summaryrefslogtreecommitdiff
path: root/drivers/net/phy
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/phy')
-rw-r--r--drivers/net/phy/at803x.c65
-rw-r--r--drivers/net/phy/dp83848.c3
-rw-r--r--drivers/net/phy/fixed_phy.c2
-rw-r--r--drivers/net/phy/micrel.c8
-rw-r--r--drivers/net/phy/phy_device.c18
-rw-r--r--drivers/net/phy/realtek.c20
-rw-r--r--drivers/net/phy/vitesse.c34
7 files changed, 107 insertions, 43 deletions
diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index f279a897a5c7..a52b560e428b 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -42,19 +42,24 @@
#define AT803X_MMD_ACCESS_CONTROL 0x0D
#define AT803X_MMD_ACCESS_CONTROL_DATA 0x0E
#define AT803X_FUNC_DATA 0x4003
+#define AT803X_REG_CHIP_CONFIG 0x1f
+#define AT803X_BT_BX_REG_SEL 0x8000
#define AT803X_DEBUG_ADDR 0x1D
#define AT803X_DEBUG_DATA 0x1E
+#define AT803X_MODE_CFG_MASK 0x0F
+#define AT803X_MODE_CFG_SGMII 0x01
+
+#define AT803X_PSSR 0x11 /*PHY-Specific Status Register*/
+#define AT803X_PSSR_MR_AN_COMPLETE 0x0200
+
#define AT803X_DEBUG_REG_0 0x00
#define AT803X_DEBUG_RX_CLK_DLY_EN BIT(15)
#define AT803X_DEBUG_REG_5 0x05
#define AT803X_DEBUG_TX_CLK_DLY_EN BIT(8)
-#define AT803X_REG_CHIP_CONFIG 0x1f
-#define AT803X_BT_BX_REG_SEL 0x8000
-
#define ATH8030_PHY_ID 0x004dd076
#define ATH8031_PHY_ID 0x004dd074
#define ATH8035_PHY_ID 0x004dd072
@@ -209,7 +214,6 @@ static int at803x_suspend(struct phy_device *phydev)
{
int value;
int wol_enabled;
- int ccr;
mutex_lock(&phydev->lock);
@@ -225,16 +229,6 @@ static int at803x_suspend(struct phy_device *phydev)
phy_write(phydev, MII_BMCR, value);
- if (phydev->interface != PHY_INTERFACE_MODE_SGMII)
- goto done;
-
- /* also power-down SGMII interface */
- ccr = phy_read(phydev, AT803X_REG_CHIP_CONFIG);
- phy_write(phydev, AT803X_REG_CHIP_CONFIG, ccr & ~AT803X_BT_BX_REG_SEL);
- phy_write(phydev, MII_BMCR, phy_read(phydev, MII_BMCR) | BMCR_PDOWN);
- phy_write(phydev, AT803X_REG_CHIP_CONFIG, ccr | AT803X_BT_BX_REG_SEL);
-
-done:
mutex_unlock(&phydev->lock);
return 0;
@@ -243,7 +237,6 @@ done:
static int at803x_resume(struct phy_device *phydev)
{
int value;
- int ccr;
mutex_lock(&phydev->lock);
@@ -251,17 +244,6 @@ static int at803x_resume(struct phy_device *phydev)
value &= ~(BMCR_PDOWN | BMCR_ISOLATE);
phy_write(phydev, MII_BMCR, value);
- if (phydev->interface != PHY_INTERFACE_MODE_SGMII)
- goto done;
-
- /* also power-up SGMII interface */
- ccr = phy_read(phydev, AT803X_REG_CHIP_CONFIG);
- phy_write(phydev, AT803X_REG_CHIP_CONFIG, ccr & ~AT803X_BT_BX_REG_SEL);
- value = phy_read(phydev, MII_BMCR) & ~(BMCR_PDOWN | BMCR_ISOLATE);
- phy_write(phydev, MII_BMCR, value);
- phy_write(phydev, AT803X_REG_CHIP_CONFIG, ccr | AT803X_BT_BX_REG_SEL);
-
-done:
mutex_unlock(&phydev->lock);
return 0;
@@ -381,6 +363,36 @@ static void at803x_link_change_notify(struct phy_device *phydev)
}
}
+static int at803x_aneg_done(struct phy_device *phydev)
+{
+ int ccr;
+
+ int aneg_done = genphy_aneg_done(phydev);
+ if (aneg_done != BMSR_ANEGCOMPLETE)
+ return aneg_done;
+
+ /*
+ * in SGMII mode, if copper side autoneg is successful,
+ * also check SGMII side autoneg result
+ */
+ ccr = phy_read(phydev, AT803X_REG_CHIP_CONFIG);
+ if ((ccr & AT803X_MODE_CFG_MASK) != AT803X_MODE_CFG_SGMII)
+ return aneg_done;
+
+ /* switch to SGMII/fiber page */
+ phy_write(phydev, AT803X_REG_CHIP_CONFIG, ccr & ~AT803X_BT_BX_REG_SEL);
+
+ /* check if the SGMII link is OK. */
+ if (!(phy_read(phydev, AT803X_PSSR) & AT803X_PSSR_MR_AN_COMPLETE)) {
+ pr_warn("803x_aneg_done: SGMII link is not ok\n");
+ aneg_done = 0;
+ }
+ /* switch back to copper page */
+ phy_write(phydev, AT803X_REG_CHIP_CONFIG, ccr | AT803X_BT_BX_REG_SEL);
+
+ return aneg_done;
+}
+
static struct phy_driver at803x_driver[] = {
{
/* ATHEROS 8035 */
@@ -432,6 +444,7 @@ static struct phy_driver at803x_driver[] = {
.flags = PHY_HAS_INTERRUPT,
.config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
+ .aneg_done = at803x_aneg_done,
.ack_interrupt = &at803x_ack_interrupt,
.config_intr = &at803x_config_intr,
} };
diff --git a/drivers/net/phy/dp83848.c b/drivers/net/phy/dp83848.c
index 03d54c4adc88..800b39f06279 100644
--- a/drivers/net/phy/dp83848.c
+++ b/drivers/net/phy/dp83848.c
@@ -19,6 +19,7 @@
#define TI_DP83848C_PHY_ID 0x20005ca0
#define NS_DP83848C_PHY_ID 0x20005c90
#define TLK10X_PHY_ID 0x2000a210
+#define TI_DP83822_PHY_ID 0x2000a240
/* Registers */
#define DP83848_MICR 0x11 /* MII Interrupt Control Register */
@@ -77,6 +78,7 @@ static struct mdio_device_id __maybe_unused dp83848_tbl[] = {
{ TI_DP83848C_PHY_ID, 0xfffffff0 },
{ NS_DP83848C_PHY_ID, 0xfffffff0 },
{ TLK10X_PHY_ID, 0xfffffff0 },
+ { TI_DP83822_PHY_ID, 0xfffffff0 },
{ }
};
MODULE_DEVICE_TABLE(mdio, dp83848_tbl);
@@ -105,6 +107,7 @@ static struct phy_driver dp83848_driver[] = {
DP83848_PHY_DRIVER(TI_DP83848C_PHY_ID, "TI DP83848C 10/100 Mbps PHY"),
DP83848_PHY_DRIVER(NS_DP83848C_PHY_ID, "NS DP83848C 10/100 Mbps PHY"),
DP83848_PHY_DRIVER(TLK10X_PHY_ID, "TI TLK10X 10/100 Mbps PHY"),
+ DP83848_PHY_DRIVER(TI_DP83822_PHY_ID, "TI DP83822 10/100 Mbps PHY"),
};
module_phy_driver(dp83848_driver);
diff --git a/drivers/net/phy/fixed_phy.c b/drivers/net/phy/fixed_phy.c
index c649c101bbab..eb5167210681 100644
--- a/drivers/net/phy/fixed_phy.c
+++ b/drivers/net/phy/fixed_phy.c
@@ -279,7 +279,7 @@ EXPORT_SYMBOL_GPL(fixed_phy_register);
void fixed_phy_unregister(struct phy_device *phy)
{
phy_device_remove(phy);
-
+ of_node_put(phy->mdio.dev.of_node);
fixed_phy_del(phy->mdio.addr);
}
EXPORT_SYMBOL_GPL(fixed_phy_unregister);
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 081df68d2ce1..ea92d524d5a8 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -318,12 +318,12 @@ static int ksz8041_config_init(struct phy_device *phydev)
/* Limit supported and advertised modes in fiber mode */
if (of_property_read_bool(of_node, "micrel,fiber-mode")) {
phydev->dev_flags |= MICREL_PHY_FXEN;
- phydev->supported &= SUPPORTED_FIBRE |
- SUPPORTED_100baseT_Full |
+ phydev->supported &= SUPPORTED_100baseT_Full |
SUPPORTED_100baseT_Half;
- phydev->advertising &= ADVERTISED_FIBRE |
- ADVERTISED_100baseT_Full |
+ phydev->supported |= SUPPORTED_FIBRE;
+ phydev->advertising &= ADVERTISED_100baseT_Full |
ADVERTISED_100baseT_Half;
+ phydev->advertising |= ADVERTISED_FIBRE;
phydev->autoneg = AUTONEG_DISABLE;
}
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index e977ba931878..c4ceb082e970 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -723,6 +723,7 @@ struct phy_device *phy_connect(struct net_device *dev, const char *bus_id,
phydev = to_phy_device(d);
rc = phy_connect_direct(dev, phydev, handler, interface);
+ put_device(d);
if (rc)
return ERR_PTR(rc);
@@ -856,11 +857,17 @@ EXPORT_SYMBOL(phy_attached_print);
int phy_attach_direct(struct net_device *dev, struct phy_device *phydev,
u32 flags, phy_interface_t interface)
{
+ struct module *ndev_owner = dev->dev.parent->driver->owner;
struct mii_bus *bus = phydev->mdio.bus;
struct device *d = &phydev->mdio.dev;
int err;
- if (!try_module_get(bus->owner)) {
+ /* For Ethernet device drivers that register their own MDIO bus, we
+ * will have bus->owner match ndev_mod, so we do not want to increment
+ * our own module->refcnt here, otherwise we would not be able to
+ * unload later on.
+ */
+ if (ndev_owner != bus->owner && !try_module_get(bus->owner)) {
dev_err(&dev->dev, "failed to get the bus module\n");
return -EIO;
}
@@ -920,7 +927,8 @@ int phy_attach_direct(struct net_device *dev, struct phy_device *phydev,
error:
put_device(d);
- module_put(bus->owner);
+ if (ndev_owner != bus->owner)
+ module_put(bus->owner);
return err;
}
EXPORT_SYMBOL(phy_attach_direct);
@@ -953,6 +961,7 @@ struct phy_device *phy_attach(struct net_device *dev, const char *bus_id,
phydev = to_phy_device(d);
rc = phy_attach_direct(dev, phydev, phydev->dev_flags, interface);
+ put_device(d);
if (rc)
return ERR_PTR(rc);
@@ -969,6 +978,8 @@ EXPORT_SYMBOL(phy_attach);
*/
void phy_detach(struct phy_device *phydev)
{
+ struct net_device *dev = phydev->attached_dev;
+ struct module *ndev_owner = dev->dev.parent->driver->owner;
struct mii_bus *bus;
int i;
@@ -996,7 +1007,8 @@ void phy_detach(struct phy_device *phydev)
bus = phydev->mdio.bus;
put_device(&phydev->mdio.dev);
- module_put(bus->owner);
+ if (ndev_owner != bus->owner)
+ module_put(bus->owner);
}
EXPORT_SYMBOL(phy_detach);
diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
index aadd6e9f54ad..9cbe645e3d89 100644
--- a/drivers/net/phy/realtek.c
+++ b/drivers/net/phy/realtek.c
@@ -102,15 +102,19 @@ static int rtl8211f_config_init(struct phy_device *phydev)
if (ret < 0)
return ret;
- if (phydev->interface == PHY_INTERFACE_MODE_RGMII) {
- /* enable TXDLY */
- phy_write(phydev, RTL8211F_PAGE_SELECT, 0xd08);
- reg = phy_read(phydev, 0x11);
+ phy_write(phydev, RTL8211F_PAGE_SELECT, 0xd08);
+ reg = phy_read(phydev, 0x11);
+
+ /* enable TX-delay for rgmii-id and rgmii-txid, otherwise disable it */
+ if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
+ phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
reg |= RTL8211F_TX_DELAY;
- phy_write(phydev, 0x11, reg);
- /* restore to default page 0 */
- phy_write(phydev, RTL8211F_PAGE_SELECT, 0x0);
- }
+ else
+ reg &= ~RTL8211F_TX_DELAY;
+
+ phy_write(phydev, 0x11, reg);
+ /* restore to default page 0 */
+ phy_write(phydev, RTL8211F_PAGE_SELECT, 0x0);
return 0;
}
diff --git a/drivers/net/phy/vitesse.c b/drivers/net/phy/vitesse.c
index 2e37eb337d48..24b4a09468dd 100644
--- a/drivers/net/phy/vitesse.c
+++ b/drivers/net/phy/vitesse.c
@@ -62,6 +62,10 @@
/* Vitesse Extended Page Access Register */
#define MII_VSC82X4_EXT_PAGE_ACCESS 0x1f
+/* Vitesse VSC8601 Extended PHY Control Register 1 */
+#define MII_VSC8601_EPHY_CTL 0x17
+#define MII_VSC8601_EPHY_CTL_RGMII_SKEW (1 << 8)
+
#define PHY_ID_VSC8234 0x000fc620
#define PHY_ID_VSC8244 0x000fc6c0
#define PHY_ID_VSC8514 0x00070670
@@ -111,6 +115,34 @@ static int vsc824x_config_init(struct phy_device *phydev)
return err;
}
+/* This adds a skew for both TX and RX clocks, so the skew should only be
+ * applied to "rgmii-id" interfaces. It may not work as expected
+ * on "rgmii-txid", "rgmii-rxid" or "rgmii" interfaces. */
+static int vsc8601_add_skew(struct phy_device *phydev)
+{
+ int ret;
+
+ ret = phy_read(phydev, MII_VSC8601_EPHY_CTL);
+ if (ret < 0)
+ return ret;
+
+ ret |= MII_VSC8601_EPHY_CTL_RGMII_SKEW;
+ return phy_write(phydev, MII_VSC8601_EPHY_CTL, ret);
+}
+
+static int vsc8601_config_init(struct phy_device *phydev)
+{
+ int ret = 0;
+
+ if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
+ ret = vsc8601_add_skew(phydev);
+
+ if (ret < 0)
+ return ret;
+
+ return genphy_config_init(phydev);
+}
+
static int vsc824x_ack_interrupt(struct phy_device *phydev)
{
int err = 0;
@@ -275,7 +307,7 @@ static struct phy_driver vsc82xx_driver[] = {
.phy_id_mask = 0x000ffff0,
.features = PHY_GBIT_FEATURES,
.flags = PHY_HAS_INTERRUPT,
- .config_init = &genphy_config_init,
+ .config_init = &vsc8601_config_init,
.config_aneg = &genphy_config_aneg,
.read_status = &genphy_read_status,
.ack_interrupt = &vsc824x_ack_interrupt,
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-11 00:38:19 +0000