summaryrefslogtreecommitdiff
path: root/drivers/i2c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/i2c')
-rw-r--r--drivers/i2c/Kconfig7
-rw-r--r--drivers/i2c/algos/i2c-algo-pca.c3
-rw-r--r--drivers/i2c/busses/i2c-cadence.c28
-rw-r--r--drivers/i2c/busses/i2c-designware-platdrv.c15
-rw-r--r--drivers/i2c/busses/i2c-eg20t.c1
-rw-r--r--drivers/i2c/busses/i2c-mlxcpld.c4
-rw-r--r--drivers/i2c/busses/i2c-qcom-geni.c6
-rw-r--r--drivers/i2c/busses/i2c-rcar.c3
-rw-r--r--drivers/i2c/i2c-core-slave.c7
9 files changed, 49 insertions, 25 deletions
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index ef39c83aaf33..bae1dc08ec9a 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -113,11 +113,18 @@ config I2C_STUB
config I2C_SLAVE
bool "I2C slave support"
+ help
+ This enables Linux to act as an I2C slave device. Note that your I2C
+ bus master driver also needs to support this functionality. Please
+ read Documentation/i2c/slave-interface.rst for further details.
if I2C_SLAVE
config I2C_SLAVE_EEPROM
tristate "I2C eeprom slave driver"
+ help
+ This backend makes Linux behave like an I2C EEPROM. Please read
+ Documentation/i2c/slave-eeprom-backend.rst for further details.
endif
diff --git a/drivers/i2c/algos/i2c-algo-pca.c b/drivers/i2c/algos/i2c-algo-pca.c
index 7f10312d1b88..388978775be0 100644
--- a/drivers/i2c/algos/i2c-algo-pca.c
+++ b/drivers/i2c/algos/i2c-algo-pca.c
@@ -314,7 +314,8 @@ static int pca_xfer(struct i2c_adapter *i2c_adap,
DEB2("BUS ERROR - SDA Stuck low\n");
pca_reset(adap);
goto out;
- case 0x90: /* Bus error - SCL stuck low */
+ case 0x78: /* Bus error - SCL stuck low (PCA9665) */
+ case 0x90: /* Bus error - SCL stuck low (PCA9564) */
DEB2("BUS ERROR - SCL Stuck low\n");
pca_reset(adap);
goto out;
diff --git a/drivers/i2c/busses/i2c-cadence.c b/drivers/i2c/busses/i2c-cadence.c
index 4b72398af505..e4b7f2a951ad 100644
--- a/drivers/i2c/busses/i2c-cadence.c
+++ b/drivers/i2c/busses/i2c-cadence.c
@@ -421,20 +421,21 @@ static irqreturn_t cdns_i2c_master_isr(void *ptr)
/* Read data if receive data valid is set */
while (cdns_i2c_readreg(CDNS_I2C_SR_OFFSET) &
CDNS_I2C_SR_RXDV) {
- /*
- * Clear hold bit that was set for FIFO control if
- * RX data left is less than FIFO depth, unless
- * repeated start is selected.
- */
- if ((id->recv_count < CDNS_I2C_FIFO_DEPTH) &&
- !id->bus_hold_flag)
- cdns_i2c_clear_bus_hold(id);
-
if (id->recv_count > 0) {
*(id->p_recv_buf)++ =
cdns_i2c_readreg(CDNS_I2C_DATA_OFFSET);
id->recv_count--;
id->curr_recv_count--;
+
+ /*
+ * Clear hold bit that was set for FIFO control
+ * if RX data left is less than or equal to
+ * FIFO DEPTH unless repeated start is selected
+ */
+ if (id->recv_count <= CDNS_I2C_FIFO_DEPTH &&
+ !id->bus_hold_flag)
+ cdns_i2c_clear_bus_hold(id);
+
} else {
dev_err(id->adap.dev.parent,
"xfer_size reg rollover. xfer aborted!\n");
@@ -594,10 +595,8 @@ static void cdns_i2c_mrecv(struct cdns_i2c *id)
* Check for the message size against FIFO depth and set the
* 'hold bus' bit if it is greater than FIFO depth.
*/
- if ((id->recv_count > CDNS_I2C_FIFO_DEPTH) || id->bus_hold_flag)
+ if (id->recv_count > CDNS_I2C_FIFO_DEPTH)
ctrl_reg |= CDNS_I2C_CR_HOLD;
- else
- ctrl_reg = ctrl_reg & ~CDNS_I2C_CR_HOLD;
cdns_i2c_writereg(ctrl_reg, CDNS_I2C_CR_OFFSET);
@@ -654,11 +653,8 @@ static void cdns_i2c_msend(struct cdns_i2c *id)
* Check for the message size against FIFO depth and set the
* 'hold bus' bit if it is greater than FIFO depth.
*/
- if ((id->send_count > CDNS_I2C_FIFO_DEPTH) || id->bus_hold_flag)
+ if (id->send_count > CDNS_I2C_FIFO_DEPTH)
ctrl_reg |= CDNS_I2C_CR_HOLD;
- else
- ctrl_reg = ctrl_reg & ~CDNS_I2C_CR_HOLD;
-
cdns_i2c_writereg(ctrl_reg, CDNS_I2C_CR_OFFSET);
/* Clear the interrupts in interrupt status register. */
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index c2efaaaac252..a71bc58fc03c 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -12,6 +12,7 @@
#include <linux/clk-provider.h>
#include <linux/clk.h>
#include <linux/delay.h>
+#include <linux/dmi.h>
#include <linux/err.h>
#include <linux/errno.h>
#include <linux/i2c.h>
@@ -191,6 +192,17 @@ static int dw_i2c_plat_request_regs(struct dw_i2c_dev *dev)
return ret;
}
+static const struct dmi_system_id dw_i2c_hwmon_class_dmi[] = {
+ {
+ .ident = "Qtechnology QT5222",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Qtechnology"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "QT5222"),
+ },
+ },
+ { } /* terminate list */
+};
+
static int dw_i2c_plat_probe(struct platform_device *pdev)
{
struct dw_i2c_platform_data *pdata = dev_get_platdata(&pdev->dev);
@@ -267,7 +279,8 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
adap = &dev->adapter;
adap->owner = THIS_MODULE;
- adap->class = I2C_CLASS_DEPRECATED;
+ adap->class = dmi_check_system(dw_i2c_hwmon_class_dmi) ?
+ I2C_CLASS_HWMON : I2C_CLASS_DEPRECATED;
ACPI_COMPANION_SET(&adap->dev, ACPI_COMPANION(&pdev->dev));
adap->dev.of_node = pdev->dev.of_node;
adap->nr = -1;
diff --git a/drivers/i2c/busses/i2c-eg20t.c b/drivers/i2c/busses/i2c-eg20t.c
index bb810dee8fb5..73f139690e4e 100644
--- a/drivers/i2c/busses/i2c-eg20t.c
+++ b/drivers/i2c/busses/i2c-eg20t.c
@@ -180,6 +180,7 @@ static const struct pci_device_id pch_pcidev_id[] = {
{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7831_I2C), 1, },
{0,}
};
+MODULE_DEVICE_TABLE(pci, pch_pcidev_id);
static irqreturn_t pch_i2c_handler(int irq, void *pData);
diff --git a/drivers/i2c/busses/i2c-mlxcpld.c b/drivers/i2c/busses/i2c-mlxcpld.c
index 2fd717d8dd30..71d7bae2cbca 100644
--- a/drivers/i2c/busses/i2c-mlxcpld.c
+++ b/drivers/i2c/busses/i2c-mlxcpld.c
@@ -337,9 +337,9 @@ static int mlxcpld_i2c_wait_for_tc(struct mlxcpld_i2c_priv *priv)
if (priv->smbus_block && (val & MLXCPLD_I2C_SMBUS_BLK_BIT)) {
mlxcpld_i2c_read_comm(priv, MLXCPLD_LPCI2C_NUM_DAT_REG,
&datalen, 1);
- if (unlikely(datalen > (I2C_SMBUS_BLOCK_MAX + 1))) {
+ if (unlikely(datalen > I2C_SMBUS_BLOCK_MAX)) {
dev_err(priv->dev, "Incorrect smbus block read message len\n");
- return -E2BIG;
+ return -EPROTO;
}
} else {
datalen = priv->xfer.data_len;
diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c
index 18d1e4fd4cf3..7f130829bf01 100644
--- a/drivers/i2c/busses/i2c-qcom-geni.c
+++ b/drivers/i2c/busses/i2c-qcom-geni.c
@@ -367,7 +367,6 @@ static int geni_i2c_rx_one_msg(struct geni_i2c_dev *gi2c, struct i2c_msg *msg,
geni_se_select_mode(se, GENI_SE_FIFO);
writel_relaxed(len, se->base + SE_I2C_RX_TRANS_LEN);
- geni_se_setup_m_cmd(se, I2C_READ, m_param);
if (dma_buf && geni_se_rx_dma_prep(se, dma_buf, len, &rx_dma)) {
geni_se_select_mode(se, GENI_SE_FIFO);
@@ -375,6 +374,8 @@ static int geni_i2c_rx_one_msg(struct geni_i2c_dev *gi2c, struct i2c_msg *msg,
dma_buf = NULL;
}
+ geni_se_setup_m_cmd(se, I2C_READ, m_param);
+
time_left = wait_for_completion_timeout(&gi2c->done, XFER_TIMEOUT);
if (!time_left)
geni_i2c_abort_xfer(gi2c);
@@ -408,7 +409,6 @@ static int geni_i2c_tx_one_msg(struct geni_i2c_dev *gi2c, struct i2c_msg *msg,
geni_se_select_mode(se, GENI_SE_FIFO);
writel_relaxed(len, se->base + SE_I2C_TX_TRANS_LEN);
- geni_se_setup_m_cmd(se, I2C_WRITE, m_param);
if (dma_buf && geni_se_tx_dma_prep(se, dma_buf, len, &tx_dma)) {
geni_se_select_mode(se, GENI_SE_FIFO);
@@ -416,6 +416,8 @@ static int geni_i2c_tx_one_msg(struct geni_i2c_dev *gi2c, struct i2c_msg *msg,
dma_buf = NULL;
}
+ geni_se_setup_m_cmd(se, I2C_WRITE, m_param);
+
if (!dma_buf) /* Get FIFO IRQ */
writel_relaxed(1, se->base + SE_GENI_TX_WATERMARK_REG);
diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c
index a45c4bf1ec01..2e3e1bb75013 100644
--- a/drivers/i2c/busses/i2c-rcar.c
+++ b/drivers/i2c/busses/i2c-rcar.c
@@ -868,6 +868,7 @@ static int rcar_unreg_slave(struct i2c_client *slave)
/* disable irqs and ensure none is running before clearing ptr */
rcar_i2c_write(priv, ICSIER, 0);
rcar_i2c_write(priv, ICSCR, 0);
+ rcar_i2c_write(priv, ICSAR, 0); /* Gen2: must be 0 if not using slave */
synchronize_irq(priv->irq);
priv->slave = NULL;
@@ -969,6 +970,8 @@ static int rcar_i2c_probe(struct platform_device *pdev)
if (ret < 0)
goto out_pm_put;
+ rcar_i2c_write(priv, ICSAR, 0); /* Gen2: must be 0 if not using slave */
+
if (priv->devtype == I2C_RCAR_GEN3) {
priv->rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL);
if (!IS_ERR(priv->rstc)) {
diff --git a/drivers/i2c/i2c-core-slave.c b/drivers/i2c/i2c-core-slave.c
index 5427f047faf0..1589179d5eb9 100644
--- a/drivers/i2c/i2c-core-slave.c
+++ b/drivers/i2c/i2c-core-slave.c
@@ -18,10 +18,8 @@ int i2c_slave_register(struct i2c_client *client, i2c_slave_cb_t slave_cb)
{
int ret;
- if (!client || !slave_cb) {
- WARN(1, "insufficient data\n");
+ if (WARN(IS_ERR_OR_NULL(client) || !slave_cb, "insufficient data\n"))
return -EINVAL;
- }
if (!(client->flags & I2C_CLIENT_SLAVE))
dev_warn(&client->dev, "%s: client slave flag not set. You might see address collisions\n",
@@ -60,6 +58,9 @@ int i2c_slave_unregister(struct i2c_client *client)
{
int ret;
+ if (IS_ERR_OR_NULL(client))
+ return -EINVAL;
+
if (!client->adapter->algo->unreg_slave) {
dev_err(&client->dev, "%s: not supported by adapter\n", __func__);
return -EOPNOTSUPP;
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-23 17:21:18 +0000