summaryrefslogtreecommitdiff
path: root/drivers/phy
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/phy')
-rw-r--r--drivers/phy/motorola/phy-cpcap-usb.c128
-rw-r--r--drivers/phy/motorola/phy-mapphone-mdm6600.c11
-rw-r--r--drivers/phy/qualcomm/phy-qcom-qmp.c2
-rw-r--r--drivers/phy/rockchip/phy-rockchip-inno-hdmi.c4
4 files changed, 98 insertions, 47 deletions
diff --git a/drivers/phy/motorola/phy-cpcap-usb.c b/drivers/phy/motorola/phy-cpcap-usb.c
index ead06c6c2601..12e71a315a2c 100644
--- a/drivers/phy/motorola/phy-cpcap-usb.c
+++ b/drivers/phy/motorola/phy-cpcap-usb.c
@@ -115,7 +115,7 @@ struct cpcap_usb_ints_state {
enum cpcap_gpio_mode {
CPCAP_DM_DP,
CPCAP_MDM_RX_TX,
- CPCAP_UNKNOWN,
+ CPCAP_UNKNOWN_DISABLED, /* Seems to disable USB lines */
CPCAP_OTG_DM_DP,
};
@@ -134,6 +134,8 @@ struct cpcap_phy_ddata {
struct iio_channel *id;
struct regulator *vusb;
atomic_t active;
+ unsigned int vbus_provider:1;
+ unsigned int docked:1;
};
static bool cpcap_usb_vbus_valid(struct cpcap_phy_ddata *ddata)
@@ -207,6 +209,19 @@ static int cpcap_phy_get_ints_state(struct cpcap_phy_ddata *ddata,
static int cpcap_usb_set_uart_mode(struct cpcap_phy_ddata *ddata);
static int cpcap_usb_set_usb_mode(struct cpcap_phy_ddata *ddata);
+static void cpcap_usb_try_musb_mailbox(struct cpcap_phy_ddata *ddata,
+ enum musb_vbus_id_status status)
+{
+ int error;
+
+ error = musb_mailbox(status);
+ if (!error)
+ return;
+
+ dev_dbg(ddata->dev, "%s: musb_mailbox failed: %i\n",
+ __func__, error);
+}
+
static void cpcap_usb_detect(struct work_struct *work)
{
struct cpcap_phy_ddata *ddata;
@@ -220,16 +235,66 @@ static void cpcap_usb_detect(struct work_struct *work)
if (error)
return;
- if (s.id_ground) {
- dev_dbg(ddata->dev, "id ground, USB host mode\n");
+ vbus = cpcap_usb_vbus_valid(ddata);
+
+ /* We need to kick the VBUS as USB A-host */
+ if (s.id_ground && ddata->vbus_provider) {
+ dev_dbg(ddata->dev, "still in USB A-host mode, kicking VBUS\n");
+
+ cpcap_usb_try_musb_mailbox(ddata, MUSB_ID_GROUND);
+
+ error = regmap_update_bits(ddata->reg, CPCAP_REG_USBC3,
+ CPCAP_BIT_VBUSSTBY_EN |
+ CPCAP_BIT_VBUSEN_SPI,
+ CPCAP_BIT_VBUSEN_SPI);
+ if (error)
+ goto out_err;
+
+ return;
+ }
+
+ if (vbus && s.id_ground && ddata->docked) {
+ dev_dbg(ddata->dev, "still docked as A-host, signal ID down\n");
+
+ cpcap_usb_try_musb_mailbox(ddata, MUSB_ID_GROUND);
+
+ return;
+ }
+
+ /* No VBUS needed with docks */
+ if (vbus && s.id_ground && !ddata->vbus_provider) {
+ dev_dbg(ddata->dev, "connected to a dock\n");
+
+ ddata->docked = true;
+
error = cpcap_usb_set_usb_mode(ddata);
if (error)
goto out_err;
- error = musb_mailbox(MUSB_ID_GROUND);
+ cpcap_usb_try_musb_mailbox(ddata, MUSB_ID_GROUND);
+
+ /*
+ * Force check state again after musb has reoriented,
+ * otherwise devices won't enumerate after loading PHY
+ * driver.
+ */
+ schedule_delayed_work(&ddata->detect_work,
+ msecs_to_jiffies(1000));
+
+ return;
+ }
+
+ if (s.id_ground && !ddata->docked) {
+ dev_dbg(ddata->dev, "id ground, USB host mode\n");
+
+ ddata->vbus_provider = true;
+
+ error = cpcap_usb_set_usb_mode(ddata);
if (error)
goto out_err;
+ cpcap_usb_try_musb_mailbox(ddata, MUSB_ID_GROUND);
+
error = regmap_update_bits(ddata->reg, CPCAP_REG_USBC3,
CPCAP_BIT_VBUSSTBY_EN |
CPCAP_BIT_VBUSEN_SPI,
@@ -248,43 +313,26 @@ static void cpcap_usb_detect(struct work_struct *work)
vbus = cpcap_usb_vbus_valid(ddata);
+ /* Otherwise assume we're connected to a USB host */
if (vbus) {
- /* Are we connected to a docking station with vbus? */
- if (s.id_ground) {
- dev_dbg(ddata->dev, "connected to a dock\n");
-
- /* No VBUS needed with docks */
- error = cpcap_usb_set_usb_mode(ddata);
- if (error)
- goto out_err;
- error = musb_mailbox(MUSB_ID_GROUND);
- if (error)
- goto out_err;
-
- return;
- }
-
- /* Otherwise assume we're connected to a USB host */
dev_dbg(ddata->dev, "connected to USB host\n");
error = cpcap_usb_set_usb_mode(ddata);
if (error)
goto out_err;
- error = musb_mailbox(MUSB_VBUS_VALID);
- if (error)
- goto out_err;
+ cpcap_usb_try_musb_mailbox(ddata, MUSB_VBUS_VALID);
return;
}
+ ddata->vbus_provider = false;
+ ddata->docked = false;
+ cpcap_usb_try_musb_mailbox(ddata, MUSB_VBUS_OFF);
+
/* Default to debug UART mode */
error = cpcap_usb_set_uart_mode(ddata);
if (error)
goto out_err;
- error = musb_mailbox(MUSB_VBUS_OFF);
- if (error)
- goto out_err;
-
dev_dbg(ddata->dev, "set UART mode\n");
return;
@@ -376,7 +424,8 @@ static int cpcap_usb_set_uart_mode(struct cpcap_phy_ddata *ddata)
{
int error;
- error = cpcap_usb_gpio_set_mode(ddata, CPCAP_DM_DP);
+ /* Disable lines to prevent glitches from waking up mdm6600 */
+ error = cpcap_usb_gpio_set_mode(ddata, CPCAP_UNKNOWN_DISABLED);
if (error)
goto out_err;
@@ -403,6 +452,11 @@ static int cpcap_usb_set_uart_mode(struct cpcap_phy_ddata *ddata)
if (error)
goto out_err;
+ /* Enable UART mode */
+ error = cpcap_usb_gpio_set_mode(ddata, CPCAP_DM_DP);
+ if (error)
+ goto out_err;
+
return 0;
out_err:
@@ -415,7 +469,8 @@ static int cpcap_usb_set_usb_mode(struct cpcap_phy_ddata *ddata)
{
int error;
- error = cpcap_usb_gpio_set_mode(ddata, CPCAP_OTG_DM_DP);
+ /* Disable lines to prevent glitches from waking up mdm6600 */
+ error = cpcap_usb_gpio_set_mode(ddata, CPCAP_UNKNOWN_DISABLED);
if (error)
return error;
@@ -434,12 +489,6 @@ static int cpcap_usb_set_usb_mode(struct cpcap_phy_ddata *ddata)
if (error)
goto out_err;
- error = regmap_update_bits(ddata->reg, CPCAP_REG_USBC2,
- CPCAP_BIT_USBXCVREN,
- CPCAP_BIT_USBXCVREN);
- if (error)
- goto out_err;
-
error = regmap_update_bits(ddata->reg, CPCAP_REG_USBC3,
CPCAP_BIT_PU_SPI |
CPCAP_BIT_DMPD_SPI |
@@ -455,6 +504,11 @@ static int cpcap_usb_set_usb_mode(struct cpcap_phy_ddata *ddata)
if (error)
goto out_err;
+ /* Enable USB mode */
+ error = cpcap_usb_gpio_set_mode(ddata, CPCAP_OTG_DM_DP);
+ if (error)
+ goto out_err;
+
return 0;
out_err:
@@ -649,9 +703,7 @@ static int cpcap_usb_phy_remove(struct platform_device *pdev)
if (error)
dev_err(ddata->dev, "could not set UART mode\n");
- error = musb_mailbox(MUSB_VBUS_OFF);
- if (error)
- dev_err(ddata->dev, "could not set mailbox\n");
+ cpcap_usb_try_musb_mailbox(ddata, MUSB_VBUS_OFF);
usb_remove_phy(&ddata->phy);
cancel_delayed_work_sync(&ddata->detect_work);
diff --git a/drivers/phy/motorola/phy-mapphone-mdm6600.c b/drivers/phy/motorola/phy-mapphone-mdm6600.c
index ee184d5607bd..f20524f0c21d 100644
--- a/drivers/phy/motorola/phy-mapphone-mdm6600.c
+++ b/drivers/phy/motorola/phy-mapphone-mdm6600.c
@@ -200,7 +200,7 @@ static void phy_mdm6600_status(struct work_struct *work)
struct phy_mdm6600 *ddata;
struct device *dev;
DECLARE_BITMAP(values, PHY_MDM6600_NR_STATUS_LINES);
- int error, i, val = 0;
+ int error;
ddata = container_of(work, struct phy_mdm6600, status_work.work);
dev = ddata->dev;
@@ -212,16 +212,11 @@ static void phy_mdm6600_status(struct work_struct *work)
if (error)
return;
- for (i = 0; i < PHY_MDM6600_NR_STATUS_LINES; i++) {
- val |= test_bit(i, values) << i;
- dev_dbg(ddata->dev, "XXX %s: i: %i values[i]: %i val: %i\n",
- __func__, i, test_bit(i, values), val);
- }
- ddata->status = values[0];
+ ddata->status = values[0] & ((1 << PHY_MDM6600_NR_STATUS_LINES) - 1);
dev_info(dev, "modem status: %i %s\n",
ddata->status,
- phy_mdm6600_status_name[ddata->status & 7]);
+ phy_mdm6600_status_name[ddata->status]);
complete(&ddata->ack);
}
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
index 091e20303a14..66f91726b8b2 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -66,7 +66,7 @@
/* QPHY_V3_PCS_MISC_CLAMP_ENABLE register bits */
#define CLAMP_EN BIT(0) /* enables i/o clamp_n */
-#define PHY_INIT_COMPLETE_TIMEOUT 1000
+#define PHY_INIT_COMPLETE_TIMEOUT 10000
#define POWER_DOWN_DELAY_US_MIN 10
#define POWER_DOWN_DELAY_US_MAX 11
diff --git a/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c b/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c
index 2b97fb1185a0..9ca20c947283 100644
--- a/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c
+++ b/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c
@@ -603,6 +603,8 @@ static long inno_hdmi_phy_rk3228_clk_round_rate(struct clk_hw *hw,
{
const struct pre_pll_config *cfg = pre_pll_cfg_table;
+ rate = (rate / 1000) * 1000;
+
for (; cfg->pixclock != 0; cfg++)
if (cfg->pixclock == rate && !cfg->fracdiv)
break;
@@ -755,6 +757,8 @@ static long inno_hdmi_phy_rk3328_clk_round_rate(struct clk_hw *hw,
{
const struct pre_pll_config *cfg = pre_pll_cfg_table;
+ rate = (rate / 1000) * 1000;
+
for (; cfg->pixclock != 0; cfg++)
if (cfg->pixclock == rate)
break;
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-28 19:29:42 +0000