diff options
Diffstat (limited to 'drivers/net/ethernet/cisco/enic/enic_main.c')
| -rw-r--r-- | drivers/net/ethernet/cisco/enic/enic_main.c | 150 |
1 files changed, 150 insertions, 0 deletions
diff --git a/drivers/net/ethernet/cisco/enic/enic_main.c b/drivers/net/ethernet/cisco/enic/enic_main.c index 2945718ce806..0d8995cc92ed 100644 --- a/drivers/net/ethernet/cisco/enic/enic_main.c +++ b/drivers/net/ethernet/cisco/enic/enic_main.c @@ -38,6 +38,7 @@ #include <linux/rtnetlink.h> #include <linux/prefetch.h> #include <net/ip6_checksum.h> +#include <linux/ktime.h> #include "cq_enet_desc.h" #include "vnic_dev.h" @@ -72,6 +73,35 @@ MODULE_LICENSE("GPL"); MODULE_VERSION(DRV_VERSION); MODULE_DEVICE_TABLE(pci, enic_id_table); +#define ENIC_LARGE_PKT_THRESHOLD 1000 +#define ENIC_MAX_COALESCE_TIMERS 10 +/* Interrupt moderation table, which will be used to decide the + * coalescing timer values + * {rx_rate in Mbps, mapping percentage of the range} + */ +struct enic_intr_mod_table mod_table[ENIC_MAX_COALESCE_TIMERS + 1] = { + {4000, 0}, + {4400, 10}, + {5060, 20}, + {5230, 30}, + {5540, 40}, + {5820, 50}, + {6120, 60}, + {6435, 70}, + {6745, 80}, + {7000, 90}, + {0xFFFFFFFF, 100} +}; + +/* This table helps the driver to pick different ranges for rx coalescing + * timer depending on the link speed. + */ +struct enic_intr_mod_range mod_range[ENIC_MAX_LINK_SPEEDS] = { + {0, 0}, /* 0 - 4 Gbps */ + {0, 3}, /* 4 - 10 Gbps */ + {3, 6}, /* 10 - 40 Gbps */ +}; + int enic_is_dynamic(struct enic *enic) { return enic->pdev->device == PCI_DEVICE_ID_CISCO_VIC_ENET_DYN; @@ -979,6 +1009,15 @@ static int enic_rq_alloc_buf(struct vnic_rq *rq) return 0; } +static void enic_intr_update_pkt_size(struct vnic_rx_bytes_counter *pkt_size, + u32 pkt_len) +{ + if (ENIC_LARGE_PKT_THRESHOLD <= pkt_len) + pkt_size->large_pkt_bytes_cnt += pkt_len; + else + pkt_size->small_pkt_bytes_cnt += pkt_len; +} + static void enic_rq_indicate_buf(struct vnic_rq *rq, struct cq_desc *cq_desc, struct vnic_rq_buf *buf, int skipped, void *opaque) @@ -986,6 +1025,7 @@ static void enic_rq_indicate_buf(struct vnic_rq *rq, struct enic *enic = vnic_dev_priv(rq->vdev); struct net_device *netdev = enic->netdev; struct sk_buff *skb; + struct vnic_cq *cq = &enic->cq[enic_cq_rq(enic, rq->index)]; u8 type, color, eop, sop, ingress_port, vlan_stripped; u8 fcoe, fcoe_sof, fcoe_fc_crc_ok, fcoe_enc_error, fcoe_eof; @@ -1056,6 +1096,9 @@ static void enic_rq_indicate_buf(struct vnic_rq *rq, napi_gro_receive(&enic->napi[q_number], skb); else netif_receive_skb(skb); + if (enic->rx_coalesce_setting.use_adaptive_rx_coalesce) + enic_intr_update_pkt_size(&cq->pkt_size_counter, + bytes_written); } else { /* Buffer overflow @@ -1134,6 +1177,64 @@ static int enic_poll(struct napi_struct *napi, int budget) return rq_work_done; } +static void enic_set_int_moderation(struct enic *enic, struct vnic_rq *rq) +{ + unsigned int intr = enic_msix_rq_intr(enic, rq->index); + struct vnic_cq *cq = &enic->cq[enic_cq_rq(enic, rq->index)]; + u32 timer = cq->tobe_rx_coal_timeval; + + if (cq->tobe_rx_coal_timeval != cq->cur_rx_coal_timeval) { + vnic_intr_coalescing_timer_set(&enic->intr[intr], timer); + cq->cur_rx_coal_timeval = cq->tobe_rx_coal_timeval; + } +} + +static void enic_calc_int_moderation(struct enic *enic, struct vnic_rq *rq) +{ + struct enic_rx_coal *rx_coal = &enic->rx_coalesce_setting; + struct vnic_cq *cq = &enic->cq[enic_cq_rq(enic, rq->index)]; + struct vnic_rx_bytes_counter *pkt_size_counter = &cq->pkt_size_counter; + int index; + u32 timer; + u32 range_start; + u32 traffic; + u64 delta; + ktime_t now = ktime_get(); + + delta = ktime_us_delta(now, cq->prev_ts); + if (delta < ENIC_AIC_TS_BREAK) + return; + cq->prev_ts = now; + + traffic = pkt_size_counter->large_pkt_bytes_cnt + + pkt_size_counter->small_pkt_bytes_cnt; + /* The table takes Mbps + * traffic *= 8 => bits + * traffic *= (10^6 / delta) => bps + * traffic /= 10^6 => Mbps + * + * Combining, traffic *= (8 / delta) + */ + + traffic <<= 3; + traffic /= delta; + + for (index = 0; index < ENIC_MAX_COALESCE_TIMERS; index++) + if (traffic < mod_table[index].rx_rate) + break; + range_start = (pkt_size_counter->small_pkt_bytes_cnt > + pkt_size_counter->large_pkt_bytes_cnt << 1) ? + rx_coal->small_pkt_range_start : + rx_coal->large_pkt_range_start; + timer = range_start + ((rx_coal->range_end - range_start) * + mod_table[index].range_percent / 100); + /* Damping */ + cq->tobe_rx_coal_timeval = (timer + cq->tobe_rx_coal_timeval) >> 1; + + pkt_size_counter->large_pkt_bytes_cnt = 0; + pkt_size_counter->small_pkt_bytes_cnt = 0; +} + static int enic_poll_msix(struct napi_struct *napi, int budget) { struct net_device *netdev = napi->dev; @@ -1171,6 +1272,13 @@ static int enic_poll_msix(struct napi_struct *napi, int budget) if (err) work_done = work_to_do; + if (enic->rx_coalesce_setting.use_adaptive_rx_coalesce) + /* Call the function which refreshes + * the intr coalescing timer value based on + * the traffic. This is supported only in + * the case of MSI-x mode + */ + enic_calc_int_moderation(enic, &enic->rq[rq]); if (work_done < work_to_do) { @@ -1179,6 +1287,8 @@ static int enic_poll_msix(struct napi_struct *napi, int budget) */ napi_complete(napi); + if (enic->rx_coalesce_setting.use_adaptive_rx_coalesce) + enic_set_int_moderation(enic, &enic->rq[rq]); vnic_intr_unmask(&enic->intr[intr]); } @@ -1314,6 +1424,42 @@ static void enic_synchronize_irqs(struct enic *enic) } } +static void enic_set_rx_coal_setting(struct enic *enic) +{ + unsigned int speed; + int index = -1; + struct enic_rx_coal *rx_coal = &enic->rx_coalesce_setting; + + /* If intr mode is not MSIX, do not do adaptive coalescing */ + if (VNIC_DEV_INTR_MODE_MSIX != vnic_dev_get_intr_mode(enic->vdev)) { + netdev_info(enic->netdev, "INTR mode is not MSIX, Not initializing adaptive coalescing"); + return; + } + + /* 1. Read the link speed from fw + * 2. Pick the default range for the speed + * 3. Update it in enic->rx_coalesce_setting + */ + speed = vnic_dev_port_speed(enic->vdev); + if (ENIC_LINK_SPEED_10G < speed) + index = ENIC_LINK_40G_INDEX; + else if (ENIC_LINK_SPEED_4G < speed) + index = ENIC_LINK_10G_INDEX; + else + index = ENIC_LINK_4G_INDEX; + + rx_coal->small_pkt_range_start = mod_range[index].small_pkt_range_start; + rx_coal->large_pkt_range_start = mod_range[index].large_pkt_range_start; + rx_coal->range_end = ENIC_RX_COALESCE_RANGE_END; + + /* Start with the value provided by UCSM */ + for (index = 0; index < enic->rq_count; index++) + enic->cq[index].cur_rx_coal_timeval = + enic->config.intr_timer_usec; + + rx_coal->use_adaptive_rx_coalesce = 1; +} + static int enic_dev_notify_set(struct enic *enic) { int err; @@ -2231,6 +2377,7 @@ static int enic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) enic->notify_timer.function = enic_notify_timer; enic->notify_timer.data = (unsigned long)enic; + enic_set_rx_coal_setting(enic); INIT_WORK(&enic->reset, enic_reset); INIT_WORK(&enic->change_mtu_work, enic_change_mtu_work); @@ -2250,6 +2397,9 @@ static int enic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) } enic->tx_coalesce_usecs = enic->config.intr_timer_usec; + /* rx coalesce time already got initialized. This gets used + * if adaptive coal is turned off + */ enic->rx_coalesce_usecs = enic->tx_coalesce_usecs; if (enic_is_dynamic(enic) || enic_is_sriov_vf(enic)) |