diff options
Diffstat (limited to 'drivers/net/wireless/ath9k/rc.h')
| -rw-r--r-- | drivers/net/wireless/ath9k/rc.h | 316 |
1 files changed, 316 insertions, 0 deletions
diff --git a/drivers/net/wireless/ath9k/rc.h b/drivers/net/wireless/ath9k/rc.h new file mode 100644 index 000000000000..71aef9c75232 --- /dev/null +++ b/drivers/net/wireless/ath9k/rc.h @@ -0,0 +1,316 @@ +/* + * Copyright (c) 2004 Sam Leffler, Errno Consulting + * Copyright (c) 2004 Video54 Technologies, Inc. + * Copyright (c) 2008 Atheros Communications Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#ifndef RC_H +#define RC_H + +#include "ath9k.h" +/* + * Interface definitions for transmit rate control modules for the + * Atheros driver. + * + * A rate control module is responsible for choosing the transmit rate + * for each data frame. Management+control frames are always sent at + * a fixed rate. + * + * Only one module may be present at a time; the driver references + * rate control interfaces by symbol name. If multiple modules are + * to be supported we'll need to switch to a registration-based scheme + * as is currently done, for example, for authentication modules. + * + * An instance of the rate control module is attached to each device + * at attach time and detached when the device is destroyed. The module + * may associate data with each device and each node (station). Both + * sets of storage are opaque except for the size of the per-node storage + * which must be provided when the module is attached. + * + * The rate control module is notified for each state transition and + * station association/reassociation. Otherwise it is queried for a + * rate for each outgoing frame and provided status from each transmitted + * frame. Any ancillary processing is the responsibility of the module + * (e.g. if periodic processing is required then the module should setup + * it's own timer). + * + * In addition to the transmit rate for each frame the module must also + * indicate the number of attempts to make at the specified rate. If this + * number is != ATH_TXMAXTRY then an additional callback is made to setup + * additional transmit state. The rate control code is assumed to write + * this additional data directly to the transmit descriptor. + */ + +struct ath_softc; + +#define TRUE 1 +#define FALSE 0 + +#define ATH_RATE_MAX 30 +#define MCS_SET_SIZE 128 + +enum ieee80211_fixed_rate_mode { + IEEE80211_FIXED_RATE_NONE = 0, + IEEE80211_FIXED_RATE_MCS = 1 /* HT rates */ +}; + +/* + * Use the hal os glue code to get ms time + */ +#define IEEE80211_RATE_IDX_ENTRY(val, idx) (((val&(0xff<<(idx*8)))>>(idx*8))) + +#define SHORT_PRE 1 +#define LONG_PRE 0 + +#define WLAN_PHY_HT_20_SS WLAN_RC_PHY_HT_20_SS +#define WLAN_PHY_HT_20_DS WLAN_RC_PHY_HT_20_DS +#define WLAN_PHY_HT_20_DS_HGI WLAN_RC_PHY_HT_20_DS_HGI +#define WLAN_PHY_HT_40_SS WLAN_RC_PHY_HT_40_SS +#define WLAN_PHY_HT_40_SS_HGI WLAN_RC_PHY_HT_40_SS_HGI +#define WLAN_PHY_HT_40_DS WLAN_RC_PHY_HT_40_DS +#define WLAN_PHY_HT_40_DS_HGI WLAN_RC_PHY_HT_40_DS_HGI + +#define WLAN_PHY_OFDM PHY_OFDM +#define WLAN_PHY_CCK PHY_CCK + +#define TRUE_20 0x2 +#define TRUE_40 0x4 +#define TRUE_2040 (TRUE_20|TRUE_40) +#define TRUE_ALL (TRUE_2040|TRUE) + +enum { + WLAN_RC_PHY_HT_20_SS = 4, + WLAN_RC_PHY_HT_20_DS, + WLAN_RC_PHY_HT_40_SS, + WLAN_RC_PHY_HT_40_DS, + WLAN_RC_PHY_HT_20_SS_HGI, + WLAN_RC_PHY_HT_20_DS_HGI, + WLAN_RC_PHY_HT_40_SS_HGI, + WLAN_RC_PHY_HT_40_DS_HGI, + WLAN_RC_PHY_MAX +}; + +#define WLAN_RC_PHY_DS(_phy) ((_phy == WLAN_RC_PHY_HT_20_DS) \ + || (_phy == WLAN_RC_PHY_HT_40_DS) \ + || (_phy == WLAN_RC_PHY_HT_20_DS_HGI) \ + || (_phy == WLAN_RC_PHY_HT_40_DS_HGI)) +#define WLAN_RC_PHY_40(_phy) ((_phy == WLAN_RC_PHY_HT_40_SS) \ + || (_phy == WLAN_RC_PHY_HT_40_DS) \ + || (_phy == WLAN_RC_PHY_HT_40_SS_HGI) \ + || (_phy == WLAN_RC_PHY_HT_40_DS_HGI)) +#define WLAN_RC_PHY_SGI(_phy) ((_phy == WLAN_RC_PHY_HT_20_SS_HGI) \ + || (_phy == WLAN_RC_PHY_HT_20_DS_HGI) \ + || (_phy == WLAN_RC_PHY_HT_40_SS_HGI) \ + || (_phy == WLAN_RC_PHY_HT_40_DS_HGI)) + +#define WLAN_RC_PHY_HT(_phy) (_phy >= WLAN_RC_PHY_HT_20_SS) + +/* Returns the capflag mode */ +#define WLAN_RC_CAP_MODE(capflag) (((capflag & WLAN_RC_HT_FLAG) ? \ + (capflag & WLAN_RC_40_FLAG) ? TRUE_40 : TRUE_20 : TRUE)) + +/* Return TRUE if flag supports HT20 && client supports HT20 or + * return TRUE if flag supports HT40 && client supports HT40. + * This is used becos some rates overlap between HT20/HT40. + */ + +#define WLAN_RC_PHY_HT_VALID(flag, capflag) (((flag & TRUE_20) && !(capflag \ + & WLAN_RC_40_FLAG)) || ((flag & TRUE_40) && \ + (capflag & WLAN_RC_40_FLAG))) + +#define WLAN_RC_DS_FLAG (0x01) +#define WLAN_RC_40_FLAG (0x02) +#define WLAN_RC_SGI_FLAG (0x04) +#define WLAN_RC_HT_FLAG (0x08) + +/* Index into the rate table */ +#define INIT_RATE_MAX_20 23 +#define INIT_RATE_MAX_40 40 + +#define RATE_TABLE_SIZE 64 + +/* XXX: Convert to kdoc */ +struct ath_rate_table { + int rate_cnt; + struct { + int valid; /* Valid for use in rate control */ + int valid_single_stream;/* Valid for use in rate control + for single stream operation */ + u8 phy; /* CCK/OFDM/TURBO/XR */ + u32 ratekbps; /* Rate in Kbits per second */ + u32 user_ratekbps; /* User rate in KBits per second */ + u8 ratecode; /* rate that goes into + hw descriptors */ + u8 short_preamble; /* Mask for enabling short preamble + in rate code for CCK */ + u8 dot11rate; /* Value that goes into supported + rates info element of MLME */ + u8 ctrl_rate; /* Index of next lower basic rate, + used for duration computation */ + int8_t rssi_ack_validmin; /* Rate control related */ + int8_t rssi_ack_deltamin; /* Rate control related */ + u8 base_index; /* base rate index */ + u8 cw40index; /* 40cap rate index */ + u8 sgi_index; /* shortgi rate index */ + u8 ht_index; /* shortgi rate index */ + u32 max_4ms_framelen; /* Maximum frame length(bytes) + for 4ms tx duration */ + } info[RATE_TABLE_SIZE]; + u32 probe_interval; /* interval for ratectrl to + probe for other rates */ + u32 rssi_reduce_interval; /* interval for ratectrl + to reduce RSSI */ + u8 initial_ratemax; /* the initial ratemax value used + in ath_rc_sib_update() */ +}; + +#define ATH_RC_PROBE_ALLOWED 0x00000001 +#define ATH_RC_MINRATE_LASTRATE 0x00000002 +#define ATH_RC_SHORT_PREAMBLE 0x00000004 + +struct ath_rc_series { + u8 rix; + u8 tries; + u8 flags; + u32 max_4ms_framelen; +}; + +/* rcs_flags definition */ +#define ATH_RC_DS_FLAG 0x01 +#define ATH_RC_CW40_FLAG 0x02 /* CW 40 */ +#define ATH_RC_SGI_FLAG 0x04 /* Short Guard Interval */ +#define ATH_RC_HT_FLAG 0x08 /* HT */ +#define ATH_RC_RTSCTS_FLAG 0x10 /* RTS-CTS */ + +/* + * State structures for new rate adaptation code + */ +#define MAX_TX_RATE_TBL 64 +#define MAX_TX_RATE_PHY 48 + +struct ath_tx_ratectrl_state { + int8_t rssi_thres; /* required rssi for this rate (dB) */ + u8 per; /* recent estimate of packet error rate (%) */ +}; + +struct ath_tx_ratectrl { + struct ath_tx_ratectrl_state state[MAX_TX_RATE_TBL]; /* state */ + int8_t rssi_last; /* last ack rssi */ + int8_t rssi_last_lookup; /* last ack rssi used for lookup */ + int8_t rssi_last_prev; /* previous last ack rssi */ + int8_t rssi_last_prev2; /* 2nd previous last ack rssi */ + int32_t rssi_sum_cnt; /* count of rssi_sum for averaging */ + int32_t rssi_sum_rate; /* rate that we are averaging */ + int32_t rssi_sum; /* running sum of rssi for averaging */ + u32 valid_txrate_mask; /* mask of valid rates */ + u8 rate_table_size; /* rate table size */ + u8 rate_max; /* max rate that has recently worked */ + u8 probe_rate; /* rate we are probing at */ + u32 rssi_time; /* msec timestamp for last ack rssi */ + u32 rssi_down_time; /* msec timestamp for last down step */ + u32 probe_time; /* msec timestamp for last probe */ + u8 hw_maxretry_pktcnt; /* num packets since we got + HW max retry error */ + u8 max_valid_rate; /* maximum number of valid rate */ + u8 valid_rate_index[MAX_TX_RATE_TBL]; /* valid rate index */ + u32 per_down_time; /* msec timstamp for last + PER down step */ + + /* 11n state */ + u8 valid_phy_ratecnt[WLAN_RC_PHY_MAX]; /* valid rate count */ + u8 valid_phy_rateidx[WLAN_RC_PHY_MAX][MAX_TX_RATE_TBL]; + u8 rc_phy_mode; + u8 rate_max_phy; /* Phy index for the max rate */ + u32 rate_max_lastused; /* msec timstamp of when we + last used rateMaxPhy */ + u32 probe_interval; /* interval for ratectrl to probe + for other rates */ +}; + +struct ath_rateset { + u8 rs_nrates; + u8 rs_rates[ATH_RATE_MAX]; +}; + +/* per-device state */ +struct ath_rate_softc { + /* phy tables that contain rate control data */ + const void *hw_rate_table[ATH9K_MODE_MAX]; + int fixedrix; /* -1 or index of fixed rate */ +}; + +/* per-node state */ +struct ath_rate_node { + struct ath_tx_ratectrl tx_ratectrl; /* rate control state proper */ + u32 prev_data_rix; /* rate idx of last data frame */ + + /* map of rate ix -> negotiated rate set ix */ + u8 rixmap[MAX_TX_RATE_TBL]; + + /* map of ht rate ix -> negotiated rate set ix */ + u8 ht_rixmap[MAX_TX_RATE_TBL]; + + u8 ht_cap; /* ht capabilities */ + u8 ant_tx; /* current transmit antenna */ + + u8 single_stream; /* When TRUE, only single + stream Tx possible */ + struct ath_rateset neg_rates; /* Negotiated rates */ + struct ath_rateset neg_ht_rates; /* Negotiated HT rates */ + struct ath_rate_softc *asc; /* back pointer to atheros softc */ + struct ath_vap *avp; /* back pointer to vap */ +}; + +/* Driver data of ieee80211_tx_info */ +struct ath_tx_info_priv { + struct ath_rc_series rcs[4]; + struct ath_tx_status tx; + int n_frames; + int n_bad_frames; + u8 min_rate; +}; + +/* + * Attach/detach a rate control module. + */ +struct ath_rate_softc *ath_rate_attach(struct ath_hal *ah); +void ath_rate_detach(struct ath_rate_softc *asc); + +/* + * Update/reset rate control state for 802.11 state transitions. + * Important mostly as the analog to ath_rate_newassoc when operating + * in station mode. + */ +void ath_rc_node_update(struct ieee80211_hw *hw, struct ath_rate_node *rc_priv); +void ath_rate_newstate(struct ath_softc *sc, struct ath_vap *avp); + +/* + * Return the tx rate series. + */ +void ath_rate_findrate(struct ath_softc *sc, struct ath_rate_node *ath_rc_priv, + int num_tries, int num_rates, + unsigned int rcflag, struct ath_rc_series[], + int *is_probe, int isretry); +/* + * Return rate index for given Dot11 Rate. + */ +u8 ath_rate_findrateix(struct ath_softc *sc, + u8 dot11_rate); + +/* Routines to register/unregister rate control algorithm */ +int ath_rate_control_register(void); +void ath_rate_control_unregister(void); + +#endif /* RC_H */ |