diff options
Diffstat (limited to 'drivers/media/video/cx23885/cx23885-cards.c')
-rw-r--r-- | drivers/media/video/cx23885/cx23885-cards.c | 110 |
1 files changed, 109 insertions, 1 deletions
diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c index b298b730943c..ea88722cb4ab 100644 --- a/drivers/media/video/cx23885/cx23885-cards.c +++ b/drivers/media/video/cx23885/cx23885-cards.c @@ -24,10 +24,14 @@ #include <linux/pci.h> #include <linux/delay.h> #include <media/cx25840.h> +#include <linux/firmware.h> +#include <staging/altera.h> #include "cx23885.h" #include "tuner-xc2028.h" #include "netup-init.h" +#include "altera-ci.h" +#include "xc5000.h" #include "cx23888-ir.h" static unsigned int enable_885_ir; @@ -90,6 +94,7 @@ struct cx23885_board cx23885_boards[] = { .portc = CX23885_MPEG_DVB, .tuner_type = TUNER_PHILIPS_TDA8290, .tuner_addr = 0x42, /* 0x84 >> 1 */ + .tuner_bus = 1, .input = {{ .type = CX23885_VMUX_TELEVISION, .vmux = CX25840_VIN7_CH3 | @@ -187,7 +192,7 @@ struct cx23885_board cx23885_boards[] = { .portb = CX23885_MPEG_DVB, }, [CX23885_BOARD_NETUP_DUAL_DVBS2_CI] = { - .cimax = 1, + .ci_type = 1, .name = "NetUP Dual DVB-S2 CI", .portb = CX23885_MPEG_DVB, .portc = CX23885_MPEG_DVB, @@ -212,6 +217,7 @@ struct cx23885_board cx23885_boards[] = { .name = "Mygica X8506 DMB-TH", .tuner_type = TUNER_XC5000, .tuner_addr = 0x61, + .tuner_bus = 1, .porta = CX23885_ANALOG_VIDEO, .portb = CX23885_MPEG_DVB, .input = { @@ -241,6 +247,7 @@ struct cx23885_board cx23885_boards[] = { .name = "Magic-Pro ProHDTV Extreme 2", .tuner_type = TUNER_XC5000, .tuner_addr = 0x61, + .tuner_bus = 1, .porta = CX23885_ANALOG_VIDEO, .portb = CX23885_MPEG_DVB, .input = { @@ -289,6 +296,7 @@ struct cx23885_board cx23885_boards[] = { .porta = CX23885_ANALOG_VIDEO, .tuner_type = TUNER_XC2028, .tuner_addr = 0x61, + .tuner_bus = 1, .input = {{ .type = CX23885_VMUX_TELEVISION, .vmux = CX25840_VIN2_CH1 | @@ -313,6 +321,7 @@ struct cx23885_board cx23885_boards[] = { .name = "GoTView X5 3D Hybrid", .tuner_type = TUNER_XC5000, .tuner_addr = 0x64, + .tuner_bus = 1, .porta = CX23885_ANALOG_VIDEO, .portb = CX23885_MPEG_DVB, .input = {{ @@ -329,6 +338,21 @@ struct cx23885_board cx23885_boards[] = { CX25840_SVIDEO_CHROMA4, } }, }, + [CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF] = { + .ci_type = 2, + .name = "NetUP Dual DVB-T/C-CI RF", + .porta = CX23885_ANALOG_VIDEO, + .portb = CX23885_MPEG_DVB, + .portc = CX23885_MPEG_DVB, + .num_fds_portb = 2, + .num_fds_portc = 2, + .tuner_type = TUNER_XC5000, + .tuner_addr = 0x64, + .input = { { + .type = CX23885_VMUX_TELEVISION, + .vmux = CX25840_COMPOSITE1, + } }, + }, }; const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards); @@ -520,6 +544,10 @@ struct cx23885_subid cx23885_subids[] = { .subvendor = 0x5654, .subdevice = 0x2390, .card = CX23885_BOARD_GOTVIEW_X5_3D_HYBRID, + }, { + .subvendor = 0x1b55, + .subdevice = 0xe2e4, + .card = CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF, }, }; const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids); @@ -740,6 +768,9 @@ int cx23885_tuner_callback(void *priv, int component, int command, int arg) /* Tuner Reset Command */ bitmask = 0x02; break; + case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF: + altera_ci_tuner_reset(dev, port->nr); + break; } if (bitmask) { @@ -998,6 +1029,33 @@ void cx23885_gpio_setup(struct cx23885_dev *dev) case CX23885_BOARD_GOTVIEW_X5_3D_HYBRID: cx_set(GP0_IO, 0x00010001); /* Bring the part out of reset */ break; + case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF: + /* GPIO-0 ~INT in + GPIO-1 TMS out + GPIO-2 ~reset chips out + GPIO-3 to GPIO-10 data/addr for CA in/out + GPIO-11 ~CS out + GPIO-12 ADDR out + GPIO-13 ~WR out + GPIO-14 ~RD out + GPIO-15 ~RDY in + GPIO-16 TCK out + GPIO-17 TDO in + GPIO-18 TDI out + */ + cx_set(GP0_IO, 0x00060000); /* GPIO-1,2 as out */ + /* GPIO-0 as INT, reset & TMS low */ + cx_clear(GP0_IO, 0x00010006); + mdelay(100);/* reset delay */ + cx_set(GP0_IO, 0x00000004); /* reset high */ + cx_write(MC417_CTL, 0x00000037);/* enable GPIO-3..18 pins */ + /* GPIO-17 is TDO in, GPIO-15 is ~RDY in, rest is out */ + cx_write(MC417_OEN, 0x00005000); + /* ~RD, ~WR high; ADDR low; ~CS high */ + cx_write(MC417_RWD, 0x00000d00); + /* enable irq */ + cx_write(GPIO_ISM, 0x00000000);/* INTERRUPTS active low*/ + break; } } @@ -1113,6 +1171,31 @@ void cx23885_ir_fini(struct cx23885_dev *dev) } } +int netup_jtag_io(void *device, int tms, int tdi, int read_tdo) +{ + int data; + int tdo = 0; + struct cx23885_dev *dev = (struct cx23885_dev *)device; + /*TMS*/ + data = ((cx_read(GP0_IO)) & (~0x00000002)); + data |= (tms ? 0x00020002 : 0x00020000); + cx_write(GP0_IO, data); + + /*TDI*/ + data = ((cx_read(MC417_RWD)) & (~0x0000a000)); + data |= (tdi ? 0x00008000 : 0); + cx_write(MC417_RWD, data); + if (read_tdo) + tdo = (data & 0x00004000) ? 1 : 0; /*TDO*/ + + cx_write(MC417_RWD, data | 0x00002000); + udelay(1); + /*TCK*/ + cx_write(MC417_RWD, data); + + return tdo; +} + void cx23885_ir_pci_int_enable(struct cx23885_dev *dev) { switch (dev->board) { @@ -1212,6 +1295,7 @@ void cx23885_card_setup(struct cx23885_dev *dev) ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; break; case CX23885_BOARD_NETUP_DUAL_DVBS2_CI: + case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF: ts1->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */ ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */ ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; @@ -1271,6 +1355,7 @@ void cx23885_card_setup(struct cx23885_dev *dev) case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H: case CX23885_BOARD_COMPRO_VIDEOMATE_E650F: case CX23885_BOARD_NETUP_DUAL_DVBS2_CI: + case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF: case CX23885_BOARD_COMPRO_VIDEOMATE_E800: case CX23885_BOARD_HAUPPAUGE_HVR1850: case CX23885_BOARD_MYGICA_X8506: @@ -1293,6 +1378,29 @@ void cx23885_card_setup(struct cx23885_dev *dev) case CX23885_BOARD_NETUP_DUAL_DVBS2_CI: netup_initialize(dev); break; + case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF: { + int ret; + const struct firmware *fw; + const char *filename = "dvb-netup-altera-01.fw"; + char *action = "configure"; + struct altera_config netup_config = { + .dev = dev, + .action = action, + .jtag_io = netup_jtag_io, + }; + + netup_initialize(dev); + + ret = request_firmware(&fw, filename, &dev->pci->dev); + if (ret != 0) + printk(KERN_ERR "did not find the firmware file. (%s) " + "Please see linux/Documentation/dvb/ for more details " + "on firmware-problems.", filename); + else + altera_init(&netup_config, fw); + + break; + } } } |