diff options
Diffstat (limited to 'drivers/i2c')
| -rw-r--r-- | drivers/i2c/chips/Kconfig | 38 | ||||
| -rw-r--r-- | drivers/i2c/chips/Makefile | 3 | ||||
| -rw-r--r-- | drivers/i2c/chips/ds1337.c | 410 | ||||
| -rw-r--r-- | drivers/i2c/chips/ds1374.c | 267 | ||||
| -rw-r--r-- | drivers/i2c/chips/m41t00.c | 413 |
5 files changed, 0 insertions, 1131 deletions
diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig index 17702b32eab0..fe3008e59467 100644 --- a/drivers/i2c/chips/Kconfig +++ b/drivers/i2c/chips/Kconfig @@ -4,32 +4,6 @@ menu "Miscellaneous I2C Chip support" -config SENSORS_DS1337 - tristate "Dallas DS1337 and DS1339 Real Time Clock (DEPRECATED)" - depends on EXPERIMENTAL - help - If you say yes here you get support for Dallas Semiconductor - DS1337 and DS1339 real-time clock chips. - - This driver can also be built as a module. If so, the module - will be called ds1337. - - This driver is deprecated and will be dropped soon. Use - rtc-ds1307 instead. - -config SENSORS_DS1374 - tristate "Dallas DS1374 Real Time Clock (DEPRECATED)" - depends on EXPERIMENTAL - help - If you say yes here you get support for Dallas Semiconductor - DS1374 real-time clock chips. - - This driver can also be built as a module. If so, the module - will be called ds1374. - - This driver is deprecated and will be dropped soon. Use - rtc-ds1374 instead. - config DS1682 tristate "Dallas DS1682 Total Elapsed Time Recorder with Alarm" depends on EXPERIMENTAL @@ -130,18 +104,6 @@ config TPS65010 This driver can also be built as a module. If so, the module will be called tps65010. -config SENSORS_M41T00 - tristate "ST M41T00 RTC chip (DEPRECATED)" - depends on PPC32 - help - If you say yes here you get support for the ST M41T00 RTC chip. - - This driver can also be built as a module. If so, the module - will be called m41t00. - - This driver is deprecated and will be dropped soon. Use - rtc-ds1307 or rtc-m41t80 instead. - config SENSORS_MAX6875 tristate "Maxim MAX6875 Power supply supervisor" depends on EXPERIMENTAL diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile index 50d4734b5038..501f00cea782 100644 --- a/drivers/i2c/chips/Makefile +++ b/drivers/i2c/chips/Makefile @@ -2,12 +2,9 @@ # Makefile for miscellaneous I2C chip drivers. # -obj-$(CONFIG_SENSORS_DS1337) += ds1337.o -obj-$(CONFIG_SENSORS_DS1374) += ds1374.o obj-$(CONFIG_DS1682) += ds1682.o obj-$(CONFIG_SENSORS_EEPROM) += eeprom.o obj-$(CONFIG_SENSORS_MAX6875) += max6875.o -obj-$(CONFIG_SENSORS_M41T00) += m41t00.o obj-$(CONFIG_SENSORS_PCA9539) += pca9539.o obj-$(CONFIG_SENSORS_PCF8574) += pcf8574.o obj-$(CONFIG_PCF8575) += pcf8575.o diff --git a/drivers/i2c/chips/ds1337.c b/drivers/i2c/chips/ds1337.c deleted file mode 100644 index ec17d6b684a2..000000000000 --- a/drivers/i2c/chips/ds1337.c +++ /dev/null @@ -1,410 +0,0 @@ -/* - * linux/drivers/i2c/chips/ds1337.c - * - * Copyright (C) 2005 James Chapman <jchapman@katalix.com> - * - * based on linux/drivers/acorn/char/pcf8583.c - * Copyright (C) 2000 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Driver for Dallas Semiconductor DS1337 and DS1339 real time clock chip - */ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/i2c.h> -#include <linux/string.h> -#include <linux/rtc.h> /* get the user-level API */ -#include <linux/bcd.h> -#include <linux/list.h> - -/* Device registers */ -#define DS1337_REG_HOUR 2 -#define DS1337_REG_DAY 3 -#define DS1337_REG_DATE 4 -#define DS1337_REG_MONTH 5 -#define DS1337_REG_CONTROL 14 -#define DS1337_REG_STATUS 15 - -/* FIXME - how do we export these interface constants? */ -#define DS1337_GET_DATE 0 -#define DS1337_SET_DATE 1 - -/* - * Functions declaration - */ -static unsigned short normal_i2c[] = { 0x68, I2C_CLIENT_END }; - -I2C_CLIENT_INSMOD_1(ds1337); - -static int ds1337_attach_adapter(struct i2c_adapter *adapter); -static int ds1337_detect(struct i2c_adapter *adapter, int address, int kind); -static void ds1337_init_client(struct i2c_client *client); -static int ds1337_detach_client(struct i2c_client *client); -static int ds1337_command(struct i2c_client *client, unsigned int cmd, - void *arg); - -/* - * Driver data (common to all clients) - */ -static struct i2c_driver ds1337_driver = { - .driver = { - .name = "ds1337", - }, - .attach_adapter = ds1337_attach_adapter, - .detach_client = ds1337_detach_client, - .command = ds1337_command, -}; - -/* - * Client data (each client gets its own) - */ -struct ds1337_data { - struct i2c_client client; - struct list_head list; -}; - -/* - * Internal variables - */ -static LIST_HEAD(ds1337_clients); - -static inline int ds1337_read(struct i2c_client *client, u8 reg, u8 *value) -{ - s32 tmp = i2c_smbus_read_byte_data(client, reg); - - if (tmp < 0) - return -EIO; - - *value = tmp; - - return 0; -} - -/* - * Chip access functions - */ -static int ds1337_get_datetime(struct i2c_client *client, struct rtc_time *dt) -{ - int result; - u8 buf[7]; - u8 val; - struct i2c_msg msg[2]; - u8 offs = 0; - - if (!dt) { - dev_dbg(&client->dev, "%s: EINVAL: dt=NULL\n", __FUNCTION__); - return -EINVAL; - } - - msg[0].addr = client->addr; - msg[0].flags = 0; - msg[0].len = 1; - msg[0].buf = &offs; - - msg[1].addr = client->addr; - msg[1].flags = I2C_M_RD; - msg[1].len = sizeof(buf); - msg[1].buf = &buf[0]; - - result = i2c_transfer(client->adapter, msg, 2); - - dev_dbg(&client->dev, "%s: [%d] %02x %02x %02x %02x %02x %02x %02x\n", - __FUNCTION__, result, buf[0], buf[1], buf[2], buf[3], - buf[4], buf[5], buf[6]); - - if (result == 2) { - dt->tm_sec = BCD2BIN(buf[0]); - dt->tm_min = BCD2BIN(buf[1]); - val = buf[2] & 0x3f; - dt->tm_hour = BCD2BIN(val); - dt->tm_wday = BCD2BIN(buf[3]) - 1; - dt->tm_mday = BCD2BIN(buf[4]); - val = buf[5] & 0x7f; - dt->tm_mon = BCD2BIN(val) - 1; - dt->tm_year = BCD2BIN(buf[6]); - if (buf[5] & 0x80) - dt->tm_year += 100; - - dev_dbg(&client->dev, "%s: secs=%d, mins=%d, " - "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n", - __FUNCTION__, dt->tm_sec, dt->tm_min, - dt->tm_hour, dt->tm_mday, - dt->tm_mon, dt->tm_year, dt->tm_wday); - - return 0; - } - - dev_err(&client->dev, "error reading data! %d\n", result); - return -EIO; -} - -static int ds1337_set_datetime(struct i2c_client *client, struct rtc_time *dt) -{ - int result; - u8 buf[8]; - u8 val; - struct i2c_msg msg[1]; - - if (!dt) { - dev_dbg(&client->dev, "%s: EINVAL: dt=NULL\n", __FUNCTION__); - return -EINVAL; - } - - dev_dbg(&client->dev, "%s: secs=%d, mins=%d, hours=%d, " - "mday=%d, mon=%d, year=%d, wday=%d\n", __FUNCTION__, - dt->tm_sec, dt->tm_min, dt->tm_hour, - dt->tm_mday, dt->tm_mon, dt->tm_year, dt->tm_wday); - - buf[0] = 0; /* reg offset */ - buf[1] = BIN2BCD(dt->tm_sec); - buf[2] = BIN2BCD(dt->tm_min); - buf[3] = BIN2BCD(dt->tm_hour); - buf[4] = BIN2BCD(dt->tm_wday + 1); - buf[5] = BIN2BCD(dt->tm_mday); - buf[6] = BIN2BCD(dt->tm_mon + 1); - val = dt->tm_year; - if (val >= 100) { - val -= 100; - buf[6] |= (1 << 7); - } - buf[7] = BIN2BCD(val); - - msg[0].addr = client->addr; - msg[0].flags = 0; - msg[0].len = sizeof(buf); - msg[0].buf = &buf[0]; - - result = i2c_transfer(client->adapter, msg, 1); - if (result == 1) - return 0; - - dev_err(&client->dev, "error writing data! %d\n", result); - return -EIO; -} - -static int ds1337_command(struct i2c_client *client, unsigned int cmd, - void *arg) -{ - dev_dbg(&client->dev, "%s: cmd=%d\n", __FUNCTION__, cmd); - - switch (cmd) { - case DS1337_GET_DATE: - return ds1337_get_datetime(client, arg); - - case DS1337_SET_DATE: - return ds1337_set_datetime(client, arg); - - default: - return -EINVAL; - } -} - -/* - * Public API for access to specific device. Useful for low-level - * RTC access from kernel code. - */ -int ds1337_do_command(int bus, int cmd, void *arg) -{ - struct list_head *walk; - struct list_head *tmp; - struct ds1337_data *data; - - list_for_each_safe(walk, tmp, &ds1337_clients) { - data = list_entry(walk, struct ds1337_data, list); - if (data->client.adapter->nr == bus) - return ds1337_command(&data->client, cmd, arg); - } - - return -ENODEV; -} - -static int ds1337_attach_adapter(struct i2c_adapter *adapter) -{ - return i2c_probe(adapter, &addr_data, ds1337_detect); -} - -/* - * The following function does more than just detection. If detection - * succeeds, it also registers the new chip. - */ -static int ds1337_detect(struct i2c_adapter *adapter, int address, int kind) -{ - struct i2c_client *new_client; - struct ds1337_data *data; - int err = 0; - const char *name = ""; - - if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA | - I2C_FUNC_I2C)) - goto exit; - - if (!(data = kzalloc(sizeof(struct ds1337_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - INIT_LIST_HEAD(&data->list); - - /* The common I2C client data is placed right before the - * DS1337-specific data. - */ - new_client = &data->client; - i2c_set_clientdata(new_client, data); - new_client->addr = address; - new_client->adapter = adapter; - new_client->driver = &ds1337_driver; - new_client->flags = 0; - - /* - * Now we do the remaining detection. A negative kind means that - * the driver was loaded with no force parameter (default), so we - * must both detect and identify the chip. A zero kind means that - * the driver was loaded with the force parameter, the detection - * step shall be skipped. A positive kind means that the driver - * was loaded with the force parameter and a given kind of chip is - * requested, so both the detection and the identification steps - * are skipped. - * - * For detection, we read registers that are most likely to cause - * detection failure, i.e. those that have more bits with fixed - * or reserved values. - */ - - /* Default to an DS1337 if forced */ - if (kind == 0) - kind = ds1337; - - if (kind < 0) { /* detection and identification */ - u8 data; - - /* Check that status register bits 6-2 are zero */ - if ((ds1337_read(new_client, DS1337_REG_STATUS, &data) < 0) || - (data & 0x7c)) - goto exit_free; - - /* Check for a valid day register value */ - if ((ds1337_read(new_client, DS1337_REG_DAY, &data) < 0) || - (data == 0) || (data & 0xf8)) - goto exit_free; - - /* Check for a valid date register value */ - if ((ds1337_read(new_client, DS1337_REG_DATE, &data) < 0) || - (data == 0) || (data & 0xc0) || ((data & 0x0f) > 9) || - (data >= 0x32)) - goto exit_free; - - /* Check for a valid month register value */ - if ((ds1337_read(new_client, DS1337_REG_MONTH, &data) < 0) || - (data == 0) || (data & 0x60) || ((data & 0x0f) > 9) || - ((data >= 0x13) && (data <= 0x19))) - goto exit_free; - - /* Check that control register bits 6-5 are zero */ - if ((ds1337_read(new_client, DS1337_REG_CONTROL, &data) < 0) || - (data & 0x60)) - goto exit_free; - - kind = ds1337; - } - - if (kind == ds1337) - name = "ds1337"; - - /* We can fill in the remaining client fields */ - strlcpy(new_client->name, name, I2C_NAME_SIZE); - - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(new_client))) - goto exit_free; - - /* Initialize the DS1337 chip */ - ds1337_init_client(new_client); - - /* Add client to local list */ - list_add(&data->list, &ds1337_clients); - - return 0; - -exit_free: - kfree(data); -exit: - return err; -} - -static void ds1337_init_client(struct i2c_client *client) -{ - u8 status, control; - - /* On some boards, the RTC isn't configured by boot firmware. - * Handle that case by starting/configuring the RTC now. - */ - status = i2c_smbus_read_byte_data(client, DS1337_REG_STATUS); - control = i2c_smbus_read_byte_data(client, DS1337_REG_CONTROL); - - if ((status & 0x80) || (control & 0x80)) { - /* RTC not running */ - u8 buf[1+16]; /* First byte is interpreted as address */ - struct i2c_msg msg[1]; - - dev_dbg(&client->dev, "%s: RTC not running!\n", __FUNCTION__); - - /* Initialize all, including STATUS and CONTROL to zero */ - memset(buf, 0, sizeof(buf)); - - /* Write valid values in the date/time registers */ - buf[1+DS1337_REG_DAY] = 1; - buf[1+DS1337_REG_DATE] = 1; - buf[1+DS1337_REG_MONTH] = 1; - - msg[0].addr = client->addr; - msg[0].flags = 0; - msg[0].len = sizeof(buf); - msg[0].buf = &buf[0]; - - i2c_transfer(client->adapter, msg, 1); - } else { - /* Running: ensure that device is set in 24-hour mode */ - s32 val; - - val = i2c_smbus_read_byte_data(client, DS1337_REG_HOUR); - if ((val >= 0) && (val & (1 << 6))) - i2c_smbus_write_byte_data(client, DS1337_REG_HOUR, - val & 0x3f); - } -} - -static int ds1337_detach_client(struct i2c_client *client) -{ - int err; - struct ds1337_data *data = i2c_get_clientdata(client); - - if ((err = i2c_detach_client(client))) - return err; - - list_del(&data->list); - kfree(data); - return 0; -} - -static int __init ds1337_init(void) -{ - return i2c_add_driver(&ds1337_driver); -} - -static void __exit ds1337_exit(void) -{ - i2c_del_driver(&ds1337_driver); -} - -MODULE_AUTHOR("James Chapman <jchapman@katalix.com>"); -MODULE_DESCRIPTION("DS1337 RTC driver"); -MODULE_LICENSE("GPL"); - -EXPORT_SYMBOL_GPL(ds1337_do_command); - -module_init(ds1337_init); -module_exit(ds1337_exit); diff --git a/drivers/i2c/chips/ds1374.c b/drivers/i2c/chips/ds1374.c deleted file mode 100644 index 8a2ff0c114d9..000000000000 --- a/drivers/i2c/chips/ds1374.c +++ /dev/null @@ -1,267 +0,0 @@ -/* - * drivers/i2c/chips/ds1374.c - * - * I2C client/driver for the Maxim/Dallas DS1374 Real-Time Clock - * - * Author: Randy Vinson <rvinson@mvista.com> - * - * Based on the m41t00.c by Mark Greer <mgreer@mvista.com> - * - * 2005 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -/* - * This i2c client/driver wedges between the drivers/char/genrtc.c RTC - * interface and the SMBus interface of the i2c subsystem. - * It would be more efficient to use i2c msgs/i2c_transfer directly but, as - * recommened in .../Documentation/i2c/writing-clients section - * "Sending and receiving", using SMBus level communication is preferred. - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/i2c.h> -#include <linux/rtc.h> -#include <linux/bcd.h> -#include <linux/mutex.h> -#include <linux/workqueue.h> - -#define DS1374_REG_TOD0 0x00 -#define DS1374_REG_TOD1 0x01 -#define DS1374_REG_TOD2 0x02 -#define DS1374_REG_TOD3 0x03 -#define DS1374_REG_WDALM0 0x04 -#define DS1374_REG_WDALM1 0x05 -#define DS1374_REG_WDALM2 0x06 -#define DS1374_REG_CR 0x07 -#define DS1374_REG_SR 0x08 -#define DS1374_REG_SR_OSF 0x80 -#define DS1374_REG_TCR 0x09 - -#define DS1374_DRV_NAME "ds1374" - -static DEFINE_MUTEX(ds1374_mutex); - -static struct i2c_driver ds1374_driver; -static struct i2c_client *save_client; - -static unsigned short ignore[] = { I2C_CLIENT_END }; -static unsigned short normal_addr[] = { 0x68, I2C_CLIENT_END }; - -static struct i2c_client_address_data addr_data = { - .normal_i2c = normal_addr, - .probe = ignore, - .ignore = ignore, -}; - -static ulong ds1374_read_rtc(void) -{ - ulong time = 0; - int reg = DS1374_REG_WDALM0; - - while (reg--) { - s32 tmp; - if ((tmp = i2c_smbus_read_byte_data(save_client, reg)) < 0) { - dev_warn(&save_client->dev, - "can't read from rtc chip\n"); - return 0; - } - time = (time << 8) | (tmp & 0xff); - } - return time; -} - -static void ds1374_write_rtc(ulong time) -{ - int reg; - - for (reg = DS1374_REG_TOD0; reg < DS1374_REG_WDALM0; reg++) { - if (i2c_smbus_write_byte_data(save_client, reg, time & 0xff) - < 0) { - dev_warn(&save_client->dev, - "can't write to rtc chip\n"); - break; - } - time = time >> 8; - } -} - -static void ds1374_check_rtc_status(void) -{ - s32 tmp; - - tmp = i2c_smbus_read_byte_data(save_client, DS1374_REG_SR); - if (tmp < 0) { - dev_warn(&save_client->dev, - "can't read status from rtc chip\n"); - return; - } - if (tmp & DS1374_REG_SR_OSF) { - dev_warn(&save_client->dev, - "oscillator discontinuity flagged, time unreliable\n"); - tmp &= ~DS1374_REG_SR_OSF; - tmp = i2c_smbus_write_byte_data(save_client, DS1374_REG_SR, - tmp & 0xff); - if (tmp < 0) - dev_warn(&save_client->dev, - "can't clear discontinuity notification\n"); - } -} - -ulong ds1374_get_rtc_time(void) -{ - ulong t1, t2; - int limit = 10; /* arbitrary retry limit */ - - mutex_lock(&ds1374_mutex); - - /* - * Since the reads are being performed one byte at a time using - * the SMBus vs a 4-byte i2c transfer, there is a chance that a - * carry will occur during the read. To detect this, 2 reads are - * performed and compared. - */ - do { - t1 = ds1374_read_rtc(); - t2 = ds1374_read_rtc(); - } while (t1 != t2 && limit--); - - mutex_unlock(&ds1374_mutex); - - if (t1 != t2) { - dev_warn(&save_client->dev, - "can't get consistent time from rtc chip\n"); - t1 = 0; - } - - return t1; -} - -static ulong new_time; - -static void ds1374_set_work(struct work_struct *work) -{ - ulong t1, t2; - int limit = 10; /* arbitrary retry limit */ - - t1 = new_time; - - mutex_lock(&ds1374_mutex); - - /* - * Since the writes are being performed one byte at a time using - * the SMBus vs a 4-byte i2c transfer, there is a chance that a - * carry will occur during the write. To detect this, the write - * value is read back and compared. - */ - do { - ds1374_write_rtc(t1); - t2 = ds1374_read_rtc(); - } while (t1 != t2 && limit--); - - mutex_unlock(&ds1374_mutex); - - if (t1 != t2) - dev_warn(&save_client->dev, - "can't confirm time set from rtc chip\n"); -} - -static struct workqueue_struct *ds1374_workqueue; - -static DECLARE_WORK(ds1374_work, ds1374_set_work); - -int ds1374_set_rtc_time(ulong nowtime) -{ - new_time = nowtime; - - if (in_interrupt()) - queue_work(ds1374_workqueue, &ds1374_work); - else - ds1374_set_work(NULL); - - return 0; -} - -/* - ***************************************************************************** - * - * Driver Interface - * - ***************************************************************************** - */ -static int ds1374_probe(struct i2c_adapter *adap, int addr, int kind) -{ - struct i2c_client *client; - int rc; - - client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); - if (!client) - return -ENOMEM; - - strncpy(client->name, DS1374_DRV_NAME, I2C_NAME_SIZE); - client->addr = addr; - client->adapter = adap; - client->driver = &ds1374_driver; - - ds1374_workqueue = create_singlethread_workqueue("ds1374"); - if (!ds1374_workqueue) { - kfree(client); - return -ENOMEM; /* most expected reason */ - } - - if ((rc = i2c_attach_client(client)) != 0) { - kfree(client); - return rc; - } - - save_client = client; - - ds1374_check_rtc_status(); - - return 0; -} - -static int ds1374_attach(struct i2c_adapter *adap) -{ - return i2c_probe(adap, &addr_data, ds1374_probe); -} - -static int ds1374_detach(struct i2c_client *client) -{ - int rc; - - if ((rc = i2c_detach_client(client)) == 0) { - kfree(i2c_get_clientdata(client)); - destroy_workqueue(ds1374_workqueue); - } - return rc; -} - -static struct i2c_driver ds1374_driver = { - .driver = { - .name = DS1374_DRV_NAME, - }, - .id = I2C_DRIVERID_DS1374, - .attach_adapter = ds1374_attach, - .detach_client = ds1374_detach, -}; - -static int __init ds1374_init(void) -{ - return i2c_add_driver(&ds1374_driver); -} - -static void __exit ds1374_exit(void) -{ - i2c_del_driver(&ds1374_driver); -} - -module_init(ds1374_init); -module_exit(ds1374_exit); - -MODULE_AUTHOR("Randy Vinson <rvinson@mvista.com>"); -MODULE_DESCRIPTION("Maxim/Dallas DS1374 RTC I2C Client Driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/i2c/chips/m41t00.c b/drivers/i2c/chips/m41t00.c deleted file mode 100644 index 3fcb646e2073..000000000000 --- a/drivers/i2c/chips/m41t00.c +++ /dev/null @@ -1,413 +0,0 @@ -/* - * I2C client/driver for the ST M41T00 family of i2c rtc chips. - * - * Author: Mark A. Greer <mgreer@mvista.com> - * - * 2005, 2006 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -/* - * This i2c client/driver wedges between the drivers/char/genrtc.c RTC - * interface and the SMBus interface of the i2c subsystem. - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/i2c.h> -#include <linux/rtc.h> -#include <linux/bcd.h> -#include <linux/workqueue.h> -#include <linux/platform_device.h> -#include <linux/m41t00.h> -#include <asm/time.h> -#include <asm/rtc.h> - -static struct i2c_driver m41t00_driver; -static struct i2c_client *save_client; - -static unsigned short ignore[] = { I2C_CLIENT_END }; -static unsigned short normal_addr[] = { I2C_CLIENT_END, I2C_CLIENT_END }; - -static struct i2c_client_address_data addr_data = { - .normal_i2c = normal_addr, - .probe = ignore, - .ignore = ignore, -}; - -struct m41t00_chip_info { - u8 type; - char *name; - u8 read_limit; - u8 sec; /* Offsets for chip regs */ - u8 min; - u8 hour; - u8 day; - u8 mon; - u8 year; - u8 alarm_mon; - u8 alarm_hour; - u8 sqw; - u8 sqw_freq; -}; - -static struct m41t00_chip_info m41t00_chip_info_tbl[] = { - { - .type = M41T00_TYPE_M41T00, - .name = "m41t00", - .read_limit = 5, - .sec = 0, - .min = 1, - .hour = 2, - .day = 4, - .mon = 5, - .year = 6, - }, - { - .type = M41T00_TYPE_M41T81, - .name = "m41t81", - .read_limit = 1, - .sec = 1, - .min = 2, - .hour = 3, - .day = 5, - .mon = 6, - .year = 7, - .alarm_mon = 0xa, - .alarm_hour = 0xc, - .sqw = 0x13, - }, - { - .type = M41T00_TYPE_M41T85, - .name = "m41t85", - .read_limit = 1, - .sec = 1, - .min = 2, - .hour = 3, - .day = 5, - .mon = 6, - .year = 7, - .alarm_mon = 0xa, - .alarm_hour = 0xc, - .sqw = 0x13, - }, -}; -static struct m41t00_chip_info *m41t00_chip; - -ulong -m41t00_get_rtc_time(void) -{ - s32 sec, min, hour, day, mon, year; - s32 sec1, min1, hour1, day1, mon1, year1; - u8 reads = 0; - u8 buf[8], msgbuf[1] = { 0 }; /* offset into rtc's regs */ - struct i2c_msg msgs[] = { - { - .addr = save_client->addr, - .flags = 0, - .len = 1, - .buf = msgbuf, - }, - { - .addr = save_client->addr, - .flags = I2C_M_RD, - .len = 8, - .buf = buf, - }, - }; - - sec = min = hour = day = mon = year = 0; - - do { - if (i2c_transfer(save_client->adapter, msgs, 2) < 0) - goto read_err; - - sec1 = sec; - min1 = min; - hour1 = hour; - day1 = day; - mon1 = mon; - year1 = year; - - sec = buf[m41t00_chip->sec] & 0x7f; - min = buf[m41t00_chip->min] & 0x7f; - hour = buf[m41t00_chip->hour] & 0x3f; - day = buf[m41t00_chip->day] & 0x3f; - mon = buf[m41t00_chip->mon] & 0x1f; - year = buf[m41t00_chip->year]; - } while ((++reads < m41t00_chip->read_limit) && ((sec != sec1) - || (min != min1) || (hour != hour1) || (day != day1) - || (mon != mon1) || (year != year1))); - - if ((m41t00_chip->read_limit > 1) && ((sec != sec1) || (min != min1) - || (hour != hour1) || (day != day1) || (mon != mon1) - || (year != year1))) - goto read_err; - - sec = BCD2BIN(sec); - min = BCD2BIN(min); - hour = BCD2BIN(hour); - day = BCD2BIN(day); - mon = BCD2BIN(mon); - year = BCD2BIN(year); - - year += 1900; - if (year < 1970) - year += 100; - - return mktime(year, mon, day, hour, min, sec); - -read_err: - dev_err(&save_client->dev, "m41t00_get_rtc_time: Read error\n"); - return 0; -} -EXPORT_SYMBOL_GPL(m41t00_get_rtc_time); - -static void -m41t00_set(void *arg) -{ - struct rtc_time tm; - int nowtime = *(int *)arg; - s32 sec, min, hour, day, mon, year; - u8 wbuf[9], *buf = &wbuf[1], msgbuf[1] = { 0 }; - struct i2c_msg msgs[] = { - { - .addr = save_client->addr, - .flags = 0, - .len = 1, - .buf = msgbuf, - }, - { - .addr = save_client->addr, - .flags = I2C_M_RD, - .len = 8, - .buf = buf, - }, - }; - - to_tm(nowtime, &tm); - tm.tm_year = (tm.tm_year - 1900) % 100; - - sec = BIN2BCD(tm.tm_sec); - min = BIN2BCD(tm.tm_min); - hour = BIN2BCD(tm.tm_hour); - day = BIN2BCD(tm.tm_mday); - mon = BIN2BCD(tm.tm_mon); - year = BIN2BCD(tm.tm_year); - - /* Read reg values into buf[0..7]/wbuf[1..8] */ - if (i2c_transfer(save_client->adapter, msgs, 2) < 0) { - dev_err(&save_client->dev, "m41t00_set: Read error\n"); - return; - } - - wbuf[0] = 0; /* offset into rtc's regs */ - buf[m41t00_chip->sec] = (buf[m41t00_chip->sec] & ~0x7f) | (sec & 0x7f); - buf[m41t00_chip->min] = (buf[m41t00_chip->min] & ~0x7f) | (min & 0x7f); - buf[m41t00_chip->hour] = (buf[m41t00_chip->hour] & ~0x3f) | (hour& 0x3f); - buf[m41t00_chip->day] = (buf[m41t00_chip->day] & ~0x3f) | (day & 0x3f); - buf[m41t00_chip->mon] = (buf[m41t00_chip->mon] & ~0x1f) | (mon & 0x1f); - buf[m41t00_chip->year] = year; - - if (i2c_master_send(save_client, wbuf, 9) < 0) - dev_err(&save_client->dev, "m41t00_set: Write error\n"); -} - -static ulong new_time; -/* well, isn't this API just _lovely_? */ -static void -m41t00_barf(struct work_struct *unusable) -{ - m41t00_set(&new_time); -} - -static struct workqueue_struct *m41t00_wq; -static DECLARE_WORK(m41t00_work, m41t00_barf); - -int -m41t00_set_rtc_time(ulong nowtime) -{ - new_time = nowtime; - - if (in_interrupt()) - queue_work(m41t00_wq, &m41t00_work); - else - m41t00_set(&new_time); - - return 0; -} -EXPORT_SYMBOL_GPL(m41t00_set_rtc_time); - -/* - ***************************************************************************** - * - * platform_data Driver Interface - * - ***************************************************************************** - */ -static int __init -m41t00_platform_probe(struct platform_device *pdev) -{ - struct m41t00_platform_data *pdata; - int i; - - if (pdev && (pdata = pdev->dev.platform_data)) { - normal_addr[0] = pdata->i2c_addr; - - for (i=0; i<ARRAY_SIZE(m41t00_chip_info_tbl); i++) - if (m41t00_chip_info_tbl[i].type == pdata->type) { - m41t00_chip = &m41t00_chip_info_tbl[i]; - m41t00_chip->sqw_freq = pdata->sqw_freq; - return 0; - } - } - return -ENODEV; -} - -static int __exit -m41t00_platform_remove(struct platform_device *pdev) -{ - return 0; -} - -static struct platform_driver m41t00_platform_driver = { - .probe = m41t00_platform_probe, - .remove = m41t00_platform_remove, - .driver = { - .owner = THIS_MODULE, - .name = M41T00_DRV_NAME, - }, -}; - -/* - ***************************************************************************** - * - * Driver Interface - * - ***************************************************************************** - */ -static int -m41t00_probe(struct i2c_adapter *adap, int addr, int kind) -{ - struct i2c_client *client; - int rc; - - if (!i2c_check_functionality(adap, I2C_FUNC_I2C - | I2C_FUNC_SMBUS_BYTE_DATA)) - return 0; - - client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); - if (!client) - return -ENOMEM; - - strlcpy(client->name, m41t00_chip->name, I2C_NAME_SIZE); - client->addr = addr; - client->adapter = adap; - client->driver = &m41t00_driver; - - if ((rc = i2c_attach_client(client))) - goto attach_err; - - if (m41t00_chip->type != M41T00_TYPE_M41T00) { - /* If asked, disable SQW, set SQW frequency & re-enable */ - if (m41t00_chip->sqw_freq) - if (((rc = i2c_smbus_read_byte_data(client, - m41t00_chip->alarm_mon)) < 0) - || ((rc = i2c_smbus_write_byte_data(client, - m41t00_chip->alarm_mon, rc & ~0x40)) <0) - || ((rc = i2c_smbus_write_byte_data(client, - m41t00_chip->sqw, - m41t00_chip->sqw_freq)) < 0) - || ((rc = i2c_smbus_write_byte_data(client, - m41t00_chip->alarm_mon, rc | 0x40)) <0)) - goto sqw_err; - - /* Make sure HT (Halt Update) bit is cleared */ - if ((rc = i2c_smbus_read_byte_data(client, - m41t00_chip->alarm_hour)) < 0) - goto ht_err; - - if (rc & 0x40) - if ((rc = i2c_smbus_write_byte_data(client, - m41t00_chip->alarm_hour, rc & ~0x40))<0) - goto ht_err; - } - - /* Make sure ST (stop) bit is cleared */ - if ((rc = i2c_smbus_read_byte_data(client, m41t00_chip->sec)) < 0) - goto st_err; - - if (rc & 0x80) - if ((rc = i2c_smbus_write_byte_data(client, m41t00_chip->sec, - rc & ~0x80)) < 0) - goto st_err; - - m41t00_wq = create_singlethread_workqueue(m41t00_chip->name); - save_client = client; - return 0; - -st_err: - dev_err(&client->dev, "m41t00_probe: Can't clear ST bit\n"); - goto attach_err; -ht_err: - dev_err(&client->dev, "m41t00_probe: Can't clear HT bit\n"); - goto attach_err; -sqw_err: - dev_err(&client->dev, "m41t00_probe: Can't set SQW Frequency\n"); -attach_err: - kfree(client); - return rc; -} - -static int -m41t00_attach(struct i2c_adapter *adap) -{ - return i2c_probe(adap, &addr_data, m41t00_probe); -} - -static int -m41t00_detach(struct i2c_client *client) -{ - int rc; - - if ((rc = i2c_detach_client(client)) == 0) { - kfree(client); - destroy_workqueue(m41t00_wq); - } - return rc; -} - -static struct i2c_driver m41t00_driver = { - .driver = { - .name = M41T00_DRV_NAME, - }, - .id = I2C_DRIVERID_STM41T00, - .attach_adapter = m41t00_attach, - .detach_client = m41t00_detach, -}; - -static int __init -m41t00_init(void) -{ - int rc; - - if (!(rc = platform_driver_register(&m41t00_platform_driver))) - rc = i2c_add_driver(&m41t00_driver); - return rc; -} - -static void __exit -m41t00_exit(void) -{ - i2c_del_driver(&m41t00_driver); - platform_driver_unregister(&m41t00_platform_driver); -} - -module_init(m41t00_init); -module_exit(m41t00_exit); - -MODULE_AUTHOR("Mark A. Greer <mgreer@mvista.com>"); -MODULE_DESCRIPTION("ST Microelectronics M41T00 RTC I2C Client Driver"); -MODULE_LICENSE("GPL"); |