diff options
Diffstat (limited to 'drivers/mmc/host')
| -rw-r--r-- | drivers/mmc/host/sdhci-tegra.c | 72 |
1 files changed, 62 insertions, 10 deletions
diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c index 2f08b6e480df..eafaaefab4a6 100644 --- a/drivers/mmc/host/sdhci-tegra.c +++ b/drivers/mmc/host/sdhci-tegra.c @@ -1124,6 +1124,43 @@ static void tegra_sdhci_voltage_switch(struct sdhci_host *host) tegra_host->pad_calib_required = true; } +static void tegra_cqhci_writel(struct cqhci_host *cq_host, u32 val, int reg) +{ + struct mmc_host *mmc = cq_host->mmc; + u8 ctrl; + ktime_t timeout; + bool timed_out; + + /* + * During CQE resume/unhalt, CQHCI driver unhalts CQE prior to + * cqhci_host_ops enable where SDHCI DMA and BLOCK_SIZE registers need + * to be re-configured. + * Tegra CQHCI/SDHCI prevents write access to block size register when + * CQE is unhalted. So handling CQE resume sequence here to configure + * SDHCI block registers prior to exiting CQE halt state. + */ + if (reg == CQHCI_CTL && !(val & CQHCI_HALT) && + cqhci_readl(cq_host, CQHCI_CTL) & CQHCI_HALT) { + sdhci_cqe_enable(mmc); + writel(val, cq_host->mmio + reg); + timeout = ktime_add_us(ktime_get(), 50); + while (1) { + timed_out = ktime_compare(ktime_get(), timeout) > 0; + ctrl = cqhci_readl(cq_host, CQHCI_CTL); + if (!(ctrl & CQHCI_HALT) || timed_out) + break; + } + /* + * CQE usually resumes very quick, but incase if Tegra CQE + * doesn't resume retry unhalt. + */ + if (timed_out) + writel(val, cq_host->mmio + reg); + } else { + writel(val, cq_host->mmio + reg); + } +} + static void sdhci_tegra_update_dcmd_desc(struct mmc_host *mmc, struct mmc_request *mrq, u64 *data) { @@ -1139,20 +1176,34 @@ static void sdhci_tegra_update_dcmd_desc(struct mmc_host *mmc, static void sdhci_tegra_cqe_enable(struct mmc_host *mmc) { struct cqhci_host *cq_host = mmc->cqe_private; - u32 cqcfg = 0; + u32 val; /* - * Tegra SDMMC Controller design prevents write access to BLOCK_COUNT - * registers when CQE is enabled. + * Tegra CQHCI/SDMMC design prevents write access to sdhci block size + * register when CQE is enabled and unhalted. + * CQHCI driver enables CQE prior to activation, so disable CQE before + * programming block size in sdhci controller and enable it back. */ - cqcfg = cqhci_readl(cq_host, CQHCI_CFG); - if (cqcfg & CQHCI_ENABLE) - cqhci_writel(cq_host, (cqcfg & ~CQHCI_ENABLE), CQHCI_CFG); - - sdhci_cqe_enable(mmc); + if (!cq_host->activated) { + val = cqhci_readl(cq_host, CQHCI_CFG); + if (val & CQHCI_ENABLE) + cqhci_writel(cq_host, (val & ~CQHCI_ENABLE), + CQHCI_CFG); + sdhci_cqe_enable(mmc); + if (val & CQHCI_ENABLE) + cqhci_writel(cq_host, val, CQHCI_CFG); + } - if (cqcfg & CQHCI_ENABLE) - cqhci_writel(cq_host, cqcfg, CQHCI_CFG); + /* + * CMD CRC errors are seen sometimes with some eMMC devices when status + * command is sent during transfer of last data block which is the + * default case as send status command block counter (CBC) is 1. + * Recommended fix to set CBC to 0 allowing send status command only + * when data lines are idle. + */ + val = cqhci_readl(cq_host, CQHCI_SSC1); + val &= ~CQHCI_SSC1_CBC_MASK; + cqhci_writel(cq_host, val, CQHCI_SSC1); } static void sdhci_tegra_dumpregs(struct mmc_host *mmc) @@ -1174,6 +1225,7 @@ static u32 sdhci_tegra_cqhci_irq(struct sdhci_host *host, u32 intmask) } static const struct cqhci_host_ops sdhci_tegra_cqhci_ops = { + .write_l = tegra_cqhci_writel, .enable = sdhci_tegra_cqe_enable, .disable = sdhci_cqe_disable, .dumpregs = sdhci_tegra_dumpregs, |