diff options
Diffstat (limited to 'drivers/nvmem')
| -rw-r--r-- | drivers/nvmem/qfprom.c | 21 |
1 files changed, 21 insertions, 0 deletions
diff --git a/drivers/nvmem/qfprom.c b/drivers/nvmem/qfprom.c index 6cace24dfbf7..100d69d8f2e1 100644 --- a/drivers/nvmem/qfprom.c +++ b/drivers/nvmem/qfprom.c @@ -127,6 +127,16 @@ static void qfprom_disable_fuse_blowing(const struct qfprom_priv *priv, { int ret; + /* + * This may be a shared rail and may be able to run at a lower rate + * when we're not blowing fuses. At the moment, the regulator framework + * applies voltage constraints even on disabled rails, so remove our + * constraints and allow the rail to be adjusted by other users. + */ + ret = regulator_set_voltage(priv->vcc, 0, INT_MAX); + if (ret) + dev_warn(priv->dev, "Failed to set 0 voltage (ignoring)\n"); + ret = regulator_disable(priv->vcc); if (ret) dev_warn(priv->dev, "Failed to disable regulator (ignoring)\n"); @@ -172,6 +182,17 @@ static int qfprom_enable_fuse_blowing(const struct qfprom_priv *priv, goto err_clk_prepared; } + /* + * Hardware requires 1.8V min for fuse blowing; this may be + * a rail shared do don't specify a max--regulator constraints + * will handle. + */ + ret = regulator_set_voltage(priv->vcc, 1800000, INT_MAX); + if (ret) { + dev_err(priv->dev, "Failed to set 1.8 voltage\n"); + goto err_clk_rate_set; + } + ret = regulator_enable(priv->vcc); if (ret) { dev_err(priv->dev, "Failed to enable regulator\n"); |