diff options
Diffstat (limited to 'drivers/net/ethernet/natsemi/macsonic.c')
| -rw-r--r-- | drivers/net/ethernet/natsemi/macsonic.c | 49 |
1 files changed, 21 insertions, 28 deletions
diff --git a/drivers/net/ethernet/natsemi/macsonic.c b/drivers/net/ethernet/natsemi/macsonic.c index f6745a893c82..dc690f287a6d 100644 --- a/drivers/net/ethernet/natsemi/macsonic.c +++ b/drivers/net/ethernet/natsemi/macsonic.c @@ -311,8 +311,6 @@ static int mac_onboard_sonic_probe(struct net_device *dev) int sr; bool commslot = macintosh_config->expansion_type == MAC_EXP_PDS_COMM; - printk(KERN_INFO "Checking for internal Macintosh ethernet (SONIC).. "); - /* Bogus probing, on the models which may or may not have Ethernet (BTW, the Ethernet *is* always at the same address, and nothing else lives there, at least if Apple's @@ -322,13 +320,11 @@ static int mac_onboard_sonic_probe(struct net_device *dev) card_present = hwreg_present((void*)ONBOARD_SONIC_REGISTERS); if (!card_present) { - printk("none.\n"); + pr_info("Onboard/comm-slot SONIC not found\n"); return -ENODEV; } } - printk("yes\n"); - /* Danger! My arms are flailing wildly! You *must* set lp->reg_offset * and dev->base_addr before using SONIC_READ() or SONIC_WRITE() */ dev->base_addr = ONBOARD_SONIC_REGISTERS; @@ -341,14 +337,11 @@ static int mac_onboard_sonic_probe(struct net_device *dev) printk(KERN_INFO "%s", version); sonic_version_printed = 1; } - printk(KERN_INFO "%s: onboard / comm-slot SONIC at 0x%08lx\n", - dev_name(lp->device), dev->base_addr); /* The PowerBook's SONIC is 16 bit always. */ if (macintosh_config->ident == MAC_MODEL_PB520) { lp->reg_offset = 0; lp->dma_bitmode = SONIC_BITMODE16; - sr = SONIC_READ(SONIC_SR); } else if (commslot) { /* Some of the comm-slot cards are 16 bit. But some of them are not. The 32-bit cards use offset 2 and @@ -365,22 +358,21 @@ static int mac_onboard_sonic_probe(struct net_device *dev) else { lp->dma_bitmode = SONIC_BITMODE16; lp->reg_offset = 0; - sr = SONIC_READ(SONIC_SR); } } else { /* All onboard cards are at offset 2 with 32 bit DMA. */ lp->reg_offset = 2; lp->dma_bitmode = SONIC_BITMODE32; - sr = SONIC_READ(SONIC_SR); } - printk(KERN_INFO - "%s: revision 0x%04x, using %d bit DMA and register offset %d\n", - dev_name(lp->device), sr, lp->dma_bitmode?32:16, lp->reg_offset); -#if 0 /* This is sometimes useful to find out how MacOS configured the card. */ - printk(KERN_INFO "%s: DCR: 0x%04x, DCR2: 0x%04x\n", dev_name(lp->device), - SONIC_READ(SONIC_DCR) & 0xffff, SONIC_READ(SONIC_DCR2) & 0xffff); -#endif + pr_info("Onboard/comm-slot SONIC, revision 0x%04x, %d bit DMA, register offset %d\n", + SONIC_READ(SONIC_SR), lp->dma_bitmode ? 32 : 16, + lp->reg_offset); + + /* This is sometimes useful to find out how MacOS configured the card */ + pr_debug("%s: DCR=0x%04x, DCR2=0x%04x\n", __func__, + SONIC_READ(SONIC_DCR) & 0xffff, + SONIC_READ(SONIC_DCR2) & 0xffff); /* Software reset, then initialize control registers. */ SONIC_WRITE(SONIC_CMD, SONIC_CR_RST); @@ -401,6 +393,9 @@ static int mac_onboard_sonic_probe(struct net_device *dev) /* Now look for the MAC address. */ mac_onboard_sonic_ethernet_addr(dev); + pr_info("SONIC ethernet @%08lx, MAC %pM, IRQ %d\n", + dev->base_addr, dev->dev_addr, dev->irq); + /* Shared init code */ return macsonic_init(dev); } @@ -508,15 +503,15 @@ static int mac_sonic_nubus_probe_board(struct nubus_board *board, int id, printk(KERN_INFO "%s", version); sonic_version_printed = 1; } - printk(KERN_INFO "%s: %s in slot %X\n", - dev_name(lp->device), board->name, board->slot); - printk(KERN_INFO "%s: revision 0x%04x, using %d bit DMA and register offset %d\n", - dev_name(lp->device), SONIC_READ(SONIC_SR), dma_bitmode?32:16, reg_offset); - -#if 0 /* This is sometimes useful to find out how MacOS configured the card. */ - printk(KERN_INFO "%s: DCR: 0x%04x, DCR2: 0x%04x\n", dev_name(lp->device), - SONIC_READ(SONIC_DCR) & 0xffff, SONIC_READ(SONIC_DCR2) & 0xffff); -#endif + + dev_info(&board->dev, "%s, revision 0x%04x, %d bit DMA, register offset %d\n", + board->name, SONIC_READ(SONIC_SR), + lp->dma_bitmode ? 32 : 16, lp->reg_offset); + + /* This is sometimes useful to find out how MacOS configured the card */ + dev_dbg(&board->dev, "%s: DCR=0x%04x, DCR2=0x%04x\n", __func__, + SONIC_READ(SONIC_DCR) & 0xffff, + SONIC_READ(SONIC_DCR2) & 0xffff); /* Software reset, then initialize control registers. */ SONIC_WRITE(SONIC_CMD, SONIC_CR_RST); @@ -564,8 +559,6 @@ static int mac_sonic_platform_probe(struct platform_device *pdev) if (err) goto out; - printk("%s: MAC %pM IRQ %d\n", dev->name, dev->dev_addr, dev->irq); - return 0; out: |