diff options
Diffstat (limited to 'drivers/net/ixgbe')
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_82599.c | 9 | ||||
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_ethtool.c | 42 |
2 files changed, 33 insertions, 18 deletions
diff --git a/drivers/net/ixgbe/ixgbe_82599.c b/drivers/net/ixgbe/ixgbe_82599.c index 4d83e5916593..3f36d834ccfd 100644 --- a/drivers/net/ixgbe/ixgbe_82599.c +++ b/drivers/net/ixgbe/ixgbe_82599.c @@ -464,6 +464,15 @@ s32 ixgbe_setup_mac_link_speed_multispeed_fiber(struct ixgbe_hw *hw, hw->mac.ops.get_link_capabilities(hw, &phy_link_speed, &negotiation); speed &= phy_link_speed; + /* Set autoneg_advertised value based on input link speed */ + hw->phy.autoneg_advertised = 0; + + if (speed & IXGBE_LINK_SPEED_10GB_FULL) + hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_10GB_FULL; + + if (speed & IXGBE_LINK_SPEED_1GB_FULL) + hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_1GB_FULL; + /* * When the driver changes the link speeds that it can support, * it sets autotry_restart to true to indicate that we need to diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c index 1c110459d33b..e0feaf5725bb 100644 --- a/drivers/net/ixgbe/ixgbe_ethtool.c +++ b/drivers/net/ixgbe/ixgbe_ethtool.c @@ -136,11 +136,12 @@ static int ixgbe_get_settings(struct net_device *netdev, ecmd->supported = SUPPORTED_10000baseT_Full; ecmd->autoneg = AUTONEG_ENABLE; ecmd->transceiver = XCVR_EXTERNAL; - if (hw->phy.media_type == ixgbe_media_type_copper) { + if ((hw->phy.media_type == ixgbe_media_type_copper) || + (hw->mac.type == ixgbe_mac_82599EB)) { ecmd->supported |= (SUPPORTED_1000baseT_Full | - SUPPORTED_TP | SUPPORTED_Autoneg); + SUPPORTED_Autoneg); - ecmd->advertising = (ADVERTISED_TP | ADVERTISED_Autoneg); + ecmd->advertising = ADVERTISED_Autoneg; if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_10GB_FULL) ecmd->advertising |= ADVERTISED_10000baseT_Full; if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_1GB_FULL) @@ -155,7 +156,15 @@ static int ixgbe_get_settings(struct net_device *netdev, ecmd->advertising |= (ADVERTISED_10000baseT_Full | ADVERTISED_1000baseT_Full); - ecmd->port = PORT_TP; + if (hw->phy.media_type == ixgbe_media_type_copper) { + ecmd->supported |= SUPPORTED_TP; + ecmd->advertising |= ADVERTISED_TP; + ecmd->port = PORT_TP; + } else { + ecmd->supported |= SUPPORTED_FIBRE; + ecmd->advertising |= ADVERTISED_FIBRE; + ecmd->port = PORT_FIBRE; + } } else if (hw->phy.media_type == ixgbe_media_type_backplane) { /* Set as FIBRE until SERDES defined in kernel */ switch (hw->device_id) { @@ -203,16 +212,10 @@ static int ixgbe_set_settings(struct net_device *netdev, struct ixgbe_adapter *adapter = netdev_priv(netdev); struct ixgbe_hw *hw = &adapter->hw; u32 advertised, old; - s32 err; + s32 err = 0; - switch (hw->phy.media_type) { - case ixgbe_media_type_fiber: - if ((ecmd->autoneg == AUTONEG_ENABLE) || - (ecmd->speed + ecmd->duplex != SPEED_10000 + DUPLEX_FULL)) - return -EINVAL; - /* in this case we currently only support 10Gb/FULL */ - break; - case ixgbe_media_type_copper: + if ((hw->phy.media_type == ixgbe_media_type_copper) || + (hw->mac.type == ixgbe_mac_82599EB)) { /* 10000/copper and 1000/copper must autoneg * this function does not support any duplex forcing, but can * limit the advertising of the adapter to only 10000 or 1000 */ @@ -228,20 +231,23 @@ static int ixgbe_set_settings(struct net_device *netdev, advertised |= IXGBE_LINK_SPEED_1GB_FULL; if (old == advertised) - break; + return err; /* this sets the link speed and restarts auto-neg */ + hw->mac.autotry_restart = true; err = hw->mac.ops.setup_link_speed(hw, advertised, true, true); if (err) { DPRINTK(PROBE, INFO, "setup link failed with code %d\n", err); hw->mac.ops.setup_link_speed(hw, old, true, true); } - break; - default: - break; + } else { + /* in this case we currently only support 10Gb/FULL */ + if ((ecmd->autoneg == AUTONEG_ENABLE) || + (ecmd->speed + ecmd->duplex != SPEED_10000 + DUPLEX_FULL)) + return -EINVAL; } - return 0; + return err; } static void ixgbe_get_pauseparam(struct net_device *netdev, |