summaryrefslogtreecommitdiff
path: root/drivers/net/phy
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/phy')
-rw-r--r--drivers/net/phy/Kconfig6
-rw-r--r--drivers/net/phy/Makefile1
-rw-r--r--drivers/net/phy/bcm7xxx.c343
-rw-r--r--drivers/net/phy/broadcom.c52
-rw-r--r--drivers/net/phy/dp83640.c93
-rw-r--r--drivers/net/phy/mdio_bus.c20
-rw-r--r--drivers/net/phy/micrel.c49
-rw-r--r--drivers/net/phy/phy.c51
-rw-r--r--drivers/net/phy/phy_device.c57
9 files changed, 583 insertions, 89 deletions
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 9b5d46c03eed..6a17f92153b3 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -71,6 +71,12 @@ config BCM63XX_PHY
---help---
Currently supports the 6348 and 6358 PHYs.
+config BCM7XXX_PHY
+ tristate "Drivers for Broadcom 7xxx SOCs internal PHYs"
+ ---help---
+ Currently supports the BCM7366, BCM7439, BCM7445, and
+ 40nm and 65nm generation of BCM7xxx Set Top Box SoCs.
+
config BCM87XX_PHY
tristate "Driver for Broadcom BCM8706 and BCM8727 PHYs"
help
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index 9013dfa12aa3..07d24024863e 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_SMSC_PHY) += smsc.o
obj-$(CONFIG_VITESSE_PHY) += vitesse.o
obj-$(CONFIG_BROADCOM_PHY) += broadcom.o
obj-$(CONFIG_BCM63XX_PHY) += bcm63xx.o
+obj-$(CONFIG_BCM7XXX_PHY) += bcm7xxx.o
obj-$(CONFIG_BCM87XX_PHY) += bcm87xx.o
obj-$(CONFIG_ICPLUS_PHY) += icplus.o
obj-$(CONFIG_REALTEK_PHY) += realtek.o
diff --git a/drivers/net/phy/bcm7xxx.c b/drivers/net/phy/bcm7xxx.c
new file mode 100644
index 000000000000..697337220016
--- /dev/null
+++ b/drivers/net/phy/bcm7xxx.c
@@ -0,0 +1,343 @@
+/*
+ * Broadcom BCM7xxx internal transceivers support.
+ *
+ * Copyright (C) 2014, Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/phy.h>
+#include <linux/delay.h>
+#include <linux/bitops.h>
+#include <linux/brcmphy.h>
+
+/* Broadcom BCM7xxx internal PHY registers */
+#define MII_BCM7XXX_CHANNEL_WIDTH 0x2000
+
+/* 40nm only register definitions */
+#define MII_BCM7XXX_100TX_AUX_CTL 0x10
+#define MII_BCM7XXX_100TX_FALSE_CAR 0x13
+#define MII_BCM7XXX_100TX_DISC 0x14
+#define MII_BCM7XXX_AUX_MODE 0x1d
+#define MII_BCM7XX_64CLK_MDIO BIT(12)
+#define MII_BCM7XXX_CORE_BASE1E 0x1e
+#define MII_BCM7XXX_TEST 0x1f
+#define MII_BCM7XXX_SHD_MODE_2 BIT(2)
+
+static int bcm7445_config_init(struct phy_device *phydev)
+{
+ int ret;
+ const struct bcm7445_regs {
+ int reg;
+ u16 value;
+ } bcm7445_regs_cfg[] = {
+ /* increases ADC latency by 24ns */
+ { MII_BCM54XX_EXP_SEL, 0x0038 },
+ { MII_BCM54XX_EXP_DATA, 0xAB95 },
+ /* increases internal 1V LDO voltage by 5% */
+ { MII_BCM54XX_EXP_SEL, 0x2038 },
+ { MII_BCM54XX_EXP_DATA, 0xBB22 },
+ /* reduce RX low pass filter corner frequency */
+ { MII_BCM54XX_EXP_SEL, 0x6038 },
+ { MII_BCM54XX_EXP_DATA, 0xFFC5 },
+ /* reduce RX high pass filter corner frequency */
+ { MII_BCM54XX_EXP_SEL, 0x003a },
+ { MII_BCM54XX_EXP_DATA, 0x2002 },
+ };
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(bcm7445_regs_cfg); i++) {
+ ret = phy_write(phydev,
+ bcm7445_regs_cfg[i].reg,
+ bcm7445_regs_cfg[i].value);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static void phy_write_exp(struct phy_device *phydev,
+ u16 reg, u16 value)
+{
+ phy_write(phydev, MII_BCM54XX_EXP_SEL, MII_BCM54XX_EXP_SEL_ER | reg);
+ phy_write(phydev, MII_BCM54XX_EXP_DATA, value);
+}
+
+static void phy_write_misc(struct phy_device *phydev,
+ u16 reg, u16 chl, u16 value)
+{
+ int tmp;
+
+ phy_write(phydev, MII_BCM54XX_AUX_CTL, MII_BCM54XX_AUXCTL_SHDWSEL_MISC);
+
+ tmp = phy_read(phydev, MII_BCM54XX_AUX_CTL);
+ tmp |= MII_BCM54XX_AUXCTL_ACTL_SMDSP_ENA;
+ phy_write(phydev, MII_BCM54XX_AUX_CTL, tmp);
+
+ tmp = (chl * MII_BCM7XXX_CHANNEL_WIDTH) | reg;
+ phy_write(phydev, MII_BCM54XX_EXP_SEL, tmp);
+
+ phy_write(phydev, MII_BCM54XX_EXP_DATA, value);
+}
+
+static int bcm7xxx_28nm_afe_config_init(struct phy_device *phydev)
+{
+ /* write AFE_RXCONFIG_0 */
+ phy_write_misc(phydev, 0x38, 0x0000, 0xeb19);
+
+ /* write AFE_RXCONFIG_1 */
+ phy_write_misc(phydev, 0x38, 0x0001, 0x9a3f);
+
+ /* write AFE_RX_LP_COUNTER */
+ phy_write_misc(phydev, 0x38, 0x0003, 0x7fc7);
+
+ /* write AFE_HPF_TRIM_OTHERS */
+ phy_write_misc(phydev, 0x3A, 0x0000, 0x000b);
+
+ /* write AFTE_TX_CONFIG */
+ phy_write_misc(phydev, 0x39, 0x0000, 0x0800);
+
+ /* Increase VCO range to prevent unlocking problem of PLL at low
+ * temp
+ */
+ phy_write_misc(phydev, 0x0032, 0x0001, 0x0048);
+
+ /* Change Ki to 011 */
+ phy_write_misc(phydev, 0x0032, 0x0002, 0x021b);
+
+ /* Disable loading of TVCO buffer to bandgap, set bandgap trim
+ * to 111
+ */
+ phy_write_misc(phydev, 0x0033, 0x0000, 0x0e20);
+
+ /* Adjust bias current trim by -3 */
+ phy_write_misc(phydev, 0x000a, 0x0000, 0x690b);
+
+ /* Switch to CORE_BASE1E */
+ phy_write(phydev, MII_BCM7XXX_CORE_BASE1E, 0xd);
+
+ /* Reset R_CAL/RC_CAL Engine */
+ phy_write_exp(phydev, 0x00b0, 0x0010);
+
+ /* Disable Reset R_CAL/RC_CAL Engine */
+ phy_write_exp(phydev, 0x00b0, 0x0000);
+
+ return 0;
+}
+
+static int bcm7xxx_28nm_config_init(struct phy_device *phydev)
+{
+ int ret;
+
+ ret = bcm7445_config_init(phydev);
+ if (ret)
+ return ret;
+
+ return bcm7xxx_28nm_afe_config_init(phydev);
+}
+
+static int phy_set_clr_bits(struct phy_device *dev, int location,
+ int set_mask, int clr_mask)
+{
+ int v, ret;
+
+ v = phy_read(dev, location);
+ if (v < 0)
+ return v;
+
+ v &= ~clr_mask;
+ v |= set_mask;
+
+ ret = phy_write(dev, location, v);
+ if (ret < 0)
+ return ret;
+
+ return v;
+}
+
+static int bcm7xxx_config_init(struct phy_device *phydev)
+{
+ int ret;
+
+ /* Enable 64 clock MDIO */
+ phy_write(phydev, MII_BCM7XXX_AUX_MODE, MII_BCM7XX_64CLK_MDIO);
+ phy_read(phydev, MII_BCM7XXX_AUX_MODE);
+
+ /* Workaround only required for 100Mbits/sec */
+ if (!(phydev->dev_flags & PHY_BRCM_100MBPS_WAR))
+ return 0;
+
+ /* set shadow mode 2 */
+ ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST,
+ MII_BCM7XXX_SHD_MODE_2, MII_BCM7XXX_SHD_MODE_2);
+ if (ret < 0)
+ return ret;
+
+ /* set iddq_clkbias */
+ phy_write(phydev, MII_BCM7XXX_100TX_DISC, 0x0F00);
+ udelay(10);
+
+ /* reset iddq_clkbias */
+ phy_write(phydev, MII_BCM7XXX_100TX_DISC, 0x0C00);
+
+ phy_write(phydev, MII_BCM7XXX_100TX_FALSE_CAR, 0x7555);
+
+ /* reset shadow mode 2 */
+ ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST, MII_BCM7XXX_SHD_MODE_2, 0);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+/* Workaround for putting the PHY in IDDQ mode, required
+ * for all BCM7XXX PHYs
+ */
+static int bcm7xxx_suspend(struct phy_device *phydev)
+{
+ int ret;
+ const struct bcm7xxx_regs {
+ int reg;
+ u16 value;
+ } bcm7xxx_suspend_cfg[] = {
+ { MII_BCM7XXX_TEST, 0x008b },
+ { MII_BCM7XXX_100TX_AUX_CTL, 0x01c0 },
+ { MII_BCM7XXX_100TX_DISC, 0x7000 },
+ { MII_BCM7XXX_TEST, 0x000f },
+ { MII_BCM7XXX_100TX_AUX_CTL, 0x20d0 },
+ { MII_BCM7XXX_TEST, 0x000b },
+ };
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(bcm7xxx_suspend_cfg); i++) {
+ ret = phy_write(phydev,
+ bcm7xxx_suspend_cfg[i].reg,
+ bcm7xxx_suspend_cfg[i].value);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int bcm7xxx_dummy_config_init(struct phy_device *phydev)
+{
+ return 0;
+}
+
+static struct phy_driver bcm7xxx_driver[] = {
+{
+ .phy_id = PHY_ID_BCM7366,
+ .phy_id_mask = 0xfffffff0,
+ .name = "Broadcom BCM7366",
+ .features = PHY_GBIT_FEATURES |
+ SUPPORTED_Pause | SUPPORTED_Asym_Pause,
+ .flags = PHY_IS_INTERNAL,
+ .config_init = bcm7xxx_28nm_afe_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .suspend = bcm7xxx_suspend,
+ .resume = bcm7xxx_28nm_afe_config_init,
+ .driver = { .owner = THIS_MODULE },
+}, {
+ .phy_id = PHY_ID_BCM7439,
+ .phy_id_mask = 0xfffffff0,
+ .name = "Broadcom BCM7439",
+ .features = PHY_GBIT_FEATURES |
+ SUPPORTED_Pause | SUPPORTED_Asym_Pause,
+ .flags = PHY_IS_INTERNAL,
+ .config_init = bcm7xxx_28nm_afe_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .suspend = bcm7xxx_suspend,
+ .resume = bcm7xxx_28nm_afe_config_init,
+ .driver = { .owner = THIS_MODULE },
+}, {
+ .phy_id = PHY_ID_BCM7445,
+ .phy_id_mask = 0xfffffff0,
+ .name = "Broadcom BCM7445",
+ .features = PHY_GBIT_FEATURES |
+ SUPPORTED_Pause | SUPPORTED_Asym_Pause,
+ .flags = PHY_IS_INTERNAL,
+ .config_init = bcm7xxx_28nm_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .suspend = bcm7xxx_suspend,
+ .resume = bcm7xxx_28nm_config_init,
+ .driver = { .owner = THIS_MODULE },
+}, {
+ .name = "Broadcom BCM7XXX 28nm",
+ .phy_id = PHY_ID_BCM7XXX_28,
+ .phy_id_mask = PHY_BCM_OUI_MASK,
+ .features = PHY_GBIT_FEATURES |
+ SUPPORTED_Pause | SUPPORTED_Asym_Pause,
+ .flags = PHY_IS_INTERNAL,
+ .config_init = bcm7xxx_28nm_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .suspend = bcm7xxx_suspend,
+ .resume = bcm7xxx_28nm_config_init,
+ .driver = { .owner = THIS_MODULE },
+}, {
+ .phy_id = PHY_BCM_OUI_4,
+ .phy_id_mask = 0xffff0000,
+ .name = "Broadcom BCM7XXX 40nm",
+ .features = PHY_GBIT_FEATURES |
+ SUPPORTED_Pause | SUPPORTED_Asym_Pause,
+ .flags = PHY_IS_INTERNAL,
+ .config_init = bcm7xxx_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .suspend = bcm7xxx_suspend,
+ .resume = bcm7xxx_config_init,
+ .driver = { .owner = THIS_MODULE },
+}, {
+ .phy_id = PHY_BCM_OUI_5,
+ .phy_id_mask = 0xffffff00,
+ .name = "Broadcom BCM7XXX 65nm",
+ .features = PHY_BASIC_FEATURES |
+ SUPPORTED_Pause | SUPPORTED_Asym_Pause,
+ .flags = PHY_IS_INTERNAL,
+ .config_init = bcm7xxx_dummy_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .suspend = bcm7xxx_suspend,
+ .resume = bcm7xxx_config_init,
+ .driver = { .owner = THIS_MODULE },
+} };
+
+static struct mdio_device_id __maybe_unused bcm7xxx_tbl[] = {
+ { PHY_ID_BCM7366, 0xfffffff0, },
+ { PHY_ID_BCM7439, 0xfffffff0, },
+ { PHY_ID_BCM7445, 0xfffffff0, },
+ { PHY_ID_BCM7XXX_28, 0xfffffc00 },
+ { PHY_BCM_OUI_4, 0xffff0000 },
+ { PHY_BCM_OUI_5, 0xffffff00 },
+ { }
+};
+
+static int __init bcm7xxx_phy_init(void)
+{
+ return phy_drivers_register(bcm7xxx_driver,
+ ARRAY_SIZE(bcm7xxx_driver));
+}
+
+static void __exit bcm7xxx_phy_exit(void)
+{
+ phy_drivers_unregister(bcm7xxx_driver,
+ ARRAY_SIZE(bcm7xxx_driver));
+}
+
+module_init(bcm7xxx_phy_init);
+module_exit(bcm7xxx_phy_exit);
+
+MODULE_DEVICE_TABLE(mdio, bcm7xxx_tbl);
+
+MODULE_DESCRIPTION("Broadcom BCM7xxx internal PHY driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Broadcom Corporation");
diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
index f8c90ea75108..34088d60da74 100644
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -25,58 +25,6 @@
#define BRCM_PHY_REV(phydev) \
((phydev)->drv->phy_id & ~((phydev)->drv->phy_id_mask))
-
-#define MII_BCM54XX_ECR 0x10 /* BCM54xx extended control register */
-#define MII_BCM54XX_ECR_IM 0x1000 /* Interrupt mask */
-#define MII_BCM54XX_ECR_IF 0x0800 /* Interrupt force */
-
-#define MII_BCM54XX_ESR 0x11 /* BCM54xx extended status register */
-#define MII_BCM54XX_ESR_IS 0x1000 /* Interrupt status */
-
-#define MII_BCM54XX_EXP_DATA 0x15 /* Expansion register data */
-#define MII_BCM54XX_EXP_SEL 0x17 /* Expansion register select */
-#define MII_BCM54XX_EXP_SEL_SSD 0x0e00 /* Secondary SerDes select */
-#define MII_BCM54XX_EXP_SEL_ER 0x0f00 /* Expansion register select */
-
-#define MII_BCM54XX_AUX_CTL 0x18 /* Auxiliary control register */
-#define MII_BCM54XX_ISR 0x1a /* BCM54xx interrupt status register */
-#define MII_BCM54XX_IMR 0x1b /* BCM54xx interrupt mask register */
-#define MII_BCM54XX_INT_CRCERR 0x0001 /* CRC error */
-#define MII_BCM54XX_INT_LINK 0x0002 /* Link status changed */
-#define MII_BCM54XX_INT_SPEED 0x0004 /* Link speed change */
-#define MII_BCM54XX_INT_DUPLEX 0x0008 /* Duplex mode changed */
-#define MII_BCM54XX_INT_LRS 0x0010 /* Local receiver status changed */
-#define MII_BCM54XX_INT_RRS 0x0020 /* Remote receiver status changed */
-#define MII_BCM54XX_INT_SSERR 0x0040 /* Scrambler synchronization error */
-#define MII_BCM54XX_INT_UHCD 0x0080 /* Unsupported HCD negotiated */
-#define MII_BCM54XX_INT_NHCD 0x0100 /* No HCD */
-#define MII_BCM54XX_INT_NHCDL 0x0200 /* No HCD link */
-#define MII_BCM54XX_INT_ANPR 0x0400 /* Auto-negotiation page received */
-#define MII_BCM54XX_INT_LC 0x0800 /* All counters below 128 */
-#define MII_BCM54XX_INT_HC 0x1000 /* Counter above 32768 */
-#define MII_BCM54XX_INT_MDIX 0x2000 /* MDIX status change */
-#define MII_BCM54XX_INT_PSERR 0x4000 /* Pair swap error */
-
-#define MII_BCM54XX_SHD 0x1c /* 0x1c shadow registers */
-#define MII_BCM54XX_SHD_WRITE 0x8000
-#define MII_BCM54XX_SHD_VAL(x) ((x & 0x1f) << 10)
-#define MII_BCM54XX_SHD_DATA(x) ((x & 0x3ff) << 0)
-
-/*
- * AUXILIARY CONTROL SHADOW ACCESS REGISTERS. (PHY REG 0x18)
- */
-#define MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL 0x0000
-#define MII_BCM54XX_AUXCTL_ACTL_TX_6DB 0x0400
-#define MII_BCM54XX_AUXCTL_ACTL_SMDSP_ENA 0x0800
-
-#define MII_BCM54XX_AUXCTL_MISC_WREN 0x8000
-#define MII_BCM54XX_AUXCTL_MISC_FORCE_AMDIX 0x0200
-#define MII_BCM54XX_AUXCTL_MISC_RDSEL_MISC 0x7000
-#define MII_BCM54XX_AUXCTL_SHDWSEL_MISC 0x0007
-
-#define MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL 0x0000
-
-
/*
* Broadcom LED source encodings. These are used in BCM5461, BCM5481,
* BCM5482, and possibly some others.
diff --git a/drivers/net/phy/dp83640.c b/drivers/net/phy/dp83640.c
index 98e7cbf720a5..352c5e45fe9c 100644
--- a/drivers/net/phy/dp83640.c
+++ b/drivers/net/phy/dp83640.c
@@ -47,6 +47,7 @@
#define CAL_EVENT 7
#define CAL_TRIGGER 7
#define PER_TRIGGER 6
+#define DP83640_N_PINS 12
#define MII_DP83640_MICR 0x11
#define MII_DP83640_MISR 0x12
@@ -173,6 +174,37 @@ MODULE_PARM_DESC(chosen_phy, \
MODULE_PARM_DESC(gpio_tab, \
"Which GPIO line to use for which purpose: cal,perout,extts1,...,extts6");
+static void dp83640_gpio_defaults(struct ptp_pin_desc *pd)
+{
+ int i, index;
+
+ for (i = 0; i < DP83640_N_PINS; i++) {
+ snprintf(pd[i].name, sizeof(pd[i].name), "GPIO%d", 1 + i);
+ pd[i].index = i;
+ }
+
+ for (i = 0; i < GPIO_TABLE_SIZE; i++) {
+ if (gpio_tab[i] < 1 || gpio_tab[i] > DP83640_N_PINS) {
+ pr_err("gpio_tab[%d]=%hu out of range", i, gpio_tab[i]);
+ return;
+ }
+ }
+
+ index = gpio_tab[CALIBRATE_GPIO] - 1;
+ pd[index].func = PTP_PF_PHYSYNC;
+ pd[index].chan = 0;
+
+ index = gpio_tab[PEROUT_GPIO] - 1;
+ pd[index].func = PTP_PF_PEROUT;
+ pd[index].chan = 0;
+
+ for (i = EXTTS0_GPIO; i < GPIO_TABLE_SIZE; i++) {
+ index = gpio_tab[i] - 1;
+ pd[index].func = PTP_PF_EXTTS;
+ pd[index].chan = i - EXTTS0_GPIO;
+ }
+}
+
/* a list of clocks and a mutex to protect it */
static LIST_HEAD(phyter_clocks);
static DEFINE_MUTEX(phyter_clocks_lock);
@@ -266,15 +298,22 @@ static u64 phy2txts(struct phy_txts *p)
return ns;
}
-static void periodic_output(struct dp83640_clock *clock,
- struct ptp_clock_request *clkreq, bool on)
+static int periodic_output(struct dp83640_clock *clock,
+ struct ptp_clock_request *clkreq, bool on)
{
struct dp83640_private *dp83640 = clock->chosen;
struct phy_device *phydev = dp83640->phydev;
- u32 sec, nsec, period;
+ u32 sec, nsec, pwidth;
u16 gpio, ptp_trig, trigger, val;
- gpio = on ? gpio_tab[PEROUT_GPIO] : 0;
+ if (on) {
+ gpio = 1 + ptp_find_pin(clock->ptp_clock, PTP_PF_PEROUT, 0);
+ if (gpio < 1)
+ return -EINVAL;
+ } else {
+ gpio = 0;
+ }
+
trigger = PER_TRIGGER;
ptp_trig = TRIG_WR |
@@ -291,13 +330,14 @@ static void periodic_output(struct dp83640_clock *clock,
ext_write(0, phydev, PAGE5, PTP_TRIG, ptp_trig);
ext_write(0, phydev, PAGE4, PTP_CTL, val);
mutex_unlock(&clock->extreg_lock);
- return;
+ return 0;
}
sec = clkreq->perout.start.sec;
nsec = clkreq->perout.start.nsec;
- period = clkreq->perout.period.sec * 1000000000UL;
- period += clkreq->perout.period.nsec;
+ pwidth = clkreq->perout.period.sec * 1000000000UL;
+ pwidth += clkreq->perout.period.nsec;
+ pwidth /= 2;
mutex_lock(&clock->extreg_lock);
@@ -310,8 +350,8 @@ static void periodic_output(struct dp83640_clock *clock,
ext_write(0, phydev, PAGE4, PTP_TDR, nsec >> 16); /* ns[31:16] */
ext_write(0, phydev, PAGE4, PTP_TDR, sec & 0xffff); /* sec[15:0] */
ext_write(0, phydev, PAGE4, PTP_TDR, sec >> 16); /* sec[31:16] */
- ext_write(0, phydev, PAGE4, PTP_TDR, period & 0xffff); /* ns[15:0] */
- ext_write(0, phydev, PAGE4, PTP_TDR, period >> 16); /* ns[31:16] */
+ ext_write(0, phydev, PAGE4, PTP_TDR, pwidth & 0xffff); /* ns[15:0] */
+ ext_write(0, phydev, PAGE4, PTP_TDR, pwidth >> 16); /* ns[31:16] */
/*enable trigger*/
val &= ~TRIG_LOAD;
@@ -319,6 +359,7 @@ static void periodic_output(struct dp83640_clock *clock,
ext_write(0, phydev, PAGE4, PTP_CTL, val);
mutex_unlock(&clock->extreg_lock);
+ return 0;
}
/* ptp clock methods */
@@ -424,18 +465,21 @@ static int ptp_dp83640_enable(struct ptp_clock_info *ptp,
struct dp83640_clock *clock =
container_of(ptp, struct dp83640_clock, caps);
struct phy_device *phydev = clock->chosen->phydev;
- int index;
+ unsigned int index;
u16 evnt, event_num, gpio_num;
switch (rq->type) {
case PTP_CLK_REQ_EXTTS:
index = rq->extts.index;
- if (index < 0 || index >= N_EXT_TS)
+ if (index >= N_EXT_TS)
return -EINVAL;
event_num = EXT_EVENT + index;
evnt = EVNT_WR | (event_num & EVNT_SEL_MASK) << EVNT_SEL_SHIFT;
if (on) {
- gpio_num = gpio_tab[EXTTS0_GPIO + index];
+ gpio_num = 1 + ptp_find_pin(clock->ptp_clock,
+ PTP_PF_EXTTS, index);
+ if (gpio_num < 1)
+ return -EINVAL;
evnt |= (gpio_num & EVNT_GPIO_MASK) << EVNT_GPIO_SHIFT;
if (rq->extts.flags & PTP_FALLING_EDGE)
evnt |= EVNT_FALL;
@@ -448,8 +492,7 @@ static int ptp_dp83640_enable(struct ptp_clock_info *ptp,
case PTP_CLK_REQ_PEROUT:
if (rq->perout.index != 0)
return -EINVAL;
- periodic_output(clock, rq, on);
- return 0;
+ return periodic_output(clock, rq, on);
default:
break;
@@ -458,6 +501,12 @@ static int ptp_dp83640_enable(struct ptp_clock_info *ptp,
return -EOPNOTSUPP;
}
+static int ptp_dp83640_verify(struct ptp_clock_info *ptp, unsigned int pin,
+ enum ptp_pin_function func, unsigned int chan)
+{
+ return 0;
+}
+
static u8 status_frame_dst[6] = { 0x01, 0x1B, 0x19, 0x00, 0x00, 0x00 };
static u8 status_frame_src[6] = { 0x08, 0x00, 0x17, 0x0B, 0x6B, 0x0F };
@@ -875,6 +924,7 @@ static void dp83640_free_clocks(void)
mutex_destroy(&clock->extreg_lock);
mutex_destroy(&clock->clock_lock);
put_device(&clock->bus->dev);
+ kfree(clock->caps.pin_config);
kfree(clock);
}
@@ -894,12 +944,18 @@ static void dp83640_clock_init(struct dp83640_clock *clock, struct mii_bus *bus)
clock->caps.n_alarm = 0;
clock->caps.n_ext_ts = N_EXT_TS;
clock->caps.n_per_out = 1;
+ clock->caps.n_pins = DP83640_N_PINS;
clock->caps.pps = 0;
clock->caps.adjfreq = ptp_dp83640_adjfreq;
clock->caps.adjtime = ptp_dp83640_adjtime;
clock->caps.gettime = ptp_dp83640_gettime;
clock->caps.settime = ptp_dp83640_settime;
clock->caps.enable = ptp_dp83640_enable;
+ clock->caps.verify = ptp_dp83640_verify;
+ /*
+ * Convert the module param defaults into a dynamic pin configuration.
+ */
+ dp83640_gpio_defaults(clock->caps.pin_config);
/*
* Get a reference to this bus instance.
*/
@@ -950,6 +1006,13 @@ static struct dp83640_clock *dp83640_clock_get_bus(struct mii_bus *bus)
if (!clock)
goto out;
+ clock->caps.pin_config = kzalloc(sizeof(struct ptp_pin_desc) *
+ DP83640_N_PINS, GFP_KERNEL);
+ if (!clock->caps.pin_config) {
+ kfree(clock);
+ clock = NULL;
+ goto out;
+ }
dp83640_clock_init(clock, bus);
list_add_tail(&phyter_clocks, &clock->list);
out:
@@ -1363,7 +1426,7 @@ static void __exit dp83640_exit(void)
}
MODULE_DESCRIPTION("National Semiconductor DP83640 PHY driver");
-MODULE_AUTHOR("Richard Cochran <richardcochran@gmail.at>");
+MODULE_AUTHOR("Richard Cochran <richardcochran@gmail.com>");
MODULE_LICENSE("GPL");
module_init(dp83640_init);
diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index 71e49000fbf3..76f54b32a120 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -432,8 +432,28 @@ phy_id_show(struct device *dev, struct device_attribute *attr, char *buf)
}
static DEVICE_ATTR_RO(phy_id);
+static ssize_t
+phy_interface_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct phy_device *phydev = to_phy_device(dev);
+
+ return sprintf(buf, "%s\n", phy_modes(phydev->interface));
+}
+static DEVICE_ATTR_RO(phy_interface);
+
+static ssize_t
+phy_has_fixups_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct phy_device *phydev = to_phy_device(dev);
+
+ return sprintf(buf, "%d\n", phydev->has_fixups);
+}
+static DEVICE_ATTR_RO(phy_has_fixups);
+
static struct attribute *mdio_dev_attrs[] = {
&dev_attr_phy_id.attr,
+ &dev_attr_phy_interface.attr,
+ &dev_attr_phy_has_fixups.attr,
NULL,
};
ATTRIBUTE_GROUPS(mdio_dev);
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 5a8993b0cafc..5ad971a55c5d 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -148,15 +148,52 @@ static int ks8737_config_intr(struct phy_device *phydev)
return rc < 0 ? rc : 0;
}
+static int kszphy_setup_led(struct phy_device *phydev,
+ unsigned int reg, unsigned int shift)
+{
+
+ struct device *dev = &phydev->dev;
+ struct device_node *of_node = dev->of_node;
+ int rc, temp;
+ u32 val;
+
+ if (!of_node && dev->parent->of_node)
+ of_node = dev->parent->of_node;
+
+ if (of_property_read_u32(of_node, "micrel,led-mode", &val))
+ return 0;
+
+ temp = phy_read(phydev, reg);
+ if (temp < 0)
+ return temp;
+
+ temp &= ~(3 << shift);
+ temp |= val << shift;
+ rc = phy_write(phydev, reg, temp);
+
+ return rc < 0 ? rc : 0;
+}
+
static int kszphy_config_init(struct phy_device *phydev)
{
return 0;
}
+static int kszphy_config_init_led8041(struct phy_device *phydev)
+{
+ /* single led control, register 0x1e bits 15..14 */
+ return kszphy_setup_led(phydev, 0x1e, 14);
+}
+
static int ksz8021_config_init(struct phy_device *phydev)
{
- int rc;
const u16 val = KSZPHY_OMSO_B_CAST_OFF | KSZPHY_OMSO_RMII_OVERRIDE;
+ int rc;
+
+ rc = kszphy_setup_led(phydev, 0x1f, 4);
+ if (rc)
+ dev_err(&phydev->dev, "failed to set led mode\n");
+
phy_write(phydev, MII_KSZPHY_OMSO, val);
rc = ksz_config_flags(phydev);
return rc < 0 ? rc : 0;
@@ -166,6 +203,10 @@ static int ks8051_config_init(struct phy_device *phydev)
{
int rc;
+ rc = kszphy_setup_led(phydev, 0x1f, 4);
+ if (rc)
+ dev_err(&phydev->dev, "failed to set led mode\n");
+
rc = ksz_config_flags(phydev);
return rc < 0 ? rc : 0;
}
@@ -327,7 +368,7 @@ static struct phy_driver ksphy_driver[] = {
.features = (PHY_BASIC_FEATURES | SUPPORTED_Pause
| SUPPORTED_Asym_Pause),
.flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
- .config_init = kszphy_config_init,
+ .config_init = kszphy_config_init_led8041,
.config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
.ack_interrupt = kszphy_ack_interrupt,
@@ -342,7 +383,7 @@ static struct phy_driver ksphy_driver[] = {
.features = PHY_BASIC_FEATURES |
SUPPORTED_Pause | SUPPORTED_Asym_Pause,
.flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
- .config_init = kszphy_config_init,
+ .config_init = kszphy_config_init_led8041,
.config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
.ack_interrupt = kszphy_ack_interrupt,
@@ -371,7 +412,7 @@ static struct phy_driver ksphy_driver[] = {
.phy_id_mask = 0x00ffffff,
.features = (PHY_BASIC_FEATURES | SUPPORTED_Pause),
.flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
- .config_init = kszphy_config_init,
+ .config_init = kszphy_config_init_led8041,
.config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
.ack_interrupt = kszphy_ack_interrupt,
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 76d96b9ebcdb..1d788f19135b 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -38,6 +38,26 @@
#include <asm/irq.h>
+static const char *phy_speed_to_str(int speed)
+{
+ switch (speed) {
+ case SPEED_10:
+ return "10Mbps";
+ case SPEED_100:
+ return "100Mbps";
+ case SPEED_1000:
+ return "1Gbps";
+ case SPEED_2500:
+ return "2.5Gbps";
+ case SPEED_10000:
+ return "10Gbps";
+ case SPEED_UNKNOWN:
+ return "Unknown";
+ default:
+ return "Unsupported (update phy.c)";
+ }
+}
+
/**
* phy_print_status - Convenience function to print out the current phy status
* @phydev: the phy_device struct
@@ -45,12 +65,13 @@
void phy_print_status(struct phy_device *phydev)
{
if (phydev->link) {
- pr_info("%s - Link is Up - %d/%s\n",
- dev_name(&phydev->dev),
- phydev->speed,
- DUPLEX_FULL == phydev->duplex ? "Full" : "Half");
+ netdev_info(phydev->attached_dev,
+ "Link is Up - %s/%s - flow control %s\n",
+ phy_speed_to_str(phydev->speed),
+ DUPLEX_FULL == phydev->duplex ? "Full" : "Half",
+ phydev->pause ? "rx/tx" : "off");
} else {
- pr_info("%s - Link is Down\n", dev_name(&phydev->dev));
+ netdev_info(phydev->attached_dev, "Link is Down\n");
}
}
EXPORT_SYMBOL(phy_print_status);
@@ -62,7 +83,7 @@ EXPORT_SYMBOL(phy_print_status);
* If the @phydev driver has an ack_interrupt function, call it to
* ack and clear the phy device's interrupt.
*
- * Returns 0 on success on < 0 on error.
+ * Returns 0 on success or < 0 on error.
*/
static int phy_clear_interrupt(struct phy_device *phydev)
{
@@ -77,7 +98,7 @@ static int phy_clear_interrupt(struct phy_device *phydev)
* @phydev: the phy_device struct
* @interrupts: interrupt flags to configure for this @phydev
*
- * Returns 0 on success on < 0 on error.
+ * Returns 0 on success or < 0 on error.
*/
static int phy_config_interrupt(struct phy_device *phydev, u32 interrupts)
{
@@ -93,15 +114,16 @@ static int phy_config_interrupt(struct phy_device *phydev, u32 interrupts)
* phy_aneg_done - return auto-negotiation status
* @phydev: target phy_device struct
*
- * Description: Reads the status register and returns 0 either if
- * auto-negotiation is incomplete, or if there was an error.
- * Returns BMSR_ANEGCOMPLETE if auto-negotiation is done.
+ * Description: Return the auto-negotiation status from this @phydev
+ * Returns > 0 on success or < 0 on error. 0 means that auto-negotiation
+ * is still pending.
*/
static inline int phy_aneg_done(struct phy_device *phydev)
{
- int retval = phy_read(phydev, MII_BMSR);
+ if (phydev->drv->aneg_done)
+ return phydev->drv->aneg_done(phydev);
- return (retval < 0) ? retval : (retval & BMSR_ANEGCOMPLETE);
+ return genphy_aneg_done(phydev);
}
/* A structure for mapping a particular speed and duplex
@@ -283,7 +305,10 @@ int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd)
ethtool_cmd_speed_set(cmd, phydev->speed);
cmd->duplex = phydev->duplex;
- cmd->port = PORT_MII;
+ if (phydev->interface == PHY_INTERFACE_MODE_MOCA)
+ cmd->port = PORT_BNC;
+ else
+ cmd->port = PORT_MII;
cmd->phy_address = phydev->addr;
cmd->transceiver = phy_is_internal(phydev) ?
XCVR_INTERNAL : XCVR_EXTERNAL;
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 2f6989b1e0dc..0ce606624296 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -139,6 +139,7 @@ static int phy_scan_fixups(struct phy_device *phydev)
mutex_unlock(&phy_fixup_lock);
return err;
}
+ phydev->has_fixups = true;
}
}
mutex_unlock(&phy_fixup_lock);
@@ -534,16 +535,16 @@ static int phy_poll_reset(struct phy_device *phydev)
int phy_init_hw(struct phy_device *phydev)
{
- int ret;
+ int ret = 0;
if (!phydev->drv || !phydev->drv->config_init)
return 0;
- ret = phy_write(phydev, MII_BMCR, BMCR_RESET);
- if (ret < 0)
- return ret;
+ if (phydev->drv->soft_reset)
+ ret = phydev->drv->soft_reset(phydev);
+ else
+ ret = genphy_soft_reset(phydev);
- ret = phy_poll_reset(phydev);
if (ret < 0)
return ret;
@@ -864,6 +865,22 @@ int genphy_config_aneg(struct phy_device *phydev)
}
EXPORT_SYMBOL(genphy_config_aneg);
+/**
+ * genphy_aneg_done - return auto-negotiation status
+ * @phydev: target phy_device struct
+ *
+ * Description: Reads the status register and returns 0 either if
+ * auto-negotiation is incomplete, or if there was an error.
+ * Returns BMSR_ANEGCOMPLETE if auto-negotiation is done.
+ */
+int genphy_aneg_done(struct phy_device *phydev)
+{
+ int retval = phy_read(phydev, MII_BMSR);
+
+ return (retval < 0) ? retval : (retval & BMSR_ANEGCOMPLETE);
+}
+EXPORT_SYMBOL(genphy_aneg_done);
+
static int gen10g_config_aneg(struct phy_device *phydev)
{
return 0;
@@ -1029,6 +1046,27 @@ static int gen10g_read_status(struct phy_device *phydev)
return 0;
}
+/**
+ * genphy_soft_reset - software reset the PHY via BMCR_RESET bit
+ * @phydev: target phy_device struct
+ *
+ * Description: Perform a software PHY reset using the standard
+ * BMCR_RESET bit and poll for the reset bit to be cleared.
+ *
+ * Returns: 0 on success, < 0 on failure
+ */
+int genphy_soft_reset(struct phy_device *phydev)
+{
+ int ret;
+
+ ret = phy_write(phydev, MII_BMCR, BMCR_RESET);
+ if (ret < 0)
+ return ret;
+
+ return phy_poll_reset(phydev);
+}
+EXPORT_SYMBOL(genphy_soft_reset);
+
static int genphy_config_init(struct phy_device *phydev)
{
int val;
@@ -1075,6 +1113,12 @@ static int genphy_config_init(struct phy_device *phydev)
return 0;
}
+static int gen10g_soft_reset(struct phy_device *phydev)
+{
+ /* Do nothing for now */
+ return 0;
+}
+
static int gen10g_config_init(struct phy_device *phydev)
{
/* Temporarily just say we support everything */
@@ -1249,9 +1293,11 @@ static struct phy_driver genphy_driver[] = {
.phy_id = 0xffffffff,
.phy_id_mask = 0xffffffff,
.name = "Generic PHY",
+ .soft_reset = genphy_soft_reset,
.config_init = genphy_config_init,
.features = 0,
.config_aneg = genphy_config_aneg,
+ .aneg_done = genphy_aneg_done,
.read_status = genphy_read_status,
.suspend = genphy_suspend,
.resume = genphy_resume,
@@ -1260,6 +1306,7 @@ static struct phy_driver genphy_driver[] = {
.phy_id = 0xffffffff,
.phy_id_mask = 0xffffffff,
.name = "Generic 10G PHY",
+ .soft_reset = gen10g_soft_reset,
.config_init = gen10g_config_init,
.features = 0,
.config_aneg = gen10g_config_aneg,
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-23 22:43:28 +0000