\n");
-			di->curr_source = BTEMP_BATCTRL_CURR_SRC_16UA;
-		} else {
-			dev_dbg(di->dev, "Set BATCTRL current source to 20uA\n");
-			di->curr_source = BTEMP_BATCTRL_CURR_SRC_20UA;
-		}
+		dev_dbg(di->dev, "Set BATCTRL current source to 20uA\n");
+		di->curr_source = BTEMP_BATCTRL_CURR_SRC_20UA;
 	}
 
 	return di->bm->batt_id;
diff --git a/drivers/power/supply/ab8500_charger.c b/drivers/power/supply/ab8500_charger.c
index 5a76c6d343de..ba0e97284ae5 100644
--- a/drivers/power/supply/ab8500_charger.c
+++ b/drivers/power/supply/ab8500_charger.c
@@ -58,9 +58,7 @@
 
 #define MAIN_CH_INPUT_CURR_SHIFT	4
 #define VBUS_IN_CURR_LIM_SHIFT		4
-#define AB8540_VBUS_IN_CURR_LIM_SHIFT	2
 #define AUTO_VBUS_IN_CURR_LIM_SHIFT	4
-#define AB8540_AUTO_VBUS_IN_CURR_MASK	0x3F
 #define VBUS_IN_CURR_LIM_RETRY_SET_TIME	30 /* seconds */
 
 #define LED_INDICATOR_PWM_ENA		0x01
@@ -1138,10 +1136,7 @@ static int ab8500_charger_set_current(struct ab8500_charger *di,
 			no_stepping = true;
 		break;
 	case AB8500_USBCH_IPT_CRNTLVL_REG:
-		if (is_ab8540(di->parent))
-			shift_value = AB8540_VBUS_IN_CURR_LIM_SHIFT;
-		else
-			shift_value = VBUS_IN_CURR_LIM_SHIFT;
+		shift_value = VBUS_IN_CURR_LIM_SHIFT;
 		prev_curr_index = (reg_value >> shift_value);
 		curr_index = ab8500_vbus_in_curr_to_regval(di, ich);
 		step_udelay = STEP_UDELAY * 100;
@@ -1865,67 +1860,6 @@ static int ab8500_charger_update_charger_current(struct ux500_charger *charger,
 	return ret;
 }
 
-/**
- * ab8540_charger_power_path_enable() - enable usb power path mode
- * @charger:	pointer to the ux500_charger structure
- * @enable:	enable/disable flag
- *
- * Enable or disable the power path for usb mode
- * Returns error code in case of failure else 0(on success)
- */
-static int ab8540_charger_power_path_enable(struct ux500_charger *charger,
-		bool enable)
-{
-	int ret;
-	struct ab8500_charger *di;
-
-	if (charger->psy->desc->type == POWER_SUPPLY_TYPE_USB)
-		di = to_ab8500_charger_usb_device_info(charger);
-	else
-		return -ENXIO;
-
-	ret = abx500_mask_and_set_register_interruptible(di->dev,
-				AB8500_CHARGER, AB8540_USB_PP_MODE_REG,
-				BUS_POWER_PATH_MODE_ENA, enable);
-	if (ret) {
-		dev_err(di->dev, "%s write failed\n", __func__);
-		return ret;
-	}
-
-	return ret;
-}
-
-
-/**
- * ab8540_charger_usb_pre_chg_enable() - enable usb pre change
- * @charger:	pointer to the ux500_charger structure
- * @enable:	enable/disable flag
- *
- * Enable or disable the pre-chage for usb mode
- * Returns error code in case of failure else 0(on success)
- */
-static int ab8540_charger_usb_pre_chg_enable(struct ux500_charger *charger,
-		bool enable)
-{
-	int ret;
-	struct ab8500_charger *di;
-
-	if (charger->psy->desc->type == POWER_SUPPLY_TYPE_USB)
-		di = to_ab8500_charger_usb_device_info(charger);
-	else
-		return -ENXIO;
-
-	ret = abx500_mask_and_set_register_interruptible(di->dev,
-				AB8500_CHARGER, AB8540_USB_PP_CHR_REG,
-				BUS_POWER_PATH_PRECHG_ENA, enable);
-	if (ret) {
-		dev_err(di->dev, "%s write failed\n", __func__);
-		return ret;
-	}
-
-	return ret;
-}
-
 static int ab8500_charger_get_ext_psy_data(struct device *dev, void *data)
 {
 	struct power_supply *psy;
@@ -2704,23 +2638,15 @@ static void ab8500_charger_vbus_drop_end_work(struct work_struct *work)
 	abx500_set_register_interruptible(di->dev,
 				  AB8500_CHARGER, AB8500_CHARGER_CTRL, 0x01);
 
-	if (is_ab8540(di->parent))
-		ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER,
-				AB8540_CH_USBCH_STAT3_REG, &reg_value);
-	else
-		ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER,
-				AB8500_CH_USBCH_STAT2_REG, &reg_value);
+	ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER,
+			AB8500_CH_USBCH_STAT2_REG, &reg_value);
 	if (ret < 0) {
 		dev_err(di->dev, "%s read failed\n", __func__);
 		return;
 	}
 
-	if (is_ab8540(di->parent))
-		curr = di->bm->chg_input_curr[
-			reg_value & AB8540_AUTO_VBUS_IN_CURR_MASK];
-	else
-		curr = di->bm->chg_input_curr[
-			reg_value >> AUTO_VBUS_IN_CURR_LIM_SHIFT];
+	curr = di->bm->chg_input_curr[
+		reg_value >> AUTO_VBUS_IN_CURR_LIM_SHIFT];
 
 	if (di->max_usb_in_curr.calculated_max != curr) {
 		/* USB source is collapsing */
@@ -3097,14 +3023,9 @@ static int ab8500_charger_init_hw_registers(struct ab8500_charger *di)
 			goto out;
 		}
 
-		if (is_ab8540(di->parent))
-			ret = abx500_set_register_interruptible(di->dev,
-				AB8500_CHARGER, AB8500_CH_OPT_CRNTLVL_MAX_REG,
-				CH_OP_CUR_LVL_2P);
-		else
-			ret = abx500_set_register_interruptible(di->dev,
-				AB8500_CHARGER, AB8500_CH_OPT_CRNTLVL_MAX_REG,
-				CH_OP_CUR_LVL_1P6);
+		ret = abx500_set_register_interruptible(di->dev,
+			AB8500_CHARGER, AB8500_CH_OPT_CRNTLVL_MAX_REG,
+			CH_OP_CUR_LVL_1P6);
 		if (ret) {
 			dev_err(di->dev,
 				"failed to set CH_OPT_CRNTLVL_MAX_REG\n");
@@ -3112,8 +3033,7 @@ static int ab8500_charger_init_hw_registers(struct ab8500_charger *di)
 		}
 	}
 
-	if (is_ab9540_2p0(di->parent) || is_ab9540_3p0(di->parent)
-	 || is_ab8505_2p0(di->parent) || is_ab8540(di->parent))
+	if (is_ab8505_2p0(di->parent))
 		ret = abx500_mask_and_set_register_interruptible(di->dev,
 			AB8500_CHARGER,
 			AB8500_USBCH_CTRL2_REG,
@@ -3205,17 +3125,6 @@ static int ab8500_charger_init_hw_registers(struct ab8500_charger *di)
 		dev_err(di->dev, "failed to setup backup battery charging\n");
 		goto out;
 	}
-	if (is_ab8540(di->parent)) {
-		ret = abx500_set_register_interruptible(di->dev,
-			AB8500_RTC,
-			AB8500_RTC_CTRL1_REG,
-			bup_vch_range | vbup33_vrtcn);
-		if (ret) {
-			dev_err(di->dev,
-				"failed to setup backup battery charging\n");
-			goto out;
-		}
-	}
 
 	/* Enable backup battery charging */
 	ret = abx500_mask_and_set_register_interruptible(di->dev,
@@ -3226,25 +3135,6 @@ static int ab8500_charger_init_hw_registers(struct ab8500_charger *di)
 		goto out;
 	}
 
-	if (is_ab8540(di->parent)) {
-		ret = abx500_mask_and_set_register_interruptible(di->dev,
-			AB8500_CHARGER, AB8540_USB_PP_MODE_REG,
-			BUS_VSYS_VOL_SELECT_MASK, BUS_VSYS_VOL_SELECT_3P6V);
-		if (ret) {
-			dev_err(di->dev,
-				"failed to setup usb power path vsys voltage\n");
-			goto out;
-		}
-		ret = abx500_mask_and_set_register_interruptible(di->dev,
-			AB8500_CHARGER, AB8540_USB_PP_CHR_REG,
-			BUS_PP_PRECHG_CURRENT_MASK, 0);
-		if (ret) {
-			dev_err(di->dev,
-				"failed to setup usb power path precharge current\n");
-			goto out;
-		}
-	}
-
 out:
 	return ret;
 }
@@ -3529,8 +3419,6 @@ static int ab8500_charger_probe(struct platform_device *pdev)
 	di->usb_chg.ops.check_enable = &ab8500_charger_usb_check_enable;
 	di->usb_chg.ops.kick_wd = &ab8500_charger_watchdog_kick;
 	di->usb_chg.ops.update_curr = &ab8500_charger_update_charger_current;
-	di->usb_chg.ops.pp_enable = &ab8540_charger_power_path_enable;
-	di->usb_chg.ops.pre_chg_enable = &ab8540_charger_usb_pre_chg_enable;
 	di->usb_chg.max_out_volt = ab8500_charger_voltage_map[
 		ARRAY_SIZE(ab8500_charger_voltage_map) - 1];
 	di->usb_chg.max_out_curr =
@@ -3538,7 +3426,6 @@ static int ab8500_charger_probe(struct platform_device *pdev)
 	di->usb_chg.wdt_refresh = CHG_WD_INTERVAL;
 	di->usb_chg.enabled = di->bm->usb_enabled;
 	di->usb_chg.external = false;
-	di->usb_chg.power_path = di->bm->usb_power_path;
 	di->usb_state.usb_current = -1;
 
 	/* Create a work queue for the charger */
diff --git a/drivers/power/supply/ab8500_fg.c b/drivers/power/supply/ab8500_fg.c
index 993898d1712f..d9c6c7bedd85 100644
--- a/drivers/power/supply/ab8500_fg.c
+++ b/drivers/power/supply/ab8500_fg.c
@@ -2326,9 +2326,7 @@ static int ab8500_fg_init_hw_registers(struct ab8500_fg *di)
 		goto out;
 	}
 
-	if (((is_ab8505(di->parent) || is_ab9540(di->parent)) &&
-			abx500_get_chip_id(di->dev) >= AB8500_CUT2P0)
-			|| is_ab8540(di->parent)) {
+	if (is_ab8505(di->parent)) {
 		ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
 			AB8505_RTC_PCUT_MAX_TIME_REG, di->bm->fg_params->pcut_max_time);
 
@@ -2915,9 +2913,7 @@ static int ab8500_fg_sysfs_psy_create_attrs(struct ab8500_fg *di)
 {
 	unsigned int i;
 
-	if (((is_ab8505(di->parent) || is_ab9540(di->parent)) &&
-	     abx500_get_chip_id(di->dev) >= AB8500_CUT2P0)
-	    || is_ab8540(di->parent)) {
+	if (is_ab8505(di->parent)) {
 		for (i = 0; i < ARRAY_SIZE(ab8505_fg_sysfs_psy_attrs); i++)
 			if (device_create_file(&di->fg_psy->dev,
 					       &ab8505_fg_sysfs_psy_attrs[i]))
@@ -2937,9 +2933,7 @@ static void ab8500_fg_sysfs_psy_remove_attrs(struct ab8500_fg *di)
 {
 	unsigned int i;
 
-	if (((is_ab8505(di->parent) || is_ab9540(di->parent)) &&
-	     abx500_get_chip_id(di->dev) >= AB8500_CUT2P0)
-	    || is_ab8540(di->parent)) {
+	if (is_ab8505(di->parent)) {
 		for (i = 0; i < ARRAY_SIZE(ab8505_fg_sysfs_psy_attrs); i++)
 			(void)device_remove_file(&di->fg_psy->dev,
 						 &ab8505_fg_sysfs_psy_attrs[i]);
diff --git a/drivers/power/supply/abx500_chargalg.c b/drivers/power/supply/abx500_chargalg.c
index a4411d6bbc96..947709cdd14e 100644
--- a/drivers/power/supply/abx500_chargalg.c
+++ b/drivers/power/supply/abx500_chargalg.c
@@ -44,9 +44,6 @@
 /* Five minutes expressed in seconds */
 #define FIVE_MINUTES_IN_SECONDS        300
 
-/* Plus margin for the low battery threshold */
-#define BAT_PLUS_MARGIN                (100)
-
 #define CHARGALG_CURR_STEP_LOW		0
 #define CHARGALG_CURR_STEP_HIGH	100
 
@@ -101,7 +98,6 @@ enum abx500_chargalg_states {
 	STATE_HW_TEMP_PROTECT_INIT,
 	STATE_HW_TEMP_PROTECT,
 	STATE_NORMAL_INIT,
-	STATE_USB_PP_PRE_CHARGE,
 	STATE_NORMAL,
 	STATE_WAIT_FOR_RECHARGE_INIT,
 	STATE_WAIT_FOR_RECHARGE,
@@ -133,7 +129,6 @@ static const char *states[] = {
 	"HW_TEMP_PROTECT_INIT",
 	"HW_TEMP_PROTECT",
 	"NORMAL_INIT",
-	"USB_PP_PRE_CHARGE",
 	"NORMAL",
 	"WAIT_FOR_RECHARGE_INIT",
 	"WAIT_FOR_RECHARGE",
@@ -603,37 +598,6 @@ static int abx500_chargalg_usb_en(struct abx500_chargalg *di, int enable,
 	return di->usb_chg->ops.enable(di->usb_chg, enable, vset, iset);
 }
 
- /**
- * ab8540_chargalg_usb_pp_en() - Enable/ disable USB power path
- * @di:                pointer to the abx500_chargalg structure
- * @enable:    power path enable/disable
- *
- * The USB power path will be enable/ disable
- */
-static int ab8540_chargalg_usb_pp_en(struct abx500_chargalg *di, bool enable)
-{
-	if (!di->usb_chg || !di->usb_chg->ops.pp_enable)
-		return -ENXIO;
-
-	return di->usb_chg->ops.pp_enable(di->usb_chg, enable);
-}
-
-/**
- * ab8540_chargalg_usb_pre_chg_en() - Enable/ disable USB pre-charge
- * @di:                pointer to the abx500_chargalg structure
- * @enable:    USB pre-charge enable/disable
- *
- * The USB USB pre-charge will be enable/ disable
- */
-static int ab8540_chargalg_usb_pre_chg_en(struct abx500_chargalg *di,
-					  bool enable)
-{
-	if (!di->usb_chg || !di->usb_chg->ops.pre_chg_enable)
-		return -ENXIO;
-
-	return di->usb_chg->ops.pre_chg_enable(di->usb_chg, enable);
-}
-
 /**
  * abx500_chargalg_update_chg_curr() - Update charger current
  * @di:		pointer to the abx500_chargalg structure
@@ -833,9 +797,6 @@ static void abx500_chargalg_end_of_charge(struct abx500_chargalg *di)
 		di->batt_data.avg_curr > 0) {
 		if (++di->eoc_cnt >= EOC_COND_CNT) {
 			di->eoc_cnt = 0;
-			if ((di->chg_info.charger_type & USB_CHG) &&
-			   (di->usb_chg->power_path))
-				ab8540_chargalg_usb_pp_en(di, true);
 			di->charge_status = POWER_SUPPLY_STATUS_FULL;
 			di->maintenance_chg = true;
 			dev_dbg(di->dev, "EOC reached!\n");
@@ -1536,22 +1497,6 @@ static void abx500_chargalg_algorithm(struct abx500_chargalg *di)
 		break;
 
 	case STATE_NORMAL_INIT:
-		if ((di->chg_info.charger_type & USB_CHG) &&
-				di->usb_chg->power_path) {
-			if (di->batt_data.volt >
-			    (di->bm->fg_params->lowbat_threshold +
-			     BAT_PLUS_MARGIN)) {
-				ab8540_chargalg_usb_pre_chg_en(di, false);
-				ab8540_chargalg_usb_pp_en(di, false);
-			} else {
-				ab8540_chargalg_usb_pp_en(di, true);
-				ab8540_chargalg_usb_pre_chg_en(di, true);
-				abx500_chargalg_state_to(di,
-					STATE_USB_PP_PRE_CHARGE);
-				break;
-			}
-		}
-
 		if (di->curr_status.curr_step == CHARGALG_CURR_STEP_LOW)
 			abx500_chargalg_stop_charging(di);
 		else {
@@ -1575,13 +1520,6 @@ static void abx500_chargalg_algorithm(struct abx500_chargalg *di)
 
 		break;
 
-	case STATE_USB_PP_PRE_CHARGE:
-		if (di->batt_data.volt >
-			(di->bm->fg_params->lowbat_threshold +
-			BAT_PLUS_MARGIN))
-			abx500_chargalg_state_to(di, STATE_NORMAL_INIT);
-		break;
-
 	case STATE_NORMAL:
 		handle_maxim_chg_curr(di);
 		if (di->charge_status == POWER_SUPPLY_STATUS_FULL &&