diff options
Diffstat (limited to 'drivers/infiniband')
| -rw-r--r-- | drivers/infiniband/hw/hfi1/pcie.c | 68 |
1 files changed, 64 insertions, 4 deletions
diff --git a/drivers/infiniband/hw/hfi1/pcie.c b/drivers/infiniband/hw/hfi1/pcie.c index 0bac21e6a658..89c68da1c273 100644 --- a/drivers/infiniband/hw/hfi1/pcie.c +++ b/drivers/infiniband/hw/hfi1/pcie.c @@ -679,6 +679,10 @@ static uint pcie_pset = UNSET_PSET; module_param(pcie_pset, uint, S_IRUGO); MODULE_PARM_DESC(pcie_pset, "PCIe Eq Pset value to use, range is 0-10"); +static uint pcie_ctle = 1; /* discrete on, integrated off */ +module_param(pcie_ctle, uint, S_IRUGO); +MODULE_PARM_DESC(pcie_ctle, "PCIe static CTLE mode, bit 0 - discrete on/off, bit 1 - integrated on/off"); + /* equalization columns */ #define PREC 0 #define ATTN 1 @@ -716,6 +720,36 @@ static const u8 integrated_preliminary_eq[11][3] = { { 0x00, 0x1e, 0x0a }, /* p10 */ }; +static const u8 discrete_ctle_tunings[11][4] = { + /* DC LF HF BW */ + { 0x48, 0x0b, 0x04, 0x04 }, /* p0 */ + { 0x60, 0x05, 0x0f, 0x0a }, /* p1 */ + { 0x50, 0x09, 0x06, 0x06 }, /* p2 */ + { 0x68, 0x05, 0x0f, 0x0a }, /* p3 */ + { 0x80, 0x05, 0x0f, 0x0a }, /* p4 */ + { 0x70, 0x05, 0x0f, 0x0a }, /* p5 */ + { 0x68, 0x05, 0x0f, 0x0a }, /* p6 */ + { 0x38, 0x0f, 0x00, 0x00 }, /* p7 */ + { 0x48, 0x09, 0x06, 0x06 }, /* p8 */ + { 0x60, 0x05, 0x0f, 0x0a }, /* p9 */ + { 0x38, 0x0f, 0x00, 0x00 }, /* p10 */ +}; + +static const u8 integrated_ctle_tunings[11][4] = { + /* DC LF HF BW */ + { 0x38, 0x0f, 0x00, 0x00 }, /* p0 */ + { 0x38, 0x0f, 0x00, 0x00 }, /* p1 */ + { 0x38, 0x0f, 0x00, 0x00 }, /* p2 */ + { 0x38, 0x0f, 0x00, 0x00 }, /* p3 */ + { 0x58, 0x0a, 0x05, 0x05 }, /* p4 */ + { 0x48, 0x0a, 0x05, 0x05 }, /* p5 */ + { 0x40, 0x0a, 0x05, 0x05 }, /* p6 */ + { 0x38, 0x0f, 0x00, 0x00 }, /* p7 */ + { 0x38, 0x0f, 0x00, 0x00 }, /* p8 */ + { 0x38, 0x09, 0x06, 0x06 }, /* p9 */ + { 0x38, 0x0e, 0x01, 0x01 }, /* p10 */ +}; + /* helper to format the value to write to hardware */ #define eq_value(pre, curr, post) \ ((((u32)(pre)) << \ @@ -951,11 +985,14 @@ int do_pcie_gen3_transition(struct hfi1_devdata *dd) u32 status, err; int ret; int do_retry, retry_count = 0; + int intnum = 0; uint default_pset; u16 target_vector, target_speed; u16 lnkctl2, vendor; u8 div; const u8 (*eq)[3]; + const u8 (*ctle_tunings)[4]; + uint static_ctle_mode; int return_error = 0; /* PCIe Gen3 is for the ASIC only */ @@ -1089,6 +1126,9 @@ retry: div = 3; eq = discrete_preliminary_eq; default_pset = DEFAULT_DISCRETE_PSET; + ctle_tunings = discrete_ctle_tunings; + /* bit 0 - discrete on/off */ + static_ctle_mode = pcie_ctle & 0x1; } else { /* 400mV, FS=29, LF = 9 */ fs = 29; @@ -1096,6 +1136,9 @@ retry: div = 1; eq = integrated_preliminary_eq; default_pset = DEFAULT_MCP_PSET; + ctle_tunings = integrated_ctle_tunings; + /* bit 1 - integrated on/off */ + static_ctle_mode = (pcie_ctle >> 1) & 0x1; } pci_write_config_dword(dd->pcidev, PCIE_CFG_REG_PL101, (fs << @@ -1135,16 +1178,33 @@ retry: * step 5c: Program gasket interrupts */ /* set the Rx Bit Rate to REFCLK ratio */ - write_gasket_interrupt(dd, 0, 0x0006, 0x0050); + write_gasket_interrupt(dd, intnum++, 0x0006, 0x0050); /* disable pCal for PCIe Gen3 RX equalization */ - write_gasket_interrupt(dd, 1, 0x0026, 0x5b01); + /* select adaptive or static CTLE */ + write_gasket_interrupt(dd, intnum++, 0x0026, + 0x5b01 | (static_ctle_mode << 3)); /* * Enable iCal for PCIe Gen3 RX equalization, and set which * evaluation of RX_EQ_EVAL will launch the iCal procedure. */ - write_gasket_interrupt(dd, 2, 0x0026, 0x5202); + write_gasket_interrupt(dd, intnum++, 0x0026, 0x5202); + + if (static_ctle_mode) { + /* apply static CTLE tunings */ + u8 pcie_dc, pcie_lf, pcie_hf, pcie_bw; + + pcie_dc = ctle_tunings[pcie_pset][0]; + pcie_lf = ctle_tunings[pcie_pset][1]; + pcie_hf = ctle_tunings[pcie_pset][2]; + pcie_bw = ctle_tunings[pcie_pset][3]; + write_gasket_interrupt(dd, intnum++, 0x0026, 0x0200 | pcie_dc); + write_gasket_interrupt(dd, intnum++, 0x0026, 0x0100 | pcie_lf); + write_gasket_interrupt(dd, intnum++, 0x0026, 0x0000 | pcie_hf); + write_gasket_interrupt(dd, intnum++, 0x0026, 0x5500 | pcie_bw); + } + /* terminate list */ - write_gasket_interrupt(dd, 3, 0x0000, 0x0000); + write_gasket_interrupt(dd, intnum++, 0x0000, 0x0000); /* * step 5d: program XMT margin |