diff options
Diffstat (limited to 'drivers/mtd')
| -rw-r--r-- | drivers/mtd/nand/raw/qcom_nandc.c | 68 |
1 files changed, 51 insertions, 17 deletions
diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c index f69457c80be7..667e4bfe369f 100644 --- a/drivers/mtd/nand/raw/qcom_nandc.c +++ b/drivers/mtd/nand/raw/qcom_nandc.c @@ -145,6 +145,7 @@ #define OP_PAGE_READ 0x2 #define OP_PAGE_READ_WITH_ECC 0x3 #define OP_PAGE_READ_WITH_ECC_SPARE 0x4 +#define OP_PAGE_READ_ONFI_READ 0x5 #define OP_PROGRAM_PAGE 0x6 #define OP_PAGE_PROGRAM_WITH_ECC 0x7 #define OP_PROGRAM_PAGE_SPARE 0x9 @@ -460,12 +461,14 @@ struct qcom_nand_host { * @ecc_modes - ecc mode for NAND * @is_bam - whether NAND controller is using BAM * @is_qpic - whether NAND CTRL is part of qpic IP + * @qpic_v2 - flag to indicate QPIC IP version 2 * @dev_cmd_reg_start - NAND_DEV_CMD_* registers starting offset */ struct qcom_nandc_props { u32 ecc_modes; bool is_bam; bool is_qpic; + bool qpic_v2; u32 dev_cmd_reg_start; }; @@ -1164,7 +1167,13 @@ static int nandc_param(struct qcom_nand_host *host) * in use. we configure the controller to perform a raw read of 512 * bytes to read onfi params */ - nandc_set_reg(nandc, NAND_FLASH_CMD, OP_PAGE_READ | PAGE_ACC | LAST_PAGE); + if (nandc->props->qpic_v2) + nandc_set_reg(nandc, NAND_FLASH_CMD, OP_PAGE_READ_ONFI_READ | + PAGE_ACC | LAST_PAGE); + else + nandc_set_reg(nandc, NAND_FLASH_CMD, OP_PAGE_READ | + PAGE_ACC | LAST_PAGE); + nandc_set_reg(nandc, NAND_ADDR0, 0); nandc_set_reg(nandc, NAND_ADDR1, 0); nandc_set_reg(nandc, NAND_DEV0_CFG0, 0 << CW_PER_PAGE @@ -1180,21 +1189,28 @@ static int nandc_param(struct qcom_nand_host *host) | 1 << DEV0_CFG1_ECC_DISABLE); nandc_set_reg(nandc, NAND_EBI2_ECC_BUF_CFG, 1 << ECC_CFG_ECC_DISABLE); - /* configure CMD1 and VLD for ONFI param probing */ - nandc_set_reg(nandc, NAND_DEV_CMD_VLD, - (nandc->vld & ~READ_START_VLD)); - nandc_set_reg(nandc, NAND_DEV_CMD1, - (nandc->cmd1 & ~(0xFF << READ_ADDR)) - | NAND_CMD_PARAM << READ_ADDR); + /* configure CMD1 and VLD for ONFI param probing in QPIC v1 */ + if (!nandc->props->qpic_v2) { + nandc_set_reg(nandc, NAND_DEV_CMD_VLD, + (nandc->vld & ~READ_START_VLD)); + nandc_set_reg(nandc, NAND_DEV_CMD1, + (nandc->cmd1 & ~(0xFF << READ_ADDR)) + | NAND_CMD_PARAM << READ_ADDR); + } nandc_set_reg(nandc, NAND_EXEC_CMD, 1); - nandc_set_reg(nandc, NAND_DEV_CMD1_RESTORE, nandc->cmd1); - nandc_set_reg(nandc, NAND_DEV_CMD_VLD_RESTORE, nandc->vld); + if (!nandc->props->qpic_v2) { + nandc_set_reg(nandc, NAND_DEV_CMD1_RESTORE, nandc->cmd1); + nandc_set_reg(nandc, NAND_DEV_CMD_VLD_RESTORE, nandc->vld); + } + nandc_set_read_loc(nandc, 0, 0, 512, 1); - write_reg_dma(nandc, NAND_DEV_CMD_VLD, 1, 0); - write_reg_dma(nandc, NAND_DEV_CMD1, 1, NAND_BAM_NEXT_SGL); + if (!nandc->props->qpic_v2) { + write_reg_dma(nandc, NAND_DEV_CMD_VLD, 1, 0); + write_reg_dma(nandc, NAND_DEV_CMD1, 1, NAND_BAM_NEXT_SGL); + } nandc->buf_count = 512; memset(nandc->data_buffer, 0xff, nandc->buf_count); @@ -1205,8 +1221,10 @@ static int nandc_param(struct qcom_nand_host *host) nandc->buf_count, 0); /* restore CMD1 and VLD regs */ - write_reg_dma(nandc, NAND_DEV_CMD1_RESTORE, 1, 0); - write_reg_dma(nandc, NAND_DEV_CMD_VLD_RESTORE, 1, NAND_BAM_NEXT_SGL); + if (!nandc->props->qpic_v2) { + write_reg_dma(nandc, NAND_DEV_CMD1_RESTORE, 1, 0); + write_reg_dma(nandc, NAND_DEV_CMD_VLD_RESTORE, 1, NAND_BAM_NEXT_SGL); + } return 0; } @@ -2772,8 +2790,10 @@ static int qcom_nandc_setup(struct qcom_nand_controller *nandc) /* kill onenand */ if (!nandc->props->is_qpic) nandc_write(nandc, SFLASHC_BURST_CFG, 0); - nandc_write(nandc, dev_cmd_reg_addr(nandc, NAND_DEV_CMD_VLD), - NAND_DEV_CMD_VLD_VAL); + + if (!nandc->props->qpic_v2) + nandc_write(nandc, dev_cmd_reg_addr(nandc, NAND_DEV_CMD_VLD), + NAND_DEV_CMD_VLD_VAL); /* enable ADM or BAM DMA */ if (nandc->props->is_bam) { @@ -2793,8 +2813,10 @@ static int qcom_nandc_setup(struct qcom_nand_controller *nandc) } /* save the original values of these registers */ - nandc->cmd1 = nandc_read(nandc, dev_cmd_reg_addr(nandc, NAND_DEV_CMD1)); - nandc->vld = NAND_DEV_CMD_VLD_VAL; + if (!nandc->props->qpic_v2) { + nandc->cmd1 = nandc_read(nandc, dev_cmd_reg_addr(nandc, NAND_DEV_CMD1)); + nandc->vld = NAND_DEV_CMD_VLD_VAL; + } return 0; } @@ -3052,6 +3074,14 @@ static const struct qcom_nandc_props ipq8074_nandc_props = { .dev_cmd_reg_start = 0x7000, }; +static const struct qcom_nandc_props sdx55_nandc_props = { + .ecc_modes = (ECC_BCH_4BIT | ECC_BCH_8BIT), + .is_bam = true, + .is_qpic = true, + .qpic_v2 = true, + .dev_cmd_reg_start = 0x7000, +}; + /* * data will hold a struct pointer containing more differences once we support * more controller variants @@ -3073,6 +3103,10 @@ static const struct of_device_id qcom_nandc_of_match[] = { .compatible = "qcom,ipq8074-nand", .data = &ipq8074_nandc_props, }, + { + .compatible = "qcom,sdx55-nand", + .data = &sdx55_nandc_props, + }, {} }; MODULE_DEVICE_TABLE(of, qcom_nandc_of_match); |