diff options
Diffstat (limited to 'drivers/input')
| -rw-r--r-- | drivers/input/keyboard/Kconfig | 3 | ||||
| -rw-r--r-- | drivers/input/misc/Kconfig | 11 | ||||
| -rw-r--r-- | drivers/input/misc/Makefile | 2 | ||||
| -rw-r--r-- | drivers/input/misc/atc260x-onkey.c | 305 | ||||
| -rw-r--r-- | drivers/input/mouse/elantech.c | 6 | ||||
| -rw-r--r-- | drivers/input/touchscreen/goodix.c | 52 | ||||
| -rw-r--r-- | drivers/input/touchscreen/raspberrypi-ts.c | 2 |
7 files changed, 322 insertions, 59 deletions
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index 32d15809ae58..40a070a2e7f5 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -67,9 +67,6 @@ config KEYBOARD_AMIGA To compile this driver as a module, choose M here: the module will be called amikbd. -config ATARI_KBD_CORE - bool - config KEYBOARD_APPLESPI tristate "Apple SPI keyboard and trackpad" depends on ACPI && EFI diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index bbab23a58c59..498cde376981 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -94,6 +94,17 @@ config INPUT_ARIZONA_HAPTICS To compile this driver as a module, choose M here: the module will be called arizona-haptics. +config INPUT_ATC260X_ONKEY + tristate "Actions Semi ATC260x PMIC ONKEY" + depends on MFD_ATC260X + help + Support the ONKEY of ATC260x PMICs as an input device reporting + power button status. ONKEY can be used to wakeup from low power + modes and force a reset on long press. + + To compile this driver as a module, choose M here: the + module will be called atc260x-onkey. + config INPUT_ATMEL_CAPTOUCH tristate "Atmel Capacitive Touch Button Driver" depends on OF || COMPILE_TEST diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile index 034c80a7ffa1..f593beed7e05 100644 --- a/drivers/input/misc/Makefile +++ b/drivers/input/misc/Makefile @@ -17,6 +17,7 @@ obj-$(CONFIG_INPUT_ADXL34X_SPI) += adxl34x-spi.o obj-$(CONFIG_INPUT_APANEL) += apanel.o obj-$(CONFIG_INPUT_ARIEL_PWRBUTTON) += ariel-pwrbutton.o obj-$(CONFIG_INPUT_ARIZONA_HAPTICS) += arizona-haptics.o +obj-$(CONFIG_INPUT_ATC260X_ONKEY) += atc260x-onkey.o obj-$(CONFIG_INPUT_ATI_REMOTE2) += ati_remote2.o obj-$(CONFIG_INPUT_ATLAS_BTNS) += atlas_btns.o obj-$(CONFIG_INPUT_ATMEL_CAPTOUCH) += atmel_captouch.o @@ -87,4 +88,3 @@ obj-$(CONFIG_INPUT_WM831X_ON) += wm831x-on.o obj-$(CONFIG_INPUT_XEN_KBDDEV_FRONTEND) += xen-kbdfront.o obj-$(CONFIG_INPUT_YEALINK) += yealink.o obj-$(CONFIG_INPUT_IDEAPAD_SLIDEBAR) += ideapad_slidebar.o - diff --git a/drivers/input/misc/atc260x-onkey.c b/drivers/input/misc/atc260x-onkey.c new file mode 100644 index 000000000000..999aabf9dcbd --- /dev/null +++ b/drivers/input/misc/atc260x-onkey.c @@ -0,0 +1,305 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Onkey driver for Actions Semi ATC260x PMICs. + * + * Copyright (c) 2020 Cristian Ciocaltea <cristian.ciocaltea@gmail.com> + */ + +#include <linux/bitfield.h> +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/mfd/atc260x/core.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> + +/* <2s for short press, >2s for long press */ +#define KEY_PRESS_TIME_SEC 2 + +/* Driver internals */ +enum atc260x_onkey_reset_status { + KEY_RESET_HW_DEFAULT, + KEY_RESET_DISABLED, + KEY_RESET_USER_SEL, +}; + +struct atc260x_onkey_params { + u32 reg_int_ctl; + u32 kdwn_state_bm; + u32 long_int_pnd_bm; + u32 short_int_pnd_bm; + u32 kdwn_int_pnd_bm; + u32 press_int_en_bm; + u32 kdwn_int_en_bm; + u32 press_time_bm; + u32 reset_en_bm; + u32 reset_time_bm; +}; + +struct atc260x_onkey { + struct atc260x *atc260x; + const struct atc260x_onkey_params *params; + struct input_dev *input_dev; + struct delayed_work work; + int irq; +}; + +static const struct atc260x_onkey_params atc2603c_onkey_params = { + .reg_int_ctl = ATC2603C_PMU_SYS_CTL2, + .long_int_pnd_bm = ATC2603C_PMU_SYS_CTL2_ONOFF_LONG_PRESS, + .short_int_pnd_bm = ATC2603C_PMU_SYS_CTL2_ONOFF_SHORT_PRESS, + .kdwn_int_pnd_bm = ATC2603C_PMU_SYS_CTL2_ONOFF_PRESS_PD, + .press_int_en_bm = ATC2603C_PMU_SYS_CTL2_ONOFF_INT_EN, + .kdwn_int_en_bm = ATC2603C_PMU_SYS_CTL2_ONOFF_PRESS_INT_EN, + .kdwn_state_bm = ATC2603C_PMU_SYS_CTL2_ONOFF_PRESS, + .press_time_bm = ATC2603C_PMU_SYS_CTL2_ONOFF_PRESS_TIME, + .reset_en_bm = ATC2603C_PMU_SYS_CTL2_ONOFF_PRESS_RESET_EN, + .reset_time_bm = ATC2603C_PMU_SYS_CTL2_ONOFF_RESET_TIME_SEL, +}; + +static const struct atc260x_onkey_params atc2609a_onkey_params = { + .reg_int_ctl = ATC2609A_PMU_SYS_CTL2, + .long_int_pnd_bm = ATC2609A_PMU_SYS_CTL2_ONOFF_LONG_PRESS, + .short_int_pnd_bm = ATC2609A_PMU_SYS_CTL2_ONOFF_SHORT_PRESS, + .kdwn_int_pnd_bm = ATC2609A_PMU_SYS_CTL2_ONOFF_PRESS_PD, + .press_int_en_bm = ATC2609A_PMU_SYS_CTL2_ONOFF_LSP_INT_EN, + .kdwn_int_en_bm = ATC2609A_PMU_SYS_CTL2_ONOFF_PRESS_INT_EN, + .kdwn_state_bm = ATC2609A_PMU_SYS_CTL2_ONOFF_PRESS, + .press_time_bm = ATC2609A_PMU_SYS_CTL2_ONOFF_PRESS_TIME, + .reset_en_bm = ATC2609A_PMU_SYS_CTL2_ONOFF_RESET_EN, + .reset_time_bm = ATC2609A_PMU_SYS_CTL2_ONOFF_RESET_TIME_SEL, +}; + +static int atc2603x_onkey_hw_init(struct atc260x_onkey *onkey, + enum atc260x_onkey_reset_status reset_status, + u32 reset_time, u32 press_time) +{ + u32 reg_bm, reg_val; + + reg_bm = onkey->params->long_int_pnd_bm | + onkey->params->short_int_pnd_bm | + onkey->params->kdwn_int_pnd_bm | + onkey->params->press_int_en_bm | + onkey->params->kdwn_int_en_bm; + + reg_val = reg_bm | press_time; + reg_bm |= onkey->params->press_time_bm; + + if (reset_status == KEY_RESET_DISABLED) { + reg_bm |= onkey->params->reset_en_bm; + } else if (reset_status == KEY_RESET_USER_SEL) { + reg_bm |= onkey->params->reset_en_bm | + onkey->params->reset_time_bm; + reg_val |= onkey->params->reset_en_bm | reset_time; + } + + return regmap_update_bits(onkey->atc260x->regmap, + onkey->params->reg_int_ctl, reg_bm, reg_val); +} + +static void atc260x_onkey_query(struct atc260x_onkey *onkey) +{ + u32 reg_bits; + int ret, key_down; + + ret = regmap_read(onkey->atc260x->regmap, + onkey->params->reg_int_ctl, &key_down); + if (ret) { + key_down = 1; + dev_err(onkey->atc260x->dev, + "Failed to read onkey status: %d\n", ret); + } else { + key_down &= onkey->params->kdwn_state_bm; + } + + /* + * The hardware generates interrupt only when the onkey pin is + * asserted. Hence, the deassertion of the pin is simulated through + * work queue. + */ + if (key_down) { + schedule_delayed_work(&onkey->work, msecs_to_jiffies(200)); + return; + } + + /* + * The key-down status bit is cleared when the On/Off button + * is released. + */ + input_report_key(onkey->input_dev, KEY_POWER, 0); + input_sync(onkey->input_dev); + + reg_bits = onkey->params->long_int_pnd_bm | + onkey->params->short_int_pnd_bm | + onkey->params->kdwn_int_pnd_bm | + onkey->params->press_int_en_bm | + onkey->params->kdwn_int_en_bm; + + /* Clear key press pending events and enable key press interrupts. */ + regmap_update_bits(onkey->atc260x->regmap, onkey->params->reg_int_ctl, + reg_bits, reg_bits); +} + +static void atc260x_onkey_work(struct work_struct *work) +{ + struct atc260x_onkey *onkey = container_of(work, struct atc260x_onkey, + work.work); + atc260x_onkey_query(onkey); +} + +static irqreturn_t atc260x_onkey_irq(int irq, void *data) +{ + struct atc260x_onkey *onkey = data; + int ret; + + /* Disable key press interrupts. */ + ret = regmap_update_bits(onkey->atc260x->regmap, + onkey->params->reg_int_ctl, + onkey->params->press_int_en_bm | + onkey->params->kdwn_int_en_bm, 0); + if (ret) + dev_err(onkey->atc260x->dev, + "Failed to disable interrupts: %d\n", ret); + + input_report_key(onkey->input_dev, KEY_POWER, 1); + input_sync(onkey->input_dev); + + atc260x_onkey_query(onkey); + + return IRQ_HANDLED; +} + +static int atc260x_onkey_open(struct input_dev *dev) +{ + struct atc260x_onkey *onkey = input_get_drvdata(dev); + + enable_irq(onkey->irq); + + return 0; +} + +static void atc260x_onkey_close(struct input_dev *dev) +{ + struct atc260x_onkey *onkey = input_get_drvdata(dev); + + disable_irq(onkey->irq); + cancel_delayed_work_sync(&onkey->work); +} + +static int atc260x_onkey_probe(struct platform_device *pdev) +{ + struct atc260x *atc260x = dev_get_drvdata(pdev->dev.parent); + struct atc260x_onkey *onkey; + struct input_dev *input_dev; + enum atc260x_onkey_reset_status reset_status; + u32 press_time = KEY_PRESS_TIME_SEC, reset_time = 0; + int val, error; + + onkey = devm_kzalloc(&pdev->dev, sizeof(*onkey), GFP_KERNEL); + if (!onkey) + return -ENOMEM; + + error = device_property_read_u32(pdev->dev.parent, + "reset-time-sec", &val); + if (error) { + reset_status = KEY_RESET_HW_DEFAULT; + } else if (val) { + if (val < 6 || val > 12) { + dev_err(&pdev->dev, "reset-time-sec out of range\n"); + return -EINVAL; + } + + reset_status = KEY_RESET_USER_SEL; + reset_time = (val - 6) / 2; + } else { + reset_status = KEY_RESET_DISABLED; + dev_dbg(&pdev->dev, "Disabled reset on long-press\n"); + } + + switch (atc260x->ic_type) { + case ATC2603C: + onkey->params = &atc2603c_onkey_params; + press_time = FIELD_PREP(ATC2603C_PMU_SYS_CTL2_ONOFF_PRESS_TIME, + press_time); + reset_time = FIELD_PREP(ATC2603C_PMU_SYS_CTL2_ONOFF_RESET_TIME_SEL, + reset_time); + break; + case ATC2609A: + onkey->params = &atc2609a_onkey_params; + press_time = FIELD_PREP(ATC2609A_PMU_SYS_CTL2_ONOFF_PRESS_TIME, + press_time); + reset_time = FIELD_PREP(ATC2609A_PMU_SYS_CTL2_ONOFF_RESET_TIME_SEL, + reset_time); + break; + default: + dev_err(&pdev->dev, + "OnKey not supported for ATC260x PMIC type: %u\n", + atc260x->ic_type); + return -EINVAL; + } + + input_dev = devm_input_allocate_device(&pdev->dev); + if (!input_dev) { + dev_err(&pdev->dev, "Failed to allocate input device\n"); + return -ENOMEM; + } + + onkey->input_dev = input_dev; + onkey->atc260x = atc260x; + + input_dev->name = "atc260x-onkey"; + input_dev->phys = "atc260x-onkey/input0"; + input_dev->open = atc260x_onkey_open; + input_dev->close = atc260x_onkey_close; + + input_set_capability(input_dev, EV_KEY, KEY_POWER); + input_set_drvdata(input_dev, onkey); + + INIT_DELAYED_WORK(&onkey->work, atc260x_onkey_work); + + onkey->irq = platform_get_irq(pdev, 0); + if (onkey->irq < 0) + return onkey->irq; + + error = devm_request_threaded_irq(&pdev->dev, onkey->irq, NULL, + atc260x_onkey_irq, IRQF_ONESHOT, + dev_name(&pdev->dev), onkey); + if (error) { + dev_err(&pdev->dev, + "Failed to register IRQ %d: %d\n", onkey->irq, error); + return error; + } + + /* Keep IRQ disabled until atc260x_onkey_open() is called. */ + disable_irq(onkey->irq); + + error = input_register_device(input_dev); + if (error) { + dev_err(&pdev->dev, + "Failed to register input device: %d\n", error); + return error; + } + + error = atc2603x_onkey_hw_init(onkey, reset_status, + reset_time, press_time); + if (error) + return error; + + device_init_wakeup(&pdev->dev, true); + + return 0; +} + +static struct platform_driver atc260x_onkey_driver = { + .probe = atc260x_onkey_probe, + .driver = { + .name = "atc260x-onkey", + }, +}; + +module_platform_driver(atc260x_onkey_driver); + +MODULE_DESCRIPTION("Onkey driver for ATC260x PMICs"); +MODULE_AUTHOR("Cristian Ciocaltea <cristian.ciocaltea@gmail.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c index 97381e2e03ba..2d0bc029619f 100644 --- a/drivers/input/mouse/elantech.c +++ b/drivers/input/mouse/elantech.c @@ -1885,8 +1885,6 @@ static int elantech_create_smbus(struct psmouse *psmouse, }; unsigned int idx = 0; - smbus_board.properties = i2c_props; - i2c_props[idx++] = PROPERTY_ENTRY_U32("touchscreen-size-x", info->x_max + 1); i2c_props[idx++] = PROPERTY_ENTRY_U32("touchscreen-size-y", @@ -1918,6 +1916,10 @@ static int elantech_create_smbus(struct psmouse *psmouse, if (elantech_is_buttonpad(info)) i2c_props[idx++] = PROPERTY_ENTRY_BOOL("elan,clickpad"); + smbus_board.fwnode = fwnode_create_software_node(i2c_props, NULL); + if (IS_ERR(smbus_board.fwnode)) + return PTR_ERR(smbus_board.fwnode); + return psmouse_smbus_init(psmouse, &smbus_board, NULL, 0, false, leave_breadcrumbs); } diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c index c682b028f0a2..4f53d3c57e69 100644 --- a/drivers/input/touchscreen/goodix.c +++ b/drivers/input/touchscreen/goodix.c @@ -178,51 +178,6 @@ static const unsigned long goodix_irq_flags[] = { IRQ_TYPE_LEVEL_HIGH, }; -/* - * Those tablets have their coordinates origin at the bottom right - * of the tablet, as if rotated 180 degrees - */ -static const struct dmi_system_id rotated_screen[] = { -#if defined(CONFIG_DMI) && defined(CONFIG_X86) - { - .ident = "Teclast X89", - .matches = { - /* tPAD is too generic, also match on bios date */ - DMI_MATCH(DMI_BOARD_VENDOR, "TECLAST"), - DMI_MATCH(DMI_BOARD_NAME, "tPAD"), - DMI_MATCH(DMI_BIOS_DATE, "12/19/2014"), - }, - }, - { - .ident = "Teclast X98 Pro", - .matches = { - /* - * Only match BIOS date, because the manufacturers - * BIOS does not report the board name at all - * (sometimes)... - */ - DMI_MATCH(DMI_BOARD_VENDOR, "TECLAST"), - DMI_MATCH(DMI_BIOS_DATE, "10/28/2015"), - }, - }, - { - .ident = "WinBook TW100", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "WinBook"), - DMI_MATCH(DMI_PRODUCT_NAME, "TW100") - } - }, - { - .ident = "WinBook TW700", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "WinBook"), - DMI_MATCH(DMI_PRODUCT_NAME, "TW700") - }, - }, -#endif - {} -}; - static const struct dmi_system_id nine_bytes_report[] = { #if defined(CONFIG_DMI) && defined(CONFIG_X86) { @@ -1123,13 +1078,6 @@ static int goodix_configure_dev(struct goodix_ts_data *ts) ABS_MT_POSITION_Y, ts->prop.max_y); } - if (dmi_check_system(rotated_screen)) { - ts->prop.invert_x = true; - ts->prop.invert_y = true; - dev_dbg(&ts->client->dev, - "Applying '180 degrees rotated screen' quirk\n"); - } - if (dmi_check_system(nine_bytes_report)) { ts->contact_size = 9; diff --git a/drivers/input/touchscreen/raspberrypi-ts.c b/drivers/input/touchscreen/raspberrypi-ts.c index ef6aaed217cf..5000f5fd9ec3 100644 --- a/drivers/input/touchscreen/raspberrypi-ts.c +++ b/drivers/input/touchscreen/raspberrypi-ts.c @@ -160,7 +160,7 @@ static int rpi_ts_probe(struct platform_device *pdev) touchbuf = (u32)ts->fw_regs_phys; error = rpi_firmware_property(fw, RPI_FIRMWARE_FRAMEBUFFER_SET_TOUCHBUF, &touchbuf, sizeof(touchbuf)); - + rpi_firmware_put(fw); if (error || touchbuf != 0) { dev_warn(dev, "Failed to set touchbuf, %d\n", error); return error; |