diff options
Diffstat (limited to 'drivers/phy')
| -rw-r--r-- | drivers/phy/tegra/xusb-tegra210.c | 910 |
1 files changed, 910 insertions, 0 deletions
diff --git a/drivers/phy/tegra/xusb-tegra210.c b/drivers/phy/tegra/xusb-tegra210.c index c6de6603f17d..cf9b7f9027dc 100644 --- a/drivers/phy/tegra/xusb-tegra210.c +++ b/drivers/phy/tegra/xusb-tegra210.c @@ -11,8 +11,10 @@ #include <linux/mailbox_client.h> #include <linux/module.h> #include <linux/of.h> +#include <linux/of_platform.h> #include <linux/phy/phy.h> #include <linux/platform_device.h> +#include <linux/regmap.h> #include <linux/regulator/consumer.h> #include <linux/reset.h> #include <linux/slab.h> @@ -52,6 +54,20 @@ #define XUSB_PADCTL_SS_PORT_MAP_PORTX_MAP(x, v) (((v) & 0x7) << ((x) * 5)) #define XUSB_PADCTL_SS_PORT_MAP_PORT_DISABLED 0x7 +#define XUSB_PADCTL_ELPG_PROGRAM_0 0x20 +#define USB2_PORT_WAKE_INTERRUPT_ENABLE(x) BIT((x)) +#define USB2_PORT_WAKEUP_EVENT(x) BIT((x) + 7) +#define SS_PORT_WAKE_INTERRUPT_ENABLE(x) BIT((x) + 14) +#define SS_PORT_WAKEUP_EVENT(x) BIT((x) + 21) +#define USB2_HSIC_PORT_WAKE_INTERRUPT_ENABLE(x) BIT((x) + 28) +#define USB2_HSIC_PORT_WAKEUP_EVENT(x) BIT((x) + 30) +#define ALL_WAKE_EVENTS ( \ + USB2_PORT_WAKEUP_EVENT(0) | USB2_PORT_WAKEUP_EVENT(1) | \ + USB2_PORT_WAKEUP_EVENT(2) | USB2_PORT_WAKEUP_EVENT(3) | \ + SS_PORT_WAKEUP_EVENT(0) | SS_PORT_WAKEUP_EVENT(1) | \ + SS_PORT_WAKEUP_EVENT(2) | SS_PORT_WAKEUP_EVENT(3) | \ + USB2_HSIC_PORT_WAKEUP_EVENT(0)) + #define XUSB_PADCTL_ELPG_PROGRAM1 0x024 #define XUSB_PADCTL_ELPG_PROGRAM1_AUX_MUX_LP0_VCORE_DOWN (1 << 31) #define XUSB_PADCTL_ELPG_PROGRAM1_AUX_MUX_LP0_CLAMP_EN_EARLY (1 << 30) @@ -90,6 +106,8 @@ #define XUSB_PADCTL_USB2_OTG_PAD_CTL1_PD_DR (1 << 2) #define XUSB_PADCTL_USB2_OTG_PAD_CTL1_PD_DISC_OVRD (1 << 1) #define XUSB_PADCTL_USB2_OTG_PAD_CTL1_PD_CHRP_OVRD (1 << 0) +#define RPD_CTRL(x) (((x) & 0x1f) << 26) +#define RPD_CTRL_VALUE(x) (((x) >> 26) & 0x1f) #define XUSB_PADCTL_USB2_BIAS_PAD_CTL0 0x284 #define XUSB_PADCTL_USB2_BIAS_PAD_CTL0_PD (1 << 11) @@ -108,6 +126,8 @@ #define XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_START_TIMER_SHIFT 12 #define XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_START_TIMER_MASK 0x7f #define XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_START_TIMER_VAL 0x1e +#define TCTRL_VALUE(x) (((x) & 0x3f) >> 0) +#define PCTRL_VALUE(x) (((x) >> 6) & 0x3f) #define XUSB_PADCTL_HSIC_PADX_CTL0(x) (0x300 + (x) * 0x20) #define XUSB_PADCTL_HSIC_PAD_CTL0_RPU_STROBE (1 << 18) @@ -251,16 +271,161 @@ #define XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_FLOATING 8 #define XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_GROUNDED 0 +/* USB2 SLEEPWALK registers */ +#define UTMIP(_port, _offset1, _offset2) \ + (((_port) <= 2) ? (_offset1) : (_offset2)) + +#define PMC_UTMIP_UHSIC_SLEEP_CFG(x) UTMIP(x, 0x1fc, 0x4d0) +#define UTMIP_MASTER_ENABLE(x) UTMIP(x, BIT(8 * (x)), BIT(0)) +#define UTMIP_FSLS_USE_PMC(x) UTMIP(x, BIT(8 * (x) + 1), \ + BIT(1)) +#define UTMIP_PCTRL_USE_PMC(x) UTMIP(x, BIT(8 * (x) + 2), \ + BIT(2)) +#define UTMIP_TCTRL_USE_PMC(x) UTMIP(x, BIT(8 * (x) + 3), \ + BIT(3)) +#define UTMIP_WAKE_VAL(_port, _value) (((_value) & 0xf) << \ + (UTMIP(_port, 8 * (_port) + 4, 4))) +#define UTMIP_WAKE_VAL_NONE(_port) UTMIP_WAKE_VAL(_port, 12) +#define UTMIP_WAKE_VAL_ANY(_port) UTMIP_WAKE_VAL(_port, 15) + +#define PMC_UTMIP_UHSIC_SLEEP_CFG1 (0x4d0) +#define UTMIP_RPU_SWITC_LOW_USE_PMC_PX(x) BIT((x) + 8) +#define UTMIP_RPD_CTRL_USE_PMC_PX(x) BIT((x) + 16) + +#define PMC_UTMIP_MASTER_CONFIG (0x274) +#define UTMIP_PWR(x) UTMIP(x, BIT(x), BIT(4)) +#define UHSIC_PWR BIT(3) + +#define PMC_USB_DEBOUNCE_DEL (0xec) +#define DEBOUNCE_VAL(x) (((x) & 0xffff) << 0) +#define UTMIP_LINE_DEB_CNT(x) (((x) & 0xf) << 16) +#define UHSIC_LINE_DEB_CNT(x) (((x) & 0xf) << 20) + +#define PMC_UTMIP_UHSIC_FAKE(x) UTMIP(x, 0x218, 0x294) +#define UTMIP_FAKE_USBOP_VAL(x) UTMIP(x, BIT(4 * (x)), BIT(8)) +#define UTMIP_FAKE_USBON_VAL(x) UTMIP(x, BIT(4 * (x) + 1), \ + BIT(9)) +#define UTMIP_FAKE_USBOP_EN(x) UTMIP(x, BIT(4 * (x) + 2), \ + BIT(10)) +#define UTMIP_FAKE_USBON_EN(x) UTMIP(x, BIT(4 * (x) + 3), \ + BIT(11)) + +#define PMC_UTMIP_UHSIC_SLEEPWALK_CFG(x) UTMIP(x, 0x200, 0x288) +#define UTMIP_LINEVAL_WALK_EN(x) UTMIP(x, BIT(8 * (x) + 7), \ + BIT(15)) + +#define PMC_USB_AO (0xf0) +#define USBOP_VAL_PD(x) UTMIP(x, BIT(4 * (x)), BIT(20)) +#define USBON_VAL_PD(x) UTMIP(x, BIT(4 * (x) + 1), \ + BIT(21)) +#define STROBE_VAL_PD BIT(12) +#define DATA0_VAL_PD BIT(13) +#define DATA1_VAL_PD BIT(24) + +#define PMC_UTMIP_UHSIC_SAVED_STATE(x) UTMIP(x, 0x1f0, 0x280) +#define SPEED(_port, _value) (((_value) & 0x3) << \ + (UTMIP(_port, 8 * (_port), 8))) +#define UTMI_HS(_port) SPEED(_port, 0) +#define UTMI_FS(_port) SPEED(_port, 1) +#define UTMI_LS(_port) SPEED(_port, 2) +#define UTMI_RST(_port) SPEED(_port, 3) + +#define PMC_UTMIP_UHSIC_TRIGGERS (0x1ec) +#define UTMIP_CLR_WALK_PTR(x) UTMIP(x, BIT(x), BIT(16)) +#define UTMIP_CAP_CFG(x) UTMIP(x, BIT((x) + 4), BIT(17)) +#define UTMIP_CLR_WAKE_ALARM(x) UTMIP(x, BIT((x) + 12), \ + BIT(19)) +#define UHSIC_CLR_WALK_PTR BIT(3) +#define UHSIC_CLR_WAKE_ALARM BIT(15) + +#define PMC_UTMIP_SLEEPWALK_PX(x) UTMIP(x, 0x204 + (4 * (x)), \ + 0x4e0) +/* phase A */ +#define UTMIP_USBOP_RPD_A BIT(0) +#define UTMIP_USBON_RPD_A BIT(1) +#define UTMIP_AP_A BIT(4) +#define UTMIP_AN_A BIT(5) +#define UTMIP_HIGHZ_A BIT(6) +/* phase B */ +#define UTMIP_USBOP_RPD_B BIT(8) +#define UTMIP_USBON_RPD_B BIT(9) +#define UTMIP_AP_B BIT(12) +#define UTMIP_AN_B BIT(13) +#define UTMIP_HIGHZ_B BIT(14) +/* phase C */ +#define UTMIP_USBOP_RPD_C BIT(16) +#define UTMIP_USBON_RPD_C BIT(17) +#define UTMIP_AP_C BIT(20) +#define UTMIP_AN_C BIT(21) +#define UTMIP_HIGHZ_C BIT(22) +/* phase D */ +#define UTMIP_USBOP_RPD_D BIT(24) +#define UTMIP_USBON_RPD_D BIT(25) +#define UTMIP_AP_D BIT(28) +#define UTMIP_AN_D BIT(29) +#define UTMIP_HIGHZ_D BIT(30) + +#define PMC_UTMIP_UHSIC_LINE_WAKEUP (0x26c) +#define UTMIP_LINE_WAKEUP_EN(x) UTMIP(x, BIT(x), BIT(4)) +#define UHSIC_LINE_WAKEUP_EN BIT(3) + +#define PMC_UTMIP_TERM_PAD_CFG (0x1f8) +#define PCTRL_VAL(x) (((x) & 0x3f) << 1) +#define TCTRL_VAL(x) (((x) & 0x3f) << 7) + +#define PMC_UTMIP_PAD_CFGX(x) (0x4c0 + (4 * (x))) +#define RPD_CTRL_PX(x) (((x) & 0x1f) << 22) + +#define PMC_UHSIC_SLEEP_CFG PMC_UTMIP_UHSIC_SLEEP_CFG(0) +#define UHSIC_MASTER_ENABLE BIT(24) +#define UHSIC_WAKE_VAL(_value) (((_value) & 0xf) << 28) +#define UHSIC_WAKE_VAL_SD10 UHSIC_WAKE_VAL(2) +#define UHSIC_WAKE_VAL_NONE UHSIC_WAKE_VAL(12) + +#define PMC_UHSIC_FAKE PMC_UTMIP_UHSIC_FAKE(0) +#define UHSIC_FAKE_STROBE_VAL BIT(12) +#define UHSIC_FAKE_DATA_VAL BIT(13) +#define UHSIC_FAKE_STROBE_EN BIT(14) +#define UHSIC_FAKE_DATA_EN BIT(15) + +#define PMC_UHSIC_SAVED_STATE PMC_UTMIP_UHSIC_SAVED_STATE(0) +#define UHSIC_MODE(_value) (((_value) & 0x1) << 24) +#define UHSIC_HS UHSIC_MODE(0) +#define UHSIC_RST UHSIC_MODE(1) + +#define PMC_UHSIC_SLEEPWALK_CFG PMC_UTMIP_UHSIC_SLEEPWALK_CFG(0) +#define UHSIC_WAKE_WALK_EN BIT(30) +#define UHSIC_LINEVAL_WALK_EN BIT(31) + +#define PMC_UHSIC_SLEEPWALK_P0 (0x210) +#define UHSIC_DATA0_RPD_A BIT(1) +#define UHSIC_DATA0_RPU_B BIT(11) +#define UHSIC_DATA0_RPU_C BIT(19) +#define UHSIC_DATA0_RPU_D BIT(27) +#define UHSIC_STROBE_RPU_A BIT(2) +#define UHSIC_STROBE_RPD_B BIT(8) +#define UHSIC_STROBE_RPD_C BIT(16) +#define UHSIC_STROBE_RPD_D BIT(24) + struct tegra210_xusb_fuse_calibration { u32 hs_curr_level[4]; u32 hs_term_range_adj; u32 rpd_ctrl; }; +struct tegra210_xusb_padctl_context { + u32 usb2_pad_mux; + u32 usb2_port_cap; + u32 ss_port_map; + u32 usb3_pad_mux; +}; + struct tegra210_xusb_padctl { struct tegra_xusb_padctl base; + struct regmap *regmap; struct tegra210_xusb_fuse_calibration fuse; + struct tegra210_xusb_padctl_context context; }; static inline struct tegra210_xusb_padctl * @@ -890,6 +1055,643 @@ static int tegra210_hsic_set_idle(struct tegra_xusb_padctl *padctl, return 0; } +static int tegra210_usb3_enable_phy_sleepwalk(struct tegra_xusb_lane *lane, + enum usb_device_speed speed) +{ + struct tegra_xusb_padctl *padctl = lane->pad->padctl; + int port = tegra210_usb3_lane_map(lane); + struct device *dev = padctl->dev; + u32 value; + + if (port < 0) { + dev_err(dev, "invalid usb3 port number\n"); + return -EINVAL; + } + + mutex_lock(&padctl->lock); + + value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM1); + value |= XUSB_PADCTL_ELPG_PROGRAM1_SSPX_ELPG_CLAMP_EN_EARLY(port); + padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM1); + + usleep_range(100, 200); + + value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM1); + value |= XUSB_PADCTL_ELPG_PROGRAM1_SSPX_ELPG_CLAMP_EN(port); + padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM1); + + usleep_range(250, 350); + + mutex_unlock(&padctl->lock); + + return 0; +} + +static int tegra210_usb3_disable_phy_sleepwalk(struct tegra_xusb_lane *lane) +{ + struct tegra_xusb_padctl *padctl = lane->pad->padctl; + int port = tegra210_usb3_lane_map(lane); + struct device *dev = padctl->dev; + u32 value; + + if (port < 0) { + dev_err(dev, "invalid usb3 port number\n"); + return -EINVAL; + } + + mutex_lock(&padctl->lock); + + value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM1); + value &= ~XUSB_PADCTL_ELPG_PROGRAM1_SSPX_ELPG_CLAMP_EN_EARLY(port); + padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM1); + + usleep_range(100, 200); + + value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM1); + value &= ~XUSB_PADCTL_ELPG_PROGRAM1_SSPX_ELPG_CLAMP_EN(port); + padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM1); + + mutex_unlock(&padctl->lock); + + return 0; +} + +static int tegra210_usb3_enable_phy_wake(struct tegra_xusb_lane *lane) +{ + struct tegra_xusb_padctl *padctl = lane->pad->padctl; + int port = tegra210_usb3_lane_map(lane); + struct device *dev = padctl->dev; + u32 value; + + if (port < 0) { + dev_err(dev, "invalid usb3 port number\n"); + return -EINVAL; + } + + mutex_lock(&padctl->lock); + + value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_0); + value &= ~ALL_WAKE_EVENTS; + value |= SS_PORT_WAKEUP_EVENT(port); + padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_0); + + usleep_range(10, 20); + + value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_0); + value &= ~ALL_WAKE_EVENTS; + value |= SS_PORT_WAKE_INTERRUPT_ENABLE(port); + padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_0); + + mutex_unlock(&padctl->lock); + + return 0; +} + +static int tegra210_usb3_disable_phy_wake(struct tegra_xusb_lane *lane) +{ + struct tegra_xusb_padctl *padctl = lane->pad->padctl; + int port = tegra210_usb3_lane_map(lane); + struct device *dev = padctl->dev; + u32 value; + + if (port < 0) { + dev_err(dev, "invalid usb3 port number\n"); + return -EINVAL; + } + + mutex_lock(&padctl->lock); + + value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_0); + value &= ~ALL_WAKE_EVENTS; + value &= ~SS_PORT_WAKE_INTERRUPT_ENABLE(port); + padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_0); + + usleep_range(10, 20); + + value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_0); + value &= ~ALL_WAKE_EVENTS; + value |= SS_PORT_WAKEUP_EVENT(port); + padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_0); + + mutex_unlock(&padctl->lock); + + return 0; +} + +static bool tegra210_usb3_phy_remote_wake_detected(struct tegra_xusb_lane *lane) +{ + struct tegra_xusb_padctl *padctl = lane->pad->padctl; + int index = tegra210_usb3_lane_map(lane); + u32 value; + + if (index < 0) + return false; + + value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_0); + if ((value & SS_PORT_WAKE_INTERRUPT_ENABLE(index)) && (value & SS_PORT_WAKEUP_EVENT(index))) + return true; + + return false; +} + +static int tegra210_utmi_enable_phy_wake(struct tegra_xusb_lane *lane) +{ + struct tegra_xusb_padctl *padctl = lane->pad->padctl; + unsigned int index = lane->index; + u32 value; + + mutex_lock(&padctl->lock); + + value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_0); + value &= ~ALL_WAKE_EVENTS; + value |= USB2_PORT_WAKEUP_EVENT(index); + padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_0); + + usleep_range(10, 20); + + value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_0); + value &= ~ALL_WAKE_EVENTS; + value |= USB2_PORT_WAKE_INTERRUPT_ENABLE(index); + padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_0); + + mutex_unlock(&padctl->lock); + + return 0; +} + +static int tegra210_utmi_disable_phy_wake(struct tegra_xusb_lane *lane) +{ + struct tegra_xusb_padctl *padctl = lane->pad->padctl; + unsigned int index = lane->index; + u32 value; + + mutex_lock(&padctl->lock); + + value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_0); + value &= ~ALL_WAKE_EVENTS; + value &= ~USB2_PORT_WAKE_INTERRUPT_ENABLE(index); + padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_0); + + usleep_range(10, 20); + + value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_0); + value &= ~ALL_WAKE_EVENTS; + value |= USB2_PORT_WAKEUP_EVENT(index); + padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_0); + + mutex_unlock(&padctl->lock); + + return 0; +} + +static bool tegra210_utmi_phy_remote_wake_detected(struct tegra_xusb_lane *lane) +{ + struct tegra_xusb_padctl *padctl = lane->pad->padctl; + unsigned int index = lane->index; + u32 value; + + value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_0); + if ((value & USB2_PORT_WAKE_INTERRUPT_ENABLE(index)) && + (value & USB2_PORT_WAKEUP_EVENT(index))) + return true; + + return false; +} + +static int tegra210_hsic_enable_phy_wake(struct tegra_xusb_lane *lane) +{ + struct tegra_xusb_padctl *padctl = lane->pad->padctl; + unsigned int index = lane->index; + u32 value; + + mutex_lock(&padctl->lock); + + value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_0); + value &= ~ALL_WAKE_EVENTS; + value |= USB2_HSIC_PORT_WAKEUP_EVENT(index); + padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_0); + + usleep_range(10, 20); + + value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_0); + value &= ~ALL_WAKE_EVENTS; + value |= USB2_HSIC_PORT_WAKE_INTERRUPT_ENABLE(index); + padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_0); + + mutex_unlock(&padctl->lock); + + return 0; +} + +static int tegra210_hsic_disable_phy_wake(struct tegra_xusb_lane *lane) +{ + struct tegra_xusb_padctl *padctl = lane->pad->padctl; + unsigned int index = lane->index; + u32 value; + + mutex_lock(&padctl->lock); + + value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_0); + value &= ~ALL_WAKE_EVENTS; + value &= ~USB2_HSIC_PORT_WAKE_INTERRUPT_ENABLE(index); + padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_0); + + usleep_range(10, 20); + + value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_0); + value &= ~ALL_WAKE_EVENTS; + value |= USB2_HSIC_PORT_WAKEUP_EVENT(index); + padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_0); + + mutex_unlock(&padctl->lock); + + return 0; +} + +static bool tegra210_hsic_phy_remote_wake_detected(struct tegra_xusb_lane *lane) +{ + struct tegra_xusb_padctl *padctl = lane->pad->padctl; + unsigned int index = lane->index; + u32 value; + + value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_0); + if ((value & USB2_HSIC_PORT_WAKE_INTERRUPT_ENABLE(index)) && + (value & USB2_HSIC_PORT_WAKEUP_EVENT(index))) + return true; + + return false; +} + +#define padctl_pmc_readl(_priv, _offset) \ +({ \ + u32 value; \ + WARN(regmap_read(_priv->regmap, _offset, &value), "read %s failed\n", #_offset);\ + value; \ +}) + +#define padctl_pmc_writel(_priv, _value, _offset) \ + WARN(regmap_write(_priv->regmap, _offset, _value), "write %s failed\n", #_offset) + +static int tegra210_pmc_utmi_enable_phy_sleepwalk(struct tegra_xusb_lane *lane, + enum usb_device_speed speed) +{ + struct tegra_xusb_padctl *padctl = lane->pad->padctl; + struct tegra210_xusb_padctl *priv = to_tegra210_xusb_padctl(padctl); + unsigned int port = lane->index; + u32 value, tctrl, pctrl, rpd_ctrl; + + if (!priv->regmap) + return -EOPNOTSUPP; + + if (speed > USB_SPEED_HIGH) + return -EINVAL; + + value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL1); + tctrl = TCTRL_VALUE(value); + pctrl = PCTRL_VALUE(value); + + value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL1(port)); + rpd_ctrl = RPD_CTRL_VALUE(value); + + /* ensure sleepwalk logic is disabled */ + value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_SLEEP_CFG(port)); + value &= ~UTMIP_MASTER_ENABLE(port); + padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_SLEEP_CFG(port)); + + /* ensure sleepwalk logics are in low power mode */ + value = padctl_pmc_readl(priv, PMC_UTMIP_MASTER_CONFIG); + value |= UTMIP_PWR(port); + padctl_pmc_writel(priv, value, PMC_UTMIP_MASTER_CONFIG); + + /* set debounce time */ + value = padctl_pmc_readl(priv, PMC_USB_DEBOUNCE_DEL); + value &= ~UTMIP_LINE_DEB_CNT(~0); + value |= UTMIP_LINE_DEB_CNT(0x1); + padctl_pmc_writel(priv, value, PMC_USB_DEBOUNCE_DEL); + + /* ensure fake events of sleepwalk logic are desiabled */ + value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_FAKE(port)); + value &= ~(UTMIP_FAKE_USBOP_VAL(port) | UTMIP_FAKE_USBON_VAL(port) | + UTMIP_FAKE_USBOP_EN(port) | UTMIP_FAKE_USBON_EN(port)); + padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_FAKE(port)); + + /* ensure wake events of sleepwalk logic are not latched */ + value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_LINE_WAKEUP); + value &= ~UTMIP_LINE_WAKEUP_EN(port); + padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_LINE_WAKEUP); + + /* disable wake event triggers of sleepwalk logic */ + value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_SLEEP_CFG(port)); + value &= ~UTMIP_WAKE_VAL(port, ~0); + value |= UTMIP_WAKE_VAL_NONE(port); + padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_SLEEP_CFG(port)); + + /* power down the line state detectors of the pad */ + value = padctl_pmc_readl(priv, PMC_USB_AO); + value |= (USBOP_VAL_PD(port) | USBON_VAL_PD(port)); + padctl_pmc_writel(priv, value, PMC_USB_AO); + + /* save state per speed */ + value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_SAVED_STATE(port)); + value &= ~SPEED(port, ~0); + + switch (speed) { + case USB_SPEED_HIGH: + value |= UTMI_HS(port); + break; + + case USB_SPEED_FULL: + value |= UTMI_FS(port); + break; + + case USB_SPEED_LOW: + value |= UTMI_LS(port); + break; + + default: + value |= UTMI_RST(port); + break; + } + + padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_SAVED_STATE(port)); + + /* enable the trigger of the sleepwalk logic */ + value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_SLEEPWALK_CFG(port)); + value |= UTMIP_LINEVAL_WALK_EN(port); + padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_SLEEPWALK_CFG(port)); + + /* + * Reset the walk pointer and clear the alarm of the sleepwalk logic, + * as well as capture the configuration of the USB2.0 pad. + */ + value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_TRIGGERS); + value |= UTMIP_CLR_WALK_PTR(port) | UTMIP_CLR_WAKE_ALARM(port) | UTMIP_CAP_CFG(port); + padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_TRIGGERS); + + /* program electrical parameters read from XUSB PADCTL */ + value = padctl_pmc_readl(priv, PMC_UTMIP_TERM_PAD_CFG); + value &= ~(TCTRL_VAL(~0) | PCTRL_VAL(~0)); + value |= (TCTRL_VAL(tctrl) | PCTRL_VAL(pctrl)); + padctl_pmc_writel(priv, value, PMC_UTMIP_TERM_PAD_CFG); + + value = padctl_pmc_readl(priv, PMC_UTMIP_PAD_CFGX(port)); + value &= ~RPD_CTRL_PX(~0); + value |= RPD_CTRL_PX(rpd_ctrl); + padctl_pmc_writel(priv, value, PMC_UTMIP_PAD_CFGX(port)); + + /* + * Set up the pull-ups and pull-downs of the signals during the four + * stages of sleepwalk. If a device is connected, program sleepwalk + * logic to maintain a J and keep driving K upon seeing remote wake. + */ + value = padctl_pmc_readl(priv, PMC_UTMIP_SLEEPWALK_PX(port)); + value = UTMIP_USBOP_RPD_A | UTMIP_USBOP_RPD_B | UTMIP_USBOP_RPD_C | UTMIP_USBOP_RPD_D; + value |= UTMIP_USBON_RPD_A | UTMIP_USBON_RPD_B | UTMIP_USBON_RPD_C | UTMIP_USBON_RPD_D; + + switch (speed) { + case USB_SPEED_HIGH: + case USB_SPEED_FULL: + /* J state: D+/D- = high/low, K state: D+/D- = low/high */ + value |= UTMIP_HIGHZ_A; + value |= UTMIP_AP_A; + value |= UTMIP_AN_B | UTMIP_AN_C | UTMIP_AN_D; + break; + + case USB_SPEED_LOW: + /* J state: D+/D- = low/high, K state: D+/D- = high/low */ + value |= UTMIP_HIGHZ_A; + value |= UTMIP_AN_A; + value |= UTMIP_AP_B | UTMIP_AP_C | UTMIP_AP_D; + break; + + default: + value |= UTMIP_HIGHZ_A | UTMIP_HIGHZ_B | UTMIP_HIGHZ_C | UTMIP_HIGHZ_D; + break; + } + + padctl_pmc_writel(priv, value, PMC_UTMIP_SLEEPWALK_PX(port)); + + /* power up the line state detectors of the pad */ + value = padctl_pmc_readl(priv, PMC_USB_AO); + value &= ~(USBOP_VAL_PD(port) | USBON_VAL_PD(port)); + padctl_pmc_writel(priv, value, PMC_USB_AO); + + usleep_range(50, 100); + + /* switch the electric control of the USB2.0 pad to PMC */ + value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_SLEEP_CFG(port)); + value |= UTMIP_FSLS_USE_PMC(port) | UTMIP_PCTRL_USE_PMC(port) | UTMIP_TCTRL_USE_PMC(port); + padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_SLEEP_CFG(port)); + + value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_SLEEP_CFG1); + value |= UTMIP_RPD_CTRL_USE_PMC_PX(port) | UTMIP_RPU_SWITC_LOW_USE_PMC_PX(port); + padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_SLEEP_CFG1); + + /* set the wake signaling trigger events */ + value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_SLEEP_CFG(port)); + value &= ~UTMIP_WAKE_VAL(port, ~0); + value |= UTMIP_WAKE_VAL_ANY(port); + padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_SLEEP_CFG(port)); + + /* enable the wake detection */ + value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_SLEEP_CFG(port)); + value |= UTMIP_MASTER_ENABLE(port); + padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_SLEEP_CFG(port)); + + value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_LINE_WAKEUP); + value |= UTMIP_LINE_WAKEUP_EN(port); + padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_LINE_WAKEUP); + + return 0; +} + +static int tegra210_pmc_utmi_disable_phy_sleepwalk(struct tegra_xusb_lane *lane) +{ + struct tegra_xusb_padctl *padctl = lane->pad->padctl; + struct tegra210_xusb_padctl *priv = to_tegra210_xusb_padctl(padctl); + unsigned int port = lane->index; + u32 value; + + if (!priv->regmap) + return -EOPNOTSUPP; + + /* disable the wake detection */ + value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_SLEEP_CFG(port)); + value &= ~UTMIP_MASTER_ENABLE(port); + padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_SLEEP_CFG(port)); + + value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_LINE_WAKEUP); + value &= ~UTMIP_LINE_WAKEUP_EN(port); + padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_LINE_WAKEUP); + + /* switch the electric control of the USB2.0 pad to XUSB or USB2 */ + value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_SLEEP_CFG(port)); + value &= ~(UTMIP_FSLS_USE_PMC(port) | UTMIP_PCTRL_USE_PMC(port) | + UTMIP_TCTRL_USE_PMC(port)); + padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_SLEEP_CFG(port)); + + value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_SLEEP_CFG1); + value &= ~(UTMIP_RPD_CTRL_USE_PMC_PX(port) | UTMIP_RPU_SWITC_LOW_USE_PMC_PX(port)); + padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_SLEEP_CFG1); + + /* disable wake event triggers of sleepwalk logic */ + value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_SLEEP_CFG(port)); + value &= ~UTMIP_WAKE_VAL(port, ~0); + value |= UTMIP_WAKE_VAL_NONE(port); + padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_SLEEP_CFG(port)); + + /* power down the line state detectors of the port */ + value = padctl_pmc_readl(priv, PMC_USB_AO); + value |= (USBOP_VAL_PD(port) | USBON_VAL_PD(port)); + padctl_pmc_writel(priv, value, PMC_USB_AO); + + /* clear alarm of the sleepwalk logic */ + value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_TRIGGERS); + value |= UTMIP_CLR_WAKE_ALARM(port); + padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_TRIGGERS); + + return 0; +} + +static int tegra210_pmc_hsic_enable_phy_sleepwalk(struct tegra_xusb_lane *lane, + enum usb_device_speed speed) +{ + struct tegra_xusb_padctl *padctl = lane->pad->padctl; + struct tegra210_xusb_padctl *priv = to_tegra210_xusb_padctl(padctl); + u32 value; + + if (!priv->regmap) + return -EOPNOTSUPP; + + /* ensure sleepwalk logic is disabled */ + value = padctl_pmc_readl(priv, PMC_UHSIC_SLEEP_CFG); + value &= ~UHSIC_MASTER_ENABLE; + padctl_pmc_writel(priv, value, PMC_UHSIC_SLEEP_CFG); + + /* ensure sleepwalk logics are in low power mode */ + value = padctl_pmc_readl(priv, PMC_UTMIP_MASTER_CONFIG); + value |= UHSIC_PWR; + padctl_pmc_writel(priv, value, PMC_UTMIP_MASTER_CONFIG); + + /* set debounce time */ + value = padctl_pmc_readl(priv, PMC_USB_DEBOUNCE_DEL); + value &= ~UHSIC_LINE_DEB_CNT(~0); + value |= UHSIC_LINE_DEB_CNT(0x1); + padctl_pmc_writel(priv, value, PMC_USB_DEBOUNCE_DEL); + + /* ensure fake events of sleepwalk logic are desiabled */ + value = padctl_pmc_readl(priv, PMC_UHSIC_FAKE); + value &= ~(UHSIC_FAKE_STROBE_VAL | UHSIC_FAKE_DATA_VAL | + UHSIC_FAKE_STROBE_EN | UHSIC_FAKE_DATA_EN); + padctl_pmc_writel(priv, value, PMC_UHSIC_FAKE); + + /* ensure wake events of sleepwalk logic are not latched */ + value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_LINE_WAKEUP); + value &= ~UHSIC_LINE_WAKEUP_EN; + padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_LINE_WAKEUP); + + /* disable wake event triggers of sleepwalk logic */ + value = padctl_pmc_readl(priv, PMC_UHSIC_SLEEP_CFG); + value &= ~UHSIC_WAKE_VAL(~0); + value |= UHSIC_WAKE_VAL_NONE; + padctl_pmc_writel(priv, value, PMC_UHSIC_SLEEP_CFG); + + /* power down the line state detectors of the port */ + value = padctl_pmc_readl(priv, PMC_USB_AO); + value |= STROBE_VAL_PD | DATA0_VAL_PD | DATA1_VAL_PD; + padctl_pmc_writel(priv, value, PMC_USB_AO); + + /* save state, HSIC always comes up as HS */ + value = padctl_pmc_readl(priv, PMC_UHSIC_SAVED_STATE); + value &= ~UHSIC_MODE(~0); + value |= UHSIC_HS; + padctl_pmc_writel(priv, value, PMC_UHSIC_SAVED_STATE); + + /* enable the trigger of the sleepwalk logic */ + value = padctl_pmc_readl(priv, PMC_UHSIC_SLEEPWALK_CFG); + value |= UHSIC_WAKE_WALK_EN | UHSIC_LINEVAL_WALK_EN; + padctl_pmc_writel(priv, value, PMC_UHSIC_SLEEPWALK_CFG); + + /* + * Reset the walk pointer and clear the alarm of the sleepwalk logic, + * as well as capture the configuration of the USB2.0 port. + */ + value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_TRIGGERS); + value |= UHSIC_CLR_WALK_PTR | UHSIC_CLR_WAKE_ALARM; + padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_TRIGGERS); + + /* + * Set up the pull-ups and pull-downs of the signals during the four + * stages of sleepwalk. Maintain a HSIC IDLE and keep driving HSIC + * RESUME upon remote wake. + */ + value = padctl_pmc_readl(priv, PMC_UHSIC_SLEEPWALK_P0); + value = UHSIC_DATA0_RPD_A | UHSIC_DATA0_RPU_B | UHSIC_DATA0_RPU_C | UHSIC_DATA0_RPU_D | + UHSIC_STROBE_RPU_A | UHSIC_STROBE_RPD_B | UHSIC_STROBE_RPD_C | UHSIC_STROBE_RPD_D; + padctl_pmc_writel(priv, value, PMC_UHSIC_SLEEPWALK_P0); + + /* power up the line state detectors of the port */ + value = padctl_pmc_readl(priv, PMC_USB_AO); + value &= ~(STROBE_VAL_PD | DATA0_VAL_PD | DATA1_VAL_PD); + padctl_pmc_writel(priv, value, PMC_USB_AO); + + usleep_range(50, 100); + + /* set the wake signaling trigger events */ + value = padctl_pmc_readl(priv, PMC_UHSIC_SLEEP_CFG); + value &= ~UHSIC_WAKE_VAL(~0); + value |= UHSIC_WAKE_VAL_SD10; + padctl_pmc_writel(priv, value, PMC_UHSIC_SLEEP_CFG); + + /* enable the wake detection */ + value = padctl_pmc_readl(priv, PMC_UHSIC_SLEEP_CFG); + value |= UHSIC_MASTER_ENABLE; + padctl_pmc_writel(priv, value, PMC_UHSIC_SLEEP_CFG); + + value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_LINE_WAKEUP); + value |= UHSIC_LINE_WAKEUP_EN; + padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_LINE_WAKEUP); + + return 0; +} + +static int tegra210_pmc_hsic_disable_phy_sleepwalk(struct tegra_xusb_lane *lane) +{ + struct tegra_xusb_padctl *padctl = lane->pad->padctl; + struct tegra210_xusb_padctl *priv = to_tegra210_xusb_padctl(padctl); + u32 value; + + if (!priv->regmap) + return -EOPNOTSUPP; + + /* disable the wake detection */ + value = padctl_pmc_readl(priv, PMC_UHSIC_SLEEP_CFG); + value &= ~UHSIC_MASTER_ENABLE; + padctl_pmc_writel(priv, value, PMC_UHSIC_SLEEP_CFG); + + value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_LINE_WAKEUP); + value &= ~UHSIC_LINE_WAKEUP_EN; + padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_LINE_WAKEUP); + + /* disable wake event triggers of sleepwalk logic */ + value = padctl_pmc_readl(priv, PMC_UHSIC_SLEEP_CFG); + value &= ~UHSIC_WAKE_VAL(~0); + value |= UHSIC_WAKE_VAL_NONE; + padctl_pmc_writel(priv, value, PMC_UHSIC_SLEEP_CFG); + + /* power down the line state detectors of the port */ + value = padctl_pmc_readl(priv, PMC_USB_AO); + value |= STROBE_VAL_PD | DATA0_VAL_PD | DATA1_VAL_PD; + padctl_pmc_writel(priv, value, PMC_USB_AO); + + /* clear alarm of the sleepwalk logic */ + value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_TRIGGERS); + value |= UHSIC_CLR_WAKE_ALARM; + padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_TRIGGERS); + + return 0; +} + static int tegra210_usb3_set_lfps_detect(struct tegra_xusb_padctl *padctl, unsigned int index, bool enable) { @@ -986,6 +1788,11 @@ static void tegra210_usb2_lane_remove(struct tegra_xusb_lane *lane) static const struct tegra_xusb_lane_ops tegra210_usb2_lane_ops = { .probe = tegra210_usb2_lane_probe, .remove = tegra210_usb2_lane_remove, + .enable_phy_sleepwalk = tegra210_pmc_utmi_enable_phy_sleepwalk, + .disable_phy_sleepwalk = tegra210_pmc_utmi_disable_phy_sleepwalk, + .enable_phy_wake = tegra210_utmi_enable_phy_wake, + .disable_phy_wake = tegra210_utmi_disable_phy_wake, + .remote_wake_detected = tegra210_utmi_phy_remote_wake_detected, }; static int tegra210_usb2_phy_init(struct phy *phy) @@ -1449,6 +2256,11 @@ static void tegra210_hsic_lane_remove(struct tegra_xusb_lane *lane) static const struct tegra_xusb_lane_ops tegra210_hsic_lane_ops = { .probe = tegra210_hsic_lane_probe, .remove = tegra210_hsic_lane_remove, + .enable_phy_sleepwalk = tegra210_pmc_hsic_enable_phy_sleepwalk, + .disable_phy_sleepwalk = tegra210_pmc_hsic_disable_phy_sleepwalk, + .enable_phy_wake = tegra210_hsic_enable_phy_wake, + .disable_phy_wake = tegra210_hsic_disable_phy_wake, + .remote_wake_detected = tegra210_hsic_phy_remote_wake_detected, }; static int tegra210_hsic_phy_init(struct phy *phy) @@ -1879,6 +2691,11 @@ static const struct tegra_xusb_lane_ops tegra210_pcie_lane_ops = { .remove = tegra210_pcie_lane_remove, .iddq_enable = tegra210_uphy_lane_iddq_enable, .iddq_disable = tegra210_uphy_lane_iddq_disable, + .enable_phy_sleepwalk = tegra210_usb3_enable_phy_sleepwalk, + .disable_phy_sleepwalk = tegra210_usb3_disable_phy_sleepwalk, + .enable_phy_wake = tegra210_usb3_enable_phy_wake, + .disable_phy_wake = tegra210_usb3_disable_phy_wake, + .remote_wake_detected = tegra210_usb3_phy_remote_wake_detected, }; static int tegra210_pcie_phy_init(struct phy *phy) @@ -2044,6 +2861,11 @@ static const struct tegra_xusb_lane_ops tegra210_sata_lane_ops = { .remove = tegra210_sata_lane_remove, .iddq_enable = tegra210_uphy_lane_iddq_enable, .iddq_disable = tegra210_uphy_lane_iddq_disable, + .enable_phy_sleepwalk = tegra210_usb3_enable_phy_sleepwalk, + .disable_phy_sleepwalk = tegra210_usb3_disable_phy_sleepwalk, + .enable_phy_wake = tegra210_usb3_enable_phy_wake, + .disable_phy_wake = tegra210_usb3_disable_phy_wake, + .remote_wake_detected = tegra210_usb3_phy_remote_wake_detected, }; static int tegra210_sata_phy_init(struct phy *phy) @@ -2293,6 +3115,8 @@ tegra210_xusb_padctl_probe(struct device *dev, const struct tegra_xusb_padctl_soc *soc) { struct tegra210_xusb_padctl *padctl; + struct platform_device *pdev; + struct device_node *np; int err; padctl = devm_kzalloc(dev, sizeof(*padctl), GFP_KERNEL); @@ -2306,6 +3130,26 @@ tegra210_xusb_padctl_probe(struct device *dev, if (err < 0) return ERR_PTR(err); + np = of_parse_phandle(dev->of_node, "nvidia,pmc", 0); + if (!np) { + dev_warn(dev, "nvidia,pmc property is missing\n"); + goto out; + } + + pdev = of_find_device_by_node(np); + if (!pdev) { + dev_warn(dev, "PMC device is not available\n"); + goto out; + } + + if (!platform_get_drvdata(pdev)) + return ERR_PTR(-EPROBE_DEFER); + + padctl->regmap = dev_get_regmap(&pdev->dev, "usb_sleepwalk"); + if (!padctl->regmap) + dev_info(dev, "failed to find PMC regmap\n"); + +out: return &padctl->base; } @@ -2313,9 +3157,75 @@ static void tegra210_xusb_padctl_remove(struct tegra_xusb_padctl *padctl) { } +static void tegra210_xusb_padctl_save(struct tegra_xusb_padctl *padctl) +{ + struct tegra210_xusb_padctl *priv = to_tegra210_xusb_padctl(padctl); + + priv->context.usb2_pad_mux = + padctl_readl(padctl, XUSB_PADCTL_USB2_PAD_MUX); + priv->context.usb2_port_cap = + padctl_readl(padctl, XUSB_PADCTL_USB2_PORT_CAP); + priv->context.ss_port_map = + padctl_readl(padctl, XUSB_PADCTL_SS_PORT_MAP); + priv->context.usb3_pad_mux = + padctl_readl(padctl, XUSB_PADCTL_USB3_PAD_MUX); +} + +static void tegra210_xusb_padctl_restore(struct tegra_xusb_padctl *padctl) +{ + struct tegra210_xusb_padctl *priv = to_tegra210_xusb_padctl(padctl); + struct tegra_xusb_lane *lane; + + padctl_writel(padctl, priv->context.usb2_pad_mux, + XUSB_PADCTL_USB2_PAD_MUX); + padctl_writel(padctl, priv->context.usb2_port_cap, + XUSB_PADCTL_USB2_PORT_CAP); + padctl_writel(padctl, priv->context.ss_port_map, + XUSB_PADCTL_SS_PORT_MAP); + + list_for_each_entry(lane, &padctl->lanes, list) { + if (lane->pad->ops->iddq_enable) + tegra210_uphy_lane_iddq_enable(lane); + } + + padctl_writel(padctl, priv->context.usb3_pad_mux, + XUSB_PADCTL_USB3_PAD_MUX); + + list_for_each_entry(lane, &padctl->lanes, list) { + if (lane->pad->ops->iddq_disable) + tegra210_uphy_lane_iddq_disable(lane); + } +} + +static int tegra210_xusb_padctl_suspend_noirq(struct tegra_xusb_padctl *padctl) +{ + mutex_lock(&padctl->lock); + + tegra210_uphy_deinit(padctl); + + tegra210_xusb_padctl_save(padctl); + + mutex_unlock(&padctl->lock); + return 0; +} + +static int tegra210_xusb_padctl_resume_noirq(struct tegra_xusb_padctl *padctl) +{ + mutex_lock(&padctl->lock); + + tegra210_xusb_padctl_restore(padctl); + + tegra210_uphy_init(padctl); + + mutex_unlock(&padctl->lock); + return 0; +} + static const struct tegra_xusb_padctl_ops tegra210_xusb_padctl_ops = { .probe = tegra210_xusb_padctl_probe, .remove = tegra210_xusb_padctl_remove, + .suspend_noirq = tegra210_xusb_padctl_suspend_noirq, + .resume_noirq = tegra210_xusb_padctl_resume_noirq, .usb3_set_lfps_detect = tegra210_usb3_set_lfps_detect, .hsic_set_idle = tegra210_hsic_set_idle, .vbus_override = tegra210_xusb_padctl_vbus_override, |